Sanyo PLV-55WM1 manual

LCD Pr ojection Monitor MODEL PL V -55WM1 Owner’ s Manual[...]

2 T able of Contents TRADEMARKS ● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. ● IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. ● Each name of corporations or products in the owner's manual is a trademark or a registered trademark [...]

3 To the Owner CAUTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE [...]

4 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this LCD Projection Monitor from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and i[...]

5 Compliance AC Po wer Cord f or the Unit ed Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the plu[...]

6 Features and Design This LCD Projection Monitor is designed with the most advanced technology for various use. This LCD Projection Monitor has a large screen and utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility The LCD Projection Monitor widely accepts [...]

7 Installing the LCD Pr ojection Monitor Openings on the cabinet are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. Therefore, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the LCD Projection Monitor, the followin[...]

8 Fr ont PO WER LAMP REPLACE W ARNING INPUT MENU SELECT d e + 7 8 ECO V OLUME INPUT 5 VIDEO L–A UDIO–R (MONO) RESET (VIDEO CONFERENCE) !0 INPUT button Used to select the input source. (p25, 26, 27, 33, 34) o MENU button Used to select the On-Screen Menu operation. (p21) t Infrared Remote Receiver !2 POWER indicator It lights red when the LCD Pr[...]

9 Part Names and Functions NOTE: ● This LCD Projection Monitor detects internal temperature and automatically controls the running speed of the cooling fans. q Exhaust Vent Back w Terminals and Connectors (p11) q w q e Power Cord Connector e Pa rt Names and Functions[...]

10 Part Names and Functions INPUT MENU OK 7 INPUT 5 VIDEO L–A UDIO–R (MONO) RESET (VIDEO CONFERENCE) q * RESET A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function e[...]

11 Part Names and Functions q INPUT 1 Connect computer (Digital DVI-D type) and audio outputs to these terminals. (p16, 17) ● RGB (PC DIGITAL / AV HDCP) (DVI-D) ● AUDIO R and L (MONO) (RCA-type) Rear T er minals Y – Pb/Cb – Pr/Cr INPUT 1 R–A UDIO–L R–A UDIO–L (MONO) (MONO) V S-VIDEO AU D IO R–A UDIO–L (MONO) ANALOG DIGIT AL(DVI-[...]

12 LL LAMP MENU SCREEN SELECT INPUT 2 INPUT 1 LAMP CONTROL AUTO PC FREEZE V OLUME + MU TE A UDIO-S SURRO UND INPUT 3 INPUT 4 INPUT 5 Part Names and Functions q w e t !4 AUTO PC button Operate the Auto PC adjustment function. (p36) r Point (Up e e / Down d d / Left 7 / Right 8 ) buttons Select the item or adjust the value in the On-Screen Menu. Thes[...]

13 Part Names and Functions To insure safe operation, please observe the following precautions : ● Use two AA, UM3 or LR06 type alkaline manganese batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the remote control to moisture or heat[...]

14 Part Names and Functions This LCD Projection Monitor has 8 different remote control codes (Code 1 - Code 8). Switching remote control codes prevents remote control interference when operating several equipment at the same time. Change the remote control code of the LCD Projection Monitor first before changing that of the remote control. See “R[...]

15 This LCD Projection Monitor uses nominal input voltages of 100- 120 V or 200-240 V AC. This LCD Projection Monitor automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of an electrical shock, do not plug into any other type of the power sys[...]

16 Preparation Connecting to a Comput er and Video Equipment (V ideo, S-V ideo) P8FK Y – Pb/Cb – Pr/Cr INPUT 1 R–AUDIO–L R–AUDIO–L (MONO) (MONO) V S-VIDEO AUDIO R–AUDIO–L (MONO) ANALOG DIGIT AL(DVI-D) OUTPUT 1 INPUT 2 INPUT 4 ANALOG AUDIO SERIAL PORT INPUT 3 H/V R B G VIDEO (VIDEO CONFERENCE) Y – Pb/Cb – Pr/Cr VIDEO (VIDEO CONFE[...]

17 Preparation P8FK Y – Pb/Cb – Pr/Cr INPUT 1 R–AUDIO–L R–AUDIO–L (MONO) (MONO) V S-VIDEO AUDIO R–AUDIO–L (MONO) ANALOG DIGIT AL(DVI-D) OUTPUT 1 INPUT 2 INPUT 4 ANALOG AUDIO SERIAL PORT INPUT 3 H/V R B G VIDEO (VIDEO CONFERENCE) Y – Pb/Cb – Pr/Cr VIDEO (VIDEO CONFERENCE) Video Equipment Video/Component Output (Y, Pb/Cb, Pr/Cr) Y[...]

