PSB Speakers PSB-1688LF M1 manual

USER’S MANUAL PSB-1688LF For Socket 370 Full-size CPU Card With VGA / Sound / LAN PSB-1688LF M1[...]

Copyright Notice PSB-1688LF Socket 370 Full-size Embedded Card With VGA / Dual LAN OPERATION MANUAL COPYRIGHT NOTICE This operation m anual is meant to assist both Em bedded Com puter manufacturers and end users in installing and setting up the syst em. The information cont ained in this docum ent is subject to change wit hout any notice. This manu[...]

Copyright Notice FCC NOTICE This equipment has been tested and found to compl y with the lim its for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecti on against harmful interference when the equipment is operated i n a comm ercial environm ent. This equipm ent generates, uses, [...]

Contents TABLE OF CONTENTS CHAPTER 1 INTRODUCTION 1-1 About This Manual ...................................................... 1-2 1-2 System Specification ..................................................... 1-3 1-3 Safety Precautions ....................................................... 1-6 CHAPTER 2 HARDWARE CONFIGURATION 2-1 Jumper & Con[...]

Contents 2-32 Memory Installation ………………………………….. 2-25 2-33 LCD Connector ……………………………………… 2-26 CHAPTER 3 SOFTWARE UTILITIES 3-1 Introduction …………................................................. 3-2 3-2 VGA Driver Utility ………………………………….. 3-2 3-3 Flash BIOS Upd[...]

Page:1-1 INTRODUCTION This chapter gives you the informa tion for PSB-1688LF. It also outlines the System specification. Section includes: z About This Manual z System Specifications z Safety precautions Experienced users can skip to chapter 2 on page 2-1 for Quick Start. CHAPTER 1[...]

Chapter 1 Introduction Page: 1-2 PSB-1688LF USER ′ S MANUAL 1-1. ABOUT THIS MANUAL Thank you for purchasing our PSB-1688LF Socket 370 Full -size CPU Card equipped with VGA / LAN, which is fu lly PC / AT compatible. PSB-1688LF provides faster processin g speed, greater expan dability and can han dle more task than before. This m anual is designed [...]

Chapter 1 Introduction PSB-1688LF USER ′ S MANUAL Page: 1-3 1-2. SYSTEM SPECIFICATION z CPU TYPE: Single Intel® Celeron™ / P-III / Tualatin, VIA C3 processors. 566MHz ~1.26 GHz clock generator. Auto detect voltage regulat or. z MEMORY : Up to 2GB SDRAM. Two 184-pin DDR (PC200/266) DIMM socket. z CACHE : Depended on CPU. z SYSTEM CHIPSET : VIA [...]

Chapter 1 Introduction Page: 1-4 PSB-1688LF USER ′ S MANUAL z DISPLAY : Built-in VIA CLE 266 Onboard 15-pin CRT connector, support resolutions up to 1600 x 1200. Fully support multi-display of CRT, and TTL interfaces. z WATCHDOG : I / O port 0443H to Enable wat chdog. I / O port 0441H to Disable wat chdog. Watchdog function is select able for Res[...]

Chapter 1 Introduction PSB-1688LF USER ′ S MANUAL Page: 1-5 z IRDA PORT : 5-pin Infrared port. Support IrDA v1.0 SIR protocol. z LED INDICATOR : System power. Hard Disk access. Power LED indicator. z DMA CONTROLLER : 82C37 x 2 z DMA CHANNELS : 7 z INTERRUPT CONTROLLERS : 82C59 x 2 z INTERRUPT LEVELS : 15 z OPERATING TEMPERATURE : 0 to 60 ° C. z [...]

Chapter 1 Introduction Page: 1-6 PSB-1688LF USER ′ S MANUAL 1-3. SAFETY PRECAUTIONS Follow the messages bel ow to avoid your system s from dam age: 1. Avoid your system from sta tic electricity on all occasions. 2. Prevent electric shock. Don‘t touch any component s of this card when the card is power-on. Always disconnect power when t he syste[...]

Page 2-1 HARDWARE CONFIGURATION ** QUICK START ** CHAPTER 2 Helpful informati on describes the jumper & connector set tings, and component locati ons. Section includes: z Jumper & Connector Quick R eference Table z Component Locati ons z Configuration and Jum per settings z Connector’s Pin Assignm ents[...]

Chapter 2 Hardware Config uration Page: 2-2 PSB-1688LF USER ′ S MANUAL 2-1. JUMPER & CONNECTOR QUICK REFERENCE TABLE COM Port Conn ector ....................…..................………. COM1, COM2 RS232/422/485 (COM2) Sel ection ..................... ……….. JP2 Keyboard or PS/2 Mouse Connector ..........….......……… DIN1 Keyboa[...]

