Sharp XL-UH2080H manual

MICRO COMPONENT SYSTEM MODEL OPERATION MANUAL XL-UH2080H XL-UH2080H Micro component system consisting of XL-UH2080H (main unit) and CP-UH2080H (speaker system). Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. SHARP CO[...]

2 XL-UH2080H General Information Special notes WARNINGS z When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/ STAND- BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote co ntrol. z This unit contains no user serviceable parts. Nev[...]

3 XL-UH2080H General Information Special Note Supply of this product does not conv ey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or othe r distribution channels), revenue- generating streaming applications (via Internet, intranets and/or ot[...]

4 XL-UH2080H General Information Precautions  General z Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipme nt. z Do not place anything on top of the un it. z Do not expose the unit to moisture, to temperatures higher[...]

5 XL-UH2080H General Information Controls and indicators  Front panel Reference page 1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2. On/Stand-by Butto n . . . . . . . . . . . . . . . . . . 12, 13, 14, 24, 32 3. Disc T ray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 14 4. Time[...]

6 XL-UH2080H General Information Controls and indicators (continued)  Display Reference page 1. MP3/WMA Folder Indicato r . . . . . . . . . . . . . . . . . . . . . . 19, 21 2. MP3/WMA Title Indica tors . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1[...]

7 XL-UH2080H General Information  Remote control Reference page 1. Remote Control Transm itter . . . . . . . . . . . . . . . . . . . . . . . . 11 2. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . 13 , 31, 32, 33 3. Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4. Equaliser Mode Select Butt on [...]

8 XL-UH2080H Preparation for Use System connections Right speaker FM aerial Wall socket (AC 220 - 240V ~ 50Hz) Left speaker AM loop aerial  AC power connection (see page 10)  Aerial connection (se e page 9)  Speaker connection (see page 9) Make sure to u nplug the AC power le ad before making any connections[...]

9 XL-UH2080H Preparation for Use  Aerial connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direct ion where the strongest signal can be received. Supplied AM loop aerial: Connect the AM loop aerial to the AM and GND (Earth) terminals. Position the AM loop aerial for optimum [...]

10 XL-UH2080H Preparation for Use System connections (continued)  AC power connection After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will ent er the demonstration mode. Note: Unplug the AC power lead from the wall socket if t he unit w[...]

11 XL-UH2080H Preparation for Use Remote control  Battery instal lation Precautions for battery use: z Replace all old batteries with new ones at the same time. z Do not mix old and new batteries. z Remove the batteries if the unit will not be used for long periods of time. This will prevent poten tial damage due to batte ry leakage. Caution: z [...]

12 XL-UH2080H Basic Operation General control  To turn the power on Press the ON/ST AND-BY b utton to tur n the power on.  Illumination light control When the unit’ s power is tur ned on, the ring a round the volume control lights up. T o tur n on/off the light, hold down the CLEAR/DIMMER button on the remote control f or more than 2 second[...]

13 XL-UH2080H Basic Operation Setting the clock (R emote Control only) In this example, the clock is set for the 24-hour (0:00) display. T o co nfirm the time display: [When the unit is in the stand-by mode] Press the CLOCK/TIMER button. The time display will appear f or about 10 seconds. [When the power is on] Press the CLOCK/TIMER button. Within [...]

14 XL-UH2080H CD or MP3/WMA disc Playback Listening to a CD or MP3/WMA disc This system can play back a standard CD , CD -R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be pla yable due to the state of the disc or the device that was used f or recording. MP3: MP3 is a form[...]

15 XL-UH2080H CD or MP3/WMA disc Playback z After the last track is pla yed, the unit will stop automatically . To remove the discs: In the stop mode, press the OPEN/CLOSE button. Caution: z Do not place two discs in one disc tra y . z Do not play discs of special shapes (heart, octagon, etc). It may cause malfunctions. z Do not push the disc tray [...]

