Snapper 0-50576 manual

Actual product may differ from product pictured above Manual No. 7100056 (I.R. 03/31/05) Modelscovered: Blower Kit Bagger Kit Weight Kit Complete Kit P/N 7078273 PIN 0-50576 P/N 7078274 P/N 7063375[...]

CllnutlnJllflln$! You have just purchased one of the finest pieces of outdoor power equipment on the market today. If properly cared for, your new Z-Vac Grass Catcher Kit will provide years of dependable service. Please read and follow this instruction man- ual carefully in order to get the most out of your new equipment. As you carefully unpack yo[...]

ImPS#TMTI7 ## CBgJl! Y mttSWl#8 #JIB BgS#f J$$EmB£1N8 8R 8PELq77N8 TRAINING -- Read, understand, and follow all instructions in the man- ual and on the unit before starting. If the operator(s) or mechanic(s) can not read English it is the owner's responsi- bility to explain this material to them. -- Become familiar with the safe operation of [...]

CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and its activity. Never assume that children will remain where you last saw them. -- Keep children out of the mowing area and under the watchful care of another responsible adult. -- Do not allow children or others [...]

BLOWER KIT INSTALLATION STEP 1 : Remove pin, rod and spring securing dis- charge deflector to mower deck, and remove deflector. Store deflector for future use. IMPOR- TANT: Never operate any mower without a dis- charge deflector or grass catcher securely in place. STEP 2: Remove two bolts securing right deck pul- ley guard to mower deck and remove [...]

REMOVE BOLTS, HEN REMOVE OVER STEP 6a: Remove bolts securing impeller pulley cover to blower, and remove cover. STEP 6b: Check to see that blower belt is routed around impeller pulley and idler pulleys after belt is installed onto deck pulley. Then replace cover. Tighten bolts securely. IMPORTANT: Never oper- ate any mower without a pulley guard se[...]

STEP 9: Install belt guard between pulley guard andbelt guard support clipon frontpart of blower mount. Secure with two 5/16 nylon wing nuts. Tighten nuts securely. WEIGHT KIT INSTALLATION !! Warning: Weight kit must be installed prior to installing bagger unit. Failure to do so may result in Iongitudal tipping of unit. STEP 10: Insert the four nar[...]

INSERT PIN INTO ROD HOOK BAGGER FRAME ONTO BUMPER MOUNT PLATE PINS STEP 13: Hook bottom of bagger frame onto pins in bottom of bumper mount plate. Then slide lock- ing rod through aligned holes in bagger flame and bumper mount plate, securing with bridge pin. CROSS ASSEMBLY STEP 14: Install cross assembly onto bagger frame with four 3/8-16 x 3/4 bo[...]

STEP 18: Installbags onto cross assembly by hooking slot in bag hanger onto tabs in channel assembly. STEP 19: Close cover andlock in place by hook- ing lock knob into slot in cover latch arm. STEP 20: Slip onehoseclamp onto each end of hose(use the clamp withthe black quick-release knob at the blower end), andinstall hose between blower and bagger[...]

INTRODUCTION Follow operation and maintenance instructions in the Operator's Manual provided with the Snapper CZT/HZT. GRASS CATCHER OPERATION 1. Select desired cutting height. Choose a setting that will not attempt to cut off too much at once, overloading the machine. 2. After starting engine and allowing a brief warm up peri- od, move engine[...]

IF THE GRASS CATCHER BECOMES CLOGGED (Continued FromPrevious Page) To Clear A Plugged Hose 1. Stop blades. Stop engine. Remove key. 2. After all rotating components (engine, blower, blades) have come to a complete stop, loosen hose clamp at outlet of blower, and remove hose from blower. 3. Clear any obstructions from hose. If necessary, use a stick[...]

30 18 27 25 22 : _25 26 24 25 24 25 28 BLOP_ER UNIT GROUP CZT / HZT Models * Grease Fitting Orientation 12[...]

Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2O 21 22 23 24 25 26 27 28 29 3O Part No. 3046782 91121 90183 3021097 44995 91804 14409 10776 3046824 91527 3047253 91601 91218 3046781 3046853 91541 3022832 90839 3031920 3046854 3031919 90613 3046813 3043613 90122 91560 91518 91305 92111 91541 aty 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 7 2 8 4 1 4 2 2 2[...]

6 S 4 BLOWER _ G,_JP CZT 1 _T Mo, de_s 14[...]

Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2O Part No. 3036323 3037161 91537 3037162 3046806 78298 3027505 3027507 91541 3027508 91304 90613 3032118 91527 91601 90951 3020807 12315 91617 aty 1 1 2 1 1 1 1 1 4 1 2 4 1 1 1 2 1 1 1 apBer l-mc We r mun! 8 #p - Description BELT, A Section, 91.125" effective length WELDMENT, Belt Cover, De[...]

t 2 42 25 3 / / / / 26 'Z-VAC' CATCHER GROUP CZT/HZT Models 16[...]

Item 18 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2O 21 22 23 24 25 26 27 28 29 3O 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Part No. 3046861 1704033 1704180 1704405 1667248 1910531 90922 91702 3021670 90376 3022838 0960367 1703700 1704057 91578 1675707 1703807 90316 1703855 3000847 1672023 90187 91511 3022875 3022833 3022876 91757 91290 150[...]

See Catcher Group 1 2 5 SNAPPER 'Z-VAC' CA TCHER MOUNT GROUP CZT /HZT Models Fastens to Rear Bumper Assembly of Mower 11 18[...]

Item 1 2 3 4 4a 5 6 7 8 9 10 11 12 Part No. 3046687 91086 91619 3046831 3046829 91318 91601 3046995 50551 91318 91601 3046693 15067 3039122 3039123 Qty. 1 4 4 1 1 2 2 1 2 4 4 1 1 1 1 aplmr l-mc CK er mum S lp - Description WELDMENT, Bagger Mount Frame SCREW, 3/8-16 x 3/4" Hex Head Cap, GR5 NUT, 3/8-16 Hex Flange Lock ARM, Cover Latch REINFORCE[...]

Place Against Front of Footrest Slide Through Opening in Footrest 2 WEIGHT BAR GROUP CZT 1 HZT ModeJs 20[...]

Item 1 2 3 4 5 Part No. 78288 78289 91821 90254 91316 Qty. 5 4 2 2 2 Description SnappK Z-I/ac WelUM Bar SNm- WEIGHT, 27 x 5 x 114" WEIGHT, 27 x 2-1/2 x 114" BOLT, 1/2-13 x 3" Hex Head WASHER, 1/2" Split Lock NUT, 1/2-13 Hex CH/ medel$ 21[...]

2 5 NOTE: Decals are not to scale. 22[...]

Item 1 2 3 4 5 Part No. 3046944 1704405 3046850 3046851 3046883 Qty. 1 1 1 1 1 Description _apmr Z-I/at Jeu! 8nip- DECAL, Fast-Vac DECAL, Safety, Grass Bag DECAL, Danger, Fast-Vac DECAL, Warning, Fast-Vac DECAL, Warning, Fast-Vac CH/_medel$ 23[...]

2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in material or[...]

25[...]

26[...]

27[...]

Grass Catcher Kit forCZT/IlZT Series 0 McDonough, GA 30253 U.S.A. Manual No. 7100056 (I.R. 03/31/05)[...]