Chapter 2 Hardware Config uration PSB-1688LF USER ′ S MANUAL Page: 2-3 2-2. COMPONENT LOCATIONS PSB-1688LF Connector, Jumper and Component locations[...]

Chapter 2 Hardware Config uration Page: 2-4 PSB-1688LF USER ′ S MANUAL 2-3. HOW TO SET THE JUMPERS You can configure your board by set ting ju mpers. Jum per is consist s of two or three met al pins with a plasti c base mounted on the card, and by using a small plastic " cap " , Also known as the jumper cap (with a metal contact inside)[...]

Chapter 2 Hardware Config uration PSB-1688LF USER ′ S MANUAL Page: 2-5 JUMPER DIAGRAMS 2 pin Jumpe r loo ks l ike t his Ju mper Ca p looks like this 3 pin Jumpe r loo ks l ike t his Ju mper Bl ock loo ks l ike t his JUMPER SETTINGS Looks like this 3 pin Jump er 2-3 pin close( ena bl ed) Looks like this Jumper Bl ock 1-2 pin close( ena bl ed) 2 pi[...]

Chapter 2 Hardware Config uration Page: 2-6 PSB-1688LF USER ′ S MANUAL 2-4. COM PORT CONNECTOR COM1 : COM1 Connector, fixed as RS-232. The pin assignment is as follows : PIN ASSIGNMENT 1 NDCDA 2 NSINA 3 NSOUTA 4 NDTRA 5 GND 6 NDSRA 7 NRTSA 8 NCTSA 9 JNRIA COM2 : COM2 Connector, selectabl e as RS-232/422/485. The pin assignment is as follows : PIN[...]

Chapter 2 Hardware Config uration PSB-1688LF USER ′ S MANUAL Page: 2-7 2-5. RS232/422/485 (COM2) SELECTION JP2 : RS-232/422/485 (COM 2) Selection The COM2 Function selections are as follows : COM 2 Function Jumper Settings (pin closed) Jumper Illustrations RS-232 Open JP2 19 20 1 2 RS-422 1-2, 5-6, 7-8 9-10, 11-12, 13-14, 15-16 17-18, 19-20 JP2 1[...]

Chapter 2 Hardware Config uration Page: 2-8 PSB-1688LF USER ′ S MANUAL 2-6. KEYBOARD OR PS/2 MOUSE CONNECTOR DIN1 : Keyboard or PS/2 Mouse Connector DIN connector can support keyboard, Y-cable, or PS/2 M ouse, user may select the right device to used on “Keyboard or PS/2 Mouse Select ion”. The pin assignments are as follows : PIN ASSIGNMENT K[...]

Chapter 2 Hardware Config uration PSB-1688LF USER ′ S MANUAL Page: 2-9 2-8. EXTERNAL KEYBOARD CONNECTOR EXKB1 : External Keyboard Connector The pin assignment is as follows : PIN ASSIGNMENT 1 KBCLK 2 KBDATA 3 N C 4 GND 5 5VSB 2-9. RESET CONNECTOR JP3 (18,20) : Reset Connector. The pin assignment is as follows : PIN ASSIGNMENT 18 HWRSTJ 20 GND 2-1[...]

Chapter 2 Hardware Config uration Page: 2-10 PSB-1688LF USER ′ S MANUAL 2-11. EXTERNAL SPEAKER CONNECTOR JP3 (2,4,6,8) : External Speaker Connector The pin assignment is as follows : PIN ASSIGNMENT 2 VCC 4 GND 6 NC 8 P_SPK 2-12. POWER LED CONNECTOR JP3 (1,3,5) : Power LED Connector The pin assignment is as follows : PIN ASSIGNMENT 1 PW_LED 3 PW_L[...]

Chapter 2 Hardware Config uration PSB-1688LF USER ′ S MANUAL Page: 2-11 2-14. IRDA CONNECTOR IR1 : IrDA (Infrared) Connector The pin assignments are as follows: PIN ASSIGNMENT 1 VCC 2 NC 3 IRRX 4 GND 5 IRTX 2-15. CLEAR CMOS DATA SELECTION JP5 : Clear CMOS Data Selection The selections are as follows : FUNCTION JUMPER SETTING (pin closed) JUMPER I[...]

Chapter 2 Hardware Config uration Page: 2-12 PSB-1688LF USER ′ S MANUAL 2-16. CPU FAN CONNECTOR CPUFAN1 : CPU Fan connector The pin assignment is as follows: PIN ASSIGNMENT 1 FAN1 2 +12V 3 GND 2-17. UNIVERSAL SERIAL BUS CONNECTOR JUSB1: Universal Serial Bus Connector This connector can connect up to two USB port . The pin assignments are as follo[...]