16 XL-UH2080H CD or MP3/WMA disc Playback Advanced CD or MP3/WMA disc playback  Direct trac k search By using the direct search butt ons, the desired tracks on the current disc can be played. Notes: z A track number higher than the number of tracks on the d isc cannot be selected. z During random play, direct search is not possible . To stop pla[...]

17 XL-UH2080H CD or MP3/WMA disc Playback  Random play The trac ks on the disc can be pla yed in random order au tomatically . To cancel random play: Press the PLAY MODE button. “R” will disappear. Notes: z If you press the button during random play, you can move to the track selected next by the random operation. On the other hand, the butt[...]

18 XL-UH2080H CD or MP3/WMA disc Playback Advanced CD or MP3/WMA disc playback (continued) To cancel the programmed play mode: Whilst in the stop mode a nd the “MEMOR Y” indicator is lit, press the CLEAR/DIMMER button on the remote control. The “MEMORY” indicator will disappear and al l the programmed contents will be cleared. Adding tracks[...]

19 XL-UH2080H CD or MP3/WMA disc Playback Folder mode on/off can be operated by the F OLDER button on the remote control. Files that are played when folder mode is set to the on position, may differ from those played back when folder mode is turned off. Folder Mode Off case: All the files starting from the selected file will be played back. If file[...]

20 XL-UH2080H USB Memory Playback MP3/WMA folder mode (only for MP3/ WMA files) (continued) Note: If “NO SUPPOR T ” is displayed, it means “Copyright protected WMA file” or “Not supported playback file” is selected. Listening to USB mass storage device / MP3 Pla yer Note: This product is not compatible with MTP and AAC file systems. [...]

21 XL-UH2080H USB Memory Playback Note: To pause playback: Press the USB / button. Auto power off funct ion: In the stop mode of USB operation, the main unit enters the stand-by mode after 15 minutes of inactivity.  T o play bac k USB/MP3 Player with Folder mode on Note: To pause playback: Press the USB / button. Auto power off fun ction: In the[...]

22 XL-UH2080H USB Memory Playback T o remo ve USB memor y device Notes: z SHARP will not be held liable for the loss of da ta whilst the USB memo ry device is con- nected to the audio system. z Files compressed in MP 3 and / or WMA f or mat can be pla yed bac k when connected to the USB terminal. z This USB me mor y’ s format supports F A T 16 or[...]

23 XL-UH2080H Radio Note: Notes: z This unit only supports “MPEG- 1 Audio Layer-3” format. (Sampling Frequency is 32, 44.1, 48kHz) “MPEG-2 Audio Layer-3” , “MPEG-2.5 Audio Layer-3” and MP1, MP2 format are not supported. z Programme playback for USB memory is not available. z Playback order for MP3 files may differ sometimes depending on[...]

24 XL-UH2080H Radio Listening to radio (continued)  Tuning Notes: z When radio interference occurs, auto scan tuning may stop automatically at that point. z Auto scan tuning will ski p weak signal stations. z To stop th e auto tuni ng, press th e TUNING ( or ) button a gain. z When an RDS (Radio Data System) station is tun ed in, the frequency w[...]

25 XL-UH2080H Advanced Features  To recall a memorise d station  To scan t he preset stations The stations saved in memo ry can be scanned automatically. (Preset memory scan)  To erase entir e preset memory Using t he Radio Data System (RDS) RDS is a broadcasting service which a growing numb er of FM stations provide. These FM stations sen[...]

26 XL-UH2080H Advanced Features Using the Radio Data Sy stem (RDS) (continued)  Information provided by RDS Each time the RDS DISPLAY button is pressed, the display will switch as follows: When you are tuning in to a station other than an RDS station or to an RDS station which sends weak signal, the display will change in the following order: ?[...]

27 XL-UH2080H Advanced Features To stop the ASPM operation b efore it is complete: Press the RDS ASPM button whilst it is scanning for stations. The stations which are already stor ed in memory will be kept there. Notes: z If the same station is broadcasti ng on different frequencies, the strongest frequency will be stored in memory. z Any station [...]

