Morphy Richards 27005 manual

3 band RDS portable radio 27005 OPERA TING INSTRUCTIONS[...]

Snooze Alarm button ILLUSTRA TION Sleep button Memory Distance local switch T ext 1/6...5/10 preset buttons AF Band switch Display PTY T r affic On/Off Time set Key lock + / - Head phone socket T one control V olume T elescopic aerial Handle grip AC Input socket 1[...]

CONTROLS HEADPHONES - for headphones with 3.5mm jack plug. When connecting a headphone to this socket, the bui lt-in loudspeaker is automatically switched of f . ON/OFF - to switch the radio on and off -T o switch off the alarm (radio or buzzer) when alarm function is activated -T o switch off the radio before the preset sleep time has elapse[...]

BASE OF THE RADIO Key lock - to lock and unlock al l buttons REAR OF THE RADIO AC mains input socket - for connecting the mains cable BATTERY COMPARTMENT -Insert four R14/size C batteries in the polari ty indicated f or r adio operation. -Insert two R03/AAA station memory backup batteries. RESET -Static charges of carpets etc. can effect the intern[...]

POWER SUPPL Y BATTERY OPERATION • Open the lid of the battery compartment (found at rear of unit) • Insert 4 x R14/size C batteries. Ensuring correct polari ty is observed. • Close the battery compartment l id. ( These bat teries serv e as a power supply for radio operation without mains connection. Back up batteries for clock and preset memo[...]

RDS FEATURES The R adio Data System (RDS) i s an information system transmi tted in addition to the VHF (FM) radio programme. STATION NAME The station name or an abbreviation is shown in the display instead of the tuned f requency (Example: GALAXY). ALTERNATIVE FREQUENCIES (AF) It is possible to switch to a frequency wi th the same programme using [...]

Automatic memory • The tuner starts searching automatically the FM band and stores the received stations into the 10 pr eset memories (regardless of the position of the waveband switch). -The RDS stations ha ve a higher priority than other stations and wi ll be stored first. -T o interrupt the automatic memory set up process, press the MEMORY but[...]

RADIO OPERATION • Switch on and off with the ON/OFF swi tch. • Adjust the v olume wi th the VOLUME control. • The tone can be adjusted wi th the TONE control. Aerials -The telescopic aerial is intended for receiving FM (VHF) stations. -The aerial should be f ully extended and rotated unti l best results are achieved. For receiving MW and L W [...]

As a result of poor reception condi tions during automatic station search, the station r eceived ma y not optimally be tuned. In this case, briefly press the + or - button once or twice until the station is corr ectly tuned. If the tuned station contains the RDS (Radio Data System) information, the symbol is shown on the display and after a short t[...]

Storing stations There ar e 10 memory locations in each waveband available for storing stations (in total 30 memory locations). • T une to the station y ou w ant to store. • Press the MEMORY button. -The indication  MEMORY  will flash on the displa y for 8 seconds. • Press the button (1...10) to which you wish to assign a station. -Pres[...]

-With the EON symbol displayed, the radio will automatically tune to a station t ransmitting a traffic announcement. -The radio will automatically tune to the station broadcasting a traffic announcement. -During the EON tra ffic announcement the EON symbol on the display flashes and the volume will be increased. • When the announcement is over , [...]

CLOCK SETTING Setting the clock automatically The time and the day of the week can be set automatical ly when receiving on RDS station which transmits the clock time (CT) information. Please note that not every RDS station tr ansmits the clock time information. This inf ormation (when available) is transmitted by the RDS radio station once ev ery m[...]

Setting the alarm time • Press the ALARM button. -The displa y shows the present alarm time. • Press and hold down the ALARM button and set the alarm time with the +/- bu ttons ( in the same way as the clock time). Displaying the alarm time The alarm time can be checked wi th the DISPLAY button, wi thout changing the alarm mode: • Make sure t[...]

Switching off the alarm • The alarm function can be switched off b y pressing the ON/OFF but ton. -The alarm remains set to operate the next day . -If you wish to switch off the alarm completely , press the ALARM button briefly until the alarm indicator disappears. Going to sleep while listening to the radio • Press the SLEEP b utton briefly . [...]

GENERAL Technical specification W avebands FM 87 .5 - 108 MHz MW 522 - 1620 kHz LW 144 - 281 kHz Power output AC mains lead : 230v 50/60Hz Batteries Radio : 4 x R14 / C size (not included) Back-up : 2 x RO3 / AAA batteries (not included) W arning labels W ARNING: to reduce the risk of electric shock, do not expose this appliance to rain or moisture[...]

GUARANTEE Morphy Richards products are manufactured to internationally accepted quality standards. In addition to your statutory rights, Morphy Richards guarantee your prod- uct to be free from manufacturing and component defects for a period of TWO YEARS from date of purchase. If your product proves to be defective within 28 days of purchase, your[...]