Chapter 2 Hardware Config uration PSB-1688LF USER ′ S MANUAL Page: 2-13 JUSB2: Universal Serial Bus Connector This connector can connect up to two USB port . The pin assignments are as follows: PIN ASSIGNMENT 1 VCC 2 USBP2 − 3 USBP2+ 4 GND 5 GND 6 VCC 7 USBP3 − 8 USBP3+ 9 GND 10 GND 2-18. WAKE-ON-LAN CONNECTOR WOL1: Wake-On-LAN Connector. The[...]

Chapter 2 Hardware Config uration Page: 2-14 PSB-1688LF USER ′ S MANUAL 2-19. RESET/NMI/CLEAR WATCHDOG SELECTION JP11 : Reset/NMI/ Clear Watchdog Selection The selections are as follows: FUNCTION JUMPER SETTING (pin closed) JUMPER ILLUSTRATION RESET 1-2 JP1 1 6 5 1 2 NMI 3-4 JP1 1 6 5 1 2 CLEAR WATCHDOG 5-6 JP11 6 5 1 2 ***Manufacturing Default i[...]

Chapter 2 Hardware Config uration PSB-1688LF USER ′ S MANUAL Page: 2-15 2-20. VGA CONNECTOR VGA1 : VGA Connector The pin assignments are as follows: PIN ASSIGNMENT 1 RED 2 GREEN 3 BLUE 4 NC 5 GND 6 GND 7 GND 8 GND 9 VCC 10 GND 11 NC 12 5VDDCDA 13 HSYNC 14 VSYNC 15 5VDDCCL 1 5 6 10 11 15 V GA1[...]

Chapter 2 Hardware Config uration Page: 2-16 PSB-1688LF USER ′ S MANUAL 2-21. HARD DISK DRIVE CONNECTOR IDE1: Hard Disk Drive Connector The PSB-1688LF possesses two HDD connectors, which support ATA-100. The pin assignments are as follows: PIN ASSIGNMENT PIN ASSIGNMENT 1 IDERST 2 GND 3 PDD7 4 PDD8 5 PDD6 6 PDD9 7 PDD5 8 PDD10 9 PDD4 10 PDD11 11 P[...]

Chapter 2 Hardware Config uration PSB-1688LF USER ′ S MANUAL Page: 2-17 IDE2: Hard Disk Drive Connector The pin assignments are as follows: PIN ASSIGNMENT PIN ASSIGNMENT 1 IDERST 2 GND 3 SDD7 4 SDD8 5 SDD6 6 SDD9 7 SDD5 8 SDD10 9 SDD4 10 SDD11 11 SDD3 12 SDD12 13 SDD2 14 SDD13 15 SDD1 16 SDD14 17 SDD0 18 SDD15 19 GND 21 SDREQ 22 GND 23 SDIOW# 24 [...]

Chapter 2 Hardware Config uration Page: 2-18 PSB-1688LF USER ′ S MANUAL 2-22. FLOPPY DISK DRIVE CONNECTOR FDD1 : Floppy Disk Drive Connector You can use a 34-pin daisy-chain cable t o connect two-FDDs. On one end of this cable is a 34-pin flat cab le to a ttach the FDD on the board, and t he other side is attaches two FDDs. The pin assignments ar[...]

Chapter 2 Hardware Config uration PSB-1688LF USER ′ S MANUAL Page: 2-19 2-23. PRINTER CONNECTOR LPT1 : Printer Connector As to link the Printer t o the card, you need a cable to connect both DB25 connector and parallel port. The pin assignments are as follows : PIN ASSIGNMENT PIN ASSIGNMENT 1 STB 14 AFD1J 2 PD0 15 ERR1J 3 PD1 16 PINIT1J 4 PD2 17 [...]

Chapter 2 Hardware Config uration Page: 2-20 PSB-1688LF USER ′ S MANUAL 2-24. LAN CONNECTOR LAN1: LAN Connector The pin assignments are as follows: PIN ASSIGNMENT 1 TX+ 2 TX- 3 RX+ 4 ISOLATED GND 5 ISOLATED GND 6 RX- 7 ISOLATED GND 8 ISOLATED GND 2-25. COMPACT FLASH POWER SELECTION JCF1: Compact Flash Power Selection. The selections are as follow[...]

