NordicTrack 4200 R manual

USER'S MANUAL CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this man- ual for future reference. Serial Number Decal Model No. NETL92130 Serial No. Find the serial number in the location shown below. Write the serial number in the space above for reference. Part No. 196689 R0703A Printed in USA[...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . .[...]

P ART LIST—Model No. NETL92130 R0703A To locate the parts listed below, see the EXPLODED DRAWING attached in the centre of this manual. Key No. Qty. Description Key No. Qty. Description 1 1 Allen Wrench 2 2 Rear Wheel Bolt 3 1 Rear Endcap (Left) 4 2 Roller Star Washer 5 2 Rear Roller Adj. Bolt 6 2 Rear Wheel 7 4 U-nut 8 8 Endcap Bolt 9 1 Roller G[...]

22. When using iFIT.com CDs and videos, you can manually override the speed and incline settings at any time by pressing the speed and incline buttons. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program. 23. Always remove iFIT.com CDs and videos from your CD player or VC[...]

Thank you for selecting the revolutionary NordicTrack ® 4200 R treadmill. The 4200 R treadmill offers an im- pressive array of features to make your home work- outs more enjoyable and effective. And when you’re not exercising, the unique 4200 R can be folded up, re- quiring less than half the floor space of other treadmills. For your benefit, re[...]

ASSEMBL Y Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own flat-bladed screwdriver , wire cutters , and adjustable spanner . Note: The underside of the treadmill walking bel[...]

6. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 28). To protect the floor or carpet from damage, place a mat under the treadmill. 30 7 5. Insert two Handrail Bolts (104) with Handrail Bushings (106) into t[...]

29 8 HOW TO PUT ON THE CHEST PULSE SENSOR The chest pulse sensor consists of two components: the chest strap and the sensor unit (see the drawing below). Insert the tab on one end of the chest strap into one end of the sensor unit, as shown in the inset draw- ing. Press the end of the sensor unit under the buckle on the chest strap. The tab should [...]

28 9 PROBLEM: The walking belt slows when walked on SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm 2 (14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Using[...]

10 27 FEATURES OF THE CONSOLE The advanced console offers an impressive array of features designed to help you get the most from your exercise. When the manual mode is selected, the speed and incline of the treadmill can be changed with a touch of a button. As you exercise, the console will provide continuous exercise feedback. You can even measure[...]

11 26 Plug in the power cord. See page 9. Make sure the on/off switch is in the on position. Locate the on/off switch on the treadmill near the power cord. Make sure the on/off switch is in the on position. Attach the clip to the waistband of your clothes. Stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing [...]

25 12 Follow your progress with the displays. The Program dis- play —When the manual mode or the iFIT.com mode is selected, the program display will show a track representing 1/4 mile. As you exercise, the indica- tors around the track will light in sequence until you have walked or run 1/4 mile. A new lap will then begin. The Training Zone dis- [...]

24 13 resting on the upper contacts, and your fin- gers must be touching the lower contacts— avoid moving your hands . When your pulse is detected, the Heart Rate indicator will flash, two or three dashes (– – –) will appear in the Incline/Heart Rate display, and then your heart rate will be shown. For the most accurate heart rate reading, [...]

Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are soon to be available. See www.iFIT.com for details. To use programs from our Web site, the treadmill must be connected to your home computer. See HOW TO CONNECT YOUR COMPUTER on page 20. In addition[...]

15 22 Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 11. Select one of the custom programs. When the key is inserted, the man- ual mode will be selected. To select a custom program, press the Select Program button repeatedly until the Learn 1 or Learn 2 indicator lights. Note: If the custom program has not yet been defi[...]

HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 20. A. Plug one end of the audio cable into the ja[...]

17 20 Follow the steps below to use a heart rate program. Note: You must wear the chest pulse sensor to use a heart rate program. Put on the chest pulse sensor. See page 8. Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 11. Select a heart rate program. When the key is inserted, the man- ual mode will be selected. To sel[...]

18 19 During the program, the console will regularly compare your heart rate to the current target heart rate setting. If your heart rate is too far below or above the target heart rate setting, the speed of the treadmill will automatically increase or de- crease to bring your heart rate closer to the target heart rate setting. If the speed reaches[...]

124 93 75 121 98 97 97 95 136 136 95 92 92 92 91 94 93 93 93 90 122 123 96 96 96 11 9 100 102 103 101 42 127 127 59 59 11 8 11 8 106 104 106 104 144 140 141 11 9 103 102 100 101 42 82 81 83 84 85 85 86 84 7 7 80 73 105 58 105 11 7 87 88 88 87 88 87 88 87 87 7 137 87 87 87 87 87 87 87 11 6 87 87 11 5 89 87 79 87 133 132 17 56 99 11 3 111 11 0 107 10[...]

62 55 42 44 46 44 39 40 41 42 43 42 47 57 33 32 43 126 63 63 37 36 86 38* 49 120 48 48 48 120 66 86 27 53 138 34 35 138 34 35 21 20 29 28 78 28 45 54 86 64 67 135 43 142 130 86 65 52 50 42 51 86 19 48 69 68 73 72 74 86 86 48 70 87 87 71 76 77 137 137 129 86 139 86 86 143 134 128 60 60 20 31 30 54 27 1 15 18 18 61 125 87 19 22 23 25 14 2 11 6 10 9 6[...]