Oricom P900 manual

Oricom P900 Series 1.8GHz DECT Cordless phone with answering system Keep this user guide for future reference. WARNING DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT, AS THERE IS A RISK OF EXPLOSION AND/OR INJURY. USE ONLY Ni-MH RECHARGEABLE BATTERIES AS SPECIFICED IN THIS USER GUIDE. CONTACT ORICOM FOR REPLACEMENT BATTERIES[...]

2 Content SAFETY INFORMATION ............................................................................................ 4 Pack Cont ents ............................................................................................................. 6 GETTING STARTED....................................................................................[...]

3 Reset ......................................................................................................................... 1 9 INTEGRATED DIGITAL ANSWERING MACHINE ................................................... 20 Display.....................................................................................................................[...]

4 SAFETY INFORMATION • Avoid exposure of this tel ephone to moisture or liquid. • To prevent electric shock, do not open the handset or base cabinet. • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors. • There is a slight chance that the telephone could be damaged by an electrical storm. I[...]

5 CAUTION This telephone is not designed for making emergency telephone calls when the mains power fails. Always have a corded phone available to be able to make and receive calls to emergency services if the mains power fails. Do not use your telephone during an electrical storm thunderstorm as it is possible to get an electric shock. Refer to inf[...]

6 Pack Contents Depending on the model you have purchased the pack should contain the following items:- P900 P900+1 P900+2 P900+3 Base units 1 1 1 1 Handsets 1 2 3 4 Charger adaptors NIL 1 2 3 Power adaptors 1 1 1 1 Phone cords 1 1 1 1 User guide and Warranty card 1 1 1 1 Handset Rechargeable AAA Ni-MH Batteries (1.2V 650mAh) 2 4 6 8 If any of thes[...]

7 GETTING STARTED Your handset Redial LCD Display Talk / Recall CID / Scroll forward CID / Scroll backward Mute / Delete OK / Program # / Keylock / Pause Intercom / Conference Phonebook Off / Exit ¿ / Ringer On-Off GETTING STARTED[...]

8 LCD display on the handset The handset is linked to the base Displays the current battery level. It scrolls during charging. Appear together with either handset or base ringer setting. Use to set the handset ringer. Use to set the base ringer. Use to set the recall duration. Use to register the handset. There are more digits on the left There are[...]

9 Basic steps to install 1. Connect the output plug of the mains adapter to the adapter socket on the back of the base unit and the mains adapter to the wall mains supply. 2. Connect the telephone lead to the phone cord socket on the back of the base unit and to the wall phone socket. 3. Remove the battery door on the handset by lifting the battery[...]

10 BASIC OPERATIONS During standby When the phone is in standby, the LCD displays the handset name. The handset number related to the connected base will also be displayed right justified. The battery icon refl ects the current battery level and the signal icon indicates the handset is linked to the base. Answering an incoming external call When th[...]

11 Pre-dialling Pre-dial allows you to enter a telephone number and verify it on the screen before you place the call. T he screen displays the last 12 digits dialled but you can enter up to 20 digits. 1. Enter the phone number. 2. To enter a pause, press and hold # . A pause is displayed as “ P ”. 3. When you enter more than 12 digits, turns o[...]

12 When you end a call, the timer will be displayed for 5 seconds before the screen returns to the handset label. Adjusting the volume During a call you can adjust the earpiece volume. Press to adjust the receiver volume. The display shows the volume level of high “ OOO ”, medium “ OO ” or low “ O ”. NOTE: When you hang up the volume wi[...]

13 Take two different calls at the same time If you have subscribed to your telephone network operators Call Waiting Caller ID service, your phone will display the number of the second incoming call for around 60 seconds while you are talking on the phone. During a call, you will hear two loud beeps periodically to notify you of another incoming ca[...]

14 Call back from a CID record While you are viewing a CID record, you can return the call provided that it contains a valid phone number by pressing . Saving a CID record to phonebook You can save a CID record into t he phonebook provided that it contains a valid phone number and the phonebook is not full. While you are viewing the CID record that[...]

15 Storing a previously dialled number into phonebook While you are reviewing a previously dialled number that you would like to save, 1. Press . 2. Use the number keys to enter the name. If you make a mistake, use DEL to do the editing. A name can contain up to 8 characters. If there’s already a phonebook record matching the number, that phonebo[...]

16 DEL to do the editing. A name can contain up to 8 characters. 4. Press OK to confirm the name. You will be alerted to edit the name if it is a duplicated name in the existing phonebook records. 5. You are now prompted with the phone number that you just entered. Edit the number if necessary. 6. Press OK to save the number. The phonebook record i[...]

17 Deleting a phonebook record 1. During standby mode, press . 2. Press to search for the record that you would like to delete. Or you can use the number keys to jump directly to the record starting with the corresponding letters of that key. 3. Press OK to select the record to be deleted. Press OK repeatedly to view the rest of the record informat[...]

18 Base ringer melody & volume 1. Press PROG during standby and press or until you see flashing. 2. Press OK to select. 3. Press to listen to and select from the 5 melodies. 4. Press OK to confirm your selection and you will be prompted to volume Setting. 5. Press to listen to and select from the different volume levels. 6. Press OK to confirm [...]