Chapter 2 Hardware Config uration PSB-1688LF USER ′ S MANUAL Page: 2-21 2-26. COMPACT FLASH MASTER/SLAVE SELECTION JCF2: Compact Flash Master/Slave Selection. The selections are as follows: POWER SELECTION JUMPER SETTING (pin closed) JUMPER ILLUSTRATION Master close JC F2 1 Slave open JC F2 1 2-27. ATX POWER SIGNAL CONNECTOR JP13 : ATX Power Sign[...]

Chapter 2 Hardware Config uration Page: 2-22 PSB-1688LF USER ′ S MANUAL 2-28. POWER CONNECTOR ATXPWR1 : Power Connector The pin assignments are as follows: PIN ASSIGNMENT 1 3V3 2 3V3 3 GND 4 VCC 5 GND 6 VCC 7 GND 8 PW-OK 9 5VSB 10 12V 11 3V3 12 -12V 13 GND 14 PS-ON 15 GND 16 GND 17 GND 18 -5V 19 VCC 20 VCC A TXPWR 1 20 10 11 1[...]

Chapter 2 Hardware Config uration PSB-1688LF USER ′ S MANUAL Page: 2-23 2-29. ATX / AT POWER SELECTION JP6 : AT / ATX Power Selection The selections are as follows: SELECTION JUMPER SETTING (pin closed) JUMPER ILLUSTRATION AT 1-2 JP6 6 2 5 1 ATX 4-6 JP6 6 5 1 2 *** Manufactory default --- ATX.  The default is set as ATX, if you wish to us e th[...]

Chapter 2 Hardware Config uration Page: 2-24 PSB-1688LF USER ′ S MANUAL 2-30. EPCI CONNECTOR PPCI: You will find a EPCI connector in our PSB-1688LF. This connector is used to connect our daughter boards. The pin assignments are as follows: PPCI A1 B1 A30 B30 PIN ASSIGNMENT PIN ASSIGNMENT A1 GND B1 GND A2 AD0 B2 AD1 A3 AD2 B3 AD3 A4 AD4 B4 AD5 A5 [...]

Chapter 2 Hardware Config uration PSB-1688LF USER ′ S MANUAL Page: 2-25 2-31. EPPCI IRQ SELECTION JP14: EPPCI IRQ Selection The selections are as follows: SELECTION JUMPER SETTING (pin closed) JUMPER ILLUSTRATION PCI_IRQB 1-2 1 JP1 4 PCI_SERIRQ 2-3 1 JP14 2-32. MEMORY INSTALLATION PSB-1688LF CPU Card is enhanced wit h two DIMM socket. DIMM 1 DIMM[...]

Chapter 2 Hardware Config uration Page: 2-26 PSB-1688LF USER ′ S MANUAL 2-33. LCD PANEL CONNECTOR LCD1 : LCD Panel Connector The pin assignments are as follows : PIN ASSIGNMENT PIN ASSIGNMENT 1 FPD20 2 GND 3 FPD16 4 FP_VCC5 5 FPD21 6 FPD0 7 FPD17 8 FPD8 9 FPD22 10 FPD1 11 FPD18 12 FPD9 13 FPD23 14 FPD2 15 FPD19 16 FPD10 17 FP_VCC5 18 FPD3 19 GFPV[...]

Page: 3-1 SOFTWARE UTILITIES This chapter comprises the deta iled inform ation of VGA driver, LAN driver, sound driver, and Flash BIOS update. It also descri bes how to install the watc hdog timer confi guration. Section includes: z VIA 4 IN 1 Service Pack Driver z VGA Driver Utility z Flash BIOS Update z LAN Driver Utility z USB 2.0 Chipset Softwa[...]

Chapter 3 Software Configuration Page:3-2 PSB-1688LF USER ′ S MANUAL 3-1. INTRODUCTION Enclosed with our PSB-1688LF packag e is our driver utility, which may comes in a form of a CD ROM disc or floppy diskettes. For CD ROM disc user, you will only need so me of the files contained in the CD ROM disc, please kindly refer to the following chart: Fi[...]

Chapter 3 Software Configuration PSB-1688LF USER ′ S MANUAL Page:3-3 1. Win 95 program 2. Win NT pro gram 3. Win 2000 program 4. Win 98/SE program 5. Win ME program 3-3. VGA DRIVER UTILITY The VGA interface embedded with our PSB-1688LF can support a wide range of display mode, such as SVGA, STN, TFT .....etc. You can display CRT, LVDS and PanelLi[...]

Chapter 3 Software Configuration Page:3-4 PSB-1688LF USER ′ S MANUAL 3-4. FLASH BIOS UPDATE 3-4-1. System BIOS Update: Users of PSB-1688LF can use the program “Awdflash.exe” cont ained in the Utility Disk for system BIOS and VGA BIOS update. 3-4-2. To update VGA BIOS for LCD Flat Panel Display: As PSB-1688LF user, you have to update the VGA B[...]

