Samsung SCC-C6403 manual

Part : AB68-00570A(00) Smar tDome Camera SCC-C6403 E F Es J Owner’ s Instr uctions Manuel d’instruction Manual del usuario 00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 1[...]

E Safety Precautions Impor tant Safety Instructions The purpose of this information is to ensure proper use of this product to prevent danger or damage to property. Please be sure to observe all precautions. * The precautions are divided into "Warnings" and "Cautions" as distinguished below: Warning: Ignoring this warning may re[...]

6. Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Doing so may cause personal injury due to fire, electrical shock, or falling objects.) 7. Do not install the unit in humid, dusty, or sooty locations. (Doing so may cause fire or electrical shock.) 8. If any unusua[...]

1-2 E 1-1 Bef ore Usage This is a basic instruction manual f or the SCC-C6403 user . It contains all the instructions needed to use the SCC-C6403 from a simple introduction of the control locations and functions of the SCC-C6403 to installation methods in the set up menu. W e recommend all users of the SCC-C6403 from the adv anced user who has used[...]

1-3 1-4 E In this chapter we will briefly introduce the SCC-C6403 and show main functions , locations of control and Switch Setting. Chapter 1 SCC-C6403 Overview 4. ZONE SET...............................................................................................3-19 - ZONE DIR SET...............................................................[...]

1-6 E 1-5 Locations of Control FRONT SCC-C6403 Introduction SCC-C6403 is a zoom lens b uilt in smar t dome camera which provides y ou with the best monitor ing function in connection with CCTV at banks or companies. The SCC-C6403 is a high quality sur veillance camer a using x32 zoom lens and digital z oom IC , it can catch clear images up to 320 t[...]

1-8 E 1-7 AD APTER CONNECTION SCC-C6403 Adapter BOARD AC 24V OUT POWER AC 24V OUT POWER BA CK 00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 1-7[...]

1-10 E 1-9 Setting RS-422A/RS-485 termination 12 As it is shown in the structure map, when Controller and RS-422A/RS- 485 is connected it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest. <R[...]

2-2 E 2-1 Bef ore Installing Checking P acka ge Contents Please check that all components listed below are included in the package: SCC-C6403 Bracket anchor AC 24V OUT POWER Camera Holder Adapter Board Cover Body (Option) Owner ’ s Instructions Screws Chapter 2 SCC-C6403 Installation In this chapter , we will chec k the contents of the package be[...]

2-3 2-4 E 1. First, connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT) 2. Then, connect the other end of the connector to the Video Input Terminal of the monitor. Cable Connection 4. Adjust the switch on the Power Adapter to the proper voltage. Then, connect the Power Adapter's plug to the Power Connector[...]

2-6 E 2-5 3) INDOOR HOUSING (SHG-120) This housing is used for installing the SmartDome Camera to an indoor wall or a ceiling. 4) OUTDOOR HOUSING (SHG-220) This housing is used for installing the SmartDome Camera to an outdoor wall or a ceiling. Installing SCC-C6403 Installation Precautions 1) Make sure that the installation site can sufficiently s[...]

2-8 E 2-7 1. [Figure 1] Install the structure on the ceiling. (Refer to Installation reference for the Length of the structure) * Built in by the builder of the structure 3. [Figure 2] Assemble the BRKT-ANCHOR on the ceiling and screw the 4 bolts in. [Figure 2] 2. Make a hole in the ceiling where the camera will be installed. (The hole should be ab[...]

3-1 E 2-9 Chapter 3 Setup Menu Overview In this chapter , we will look ov er the Setup Menu of the SCC-C6403, First we'll look o v er the ov erall structure of the Setup Menu, and then we'll look at the functions of each men u. 7. [Figure 7] Match the 3 holes on the back of the CAMERA and the CONNECTOR and turn it left about 15 degrees. ([...]

3-3 E 3-2 The diagram shown above illustrates the overall structure of the Setup Menu. In this section, a description of the Setup menu features will enable users of the SCC-C6403 to tailor it to their personal needs. ALARM SET ALARM PRIORITY SET ALARM1~4 1~4 EXIT QUIT/SAVE ALARM IN SET ALARM1~4 NO/NC/OFF EXIT QUIT/SAVE ALARM OUT SET ALARM1~4 1~3 M[...]

3-5 E 3-4 Use the controller to press the MENU selection key and the following screen will be displayed. In case of ➀ , use UP/DOWN/LEFT/RIGHT/[ENTER] key for MENU setup. In case of ➁ , type in the 4 digit password first. If correct, the MENU selection screen like ➀ will be displayed and you will be able to set up MENU by pressing UP/DOWN/LEF[...]

3-7 E ➜ Press [Enter] MO TION DET In MOTION DET, you can set the Motion Detection function, Motion Detection Sensitivity, and the Area of Motion Detection. If the Motion Detection function is set, the movement of an intruder can be detected. When motion is detected, it sets off the Alarm signal of the Controller. (CAMERA SET) CAMERA ID OFF V-SYNC[...]

