Panasonic TH-5065PF10UK manual

Operating Instructions Manual de instrucciones High De fi nition Plasma Display Pantalla de Plasma de Alta De fi nición TQB2AA0762 The illustration shown is an image. Before connecting, operating or adjusting this product, please read these instructions completely . Please keep this manual for future reference. TH-50PF10UK TH-65PF10UK Model No. [...]

2 W ARNING: T o reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali fi ed service personnel. The lightning flash with arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a risk of electric shock to per sons. The exclamation point within[...]

3 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’ s instructions. 8 ) Do not install near any heat s[...]

4 T able of Contents Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new Plasma Display . T o obtain maximum benefit from your set, please r ead these Instructions before making any adjustments, and r etain them for futur e refer ence. Retain your pur chase r ecei[...]

5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed an[...]

6 Safety Precautions This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) CAUTION When using the Plasma Displa[...]

7 Safety Precautions / Maintenance W ARNING The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. • If the surface is particularly dirty , wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been dil[...]

8 Accessories Requires two AA batteries. 2. Insert batteries - note correct polarity ( + and -). Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter . Disposal of batteries should be in an environment-friendly manner . Observe the following precautions: 1. Batterie[...]

9 Connections 1 2 1 2 1 2 SERIAL PC IN AUDIO SLOT1 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN SLOT2 Speaker terminal (R) Speaker terminal (L) – Cable fi xing bands Secure any excess cables with bands as required. When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker ’s Install[...]

10 Connections 1 2 SERIAL PC IN AUDIO SLOT1 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO RL COMPONENT/RGB IN SLOT2 1 2 1 2 Speaker terminal (R) Speaker terminal (L) – Cable fi xing bands Secure any excess cables with bands as required. When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker ’s Install[...]

11 Connections PC Input T erminals connection Notes: • Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input T erminal. • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 1 10 kHz and vertical scanning frequency of 48 to 120 Hz. (Howev[...]

12 Connections SERIAL T erminals connection Notes: • Use the RS-232C cable to connect the computer to the Plasma Display . • The computer shown is for example purposes only . • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface speci fi cation, so that the Plasma Displa[...]

13 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN AUDIO OUT Y , P B , P R , OUT P R P B Y L R COMPONEN T VIDEO OUT Connections COMPONENT / RGB connection Notes: • Change the “COMPONENT/RGB-IN SELECT” setting in the “SET UP” menu to “COMPONENT” (when COMPONENT signal connection) or “RGB” (when RGB signal connection). [...]

14 Power ON / OFF When the POWER is turned on for the fi rst time, the LANGUAGE selection screen is displayed. From the second time on, language selection can be done from the setup menu. (see page 20) Select the desired language using the or button and press the ACTION ( ) button. Note: Set with the remote control. Buttons on the main unit are un[...]

15 Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Plasma Display on. Power Indicator: Green T urn the power to the Plasma Display off by pressing the switch on the unit, when the Plasma Display is on or in standby mode. Note: During operation o[...]

INPUT MENU ENTER/ + / VOL - / 16 Basic Controls MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 18) INPUT button (INPUT1, INPUT2, INPUT3 and PC selection) (see page 20) Main Power On / Off Switch Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit w[...]

17 Basic Controls OFF TIMER 90 1 2 3 PC NORMAL Standby (ON / OFF) button The Plasma Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 14). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. SET UP button (see page 18, 19) SOUND button (s[...]

18 Normal Viewing PICTURE SETUP SOUND POS. /SIZE On-Screen Menu Displays The MENU button on the unit can also be pressed. Each time the MENU button is pressed, the menu screen will switch. T o PICTURE adjust menu (see page 26) T o ADV ANCED SETTINGS (see page 26, 27) Press to select “ON”. Press to enter ADV ANCED SETTINGS. 1/2 PC OFF ST ANDBY S[...]

19 2 Press to access each adjust screen. Press the R button to return to previous menu. Press the R button to return to “SET UP” menu. Press to select POWER ON TIME / POWER OFF TIME. Press to set up POWER ON TIME / POWER OFF TIME. T o PRESENT TIME SETUP . (see page 31) SYNC VIDEO NR SIGNAL H-FREQ. V -FREQ. kHz Hz 33.8 60.0 [ RGB ] 3 : 2 PULLDOW[...]

20 Initial selections Selecting the On-Screen Menu Language Selecting the input signal Press to display the SET UP menu. Press to select OSD LANGUAGE. Press to select your preferred language. Selectable languages 1/2 PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL[...]

21 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: Notes: • For PC signal input, the mode switches between “NORMAL”, “ZOOM” and “FULL” only . • For a 1 125 (1080) / 60i · 50i · 60p ?[...]

