Lowrance electronic 2000 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92

Ir para a página of

Bom manual de uso

As regras impõem ao revendedor a obrigação de fornecer ao comprador o manual com o produto Lowrance electronic 2000. A falta de manual ou informações incorretas fornecidas ao consumidor são a base de uma queixa por não conformidade do produto com o contrato. De acordo com a lei, pode anexar o manual em uma outra forma de que em papel, o que é frequentemente utilizado, anexando uma forma gráfica ou manual electrónicoLowrance electronic 2000 vídeos instrutivos para os usuários. A condição é uma forma legível e compreensível.

O que é a instrução?

A palavra vem do latim "Instructio" ou instruir. Portanto, no manual Lowrance electronic 2000 você pode encontrar uma descrição das fases do processo. O objetivo do manual é instruir, facilitar o arranque, a utilização do equipamento ou a execução de determinadas tarefas. O manual é uma coleção de informações sobre o objeto / serviço, um guia.

Infelizmente, pequenos usuários tomam o tempo para ler o manual Lowrance electronic 2000, e um bom manual não só permite conhecer uma série de funcionalidades adicionais do dispositivo, mas evita a formação da maioria das falhas.

Então, o que deve conter o manual perfeito?

Primeiro, o manual Lowrance electronic 2000 deve conte:
- dados técnicos do dispositivo Lowrance electronic 2000
- nome do fabricante e ano de fabricação do dispositivo Lowrance electronic 2000
- instruções de utilização, regulação e manutenção do dispositivo Lowrance electronic 2000
- sinais de segurança e certificados que comprovam a conformidade com as normas pertinentes

Por que você não ler manuais?

Normalmente, isso é devido à falta de tempo e à certeza quanto à funcionalidade específica do dispositivo adquirido. Infelizmente, a mesma ligação e o arranque Lowrance electronic 2000 não são suficientes. O manual contém uma série de orientações sobre funcionalidades específicas, a segurança, os métodos de manutenção (mesmo sobre produtos que devem ser usados), possíveis defeitos Lowrance electronic 2000 e formas de resolver problemas comuns durante o uso. No final, no manual podemos encontrar as coordenadas do serviço Lowrance electronic na ausência da eficácia das soluções propostas. Atualmente, muito apreciados são manuais na forma de animações interessantes e vídeos de instrução que de uma forma melhor do que o o folheto falam ao usuário. Este tipo de manual é a chance que o usuário percorrer todo o vídeo instrutivo, sem ignorar especificações e descrições técnicas complicadas Lowrance electronic 2000, como para a versão papel.

Por que ler manuais?

Primeiro de tudo, contem a resposta sobre a construção, as possibilidades do dispositivo Lowrance electronic 2000, uso dos acessórios individuais e uma gama de informações para desfrutar plenamente todos os recursos e facilidades.

Após a compra bem sucedida de um equipamento / dispositivo, é bom ter um momento para se familiarizar com cada parte do manual Lowrance electronic 2000. Atualmente, são cuidadosamente preparados e traduzidos para sejam não só compreensíveis para os usuários, mas para cumprir a sua função básica de informação

Índice do manual

  • Página 1

    INST ALLA TION AND OPERA TION INSTRUCTIONS GlobalMap 2000 TM[...]

  • Página 2

    Cop yright © 1997, 1998 Lowr ance Electronics, Inc. All rights reser ved. GlobalMap 2000 ™ is a trademark of Lowrance Electronics Lowrance ® is a registered tr ademark of Lowrance Electronics W ARNING! USE THIS UNIT ONL Y AS AN AID T O NA VIGA TION. A CAREFUL NA VI- GA T OR NEVER RELIES ON ONL Y ONE METHOD T O OBT AIN POSI- TION INFORMA TION. N[...]

  • Página 3

    1 INTRODUCTION ......................................................................................................... 2 INSTALLATION .......................................................................................................... 2 BRACKET MOUNT ...........................................................................................[...]

  • Página 4

    2 DATUMS ............................................................................................................ 62 PCF (Position Correction Factor) ................................................................ 64 POSITION FILTER .............................................................................................. 65 GPS SIMULATOR [...]

  • Página 5

    3 The smallest hole that will pass the power plug is one inch. After the hole is drilled, pass the other cables up through the hole first, then pass the power cable down through it. After the cables have been routed, fill the hole with a good marine sealing compound. Offset the bracket to cover the hole. Route the cables through the slot in the bac[...]

  • Página 6

    4 RUBBER PAD BOLT CAM CLAMP (TURNED DOWN) CAM CLAMP (TURNED UP) BOLT RUBBER PAD LOWRANCE clamp on the right side of the unit is pointing up before you start tightening the bolts. POWER CONNECTIONS This product works from a twelve-volt battery system. For the best results, attach the power cable directly to the battery. You can attach the power cabl[...]