DISPLA Y ZOOM In DISPLAY ZOOM, you can display the ZOOM scale on the screen. ❈ If no change on the ZOOM scale is made for 3 seconds, the information window will disappear. 3-9 E 3-8 ZOOM SPEED In the ZOOM SPEED menu you can select the speed of the ZOOM Key (Tele/Wide). Use the [Left] or [Right] keys in the ZOOM SPEED menu to select the speed. 1 :[...]

3-11 E 3-10 For items in the BLC menu, the user can set the size and location of the BLC area by pressing [ENTER] key after put the cursor on USER … using the [Left, Right] key. For SIZE items, you can use the [Up, Down, Left, Right] key to designate the SIZE, and then press the [ENTER] key. You can set the location for areas using the [Up, Down,[...]

3-13 E (VIDEO SET) IRIS ALC... SHUTTER AUTO X2... MOTION F.FAST WHITE BAL ATW1 DIS --- FOCUS MODE ONEAF SPECIAL ... EXIT QUIT AG C The AGC menu was designed to provide you with brighter screen supposed you photographed any subject in the dark resulting in less brighter image than regulated. AGC menu setup is available only when the SHUTTER menu is [...]

3-15 E You can select one of four modes for white balance adjustment as follows: - ATW1/ATW2(Auto-Tracing White Balance Mode): In these modes, the color temperature is monitored continuously and thereby white balance is set automatically. The following are the approximate supported color temperature ranges in these modes. ATW1 : 2500K ~ 9300K( ✻ [...]

3-17 E 3. PRESET This is the menu that user sets the PAN/TILT location, Zoom/Focus, and screen condition, so the camera can monitor the presetting area on demand. A total of 128 presets are available. ➜ Press [Enter] ➜ Press [Enter] ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET ... ZONE SET... AUTO SET... ALARM SET... OTHER SET... SYSTEM IN[...]

3-19 E 4. ZONE SET The ZONE SET menu includes the setup of ZONE DIRECTION, and ZONE AREA. ➜ Press [Enter] (ZONE SET) ZONE DIR SET OFF ZONE AREA SET OFF EXIT QUIT ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... SYSTEM INFO... 3-18 POSITION SET From "POSITION SET..." press [ENTER] to [...]

3-21 E 3-20 ZONE AREA SET 0 LOCATION ... ZONE ID SET ... ZONE ENABLE ON EXIT QUIT ZONE ID SET This function is used to allocate as many as 12 IDs to each zone area. Use Left , Right, UP, or DOWN for this purpose. You may select the ID position from the additional menu of “ LOCATION... ” . ➜ Press [Enter] ZONE AREA ID 0 A B C D E F G H I J K L[...]

3-23 E 3-22 SPEED This is a setting function for movement speed setup. It can be set from STEP1 to STEP64. D WELL TIME This is a function for setting up the time to stay in the START to END position. P A TTERN This is a replay function so that the MANUAL functions such as PAN, TILT, ZOOM, and FOCUS, IRIS are played for 2 minutes. ❈ When the PATTE[...]

3-25 E 3-24 A UT O PLA Y AUTO PLAY executes SCAN, AUTO PAN, PATTERN, and PRESET when there is no camera action after AUTO RETURN finishes. A UT O RETURN This menu sets up the time during which AUTO PLAY repeats. A UT O PLA Y This function sets up the motion which will be repeatedly performed by SCC-C6403 whenever the time set by AUTO RETURN elapses[...]

3-27 E 3-26 7. O THER SET PROPOR TIONAL P/T This function controls the PAN/TILT speed to the ZOOM magnification ratio during the manual operation of PAN/TILT. If you set PROPORTIONAL P/T to ON, the PAN/TILT speed will increase in the ZOOM WIDE mode and decrease in the ZOON TELE mode even in the same manual operation. A UT O SET This menu designates[...]

3-29 E 3-28 ➜ Press [Enter] ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... SYSTEM INFO... ( SYSTEM INFO) ALARM VER. V1.000 MOTOR VER. V1.000 CAMERA VER. V1.000 EEPROM VER. V1.000 PROTOCOL SAMSUNG COMM. TYPE RS-485,HALF BAUD RATE 9600 ADDRESS 0 SERIAL NO. 000000000000000 RET 8. SYSTEM INFO Th[...]

3-31 E 3-30 9. SHOR T KEYS SSC-1000 or SSC-2000 Controller supports the following short keys. Other keys than AUTO CAL. and AUTO RETURN, upon execution, shall be applied to the MENU setup process. 1) The use of AUTO RETURN will be available only when the function equivalent to AUTO PLAY, a sub menu of AUTO SET has been built in. Function Key CAMERA[...]

3-32 Contents - Zoom lens single body SmartDome CAMERA - AC 24 ± 10% (50Hz ± 0.3Hz) - 18W - NTSC STANDARD COLOR SYSTEM - 1/4 inch 410K IT Type S-HAD CCD - 768(H) X 494(V) - 525 Lines, 2:1 Interlace - Horizontal : 15,734 Hz(INT) / 15,750 Hz(L/L) - Vertical : 59.94 Hz(INT) / 60 Hz(L/L) - INT/LINE LOCK - 480 TV LINES - 50dB (AGC OFF) - COLOR : 0.3 L[...]