Pelco NSM5200 manual

INSTALLATION C3683M (3/09) Network Storage Manager Endura ® NSM5200 Series[...]

[...]

C3683M (3/09) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Video Quality Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

4 C3683M (3/09) List of Illustrations 1 Major Package Compon ents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2 Accessory Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

C3683M (3/09) 5 Regulatory Notices This device co mplies with Pa rt 15 of the FCC Rules. Operat ion is subject to the following two conditions: (1) this device may n ot c ause harmf ul interference, and (2 ) this device must accept any inte rference received, including interference tha t may cause undesired operat ion. RADIO AND TELEVISION INTERFER[...]

6 C3683M (3/09) Description The NSM5200 Ser ies networ k storage mana ger (NSM) del ivers indu stry leading p erformanc e and innovati on for miss ion-critica l stor age needs. The combinat ion of high pe rformance, s calable ha rdware design and advanced software ca pabilities e nables the NS M5200 to mee t th e unique storage needs of physical se[...]

C3683M (3/09) 7 the rigors of video record ing applications than an NTFS file syst em, which is st andard with Windows ® -bas ed recorde rs. Altho ugh XFS is superior , fragmentat ion can build up over pr olonged p eriods of ac tive use . T o compe nsate, the s oftware inco rporates defragment ation rout i nes that ru n in the backgroun d. These r[...]

8 C3683M (3/09) MODELS OPTIONAL ACCESSORIES DAS5200 Series Each DAS5200 Serie s storage expansio n box adds additional st orage to each NSM520 0. Up to seven units can b e connected to an NSM5200 t hrough an external SAS co nnection f or a maximum of 72.7 TB of av ailable vid eo storage. When connected to an NSM5200, all DAS5 200 mo dels fully supp[...]

C3683M (3/0 9) 9 Before Y ou Begin Endura is a network system th at requires a continuous amoun t of bandwidth to transmit true , live video; therefore, always inclu de yo ur networ k administrator when planning and installing Endura compon ents. Y ou will need the following items: • Pelco-appr oved Endura certi fication • Access to an Endura n[...]

10 C3683M (3/09) USER -SUPPLIED PARTS In addition to the stan dard tools and cables requ ired for a video security insta llation, you w ill need to provide the following items: Qty Description 1 Cat5e (or better ) cable and connec tors for connecting the NSM5200 to th e Endura networ k 1 Power source (1 10/220 VAC) 1 Small flat-tip scr ewdriver , i[...]

Figure 3. Rack Mount Kit Figure 2. Accessory Pack C3683M (3/0 9) 11 A CC E SS ORY P A C K PHILLIP S PA N HEAD SC REW , 8-32 X 0. 375-IN C H 5 EA. (IN S T ALLED) S HOWN A C TUAL S IZE FRONT BEZEL KEY 2 EA. RA C K MOUNT KIT E S D DI S PO S ABLE WRI S T S TRAP 1 EA. RUBBER FEET 5 EA. (IN S T ALLED) S T ANDARD POWER C ORD 2 EA. RACK MOUNT KIT CABLE MAN[...]

12 C3683M (3/09) PRODUCT SERIAL NUMBER LABEL PLACEMENT Product ser ial number la bels help id entify your system and it s factory conf iguration i n the event that your NSM 5200 or its co mp onents req uire service. Three labels citing your product’ s serial number are attached to t he unit. O ne large label is a ttached to the r ight side panel [...]

C3683M (3/0 9) 13 Equipment Placement and Rack Mounting The NSM5200 can be placed on a flat sur face, such as a deskto p, or mounted in an equip ment rack. DESKTOP INSTALLATION T o install the NSM520 0 on a desktop: 1. Make sure the ru bber feet are installed to prevent surface d amage. If not, secure each rubb er foot to the bottom panel of the un[...]

14 C3683M (3/09) RACK MOUNTING The NSM520 0 mounts in to an indust ry-standar d 19-inch (48 cm) equi pment rack. Th e NSM5200 occ upies thr ee rack unit s (5.25 in. or 13.3 cm) of vertical ra ck space. The hardware ne cessary to mount the N SM5200 into a rack is s upplied with the unit. The rack mu st meet the following re quirements: • 19-inch ([...]

Figure 7. Assembling a Support Rail C3683M (3/0 9) 15 3. Attach one f ront-mount r ail to one re ar -mount rail. M ake sure the rails are moun ted back to b ack, as shown in Figure 7 . Depending on rack depth, use either three or four 8-32 x 0. 375-inch Philli ps truss head screws fo r each rail set. Leave the screws loose until st ep 10 . 4. Repea[...]

16 C3683M (3/09) 6. Attach one supp ort rail assembly to th e equipment rack in th e desired locati on (refer to Figure 9 ): NOTE: Th e support rail a ssemblies ar e identical and may be used on e ither the r ight or left side of the rack. a. Position the ear of the fron t-mount rail against the fr ont of the equipment rack. A lign the top and bot [...]

Figure 10. Attaching Rack Rail Spacers C3683M (3/0 9) 17 c. T ighten the two screws to secure the spacer to the rack. 9. Repeat step 8 for t he second spacer . 10. T ighten the 8-32 x 0.37 5-inch Philli ps truss head screws that were attached to the front- and rear -m ount rails in steps 3 an d 4. Figure 11. Mounting the NSM5200 into the Rack 11. P[...]