  • Página 7

    5 The wiring connections for the NMEA 0183 version 1.5 are different than the ones used for the NMEA 0183 version 2.0. If you are using version 1.5, then use the shielded green and red wires on the mapping unit’s NMEA cable. If you are using version 2.0, then you’ll be using all four shielded wires on the NMEA cable. If you’re using a Lowranc[...]

  • Página 8

    6 Lowrance Accessory Wiring Diagrams Since there are many different combinations of accessories that are used with the GlobalMap 2000, the drawings on the next four pages can help with the installation. (Note: The black connector on the GlobalMap 2000 is covered by a black plastic cap. Carefully pry this cap off to gain access to the connector.) Th[...]

  • Página 9

    7 LOWRANCE LO WRANCE GPS MODULE LO WRANCE DGPS BEA CON RECEIVER SAM-ST MAPLINK SAM-50HPD DGPS DU AL FREQUENCY INTERF ACE GLOBALMAP 2000 TO 12 VDC T O 12 VDC TO 12 VDC T O 192 KHZ TRANSDUCER TO 50 KHZ TRANSDUCER TO SPEED/TEMP SENSOR T O 12 VDC WHITE GREEN BLUE BRO WN WHITE GREEN RED BLACK[...]

  • Página 10

    8 LOWRANCE LO WRANCE GPS MODULE DGPS BEA CON RECEIVER MAPLINK GLOBALMAP 2000 TO 12 VDC TO 12 VDC WHITE GREEN WHITE RED BLACK GREEN RED BLACK PO WER CABLE[...]

  • Página 11

    9 LOWRANCE LO WRANCE GPS MODULE SAM-ST MAPLINK GLOBALMAP 2000 TO 12 VDC T O 192 KHZ TRANSDUCER TO SPEED/TEMP SENSOR TO 12 VDC[...]

  • Página 12

    10 NMEA 0183, VERSION 1.5 WIRING CONNECTIONS The shielded red and green wires are for a NMEA 0183, version 1.5 interface. The GlobalMap 2000 sends data to other electronic navigation devices through the green wire and receives NMEA data through the red wire. If the red and green wires are not used, tape their ends so that they cannot short. To conn[...]

  • Página 13

    11 GLOBALMAP 2000 NMEA CABLE NMEA 0183, VERSION 1.5 WIRING CONNECTIONS 12 VOLT BATTERY BLACK WIRE GLOBALMAP 2000 POWER CABLE GLOBALMAP 2000 RECEIVING NMEA 0183 VERSION 1.5 DATA FROM ANOTHER DEVICE OTHER DEVICE'S NMEA 0183, VERSION 1.5 OUTPUT CABLE GREEN WIRE GLOBALMAP 2000 NMEA CABLE OTHER DEVICE'S NMEA 0183, VERSION 1.5 INPUT CABLE 12 VO[...]

  • Página 14

    12 NMEA 0183, VERSION 2.0 WIRING CONNECTIONS RECEIVE WIRES OTHER DEVICE'S NMEA INPUT BLACK (+) RED (-) WHITE (+) GLOBALMAP 2000 RECEIVE NMEA 0183 VERSION 2.0 ONLY TRANSMIT WIRES OTHER DEVICE'S NMEA OUTPUT GLOBALMAP 2000 SEND NMEA 0183 VERSION 2.0 DATA ONLY GLOBALMAP 2000 NMEA CABLE GLOBALMAP 2000 NMEA CABLE OTHER DEVICE RECEIVE WIRES TRAN[...]

  • Página 15

    13 Connecting a LMS-350/350A to the GlobalMap 2000 To connect a Lowrance LMS-350 or LMS-350A with a GPS module to the GlobalMap 2000, first follow the wiring diagram at the bottom of this page. After all wiring is completed, plug the two units in and turn them on. On the LMS-350, then press the GPS key, then the MENU key. Now press the key next to [...]

  • Página 16

    14 GLOBALMAP 2000 POWER CABLE GREEN WIRE BLACK WIRE WHITE WIRE 12 VOLT BATTERY DGPS RECEIVER OUTPUT DGPS RECEIVER INPUT (IF NEEDED) DGPS RECEIVER'S NMEA 0183 CABLE GLOBALMAP 2000 DGPS RECEIVER CONNECTIONS DGPS BEACON RECEIVER CONNECTIONS If a Lowrance GPS module is connected to the GlobalMap 2000, any brand of differential (DGPS) beacon receiv[...]