22 Adjusting POS. /SIZE 0 NORMAL NORMALIZE AUTO SETUP POS. /SIZE V -POS 0 H-POS V -SIZE DOT CLOCK H-SIZE CLOCK PHASE 1:1 PIXEL MODE OFF 0 0 0 0 1 Press to display the POS. /SIZE menu. Press to select AUTO SETUP / H-POS / H-SIZE / V -POS / V -SIZE / DOT CLOCK / CLOCK PHASE / 1:1 PIXEL MODE. Press to adjust POS. /SIZE. Press to exit from adjust mode.[...]

23 While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. Helpful Hint ( / NORMALIZE Normalization) Adjusting POS. /SIZE AUTO SETUP Automatically adjust H-POS / V -POS / CL[...]

24 AB A B A B BA B A B A PC1 VIDEO2 PC1 VIDEO2 VIDEO2 VIDEO1 PC1 VIDEO2 A A A C B B B D MUL TI PIP MUL TI PIP SW AP SW AP SELECT SW AP MUL TI PIP MUL TI PIP Press repeatedly . Each time pressing this button main picture and sub picture will be displayed as follows below . Press to swap main picture and sub picture. Press to select the input mode. U[...]

25 Advanced PIP 1 2 3 5 Press to display the Setup menu. 4 6 Notes: • If “INPUT lock” in Options menu is set to other than “Of f”, MUL TI PIP function isn’t available. • Sound output is from the picture which is selected in Audio OUT (PIP) (see page 28). • In 2 screen display , the same input mode cannot be selected for the main pic[...]

26 2/2 ADV ANCED SETTINGS COLOR TEMP COLOR MANAGEMENT NORMAL OFF ON PICTURE 1/2 25 0 0 0 5 PICTURE NORMAL NORMALIZE ST ANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT Press to select “ON”. Press the left or right button to switch between modes. ST ANDARD For viewing in standard (evening lighting) environments. This menu selects the [...]

27 PICTURE Adjustments ADV ANCED SETTINGS Notes: • “COLOR” and “TINT” settings cannot be adjusted for “RGB/PC” and “Digital” input signal. • Y ou can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT , SHARPNESS) for each PICTURE MENU. • The “TINT” setting can be adjusted for NTSC signal only during “VI[...]

28 0 0 0 1/2 SOUND NORMAL NORMALIZE ST ANDARD OFF TREBLE AUDIO MENU BALANCE BASS 0 MID SURROUND MAIN AUDIO OUT (PIP) SOUND Adjustment BASS Adjusts low pitch sounds MID Adjusts normal sounds TREBLE Adjusts pitch sounds BALANCE Adjusts left and right volumes SURROUND Select ON or OFF Note: BASS, MID, TREBLE and SURROUND settings are memorized separat[...]

29 MUTE Useful when answering the phone or receiving unexpected visitors. Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed. Notes: • This menu is available only when selecting a slot that HD-SDI T erminal Board with audio (TY -FB10HD) is installed. [...]

30 INPUT MENU ENTER/ + / VOL - / VOL button Digital Zoom This displays an enlargement of the designated part of the displayed image. Select the area of the image to be enlarged. Press on the enlargement location to select. Return to normal display (quit Digital Zoom). Press to exit from the Digital Zoom. Notes: • When power goes OFF (including ?[...]

31 PRESENT TIME SETUP / SET UP TIMER PRESENT TIME SETUP The timer can switch the Plasma Display ON or OFF . Before attempting T imer Set, con fi rm the PRESENT TIME OF DA Y and adjust if necessary . Then set POWER ON TIME / POWER OFF TIME. Press to display the SET UP menu. Press to select SET UP TIMER or PRESENT TIME SETUP . Press to display the S[...]

32 PRESENT TIME SETUP / SET UP TIMER SET UP TIMER Press to select POWER ON TIME / POWER OFF TIME. Press to set up POWER ON TIME / POWER OFF TIME. button: Forward button: Back Notes: • Pressing “ ” or “ ” button once changes POWER ON TIME / POWER OFF TIME 1 minute. • Pressing “ ” or “ ” button continuously changes POWER ON TIME /[...]

33 Do not display a still picture, especially in NORMAL mode, for any length of time. If the display must remain on, a SCREENSA VER should be used. NEGA TIVE / SCROLL selection 2 3 1 4 Press to display the SET UP menu. Press to select the SCREENSA VER. Press to select the SCREENSA VER screen. Press to select the FUNCTION. Press to select the desire[...]

34 Setup of SCREENSA VER T ime After selecting TIME OF DA Y or INTER V AL, the relevant T ime Setup will become available for selection and the Operating T ime may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.) Press to select ST ART TIME / FINISH TIME (When TIME OF DA Y is selected). Press to select SHOW DURA TION / SA VER [...]