18 Tu r ning Of f the LCD Pr ojection Monitor Tu r ning On the LCD Pr ojection Monitor Basic Operation Press the POWER ON-OFF button on the front panel or on the remote control. The POWER indicator turns into orange, and it continues while the cooling fans are operating (for about 4 minutes). The LCD Projection Monitor can be turned on again during[...]

19 Basic Operation Volume Press the VOLUME +/– button on the front panel or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Press + button to turn up the volume and – button to turn it down. Mute Press the MUTE button on the remote control to minimize the sound. To restore the sound to [...]

20 Basic Operation Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button. MENU SCREEN SELECT INPUT 1 FREEZE FREEZE V OLUME + MUTE FREEZE button Remote Control Pictur e Fr eeze F unction Lamp mode can be selected from the following mod[...]

21 Basic Operation Press the MENU button to display the On-Screen Menu (Main menu). Select a menu from the main menu by pressing the Point Up / Down button, and press the Point Right button to enter the sub-menu. (The selected icon turns yellow.) Press the MENU button to close the On-Screen Menu when you are in the main menu. When you are in the su[...]

22 Basic Operation Menus VIDEO MENUS Input Menu: select video input source. (p25-27) AV System Menu: select video system from Auto, PAL, SECAM, NTSC4.43, NTSC, 1080i, 720p, 575p, 480p, 575i and 480i. (p28) Image Select Menu: select image level from Standard, Cinema1, Cinema2, Game, Dynamic and Image. (p29) Image Adjust Menu: adjust Contrast, Bright[...]

23 Basic Operation COMPUTER MENUS Input Menu: select computer input source. (p33-34) PC System Menu: select computer system. (p35) Image Select Menu: select image level from Standard, Real, Dynamic and Image. (p39) Image Adjust Menu: adjust Contrast, Brightness, Color temp., White balance (R/G/B), Sharpness or Gamma and use Reset or Store. (p40) Sc[...]

24 Basic Operation A udio Adjustment 1 2 Select the Audio Adjustment menu with the Point Up / Down button, and then press the Point Right button to enter the sub- menu. Select an item with the Point Up / Down button and press the Point Left / Right button to adjust the item. Audio Adjust Menu Menu Operation Press the Point Left button to decrease h[...]

25 INPUT 1 INPUT 2 INPUT button Input Source Selection (INPUT 3 / R GB , Video (V ideo conf er ence), Component) Direct Operation FREEZE + AUDIO-S SURROUND INPUT 3 INPUT 4 INPUT 5 Front Panel Remote Control INPUT button INPUT MENU SELECT 7 V O – A UDIO–R Select INPUT 3 by pressing the INPUT 3 button on the remote control or pressing the INPUT b[...]

26 Vi deo Input Input Source Selection (INPUT 4 / V ideo (Video conf erence), S-video , Component) Direct Operation Select INPUT 4 by pressing the INPUT 4 button on the remote control or pressing the INPUT button on the front panel arbitrary number of times. Before using these buttons, correct input source should be selected through menu operation [...]

27 Vi deo Input Input Source Selection (INPUT 5 / V ideo (Video conf erence) ) Direct Operation Select INPUT 5 by pressing the INPUT 5 button on the remote control or pressing the INPUT button on the front panel arbitrary number of times. See p17 for the connection diagrams. Select the Input Menu with the Point Up / Down button, and then press the [...]

28 Vi deo Input AV System Menu (Video or S-Video) AV System Menu (Component) Select the AV System Menu with the Point Up / Down button, and then press the Point Right button to enter the sub-menu. Choose the system that you want to select with the Point Up / Down button and then press the SELECT button. 1 2 If the LCD Projection Monitor cannot repr[...]

29 Vi deo Input Image Select Menu Image Lev el Selection SELECT INPUT 2 INPUT 1 FREEZE FREEZE V OLUME + MUTE Remote Control IMAGE button Select the Image Select Menu with the Point Up / Down button, and then press the Point Right button to enter the sub-menu. 1 2 Choose the level that you want to select with the Point Up / Down button and then pres[...]

30 Vi deo Input Select the Image Adjust Menu with the Point Up / Down button, and then press the Point Right button to enter the sub-menu. 1 2 Select an item with the Point Up / Down button and press the Point Left / Right button to adjust the item. Image Adjust Menu Press the Point Left button to decrease contrast and the Point Right button to inc[...]