  • Página 17

    15 The LOWRANCE LGC-1 GPS MODULE This GPS receiver is small, rugged, and fast. The five channel design lets it track all satellites in view and acquire up to five satellites at one time. It sends position information once every second. By incorporating Rockwell’s GPS receiver technology with Lowrance’s state-of-the-art design and manufacturing [...]

  • Página 18

    16 Surface Mounting - Without Access If you don’t have access to the back side of the mounting surface, use the “cleats” supplied with the GlobalMap 2000. (Note: This is assuming you can “snake” the module’s cable to a location that is accessible. A hole will still need to be drilled in the mounting surface for the cable.) Using the gas[...]

  • Página 19

    17 Pole Mount First, thread the pole mounting adapter onto the mounting pole or ratchet base. Align the pole mounting adapter so the module will face the bow of the boat. Install and tighten the set screw into the pole mounting adapter and tighten it securely. This should prevent the GPS module from unscrewing from the pole. Place the gasket onto t[...]

  • Página 20

    18 SAM SONAR ACCESS MODULE In order for the GlobalMap 2000 to show sonar data, a sonar access module (SAM) and transducer must be installed. Follow the installation instructions included with the sonar access module. Route the cable from the sonar module to the black connector on the GlobalMap 2000. (Note: The black sonar connector on the GlobalMap[...]

  • Página 21

    19 KEYBOARD The keyboard has keys arranged in a vertical column on the left, plus a horizontal row at the bottom. A ten-key pad and arrow keys on the right side of the screen let you enter and change data on the screen. The menu key in the bottom left corner of the keyboard activates the first menu page. The keys along the bottom of the screen are [...]

  • Página 22

    20 LOWRANCE 789 456 0 OFF ON MAP NAV STEER SONAR MAN OVERBOARD EVENT MARKER ZOOM OUT ZOOM IN MENU CENTER CURSOR WAYPT WAYPT/ROUTE LIGHT 2000 2000 2000 2000 2000 CLR ENT 123 STEER - Press this key to show the Steering Screen. SONAR - This key switches the unit to the sonar displays. ZOOM IN - Expand the map to see more detail by pressing this key. Z[...]

  • Página 23

    21 CLR - This key clears menus and erases entries from the screen. ENT - This key is used to enter numbers and make selections. ON - The ON key turns the GlobalMap 2000 on. Pressing this key after turning the unit on also turns the display and keyboard’s lights on. OFF - Press and HOLD the OFF key to turn the mapping unit off. Interface Test You [...]

  • Página 24

    22 GETTING STARTED - INITIALIZATION AND I/O Once all power and data connections have been made, the next step is to turn the GlobalMap 2000 on. A message appears on the screen. Press the CLR key to erase this message. If a Lowrance GPS module is connected, then the mapping unit sends a “cold-start” message to the module. The module will then st[...]

  • Página 25

    23 The unit usually only takes a few minutes or less to find the satellites once it’s been initialized by the user. To initialize the GPS module, first press the MENU key. Now press the key next to the “GPS / DGPS Setup” label. The screen at right appears. Finally, press the key next to the “Initial Time and Position” label. The screen sh[...]

  • Página 26

    24 Continue entering your altitude, present time and date the same way you entered your present position. If you make a mistake entering a number, use the arrow keys to move back to the number that you wish to change, then enter the correct number. When all of the numbers on the screen are correct, press the “ENT” key. This sends the values you[...]

  • Página 27

    25 GPS RECEIVER TEST If you have a GPS module connected to the GlobalMap 2000, a test can be performed on the receiver inside the module. This tests many param- eters of the receiver, letting you know if there is a malfunction. If the GPS module fails any of the tests on the shown on the screen, then contact the Lowrance Factory Customer Service De[...]

  • Página 28

    26 RTCM 104 The GlobalMap 2000 can “talk” to the beacon receiver using RTCM104, a standard commu- nications language. With this protocol, all you need to do is set the baud rate to the same as the one used by your beacon receiver. The unit’s default is 4800 baud. If your unit uses a different baud rate, press the key next to the “Serial Com[...]

  • Página 29

    27 should start using the data from the differential beacon receiver. See the “DGPS Beacon Receiver Status” section for more information. GPS/DGPS INFORMATION SCREENS Note: These screens will have only partial or no data if the GlobalMap 2000 is receiving its data from another navigation receiver through the NMEA 0183 input. You must have a Low[...]

  • Página 30

    28 how strong the satellite’s signal is. The higher the SNR number, the better. To exit this screen, press the MAP, NAV, STEER, or SONAR keys. DGPS BEACON RECEIVER STATUS With both a Lowrance GPS module and a DGPS beacon receiver con- nected to the GlobalMap 2000, then DGPS receiver status shows on the status screen. Again, to view this screen, p[...]