Figure 12. T ightening the Thumbscrews Figure 13. Installing the Cable Management Bracket 18 C3683M (3/09) 12. After the unit is in place, tighten the two thumbscrews to secure th e unit to the rack. 13. Install t he cable management bracke t on the rear panel as follo ws (refer to Figure 13 ): a. Position the bracket so that th e screw holes on th[...]

C3683M (3/0 9) 19 Hard Drive Array Installation The NSM5200 stores data using RA ID (Redundant Array of Independ ent Disks) technology . All NSM5200 Series re corders operate in a RAID 6 configuratio n to maximize fault toleran ce and enha nce disk-a ccess perfor mance. The NSM5200 has a single RAID controlle r that mana ges a single ar r ay of 12 [...]

Figure 15. Installing the Hard Drive Carrier 20 C3683M (3/09) 4. Install each hard dr ive carrier as follows: a. Open the hard drive latch (press down and p ull the spri ng latch). b. With the hard drive latch open, slid e the hard drive carrier gently into an op en hard drive bay (refer to Figure 15 ). c. Close the har d drive lat ch; make sure th[...]

C3683M (3/0 9) 21 Connections Figure 16. Rear Panel Layout Familiarize yourself with the NSM5200 rear panel before connecti ng any equipment to the unit. CONNECTING POWER The NSM5200 is equippe d with two hot-swappab le power supplies. Th ese autoranging power supplies adap t automatically to voltages from 100 to 240 V AC (50/60 Hz). Y ou should al[...]

22 C3683M (3/09) CONNECTING TO THE NETWORK The NSM5200 support s remote administration from an En dura workstation. The N SM5200 is compatible with the entire family of Endu ra-rea dy devices using TCP/IP and UPnP proto cols. Consult your network ad ministrator before in stalling th e NSM5200 t o avoid possible net work c onflicts. Use the left Gig[...]

C3683M (3/0 9) 23 Operation Refer to the W eb Browser manual that was shipped with the unit for details on how to access an d configure the NSM5200 . NOTE: T o make sure that all diagnos tic messages will appear to a syst em operator , leave at least one Endura workstation or VCD5000 ru nn ing at all times. During oper ation, monit or the unit st a[...]

24 C3683M (3/09) s Software Status • Green: The software is operating n ormally . • Amber: A minor software malfun ction is detected (for example, an excessi ve network packet loss). • Red: A fatal softwar e error has o ccurred: fo r example, c easing to r ecord. t Network Port 1 Speed and Activity Network status (connectio n and speed) is i [...]

C3683M (3/0 9) 25 UNIT STARTUP T o start the unit: 1. Unlock and o pen the front bezel. 2. Press the power button. The power indicator g lows white. Figure 20. Opening the Front Bezel 3. Close and lo ck the front beze l. The Pelco badge now glow s blue. UNIT SHUTDOWN Y ou can shut down the NSM5200 by performing one of the following op tions: • An[...]

26 C3683M (3/09) T roubleshooting If the followin g instruct ions fail to solve your problem, contac t Pelco’ s Pro duct Support at 1-800-28 9-9100 (USA a nd Canada) or +1-559-292 -1981 (international) for assistance. Access the prop erties dialog boxes for the NSM 5200 on the Endura wor kstation. Refer to th e Endura WS5000 S oftware Operation m[...]

C3683M (3/09) 27 Specifications SYSTEM Operating Syst em Linux RAID Level CompactFlash sy stem drive, RAID 6 for storage drives Effective Capa city Up to 9.082 TB, expandable with DAS5200s Drive Interface SAS/SA TA II User Interface Remote operat ion from Endura wor kstation or VCD5000 Minimum Require ments Microsoft ® Internet Explorer ® 6.x or [...]

28 C3683M (3/09) PHYSICAL Construction Steel cab inet Finish Front bezel Gray metallic with black end caps Chassis Black matte finish Dimensions 24.3" D x 17.0" W x 5.2" H (61.8 x 43.2 x 13.2 cm) Mounting Desktop (fe et) Rack, 3 RU per unit (Rack rails and hardware provid ed) ST A NDARDS/OR GANIZA TIONS • Pelco is a member of the M[...]

C3683M (3/0 9) 29 Appendices APPENDIX A: EXPAND ING V IDEO STORAGE Y o u can incre ase the video st orage capac ity of the N SM5200 by ad ding one or more DAS5200 dire ct attached storage (DA S). Each DA S520 0 adds up to 12.0 TB of total capa city (up to 9.08 TB of video st orage). Y ou can add up to seven DAS5200 units to expa nd the total cap ac[...]

30 C3683M (3/09) APPENDIX B: INSTALLING AN UNIN TERRUPTIBLE POWER SUPPLY (UPS) Y ou should connect each NSM 5200 to a UPS (not supplied). UPS devices maintain a limited amount of backup battery power if the m ain power fails. T o connec t communication a nd power from th e UPS to the NSM5200 (refer to Figure 22 ): 1. Connect a po wer cord from o ne[...]

PRODUCT W ARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without c harge, any merchandise proved defective in material or workmanship for a pe riod of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years: – Fiber optic products – TW3000 Series unshielded twisted pair (UTP) t[...]

Pelco, Inc. Worldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 292-1981 Fax +1 (559) 348-1120 www .p elco.c om[...]