31 Vi deo Input To store the adjusted data, select Store and press the Point Right button. A confirmation box will appear and then select [Yes]. Stored data can be called up by selecting "Image" in the Image Level Selection on page 29. A confirmation box will appear and select [Yes]. To reset the adjusted data, select Reset and press the [...]

32 Vi deo Input Scr een Siz e Adjustment This LCD Projection Monitor has a useful function to resize a projected screen. Select the Screen Menu with the Point Up / Down button then press the Point Right button to enter the sub-menu. Select an item with the Point Up / Down button and press the SELECT button to set the screen size. 1 2 Screen Menu Pr[...]

33 Input Source Selection (INPUT 1 / PC digital, A V HDCP) Direct Operation Select INPUT 1 by pressing the INPUT 1 button on the remote control or pressing the INPUT button on the front panel arbitrary number of times. Before using these buttons, correct input source should be selected through menu operation as described below. See p16-17 for the c[...]

34 Computer Input Input Source Selection (INPUT 2 / PC analog) Direct Operation Select INPUT 2 by pressing the INPUT 2 button on the remote control or pressing the INPUT button on the front panel arbitrary number of times. See p16 for the connection diagrams. Select the Input Menu with the Point Up / Down button, and then press the Point Right butt[...]

35 Computer Input This LCD Projection Monitor can detect most of the current computer systems with the Multi-scan system and the Auto PC adjustment function provided in the LCD Projection Monitor. When selecting computer input, the LCD Projection Monitor automatically displays the most proper image for the input signal. One of the following four di[...]

36 Computer Input The Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. This function can be operated as follows. Select the PC adjust Menu with the Point Up / Down button, and then press the Point Right button to enter the sub-menu. 1 2 Choose the Auto PC ad[...]

37 Computer Input Some computers employ special signal formats which may not be tuned by Multi-scan system of this LCD Projection Monitor. This LCD Projection Monitor has Manual PC Adjustment to enable you to precisely adjust several parameters to match those signal formats. The LCD Projection Monitor has 5 independent memory areas to memorize thos[...]

38 Computer Input Press the SELECT button to display the Display area dialog box. Select the resolution at the Display area dialog box. Display area Adjust the horizontal area displayed by this LCD Projection Monitor. Press the Point Left / Right button to decrease / increase value and then press the SELECT button. Display area H Adjust the vertica[...]

39 Computer Input Select an image level among Standard, Real, Dynamic, and Image by pressing the IMAGE button on the remote control. Normal picture level preset on this LCD Projection Monitor. Picture level with improved halftone for graphics. User preset image in the Image Level Adjustment. (p40) Standard Real Image Image Lev el Selection Direct O[...]

40 Computer Input Image Lev el Adjustment Select the Image Adjust Menu with the Point Up / Down button, and then press the Point Right button to enter the sub-menu. 1 2 Select an item with the Point Up / Down button and press the Point Left / Right button to adjust the item. Press the Point Left button to decrease contrast and the Point Right butto[...]

41 Computer Input This LCD Projection Monitor has a useful function to resize a projected screen. When Digital zoom is selected, the On-Screen Menu disappears and the message “D.zoom” is displayed. Press the SELECT button to expand the image. And press the Point e e d d 7 8 buttons to pan the image. The panning function can work only when the o[...]

42 Language The language used in the On-Screen Menu is available in English German, French, Italian, Spanish, Portuguese, Dutch and Swedish. Display This function decides whether to display On-Screen Displays. Press the Point Left / Right button to switch On / Off. On ···· show all the On-Screen Displays. Off ···· do not show On-Screen Disp[...]

43 Setting On start When this function is “On”, the LCD Projection Monitor is automatically turned on just by connecting the AC power cord to a wall outlet. Press the Point Left / Right button to switch On / Off. NOTE: ● When disconnecting the AC power cord without turning the LCD Projection Monitor off and with On start function "On&quo[...]

44 Setting This function is used to reset the Lamp replace counter. When replacing the projection lamp, reset the Lamp replace counter by using this function. See page 48 for operation. Lamp counter reset Factory default This function returns all setting values except for the lamp counter to the factory default settings. Select Factory default and [...]

45 The WARNING indicator shows the state of the function which protects the LCD Projection Monitor. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. LAMP REPLACE W ARNING WARNING blinking red Front Panel Wa r n i ng Indicator The LCD Projection Monitor is shut down and the WARNING indicator is blinking re[...]