35 SIDE BAR ADJUST 1 Press to select the SIDE BAR ADJUST . Press to select OFF , DARK, MID, BRIGHT . Press to exit from SCREENSA VER. 2 Do not display a picture in NORMAL mode for an extended period, as this can cause an image retention to remain on the side panels either side of the display fi eld. T o reduce the risk of such an image retention, [...]

36 Reduces power consumption Press to select “POWER SA VE” “ST ANDBY SA VE” “POWER MANAGEMENT” “AUTO POWER OFF”. Press to select “ON” or “OFF”. On Of f Press to exit from SET UP . • POWER SA VE: When this function is turned ON, luminous level of the Plasma Display is suppressed, so power consumption is reduced. • ST ANDB[...]

37 By lining up Plasma Displays in groups, for example, as illustrated below , an enlarged picture may be displayed across all screens. For this mode of operation, each plasma display has to be set up with a Display number to determine its location. Press to display the SET UP menu. Press to select the MUL TI DISPLA Y SETUP . Press to display the ?[...]

38 SET UP for MUL TI DISPLA Y How to set the Display location number for each Plasma Display Display Number locations for each arrangement. (Examples) 4 7 A1 OFF AI-SYNCHRONIZA TION LOCA TION MUL TI DISPLA Y SETUP OFF OFF MUL TI DISPLA Y SETUP HORIZONT AL SCALE VERTICAL SCALE SEAM HIDES VIDEO × 2 × 2 MUL TI DISPLA Y SETUP OFF OFF A1 LOCA TION MUL[...]

39 Press twice to exit from SET UP . 9 SET UP for MUL TI DISPLA Y Y ou can set the remote control ID when you want to use this remote control on one of several different displays. 1 2 3 Switch to on the right side. Press the button on the remote control. Press one of - , for the tens digit setting. Press one of - , for the units digit setting. 4 No[...]

40 Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically . The image will be enlarged 3 times and rotated 90-degree. SET UP for PORTRAIT (Example) Press to display the SET UP menu. Press to select the PORTRAIT SETUP . Press to display the “PORTRAIT SETUP” menu. Press to select the PORTRAIT SETUP[...]

41 SET UP for PORTRAIT Press to select VIEWING AREA or LOCA TION. Press to select each function. Notes: • When the input signal is FULL, VIEWING AREA is fi xed to “16:9”. • When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”. Press twice to exit from SET UP . 7 6 Press to select AI-SYNCHRONIZA TION. Press to select ?[...]

42 SET UP for Input Signals 3D Y/C FIL TER – For NTSC A V images COMPONENT / RGB IN SELECT Select to match the signals from the source connected to the COMPONENT / RGB input terminals. Y, P B , P R signals “COMPONENT” R, G, B, HD, VD signals “RGB” Press to display the SET UP menu. Press to select the “COMPONENT / RGB-IN SELECT”. Press[...]

43 3D Y/C FIL TER (NTSC) COLOR SYSTEM SIGNAL AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF NORMAL [ VIDEO ] VIDEO NR OFF REFRESH RA TE 100 Hz Block NR Mosquito NR OFF OFF SYNC VIDEO NR SIGNAL AUTO H-FREQ. V -FREQ. kHz Hz 33.8 60.0 [ RGB ] 3 : 2 PULLDOWN OFF OFF REFRESH RA TE 100 Hz Block NR Mosquito NR OFF OFF 3 : 2 PULLDOWN VIDEO NR SIGNAL OFF RE[...]

44 3:2 PULLDOWN COLOR SYSTEM / Panasonic AUTO Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.(“SIGNAL [VIDEO]” menu is displayed.) SET UP for Input Signals Press to select the “COLOR SYSTEM” or “Panasonic AUTO”. Press to select each function. If the image becomes unstable: With the system set on Auto, [...]

45 SET UP for Input Signals Select SIGNAL from the “SET UP” menu during RGB input signal. Press to adjust. Press to exit from adjust mode. SYNC Setting RGB sync signal Con fi rm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal). AUTO: The H and V sync or synchronized signal are automatically selected. If both[...]

46 1 2 3 5 Press to display the Setup menu. 4 6 Item Effect Adjustments Weekly Command Timer Sets Weekly Command Timer . (see page 50) Onscreen display On Off On: Displays all the following on screen. • Power on display • Input signal switch display • No signal display • Mute and the remaining time of off-timer after was pressed. Off: Hides[...]

47 Item Effect Adjustments Initial VOL level Off On Press button to adjust the volume when the unit is turned on. Off On Off: Sets normal volume. On: Sets your preferred volume. Notes: • When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range. • Y ou can hear the changed volume regardless of yo[...]

48 Item Effect Adjustments Off-timer function Enable Disable Enable: Enables the “Off-timer function”. Disable: Disables the “Off-timer function”. Note: When “Disable” is set, the Off-timer is cancelled. Initial Power Mode Normal Standby On Sets the power mode of the unit for when the power recovers from failure or after plugging off an[...]