Chapter 3 Software Configuration PSB-1688LF USER ′ S MANUAL Page:3-5 FLASH MEMORY WRITER v7.XX (C) Award Software 2000 All Ri ghts Reserved Flash Type - MXIC 29F004T /5V File Name to Program: B88bxxxx.bin Checksum: XXXXX Error Message : Are You Sure To Program (Y/N) Select " Y " , and the BIOS will be renewed. Wh en you are refreshing t[...]

Chapter 3 Software Configuration Page:3-6 PSB-1688LF USER ′ S MANUAL 3-5. LAN DRIVER UTILITY 3-5-1. Introduction PSB-1688LF Embedded Board is enhanced wi th LAN function that can support various network adapters. Installa tion programs for LAN drivers are listed as follows: 1. Win 98SE p rogram 2. Win ME program 3. Win NT4.0 program 4. Win 20 00 [...]

Chapter 3 Software Configuration PSB-1688LF USER ′ S MANUAL Page:3-7 2. Install LAN Driver to Windows NT4.0 (1) In the Main group of NT, select the “Cont rol Panel” icon. (2) In the Control Panel window, choose t he “Network” icon. (3) In the Network Settings dial og box, choose the “Add adapter” button. The Add Network Adapter dialog[...]

Chapter 3 Software Configuration Page:3-8 PSB-1688LF USER ′ S MANUAL 3-6. USB2.0 SOFTWARE INSTALLATION UTILITY 3-6-1. Installation of Utility for Windows 98SE/ 2000/XP Intel USB 2.0 Enhanced Host Controller dri ver can only be used on Windows 98SE, Windows 2000 and Windows XP on Intel Desktop boards. It should be installe d right after the OS ins[...]

Chapter 3 Software Configuration PSB-1688LF USER ′ S MANUAL Page:3-9 3-7. WATCHDOG TIMER CONFIGURATION This board has watchdog tim er function for monitoring whether the system is still work or not after a period of time. The user can select watchdog timer t o system reset or NM I (Non Maskable interrupt ) depending on the jumper set in “R eset[...]

Chapter 3 Software Configuration Page:3-10 PSB-1688LF USER ′ S MANUAL[...]

Page: 4-1 AWARD BIOS SETUP This chapter shows how to set up the Award BIOS. Section includes: z Introduction z Entering Setup z The Standard CMOS Features z The Advanced BIOS Features z The Advanced Chipset Features z Integrated Peripherals z Power Management Setup z PNP/PCI Configurati on z PC Health Status z Frequency/Voltage Cont rol z Load Fail[...]

Chapter 4 Award BIOS Setup Page: 4-2 PSB-1688LF USER ′ S MANUAL 4-1. INTRODUCTION This chapter will show you the function of th e BIOS in managing the features of your system . The PSB-1688LF Dual Socket 370 Full-sized C PU Card is equipped with t he BIOS for sy stem chipset from Award Software Inc. This page briefly expl ains the function of the[...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-3 4-2. ENTERING SETUP When the system is powered on , the BIOS will enter the Power-On Self Test (POST) routines and the following message will appear on the lower screen: PRESS <DEL> TO ENTER SETUP, ESC TO SKIP MEMORY TEST As long as this message i s present on the screen you ma[...]

Chapter 4 Award BIOS Setup Page: 4-4 PSB-1688LF USER ′ S MANUAL 4-3. THE STANDARD CMOS FEATURES Highlight t he 〝 STANDARD CMOS FEATURES 〞 and press the <ENTER> key and the screen will d isplay the following table: Phoenix – Award CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) Thu, Mar 6 2003 9 : 48 : 26 Item[...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-5 IDE Primary Master / Slav e: IDE Secondary Master / Slav e: The BIOS can automatically detect th e specificati ons and optimal operating mode of al most al l IDE hard drives. When you select type AUTO for a hard drive, the BIOS detect its specifica tions during POST, every time syst [...]

Chapter 4 Award BIOS Setup Page: 4-6 PSB-1688LF USER ′ S MANUAL  LBA (Logical Block Addressing): During drive accesses, the IDE controller transforms the dat a address described by sector, head and cylinder number into a physical block address, significantly i mproving data transfer rates. For drives greater than 1024 cylinders. DRIVE A AND DR[...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-7 HARD DISK ATTRIBUTES: Type Cylinders Heads V-P com p LZone Sect Capacity 1 306 4 128 305 17 10 2 615 4 300 615 17 20 3 615 6 300 615 17 30 4 940 8 512 940 17 62 5 940 6 512 940 17 46 6 615 4 65535 615 17 20 7 642 8 256 511 17 30 8 733 5 65535 733 17 30 9 900 15 65535 901 17 112 10 82[...]