46 Maintenance and Cleaning RECOMMENDATION We recommend avoiding dusty / smoky environments when operating the LCD Projection Monitor. When using under dusty or smoky conditions, dust may accumulate on the optical elements inside the LCD Projection Monitor and the screen surface. This condition may degrade the quality of a projected image. When the[...]

47 Maintenance and Cleaning When the life of the projection lamp of this LCD Projection Monitor draws to an end, the LAMP REPLACE indicator emits orange light. If this indicator emits orange light, replace the lamp with a new one promptly. LAMP REPLACE W ARNING N -OFF This indicator emits orange light when the life of the projection lamp draws to a[...]

48 Maintenance and Cleaning Be sure to reset the Lamp replace counter after the lamp is replaced. When the Lamp replace counter is reset, the LAMP REPLACE indicator stops emitting. Turn the LCD Projection Monitor on, press the MENU button, and the On-Screen Menu will appear. Select the Setting Menu with the Point Up / Down button and press the Poin[...]

49 Maintenance and Cleaning This LCD Projection Monitor uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. [...]

50 W ARNING : High voltag es are used t o operat e this LCD Projection Monit or . Do not at tempt t o open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the LCD Projection Monitor or the service center. Give the model number and explain about the problem. We will advise you[...]

51 Appendix Check the indicators for LCD Projection Monitor condition. Indicators and Condition of the LCD Pr ojection Monitor The LCD Projection Monitor is OFF. (The AC power cord is unplugged.) The temperature inside the LCD Projection Monitor is abnormally high. The LCD Projection Monitor cannot be turned on. When the LCD Projection Monitor has [...]

52 Appendix Menu T ree Auto PAL SECAM NTSC4.43 NTSC V ideo Input Auto 1080i 720p 575p 480p 575i 480i -31 ~ +31 -31 ~ +31 -31 ~ +31 -31 ~ +31 System (2) System (1) Image Adjust Contrast Brightness Color Tint Red Green Blue Sharpness Reset Store Gamma -31 ~ +31 -31 ~ +31 -31 ~ +31 -7 ~ +7 -7 ~ +7 Yes / No Yes / No Low 3 Color temp. Low 2 Low 1 INPUT [...]

53 Appendix System (3) Mode 1 Mode 2 SVGA 1 SVGA 3 Auto PC Adj. Fine sync. Total dots Horizontal Vertical Clamp Display area Display area - H Display area - V Reset Standard Real Dynamic Contrast Brightness Color temp. Red Green Blue Gamma Store Normal Full True Digital zoom 0 ~ 31 -31 ~ +31 -31 ~ +31 Computer Input PC Adjust 640 x 480 720 x 400 80[...]

54 Appendix Set ting On / Off On / Off On / Off Normal Yes / No Blue back Display No operation shut off timer Lamp control Factory default Auto Eco1 Yes / No Lamp counter reset Background color Menu Position Eco2 A udio Audio Treble Bass Balance Store Yes / No Reset Yes / No -30 ~ +30 -30 ~ +30 L30 ~ R30 Power Management Code 1 - 8 Remote control O[...]

55 Appendix Compatible Computer Specifications Basically this LCD Projection Monitor can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.09 VGA 4 64[...]

Appendix 56 0.7” wide TFT Active Matrix type, 3 panels LCD Projection Monitor 40.0 kg 1,352mm (W) x 940mm (H) x 408mm (D) 1280 x 720 dots 2,764,800 (1280 x 720 x 3 panels) PAL, SECAM, NTSC, and NTSC4.43 H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz 55" 41˚F ~ 95˚F (5 ˚C ~ 35 ˚C) 14˚F ~ 140˚F (-10 ˚C ~ 60 ˚C) Owner’s Manual AC Power Cor[...]

57 Appendix The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer. ● VGA Cable Type No. : POA-CA-VGA ● LCD Projection Monitor Stand Type No. : POA-TD-55WM1 ● PJ Net Organizer Type No. : POA-PN30 ● Camera Sand for Video Conference System Type No. : POA-TD-VCSTAND Optional P [...]

58 Appendix Configurations of T er minal PC IN (D-SUB) TERMINAL / OUTPUT TERMINAL Terminal : Mini D-sub 15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input / Output Ground (Horiz.sync.) Green Input / Output - Blue Input / Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 No Connect Horiz. sync. Ground (Vert.sync.) - - Vert. sync. - [...]

59[...]

Printed in China Part No. 610 319 6848 (1AA6P1P4769-- M8JA) SANYO Electric Co., Ltd.[...]