49 Item Effect Adjustments Slot Power Off Auto On Off: Power is not transmitted to the slot power . Auto: Power is transmitted to the slot power only when main power is on. On: Power is transmitted to the slot power when main power is on or in the standby state. Note: In some cases, power is transmitted to the slot power when main power is on or in[...]

50 Options On Weekly Command T imer Onscreen display 1/3 Weekly Command T imer On Program1 Function Monday Program3 T uesday --- Wednesday Program3 Thursday --- Friday Program6 Saturday Program4 Sunday Program Edit Weekly Command T imer Program1 On Monday Function Program3 T uesday --- Wednesday Program3 Thursday --- Friday Program6 Saturday Progra[...]

51 Weekly Command T imer 20:00 20:30 57 58 8/8 22:00 59 --:-- 60 --:-- --:-- 61 --:-- 62 --:-- A VL:00 DAM:NORM POF --- --- --- --- --- 63 64 1 Program Weekly Command T imer 8:00 10:30 02 01 1/8 --:-- 03 --:-- 04 --:-- --:-- 05 12:00 06 9:12 PON IMS:SL1 --- --- --- --- DAM:ZOOM A VL:10 07 08 1 Program Weekly Command T imer 02 10:30 Command No T ime[...]

52 Shipping condition This function allows you to reset the unit to the factory setting. 1 2 3 4 Press to display the SET UP menu. Press to select “OSD LANGUAGE”. Press and hold till the SHIPPING menu is displayed. Press to select “YES”. Press to con fi rm. [from the unit] 1 Press the MENU button till the Setup menu is displayed. 2 Press t[...]

53 T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound V olume (Check whether the mute function has been activated on the remote control.) No Picture[...]

54 COMPONENT/RGB/PC/VIDEO input signals Signal name Horizontal frequency (kHz) V ertical frequency (Hz) Component / RGB / Mini D-sub 15P (Dot clock (MHz)) 1 525 (480) / 60i 15.73 59.94 * (13.5) 2 525 (480) / 60p 31.47 59.94 * (27.0) ∗ 4 3 625 (575) / 50i 15.63 50.00 * (13.5) 4 625 (575) / 50p 31.25 50.00 * (27.0) 5 625 (576) / 50p 31.25 50.00 6 7[...]

55 COMPONENT/RGB/PC/VIDEO input signals Signal format V ertical frequency (Hz) Horizontal frequency (kHz) Dot clock (MHz) Number of active pixels T otal number of pixels Number of active lines T otal number of lines 1 VGA60 59.94 31.47 25.18 640 800 480 525 2 525/60p 59.94 31.47 27.00 720 858 480 525 3 625/50p 50.00 31.25 27.00 720 864 576 625 4 75[...]

56 Command list of W eekly Command T imer No. Command Control details 1 AAC:MENCLR Audio Menu (Clear) 2 AAC:MENDYN Audio Menu (Dynamic) 3 AAC:MENSTD Audio Menu (Standard) 4 AAC:SURMON Surround (ON) 5 AAC:SUROFF Surround (OFF) 6 AMT :0 Audio Mute (OFF) 7 AMT :1 Audio Mute (ON) 8 ASO:M Audio out when PIP mode (Main Picture) 9 ASO:S Audio out when PIP[...]

57 TH-50PF10UK TH-65PF10UK Power Source 120 V AC, 50/60 Hz Power Consumption Power on 650 W 790 W Stand-by condition Save OFF 0.6 W , Save ON 0.4 W Power off condition 0.1 W Plasma Display panel Drive method : AC type 50-inch, 16:9 aspect ratio Drive method : AC type 65-inch, 16:9 aspect ratio Screen size 43.5” (1,106 mm) (W) × 24.5” (622 mm) [...]

58 Panasonic Professional Display Company , Unit of Panasonic Corporation of North America One Panasonic W ay 2A-4 Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. A ve. 65de Infanteria, Km.9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985 P ANASONIC PLASMA SCREEN Limited W arranty Models or Parts Part W arranty Labor W arranty Plasma Scree[...]

59 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 LIMITED W ARRANTY ST A TEMENT Item Video Tape P2/SD Cards Video Heads D5 Video heads Maintenance Items Colour Camera CCD Imaging Block LCD/CRT Monitors * DLP™ Projectors * LCD Projectors above 2,500 ANSI Lumens * LCD Projectors below 2,500 ANSI Lumens Projector Lamps 103 inc[...]

Panasonic Professional Display Company Unit of Panasonic Corporation of North America Executive Of fi ce : One Panasonic W ay 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE : One Panasonic W ay 4E-7 Secaucus, NJ 07094 (201) 348-7621 Mid-Atlantic/New England : One Panasonic W ay 4E-7 Secaucus, NJ 07094 (201) 348-7621 Southeast Region : 1225 N[...]