Chapter 4 Award BIOS Setup Page: 4-8 PSB-1688LF USER ′ S MANUAL 4-4. THE ADVANCED BIOS FEATURES Choose the 〝 ADVANCED BIOS FEATURES 〞 in the main menu, the screen shown as below. Phoenix – Award CMOS Setup Utility Advanced BIOS Features Virus Warning CPU Internal Cache [Disabled] [Enabled] Item Help External Cache CPU L2 Cache ECC Checking [...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-9 VIRUS WARNING : This item allows you to choose the Virus Warning feature for IDE Hard Disk boot sector protecti on. If this function is enabl ed and someone attempt to write data into this area, BIOS will sho w a warning message on screen and alarm beep. CPU INTERNAL CACHE: EXTERNAL [...]

Chapter 4 Award BIOS Setup Page: 4-10 PSB-1688LF USER ′ S MANUAL BOOT UP NUMLOCK STATUS: Select power on state for Num Lock. GATE 20A OPTION: This entry allows you to select how the gate A20 is handled. W hen Normal was set, a pin in the keyboard cont roller controls Gat e A20. And when Fast was set, the chipset controls Gate A20. TYPEMATIC RATE [...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-11 OS SELECT FOR DRAM > 64MB: Select the operating sy stem that is running with greater t han 64MB of RAM on the system. VIDEO BIOS SHADOW: Determines whether video BIOS will be coped to RAM. However, it is optional dep ending on chip set design. Video Shad ow will increase the vide[...]

Chapter 4 Award BIOS Setup Page: 4-12 PSB-1688LF USER ′ S MANUAL 4-5. ADVANCED CHIPSET FEATURES Choose the 〝 ADVANCED CHIPSET FEATURES 〞 fr om th e ma in menu , the screen shown as below. Phoenix – Award CMOS Setup Utility Advanced Chipset Features Item Help ▶ DRAM Clock/Drive Control ▶ AGP & P2P Bridge Control ▶ CPU & PCI Bus[...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-13 DRAM CLOCK/DRIVE CONTROL: The options for these item s are found in its sub menu. By pressing the <ENTER> key, you are prom pt to enter the sub m enu of the detailed opt ions as shown below: Phoenix – Award WorkstationCMOS Setup Utility DRAM clock / Drive Control Item Help C[...]

Chapter 4 Award BIOS Setup Page: 4-14 PSB-1688LF USER ′ S MANUAL 5. DRAM CAS Latency When synchronous DRAM is installed, t he number of clock cycl es of CAS latency depends on t he DRAM tim ing. 6. Bank Interleave 7. Precharge to Active (Trp) 8. Active to Precharge (Tras) This item controls the num ber of DRAM clocks for TRAS. 9. Active to CMD (T[...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-15 2. AGP Mode This item allows you to set the AGP mode. 3. AGP Driving Control This item allows you to adjust the AGP dri ving force. Choose Manual to key in an AGP Driv ing Value in the next selectio n. This field is recom mended to set i n Auto for avoiding any error in y our system[...]

Chapter 4 Award BIOS Setup Page: 4-16 PSB-1688LF USER ′ S MANUAL Descriptions on each item are as follows: 1. CPU to PCI Write Buffer When this field is En abled, writes from the CPU to the PCI bus are buffered, to compensate for the sp eed differences between the CPU and the PCI bus. When Disabled, the writ es are not buffered and the CPU must w[...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-17 4-6. INTEGRATED PERIPHERALS Choose 〝 INTEGRATED PERIPHERALS 〞 fro m th e mai n s etu p me nu , a display will be shown o n screen as below: Phoenix – Award CMOS Setup Utility Integrated Peripherals ▶ VIA OnChip IDE Device ▶ VIA OnChip PCI Device ▶ SuperIO Device [Press E[...]

Chapter 4 Award BIOS Setup Page: 4-18 PSB-1688LF USER ′ S MANUAL VIA ONCHIP IDE DEVICE: The options for these item s are found in its sub menu. By pressing the <ENTER> key, you are prom pt to enter the sub m enu of the detailed opt ions as shown below: Phoenix – Award CMOS Setup Utility VIA OnChip IDE Device Item Help OnChip IDE Channel0 [...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-19 4. Primary Master/Slave UDMA Secondary Master/Slave UDMA Ultra DMA/33 im plementation is possible onl y if your IDE hard drive supports it and the operating envi ronment incl udes a DMA driver (Windows 95 OSR2 or a third-party IDE bus m aster driver). If y ou hard drive and your sys[...]

