Paxar 6094 manual

6094 TM Four Station Char g er TC6094OI Rev. BA 4/02 ©2002 Paxar Corporation. All rights reserved. Operating Instructions[...]

Each product and program carr ies a respective written warranty , the only warranty on which the customer can rely . Monar ch reser ves the right to make changes in the product and the programs and their av ailability at any time and without notice. Although Monarc h has made ev ery effor t to provide complete and accurate inf or mation in this man[...]

IMPORTANT SAFETY INSTRUCTIONS Save These Instructions This manual contains important safety and operating instructions for the 6094 charge r. Before using the 6094 charge r, please read all instructions and caution markings on: ✓ the charger. ✓ the battery handle. ✓ the printer. WARNING The 6094 charger is for charging PATHFINDER ® battery h[...]

3. Do not use an extension cord unless absolutely necessar y . If an extension cord is used, make sure ✓ the wire is 18 gauge or larger. ✓ the pins on the plug of the extension cord are the same number, size, and shape as those of the plug on the charger. ✓ the extension cord is properly wired and in good electrical condition. 4. Do not opera[...]

Table of Contents 1. Overview ................................................................................ 1 Charging Time ................................................................ 1 Convenience Features ................................................... 2 2. Installing the Charger .......................................................[...]

6094 Operating Instructions iv[...]

1. Overview The 6094 charger is a "fast charge" accessory for charging and storing PA THFINDER battery handles. There are four charging stations on the charge r. Each station charges independentl y , which means you can attach battery handles at anytime. Charging Time Charging time varies depending upon the capacity rating of the battery [...]

Convenience Features Additional features are: • switchable power supply which lets you select 100, 120, 220, or 240 VAC for your operating area. • charging status indicator light for each charging station. • replaceable fuses. Familiarize yourself with the different parts of the 6094 charge r. Fuse Box Power Light Status Indicator Power Switc[...]

2. Installing the Charger The charger may be mounted to the wall or set on a sturdy table. Before installing the charger ✓ set the power supply for the voltage in your area. ✓ select a location for wall mounting or table top use. ✓ perform the power on test. Setting the Power Supply When you first receive the charge r, the power supply is fac[...]

4. Carefully pull the fuse box straight out. Fuses are attached, so be careful not to drop or jolt the fuses. CAUTION Make sure you are using the correct fuses for the voltage you select. 5. Using a screwdrive r, pull the power selector straight out. 6. Rotate the power selector to the setting required. 7. Push the power selector all the way into t[...]

Wall Mount Installation To install the charger, you will need hardware appropriate for • the wall surface. • the weight of the charger with 4 handles (approximately 9.8 lb/4.4 kg). • screws no larger than No. 10 wood screw. 1. Select a location within 6 feet of an electrical outlet. Use the bracket of the charger to mark the holes where the u[...]

Power On Test Whenever you turn the power on, the charger will go through a self-test cycle which takes a few seconds. During this test, you’ll see the status indicators flash in the following sequence: 1. GREEN power light is on. 2. Each station, starting with station one, flashes GREEN to RED. 3. All four stations flash GREEN. 4. All four stati[...]

3. Charging Handles To begin charging... 1. Check the power light to make sure the power is on. 2. Slide the battery handle completely into the charging station. Power Light Charging Station Status Indicator Power Switch 7[...]

The status indicator will slowly flash green to indicate the battery handle is properly installed. During the charging cycle, the status indicator will change. Use the color of the status indicator and whether it is solid, flashing slowl y , or flashing quickly to determine the meaning of the indicato r. Status Indicator Solid Slow Flashing Quick F[...]

4. Troubleshooting This chapter includes common problems which may occur and instructions for replacing the fuses. Problems and Solutions This section helps you correct some problems that may occu r. If you cannot fix a problem, please contact Monarch Service. U.S. Customers call TOLL FREE 1-800-231-7700 International Customers contact your Pitney [...]

Problem Corrective Action Status indicator does not light up when a battery handle is attached. Check the power light to see if the power switch is ON. Push the battery handle completely into the charging station for a good connection. Check the fuses and replace if necessary. Try a known good battery handle to see if the problem is in the battery [...]

Replacing Fuses If the fuses need replacing, you’ll need: • 1A fuses for 120V and 100V. ...or... • .5A fuses for 220 and 240V. When the charger is facing you, the fuse box is located on the left side of the charger beside the power switch. 1. Turn the power OFF and unplug the power cord. 2. Use the tip of a screwdriver or pen to open the fuse[...]

Specifications Dimensions: Height 5.67 inches (14.4 cm) Width 9.21 inches (23.4 cm) Depth 3.94 inches (10 cm) Weight (with cord) 7 lb (3.2 kg) Power: Internal switchable power supply (100, 120, 220, 240 VAC/ 50 Hz. nominal) Replaceable dual fusing 1A fuses (Monarch part #PB02282108) for 100 and 120 VAC models .5 A fuses (Monarch part #PB02282107) f[...]

[...]

Published by the Technical Communications Department. Printed in U.S.A. F or supplies, ser vice or assistance call: TOLL FREE: 1-800- 543-6650 (In the U.S.A.) 1-800- 263-4650 (In Canada) www.paxa r.com[...]