28 XL-UH2080H Advanced Features Using the Radio Data Sy stem (RDS) (continued)  To recall stations in memory To specify programmed types and select stations (PTY search): You can search a station by specifying the programme type (news, sports, traffic programme, etc. ... see pages 29 - 30) from the stations in memory. Advanced Features Notes: z [...]

29 XL-UH2080H Advanced Features Descriptions of the PTY (Programme Type) cod es, TP (Traffic Programme)TA (Traffic Announcement). You can search for and receive the following PTY, TP and TA signals. Advanced Features NEWS Short accounts of facts, events and publicly expressed views, reportage and actuality. AFFAIRS Topical programme expanding or en[...]

30 XL-UH2080H Advanced Features Using the Radio Da ta System (RDS) (continued) Timer and sleep operation (Remote Control only) Timer playback: The unit turns on and plays the desired source (CD , TU NER, USB, A UDIO IN) at a preset time. Using the once timer and daily timer in combinatio n: F or example , use the on ce timer to listen to a radio pr[...]

31 XL-UH2080H Advanced Features  Timer playback Before setting timer: Advanced Features 1 Check that the clock is set to the correct time (refer to page 13). If it is not set, you cannot use the timer function. 2 For timer playback: Load disc to be played. 1 Press the ON/STAND -BY button to turn the power on. 2 Press the CLOCK/TIMER butt on. 3 W[...]

32 XL-UH2080H Advanced Features Timer and sleep operation (Rem ote Control only) (continued) Notes: Checking the timer setting in the timer stand-by mode: Cancelling the timer s etting in the timer stan d-by mode: Reusing the memorised timer setting: The timer setting will be memorised once it is entered. To reuse the same setting, perform th e fol[...]

33 XL-UH2080H Advanced Features  Sleep operati on The radio, compact disc and USB can be turned off automatically. To confirm the remaining sleep time: To cancel the sleep operation : Press the ON/STAND-BY button whilst “SLEEP” is indicated. To cancel the sleep operation wit hout setting the unit to t he stand-by mode, proceed as follows. ?[...]

34 XL-UH2080H Advanced Features Enhancing your system The connection lead is not included. Purchase a commercially avail- able lead as shown below. Auto power on function (AUDIO IN) : When you press any of the following bu ttons, the unit turns on. z A UDIO IN button (main unit an d remote control): The unit turns on and the “A UDIO IN” functio[...]

35 XL-UH2080H References  Subwoofer connection When a commercially available subwoof er with a built-in amplifier is connected to this unit, you can enjoy sound with emphasised bass. Connect an RCA lead from a commercially available speaker with a built-in amplifier to the SUBWOOFER PRE-OUT socket. Troubleshooting chart Many potential problems c[...]

36 XL-UH2080H References T roubleshooting c har t (continued)  Remote Control  Tuner  USB  Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause c ondensation inside the cabinet (CD pickup, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunctio[...]

37 XL-UH2080H References  Care of compact discs Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of di rt on the disc surface. Follow the guidelines below for maximum enj oyment from your CD collec- tion and player. z Do not write on either side of th e disc, particularly the non-label side from [...]

38 XL-UH2080H References Specifications (continued)  CD player  Tuner  Speaker  USB Type Single disc multi-play compact disc player Signal readout Non-contact, 3-beam semiconductor laser pickup D/A converter Multi bit D/A converter Frequency response 20 - 20,000 Hz Dynamic range 90 dB (1 kHz) Frequency ra nge FM: 87.5 - 108 MHz AM: 522 [...]

FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.au OR CALL SHARP CUSTOMER CARE 1300 135 022 SHARP CORPORATION OF AUSTRALIA PTY LTD (LOCAL CALL COST APPLY WITHIN AUSTRALIA) FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP CORPORATION OF NEW ZEALAND LIMI[...]

This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the date of original purchase. The owner is responsible for any transportation and insurance costs if the product has to be returned for repair. This warranty does not extend to accessories or defects or injuries caused by or resulting[...]