Planar PQ1910M manual

USER’S GUIDE www.planar.com PQ1910M LCD Monitor[...]

2[...]

3 The information contained in this doc ument is subject to change without notice. This document contains propri etary information that is protected by copyright. All rights are reserved. No part of this document may be reproduced, translate d to another language o r stored in a retrieval system, or transmitt ed by any means, electronic, mechanic a[...]

4[...]

5 TABLE OF CONTENTS FOR YOUR SAFETY For Your Safety ---------- --------- -------- ---------- ---------- -------- ---------- -------- ---------- --6 GENERAL NOTES 1. Introduction -------- ---------- -------- ---------- -------- ---------- ---------- -------- ---------- ----8 1.1 General Information 1.2 Features 1.3 Check List 2. Installation -------[...]

6 FOR YOUR SAFETY Before operating the monitor, pleas e read this manual thoroughl y. This manual shoul d be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15[...]

7 PRECAUTIONS 1. Unplug the monitor from the power so urce whe n you clean the monitor. Do not use liquid cleaners o r aerosol cleaners. Use a cloth to clean it. If that doesn’t do, please use LCD screen clea ners. 2. Do not use attachment not recommende d as they may cause hazards. 3. Please grasp the plug to unplug the conn ector from the wall [...]

8 GENERAL NOTES 1.Introduction 1.1 General Information This monitor is a high-performance intelligent multi-sca nning color monitor utilizing active matrix TFT LCD display that uses amorphous silicon TFT as a switching device. With very low radiatio n, anti-glare surfa ce treatment and small footprint, it is very suitable for home and office applic[...]

9 2. Installation The following chapters expl ain how to install the base and co nnect the monitor to your personal computer. 2.1 Installing the Base Follow these steps to install the base: 1. Lay the monitor face down. 2. Assemble the base to the arm with screw. 3. Tighten the screw with a coin. 2.2 Installing the Monitor Before starting, make sur[...]

10 2.3 Self Test Pattern If there is no horizontal or vertical signal, your monitor will display the self test pattern to indicate no signal input. After a few seconds, the monitor will enter into waiting and saving power mode. The LED will b e red and flashing. Once the monitor receives the video signal, it will return to normal mode. 2.4 Adjustin[...]

11 3. Operation of the Monitor 3.1 Power On/Off S witch This is a light-touch digital-control key. It is used to turn the monitor on or off. 3.2 Power LED Indicator When the monitor is worki ng, the power LED is gree n. If the monitor is in saving power mode, the power LED will be red and flashing. If you turn off the computer, the power LED is off[...]

12 12. OSD position/transparency 13. Recall 14. Language s 15. Exit 16. Selected function name 17. Resolutio n 18. H-frequency 19. V-frequency 20. Progressive bar of adjustment 21. Percentage of adjustment 22. Planar LOGO 3.3.5 Meaning of the Menu in DVI Mode 1. Brightness 2. Contrast 3. Sharpness 4. Volume 5. OSD menu display time 6. Transpare ncy[...]

13 3.3.6 Function Table Display contents Function AUTO ADJUSTMENT Automatically adjust to obta in the best setting BRIGHTNESS Adjust the brightness CONTRAST Adjust the contrast H-POSITION Move the screen toward left or right V-POSITION Move the screen upward or do wnward CLOCK Adjust the frequency of pixel PHASE Adjust the phase of pixel clock SHAR[...]

14 3.3.7 Special Functions Auto Adjustment ( ) When you choose this function, the monitor will enter into automatically adjustment mode. After a few seconds, the monitor will be in the best visual display mode. Color Adjustment ( ): When the function is selected, the monitor will come into the sub-menu, there are five functions that can be selected[...]

15 3.4 Safety Mode When the video signal exceeds the frequen cy range of the monitor, t he monitor MCU will stop horizontal a nd vertical scanni ng in order to protect the monitor th e following image will be displayed on the screen. After a few seconds, the monitor will enter turn-off mode. You must rest art the computer and reset the frequency ra[...]

16 3.6 Plug & Play This monitor meets the standard of VESA DDC. When using video card with VESA DDC1/2B, it will auto-scan video fr equency, output power , function and other data to the PC whe n computer is on. It will go into the proper video mode and frequency. 3.7 Power Management This monitor complies with EPA energy star requirement and m[...]

17 4. Specifications Model PQ1910M Panel 19 ″ Resolution 1280 x 1024 Active area 376 mm x 301mm Pixel pitch 0.294mm x 0.294mm Contrast 700:1 Brightness 300 cd/m 2 Response time 8ms Display colors 16.2 M Viewing angle CR> 10 H:140°V:140° H-Frequency 51.2~82.1 kHz V-Frequency 48~77 Hz Plug & Play Yes Input signal Analog / Digital Video Inp[...]

18 5. Simple Troubleshooting Symptom Solution No picture / no LED Check if the power cord, the monitor and the po wer plug are well connected. Check al so if the monitor is off. No picture / Red LED flashing Check if the PC video card and signal cable are well connected and check if s ignal cable is prop erly connected with monitor. Picture is blur[...]

19[...]

20 Planar Systems, Inc. Customer Service Online Support ： http://www.planar.com/support Email ： PlanarSupport@planar. com Tel ： 1-866-PLANAR-1 (1-866-752-6271) Hours ： M-F, 8am-8pm Eastern Time (5am-5pm Pacific Time) © 2006 Planar Systems, Inc. Planar is a regi stered trademark of Planar Systems, Inc. Other brands and names are the propert[...]