Panasonic SC-PMX70B manual

RQT9988-B EG EB GN 2015/03/17 Thank you for purchas ing t his product. Please read these instructions carefully be fore using this product, and save this manual for fut ure use. Model number suff ix “EB” denotes UK model. [For_the_United_Kin gdom_and_Irel and] Sales and Support In formation Customer Communications Cent re • For customers with[...]

RQT9988 2 Do the procedures with the remote control. Y o u can also use the buttons on the main unit i f they are the same. Y our sys tem and the illustrations can look diff erently . These operating instructio ns are applicable to the following system. Unless otherwise indicated, illustrations in these operating instructions are of SC-PMX70. MPEG [...]

3 RQT9988 Caution for AC Mains Lead (For the AC mains plug of three pins) For your safety , please read the following text carefully . This appliance is supplied with a moulded three pin mains plug for your safety and con venience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement f use h[...]

RQT9988 4 Placement o f speakers Place the speakers so that the tweeter is on the inner side. T o prevent damage to the speakers, do not touch the speaker cones if you remove the net s. Use only the supplied speakers. The combination of the main unit and speaker s give the best sound. Y ou can cause damage to the system and decrease the sound q ual[...]

5 RQT9988 Overview o f controls 1 St andb y/on switch [ Í ], [ Í /I ] Press to switch the unit fr om on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power . 2 Numeric buttons [1 to 9, 0, S 10] • T o select a 2-digit number Example: 16: [ S 10] > [1] > [6] • T o select a 3-digit number Exa[...]

RQT9988 6 About Bluetooth ® Frequency band used • This system uses the 2.4 GHz frequency band. Certification of this device • This system confo rms to frequency restrictions and has received certi fication based on frequency laws. Thus, a wireless permit is not necessary . • The actions below ar e punishable by law in some countries: - T aki[...]

7 RQT9988 1 Press [ ] to select “BLUETOOTH”. 2 Touch and hold your device on the NFC touch area of this unit [ ]. ( > 5) Do not move the Bluetoot h ® device until it beeps, displays a message or reacts in some way . Once the Blu etooth ® device has reacted, move the device away from this unit. • When the registration and connection of th[...]

RQT9988 8 • This unit does not guara ntee connection with all USB device s. • F A T12, FA T16 and F A T32 f ile systems are supported. • This unit su pports USB 2.0 High S peed. • This unit ca n support USB devices of up to 32 GB. • Supported file formats an d extensions: MP3 (“.mp3”), AIFF (“.aif f”), FLAC (“.flac”), W A V (?[...]

9 RQT9988 Press [DISPLA Y] repeatedly . e.g. MP3 Note: • Maximum characters that can be shown: approximately 32 • This system supports ver . 1 and 2 ID3 tags. • T ext data that the system does not support can show differently . 1 Press [PLAY MENU] t o select “PLAYMODE” or “REPEAT”. 2 Press [ 2 , 1 ] to select the setting and then pres[...]

RQT9988 10 Press [DISPLA Y]. • For Continental Europe: Press [DISPLA Y] repeatedly to select “FM ST ATUS”. (For Continental Europe only) This system can show the text data transmitted by the radio data system (RDS) available in some area s. Press [DISPLA Y] repeatedly . Note: • RDS is available only when stereo works in reception. • RDS m[...]

11 RQT9988 Clock and timers This is a 24-hour clock. 1 Press [CLOCK/TIMER] to se lect “CLOCK”. 2 Press [ 3 , 4 ] to set the time and then press [OK]. T o check the tim e Press [CLO CK/TIMER]. Note: • Reset the clock regularly to maintain accuracy . The sleep timer switches off the system after the se t time. Press [SLEEP] repea tedly to selec[...]

RQT9988 12 Others As a factory default, this unit will turn to st andby mode automatically if there is no sound and it is not being used for approximate ly 20 minutes. T o cancel this function 1 Press [SETUP] repeatedly to select “AUTO OFF”. 2 Press [ 2 , 1 ] to select “OFF” and then press [OK]. Note: • T o turn the function on, select ?[...]

13 RQT9988 The device is connected but audio cannot be heard through this system. • For so me built-in Bluetoot h ® devices, you have to set the audio output to “SC-PMX7 0” manually . Read the operating instructions for the device for details. The sound is interrupted. • The device is out of the 10 m communication range. Bring the Bluet oo[...]

RQT9988 14 Specification s Power supply AC 220 V to 240 V , 50 Hz Power consumption 44 W Dimensions (main unit) (W x H x D) 21 1 x 1 14 x 267 mm Mass (main unit) Approx. 2.8 k g Operating temperature ra ng e 0°C to +40°C Operating humidity range 35% to 80% RH (no condensation) RMS output power Front Ch (both ch driven) 60 W per channel (3 ™ ), [...]

15 RQT9988 Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warran[...]

[Safety_inf ormation_for_cus tomers_in_Nor way] NORSK Produkt • For å redusere faren for bran n, elektrisk støt eller skade på apparatet : - Dette apparatet må ikke ut settes for regn, fuktighet, drypp eller sprut. - Ikke plasser objek ter som er fylt med væske, som vaser , på app aratet. - Bruk kun anbefalt tilbehør . - F jern ikke deksle[...]