Chapter 4 Award BIOS Setup Page: 4-20 PSB-1688LF USER ′ S MANUAL SUPER IO DEVICE: The options for these item s are found in its sub menu. By pressing the <ENTER> key, you are prom pt to enter the sub m enu of the detailed opt ions as shown below: Phoenix – Award CMOS Setup Utility SuperIO Device Item Help Onboard FDC Controller Onboard Se[...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-21 7. Use IR Pins This item allows you to select IR transmission routes, one is RxD2m, TxD2 (COM Port) and the other is IR-R x2Tx2 8. Onboard Parallel Port This item allows you to determine access onboard parallel port controller with which I/O address. 9. Parallel Port Mode Select an [...]

Chapter 4 Award BIOS Setup Page: 4-22 PSB-1688LF USER ′ S MANUAL 4-7. POWER MANAGEMENT SETUP Choose 〝 POWER MANAGEMENT SETUP 〞 option on the m ain menu, a display will be shown o n screen as below : Phoenix – Award CMOS Setup Utility Power Management Setup ACPI function Power Management Option [Enabled] [User Define] Item Help Suspend Mode [...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-23 VIDEO OFF OPTION: When enabled, this feature allows the VGA adapter to operate in a power saving mode. Always On Monitor will rem ain on during power saving modes. Suspend --> Off Monitor blanked when the systems enters the Suspend mode. Susp,Stby --> Off Monitor blanked when [...]

Chapter 4 Award BIOS Setup Page: 4-24 PSB-1688LF USER ′ S MANUAL IRQ/EVENT ACTIVITY DETECT: The options for these item s are found in its sub menu. By pressing the <ENTER> key, you are prom pt to enter the sub m enu of the detailed opt ions as shown below: Phoenix – Award CMOS Setup Utility IRQ/Event Activity Detect Item Help VGA LPT &[...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-25 7. RTC Alarm Resume When Enabled, your can set the date and time at which the RTC (real- time clock) alarm awakens th e system from Suspend m ode. 8. IRQ Activity Monitoring By entering this section, yo u will find a list of IRQ’s, which can be exempted m uch as the COM ports and [...]

Chapter 4 Award BIOS Setup Page: 4-26 PSB-1688LF USER ′ S MANUAL 4-8. PNP/PCI CONFIGURATION Choose 〝 PNP/PCI CONFIGURATION 〞 fro m the mai n men u, a d isp la y will be shown on screen as below: Phoenix – Award CMOS Setup Utility PnP/PCI Configurations PNP OS Installed Reset Configuration Data [No] [Disabled] Item Help Resources Controlled [...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-27 RESOURCE CONTROLLED BY: The Award Plug and Play B ios can automat ically configure all of the booth and Plug and Play-compatible devices. However, this capability means absolutely nothing unl ess you are using a Plug and Play operating system such as Windows 95. By choosing “manua[...]

Chapter 4 Award BIOS Setup Page: 4-28 PSB-1688LF USER ′ S MANUAL 4-9. PC HEALTH STATUS Choose 〝 PC HEALTH STATUS 〞 from the m ain menu, a display will be shown on screen as below: Phoenix – Award CMOS Setup Utility PC Health Status Item Help CPU Warning Temperature CPU Temperature CPU Fan Speed VCORE 3.3V +5V +12V -12V -5V VBAT (V) 5BSB (V)[...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-29 SHUTDOWN TEMPERATURE: This item allows you to set up the C PU shutdown Temperature. This function is only effect ive under Windows 98 ACPI mode. 4-10. FREQUENCY/VOLTAGE CONTROL Choose 〝 FREQUENCY/VOLTAGE CONTROL 〞 fro m the main men u, a display will be shown o n screen as below[...]

Chapter 4 Award BIOS Setup Page: 4-30 PSB-1688LF USER ′ S MANUAL CPU HOST / PCI CLOCK: Select Default or select a timing combination for the CPU and the PCI bus. When set to Default, the BIOS uses the actual CPU and PCI bus cl ock values. CPU RATIO: This item allows you to set up the C PU clock ratio, but this funct ion depends on different CPU p[...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-31 4-13. PASSWORD SETTING User is allowed to set eit her supervisor or user password, or both of them. The difference is that the supervisor password can ente r and change the options of the setup m enus while the user password can ente r only but do not have the authority to change th[...]