19 4. Enter the PIN of the base and press OK . You will hear a confirmation tone if t he registration is successful. The handset label and the handset number will be displayed. If the registration is not successful, you will see NOT REG on the handset. Follow the procedure and try again. Deregister A handset can deregister another handset registere[...]

20 INTEGRATED DIGITAL ANSWERING MACHINE Delete z Pin OGM 7-Segment Display Memo Ring A nswer Machine On / Off Volume Up / Scroll Up Call Screening / Next Message Volume Down / Scroll Down Stop / Play Message Alert / Previous Message Page Mic[...]

21 Display There is a display on the answering machine. The following table describes what the symbols mean. Display Meaning FU Memory is full. No new messages can be recorded. -A The answer machine is being accessed from an external touch tone phone. OG OGM -- -- -- Memo r2 2 rings r3 3 rings r4 4 rings r5 5 rings r6 6 rings r7 7 rings tS Time sav[...]

22 1. Press during standby mode. The 7-segment LCD displays On if the answering machine is activated or Of if the answering machine is deactivated. The 7-segment LCD will be On when the answering machine is turned on. When the answering machine is on, it will answer the call after a certain number of rings depending on the ring delay setting (See p[...]

23 When memory is full, no incoming message will be recorded. The answering machine will announce th e following outgoing me ssage (OGM) and release the line. “ Hello, we’re sorry your call cannot be taken at the moment, and you cannot leave a message, so please call later. ” Recording an OGM The maximum OGM length is 40 seconds. You do not n[...]

24 Incoming messages (ICM) The answering machine can record up to 60 messages each message can be up to 2 minutes long. When a new message is saved, the 7-s egment LED will blink to indicate the number of new messages being stored in the answering machine. During ICM recording, if the call is answered by a registered handset or a parallel phone, th[...]

25 Deleting all ICMs To delete all ICMs, during standby, 1. Press for 2 seconds. The answering machine emits 2 short beeps. 2. Press again within 5 seconds to permanently delete all new and old messages or press to cancel deletion. Recording a memo You can record one memo. The maximum recording time is 2 minutes. A second memo cannot be recorded un[...]

26 Deletin g the memo 1. Press while listening to the memo. The memo will be deleted. Call screening Call screening allows you to hear the caller before you pick up the call by turning on the answering machine’s speaker during the recording of incoming messages. To turn call screening on/off 1. Press during standby. The 7-segment LCD displays On [...]

27 To review the current ring delay setting, 1. Press during standby. The 7-segment LCD displays the current setting such as r2 for 2 rings. To change the ring delay setting, 1. Press for 2 seconds. The 7-segment LCD displays the current setting such as r2 for 2 rings. 2. Use or to adjust the number of rings. 3. Press again to confirm. The 7-segmen[...]

28 Remote access You can access your answering machine when you are away from home by using any touch tone phone. You security PIN protects unauthorised access to your answering machine from a remote location. To access the answering machine remotely, 1. Make a call from an external phone to your answering machine. 2. If your answering machine is t[...]

29 During message playback, At the beginning of the message, Press 1. To play the previous message During the message playback, Press 1 twice. To repeat the current message Press 2 To play the next message Press 3 To stop the message play back Press 5 To delete the current message Press 0 OTHER FEATURES Key lock Press and hold during standby to loc[...]

30 Message waiting indication You have to subscribe to a voice message service (eg Telstra Message Bank) from your local service provi der to use this feature. When you receive a voice message, will appear on the display. When you retrieve your messages the message will turn off. You can also turn it off by pressing for 2 seconds during standby. Pa[...]

31 Making an internal call When the phone is in standby, 1. Press INT . turns on and you’ll hear an internal dial tone. 2. Press the number of the handset that you want to call. (Or you can press the handset number first, followed by INT .) You will hear a busy tone if the ot her handset is not available. To end an internal call, press or return [...]

32 TROUBLESHOOTING Are you having trouble with your phone? Here are some of the most commonly asked questions and solutions. Problems Solutions The phone does not work at all • Make sure that adaptor and phone cord are connected properly. • Check that the batteries are fully charged and installed properly. • This phone does not work during po[...]

33 Unable to record a memo. • Check to see if there is already a memo. If so, delete the old one. • Check to see if the answering machine is full. If so, delete some or all messages. Unable to perform remote operation. • Make sure you entered the correct security code. • Use a touch-tone phone. The 7-segment LCD blinks FU . • Memory is fu[...]

34 Caller ID Customers using non Telecom toll services should not use the dial back feature for local calls as this will incur a charge only the 7 digit number should be dialled. Some of the CID services listed may not be available in New Zealand. This telephone is not designed for making emergency telephone calls when the power fails. Make alterna[...]

35 This product is covered by a 12 month warranty against defective workmanship or parts. The warr anty does not extend to damage caused by misuse, negligence, excessive vo ltage, faults on the telephone line or lightning. This guarantee in no way affect s your statutory rights. Full details of the warranty are contained in the enclosed warranty ca[...]