Sharp AR-M160 manual

MODEL AR-M160 AR-M205 DIGITAL MULTIFUNCTIONAL SYSTEM SOFTWARE SETUP GUIDE • INTRODUCTION • SOFTWARE FOR THE SHARP AR-M160/M205 • BEFORE INSTALLATION • INSTALLING THE SOFTWARE • CONNECTING TO A COMPUTER • CONFIGURING THE PRINTER DRIVER • SETTING UP BUTTON MANAGER • HOW TO USE THE ONLINE MANUAL • TROUBLESHOOTING 1 2 3 4 10 11 12 14 [...]

!install_ar160205.bo ok 2 ページ ２０ ０３年５月２６ 日　月曜日　午後 １２時９分[...]

1 INTRODUCTION This manual explains how to install and configure the softw are that is required for the printe r and scanner functio ns of the machine. The proced ure for viewing the Onlin e Manual is also explained. Trademark acknowledgments •M i c r o s o f t ® Windows ® operating system is a trademark or copyrigh t of Microsoft Corporation i[...]

2 SOFTWARE FOR THE SHARP AR-M160/M205 The CD-ROM that accompanie s the machine c ontains the following software: MFP driver Printer driver The printer driver enables you to use the printer function of the machin e. There are two type s of printer drivers for the machine: a standard prin ter driver and a print er driver* that is used when the dual f[...]

3 BEFORE INSTALLATION HARDWARE AND SOFTWARE REQUIREMENTS Check the following hardware and softwar e requirements befor e installing the softwar e. *1 The machine's USB 2.0 port will transfer dat a at the speed specifie d by the USB 2.0 (Hi-Speed) only if the Microsoft USB 2.0 driver is preinstalled in the computer, or if the USB 2.0 driver for[...]

4 INSTALLING THE SOFTWARE INSTALLATION IN WINDOWS XP (USB/PARALLEL CABLE) 1 The USB or paralle l cable must not be connected to the m achine. Make sure that the cable is not connected before proceeding. If the cable is connected, a Plug and Play window will appear. If this happens, click the "Cancel" button to close the window and disconn[...]

5 INSTALLING THE SOFTWARE 7 The files required for installation of the MFP driver are copied (if "MFP Driver" was selected in Step 5). Follow the on-screen instructions. When you are asked how th e printer is connected, select "Connected to this computer" and clic k the "Next" button. When "The MFP driver inst all[...]

6 INSTALLING THE SOFTWARE INSTALLATION IN WINDOWS 98/ME/2000 (USB CABLE) 1 The USB cable must not be connected to the mach ine. Make sure that the ca ble is not connected before proceeding. If the cable is connected, a Plug and Play window will appear. If this happens, click the "Cancel" button to close the window and disconnect the cable[...]

7 INSTALLING THE SOFTWARE 8 Begin the installa tion of Button Manager (if "Button Manager" was selected in Step 5). Follow the on-screen instructions. Click the "Finish" button when the message informs you that se tup is successful. The Sharpdesk inst aller will start. 9 Begin the installa tion of Sharpdesk (if "Sharpdesk&q[...]

8 INSTALLING THE SOFTWARE INSTALLATION IN WIND OWS 95/98/ME/NT4.0/2000 (PARALLEL CABLE) 1 The USB or paralle l cable must not be connected to the m achine. Make sure that the cable is not connected before proceeding. If the cable is connected, a Plug and Play window will appear. If this happens, click the "Cancel" button to close the wind[...]

9 INSTALLING THE SOFTWARE 10 Select the printer port and click the "Next" button. Select "LPT1" for the printer port. 11 When asked to select the printer driver to install, select the appropriate printer driver based on whether or not the dual function boar d is installed, and then click t he "Next" button. If the dual[...]

10 CONNECTING TO A COMPUTER Follow the procedure below to connec t th e machine to your computer. Interface cables for connectin g the machine to your compute r are not included with the machine. Plea se purchase the appropriate cable for your compute r. Interface cable USB cable Shielded twisted pair cable, high-speed transmission equivalent (9 fe[...]

11 CONNECTING TO A COMPUTER CONNECTING A PARALLEL CABLE 1 Ensure that your computer and the machine are turned off. 2 Plug the cable into the parallel port on the machine, and fasten with the cla sps. 3 Plug the other end of the cable into your computer's parallel port. CONFIGURING THE PRINTER DRIVER After installing the MFP d river (printer d[...]

12 SETTING UP BUTTON MANAGER Button Manager is a so ftware program that works with the scanner dri ver to enable scanning from the operation panel of the machine. To scan using the operation panel of the ma chine, Button Manager must be linked with the scan menu keys on the machine. Follow the steps belo w to link Button Manager to scanner events. [...]

13 SETTING UP BUTTON MANAGER Windows 98/Me/2000 1 click the "Start" button, select "Settings", and then click "Control Panel". 2 Double-click the "Scanners and Cameras" icon. 3 Select "AR-XXXX", and click the "Properties" button. In Windows Me, right click "AR-XXXX" and click &qu[...]

14 HOW TO USE THE ONLINE MANUAL The Online Manu al provides detailed instructions for operat ing the machine as a printer or scann er. View the Online Manual when you use the printer and scanner fu nctions after the initial setup is completed . Contents of t he Online Manual The contents of the Online Manual are as follows. How to use the Online Ma[...]

15 TROUBLESHOOTING If the software does not install correctly, check the following items on your computer. To remove the software, see "Removing the software" (p. 61) in the Op eration Manual. Troubleshooting informatio n can also be found in the READ ME file s for each of the software programs. To view a README file, click the "Disp[...]

16 TROUBLESHOOTING The MFP driver cannot be correctly installed by Plug and Play (Windows 2000/XP) In Windows 2000/XP, if the MFP driver ca nnot be correctly installed by Plug an d Play (for example, Plug and Play takes place without copying the required files for the MFP driver installa tion), follow these steps to remove unneeded devices and then[...]

!install_ar160205.bo ok 1 ページ ２０ ０３年５月２６ 日　月曜日　午後 １２時９分[...]

PRINTED IN CHINA 2003E KS ➀ TINSE0933QSZZ Printed on 100% post-consumer recycled paper AR-M160/AR-M205 SHARP CORPORA TION !install_ar160205.bo ok 2 ページ ２０ ０３年５月２６ 日　月曜日　午後 １２時９分[...]