Panasonic TH-50LFB70U manual

Model No. TH-50LFB70U TH-65LFB70U Operating Instructions T ouch Screen LCD Display (for business use) For more detailed instructions, refer to the Operating Instructions on the CD-ROM. Contents • Important Safety Instructions .....................2 • FCC ST A TEMENT .....................................3 • Important Safety Notice ............[...]

2 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions. 8) Do not install near any heat sour[...]

3 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed an[...]

4 Important Safety Notice W ARNING 1) T o prevent damage which may result in  re or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water ( ower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.) No naked  ame sources, such as lighted candles, should be placed on[...]

5 Safety Precautions Always be sure to ask a quali ed technician to carry out set-up. Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young ch[...]

6 Safety Precautions When using the LCD Display The Display is designed to operate on 1 10 - 127 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Display to overheat, which can cause  re or damage to the Display . Do not stick any foreign objects into the Display . • Do not insert any metal or  ammable objects [...]

7 Safety Precautions CAUTION When using the LCD Display Do not bring your hands, face or objects close to the ventilation holes of the Display . • Heated air comes out from the ventilation holes at the top of Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deform[...]

8 Safety Precautions T ouch panel Carefully observe the following instructions as the display has an optical touch panel. Do not expose the display to direct sunlight or strong light source during use. • Otherwise malfunction may occur since the optical touch panel of the display uses infrared rays. After turning on the power of the display , do [...]

9 Clamper × 1 TMME289 Batteries for the Remote Control T ransmitter (AA Size × 2) Remote Control T ransmitter N2QA YB000691 Operating Instruction book Check that you have the accessories and items shown Software CD-ROM × 1 Pen × 2 Eraser × 1 Pen Stand × 1 (see page 1 1) Screw × 2 (see page 1 1) USB cable × 1 Ferrite core × 2 J0KG00000014 C[...]

10 + - + - Remote Control Batteries Requires two AA batteries. 1. Pull and hold the hook, then open the battery cover . 2 . Insert batteries - note correct polarity (+ and -). 3. Replace the cover. Helpful Hint: For frequent remote control users, replace old batteries with Alkaline batteries for longer life. Precaution on battery use Incorrect inst[...]

Mounting position of the Pen Stand [For 50 inch model] The supplied Pen Stand can be mounted in one of the four dedicated screw hole positions on the back of the Display . [For 65 inch model] The supplied Pen Stand can be mounted in one of the nine positions on the back of the Display . Remove one screw  xing the back cover and mount the Pen Sta[...]

12 Connections Plug the AC cord into the display unit. Plug the AC cord until it clicks. Note: Make sure that the AC cord is locked on both the left and right sides. AC cord  xing Unplug the AC cord Unplug the AC cord pressing the two knobs. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket out[...]

13 V ideo equipment connection Connections Please use 8 /10 W speaker . Speaker connection Red Black Red Black 1 While pressing the lever , insert the core wire. 2 Return the lever . * DIGIT AL LINK is technology that enables signals such as audio and video to be transmitted using twisted pair cables. For details, see the Operating Instructions [...]

14 Power On / Off Press the button on the remote control to turn the Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Display on. Power Indicator: Green T urn the power to the Display off by pressing the switch on the unit, when the Display is on or in standby mode. Note: During operation of the power m[...]

Set Day MON 18:00 Tim e Day/Time Settings Time MON 99:99 Set Day TUE 18:00 Tim e Day/Time Settings Time TUE 99:99 OSD Language English (UK) Deutsch Français Italiano Español ENGLISH (US)  15 Power On / Off When  rst switching on the unit Following screen will be displayed when the unit is turned on for the  rst time. Us[...]

16 Basic Controls INPUT MENU VOL ENTER/ + / - / MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. Normal Viewing Picture Sound Pos. /Size Setup V olume Adjustment V olume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down [...]

17 Basic Controls Remote Control T ransmitter Digital Zoom 1 2 PC 4:3  COMPONENT Memory name: MEMORY2 Off timer 90min 3 4 10:00 Standby (ON / OFF) button The Display must  rst be plugged into the wall outlet and turned on at the power switch (see page 14). Press this button to turn the Display On, from Standby mode. Press it again to turn the[...]

18 Speci cations TH-50LFB70U Power Source 1 10 - 127 V AC, 50/60 Hz Power Consumption Power on 140 W Stand-by condition 0.5 W Power off condition 0.3 W LCD Display panel 50-inch V A panel (LED backlight), 16:9 aspect ratio Screen size 43.1” (W) × 24.2” (H) × 49.5” (diagonal) / 1,095 mm (W) × 616 mm (H) × 1,257 mm (diagonal) (No.of pixe[...]

19 TH-65LFB70U Power Source 1 10 - 127 V AC, 50/60 Hz Power Consumption Power on 215 W Stand-by condition 0.5 W Power off condition 0.3 W LCD Display panel 65-inch V A panel (LED backlight), 16:9 aspect ratio Screen size 56.2” (W) × 31.6” (H) × 64.5” (diagonal) / 1,428 mm (W) × 803 mm (H) × 1,638 mm (diagonal) (No.of pixels) 2,073,600 (1,[...]

20 Software information regarding this product © Panasonic Corporation 2013 This product incorporates the following software: (1) the software which is developed independently by or for Panasonic Corporation (2) the software which is licensed under the GNU GENERAL PUBLIC LICENSE (3) the software which is licensed under the GNU LESSER GENERAL PUBLI[...]

21 Panasonic Solutions Company Unit of Panasonic Corporation of North America Two Riverfront Plaza, Newark, New Jersey 07102-5490 Panasonic Professional Flat Panel Display Limited W arranty Models or Parts Part W arranty Labor W arranty Professional Flat Panel Display LIMITS AND EXCLUSIONS There are no express warranties except as listed above. THE[...]

22 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 LIMITED W ARRANTY ST A TEMENT Item Video Tape P2/SD Cards Video Heads D5 Video heads Maintenance Items Colour Camera CCD Imaging Block All LCD Monitors * DLP™ Projectors * LCD Projectors above 2,500 ANSI Lumens * LCD Projectors below 2,500 ANSI Lumens Projector Lamps 103 inc[...]

23[...]

Customer ’ s Record The model number and serial number of this product can be found on its rear panel. Y ou should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identi cation in the event of theft or loss, and for W arranty Service purposes[...]