Chapter 4 Award BIOS Setup Page: 4-32 PSB-1688LF USER ′ S MANUAL 4-14. SAVE & EXIT SETUP After you have compl eted adjusting all t he settings as required, you m ust remember to save these setting into the CMOS RAM. To save the setting s, select “SAVE & EXIT SETUP” and press <Enter>, a display will be show n as follows: Phoenix [...]

Chapter 4 Award BIOS Setup PSB-1688LF USER ′ S MANUAL Page: 4-33 4-15. EXIT WITHOUT SAVING If you wish to cancel any changes you have m ade, you may select the “EXIT WITHOUT SAVING” and the orig inal setting stored in the CMOS will be retained. The screen will be sho wn as below: Phoenix – Award WorkstationCMOS Setup Utility ► Standard CM[...]

Page: A-1 EXPANSION BUS This appendix indicates the pi n assignments. Section includes: z ISA BUS Pin Assignment z PCI BUS Pin Assignment APPENDIX A[...]

Appendix A Expansion Bus Page: A-2 PSB-1688LF USER ′ S MANUAL ISA BUS PIN ASSIGNMENT There are two edge connector (called “ gold fingers “ ) on t his CPU Card, on the right hand is the connector of ISA Bus, fol lowed up by PCI BUS connector. The ISA-bus connector is divided int o two se ts: one consist s of 62 pins; the other consists of 36 p[...]

Appendix A Expansion Bus PSB-1688LF USER ′ S MANUAL Page: A-3 PCI BUS PIN ASSIGNMENT Like ISA-BUS connector, the PCI-BUS edge connector i s also divided into two sets: one consists of 98-pi n; the other c onsists of 22-pi n. The standard of PICMG 32-bit PCI-ISA connector contains 218 pins i n total. The pin assignments are as follows : E5 2 F52 F[...]

Appendix A Expansion Bus Page: A-4 PSB-1688LF USER ′ S MANUAL[...]

Page: B-1 TECHNICAL SUMMARY This section introduce you the m aps concisely. Section includes: z Block Diagram z Interrupt Map z RTC & CMOS RAM Map z Timer & DMA C hannels Map z I / O & Memory M ap APPENDIX B[...]

Appendix B Technical Summary Page: B-2 PSB-1688LF USER ′ S MANUAL BLOCK DIAGRAM VRM 8.5 HARRIS HIP6 004 CRT DISPLA Y VGA DSUB I D E ATA 1 0 0 / 1 3 3 USB 1~4 COMP ACT FLASH FDD UART 1,2 LPT1 H/W MONITOR CPU FAN T emper ature LPC SIO W8369 7HF ISA ROM LAN RT L8100BL KB/MS PCI/ISA IT8 88F/B F VT8235 S B outh ridg e CPU SOCKET 370 CLE 26 6 VT8623 No[...]

Appendix B Technical Summary PSB-1688LF USER ′ S MANUAL Page: B-3 INTERRUPT MAP IRQ ASSIGNMENT 0 System TIMER 1 Keyboard 2 Cascade 3 Serial port 2 4 Serial port 1 5 Available 6 Floppy 7 Parallel port 1 8 RTC clock 9 Available 10 Available 11 Available 12 PS/2 Mouse 13 Math coprocessor 14 IDE1 15 IDE2[...]

Appendix B Technical Summary Page: B-4 PSB-1688LF USER ′ S MANUAL RTC & CMOS RAM MAP CODE ASSIGNMENT 00 Seconds 01 Second alarm 02 Minutes 03 Minutes alarm 04 Hours 05 Hours alarm 06 Day of week 07 Day of mont h 08 Month 09 Year 0A Status register A 0B Status register B 0C Status register C 0D Status register D 0E Diagnostic status byte 0F Sh[...]

Appendix B Technical Summary PSB-1688LF USER ′ S MANUAL Page: B-5 TIMER & DMA CHANNELS MAP Timer Channel Map : Timer Channel Assignment 0 System timer interrupt 1 DRAM Refresh request 2 Speaker tone generator DMA Channel Map : DMA Channel Assignment 0 Available 1 Available 2 Floppy 3 Available 4 Cascade 5 Available 6 Available 7 Available[...]

Appendix B Technical Summary Page: B-6 PSB-1688LF USER ′ S MANUAL I/O & MEMORY MAP Memory Map : MEMORY MAP ASSIGNMENT 0000000-009FFFF System memory used by DOS and application 00A0000-00BFFFF Display buffer memory for VGA/ EGA / CGA / MONOCHROME adapter 00C0000-00DFFFF Reserved for I/O device BIOS ROM or RAM buffer. 00E0000-00EFFFF Reserved f[...]