  • Página 31

    29 IMPORTANT! If the data shown in digital numbers on any screen on this unit is flashing, then it means that data is invalid. Do not rely on data that is flashing! For example, if the present position display is flashing, then the unit has lost the position data from the GPS module or NMEA 0183 data input. The position that is flashing is the last[...]

  • Página 32

    30 pear. Press the MAP key again to view a “split-screen” map and sonar display as shown below. Pressing the MAP key again returns the unit to the original mapping display. Boxes on the right side of the screen shown at the bottom of this page show your course over ground (COG), or direction you’re heading, boat speed (SOG), present time (TOD[...]

  • Página 33

    31 If you move to the left or right of the optimum course to the waypoint, another arrow appears on the display with the letters “WYPT”. This arrow points in the direction you should steer the boat to get back on course. In the example shown above, you need to steer the boat to the left to get back on course. The box shown beneath the compass b[...]

  • Página 34

    32 MAPPING OPTIONS The map screen has a number of choices available that let you optimize this screen for your own particular boating or navigation situations. To change the mapping display, first press the MENU key, then press the key next to the “Mapping Setup...” label. The screen shown below appears. North Up - Course Up - Center This mappi[...]

  • Página 35

    33 The “Center” mode (shown be- low right) keeps your present position in the center of the map- ping display. The map is always in the “north-up” mode and scrolls around your present po- sition as you travel. This mode is similar to the north-up mode, it just moves the map instead of your present position. Using this method always makes it[...]

  • Página 36

    34 LOWRANCE BACKGROUND MAP C-MAP™ BACKGROUND MAP “Area Fill” label to move the check mark from “Water” to “Land”. Now press the CLR key. The unit returns to the map screen with the land filled with gray. Cartridge Switch The mapping unit can use either Lowrance IMS or C-MAP™ cartridges. If you wish to use the C-MAP cartridge, you’[...]

  • Página 37

    35 To switch back to the Lowrance map, repeat the previous steps. Switching to the “Off” box in this menu switches all maps off, turning the display into a plotter-only mode. C-MAP Setup There are several options avail- able to you if you’re using the C- MAP system. C-MAP gives you the capability to turn off or on the map boundaries, naviga- [...]

  • Página 38

    36 Plotter Trail time to move the cursor lines diagonally. In the screen shown on the previous page, the cursor lines are 1.08 miles and 149 degrees from the present position. Note: The cursor is not available when the map is in the “course up” mode. If you press the CENTER key while the cursor lines are displayed, the unit will center the map [...]

  • Página 39

    37 seven menu selections on this screen, all of which relate to the trail plotter. After you’ve made a selection on this screen, press the CLR key to exit. Clear Trail The first item at the top of the screen is “Clear Trail.” This erases the plot trail from the screen. This is only temporary, the GlobalMap 2000 will con- tinue to draw your tr[...]

  • Página 40

    38 Plot Trail - Time Interval If you wish to update the plot trail based on time instead of distance, press the key next to the “Record by” label to move the check mark from “Dist.” (distance) to “Time”. The default time update is one second. A dot on the trail is placed once every second, regardless of distance travelled. This update t[...]

  • Página 41

    39 Note: When you place an event marker, first make certain the event markers are on. When the mapping unit is first turned on or after a preset, the markers are automatically turned on. However, if you turn the them off (using the “Event Markers On/Off” label on the first “Mapping Setup” menu screen), then the markers won’t show when you[...]

  • Página 42

    40 screen. The event marker labels automatically clear from the screen. Press the CURSOR key to erase the cursor lines. To erase all of the event mark- ers from the screen, first move the cursor to the area that has the event markers that you wish to erase. Of course, if the event markers are in the area of your present position, then you don’t n[...]

  • Página 43

    41 minute. For example, on this page, the present position is 25 degrees, 44.324 minutes latitude and 80 degrees, 08.119 minutes longitude. Please note that you must re- call a waypoint to use the Bear- ing, Distance To Go, and Ve- locity Made Good displays. See the Waypoint Navigation sec- tion for information on recalling a waypoint. For example,[...]

  • Página 44

    42 digital boxes on this screen are customizable. Press the STEER key to view this screen. Your present position is shown by the arrow. The arrow shows the direction the boat is head- ing relative to the waypoint. In theory, if you steer the boat with the arrow always pointing to- wards the waypoint, then you will arrive at the waypoint. The solid [...]

  • Página 45

    43 A faster way to change the C.D.I. range is to simply press the ZOOM IN o ZOOM OUT keys while the steer screen is displayed. Each time you press one of these keys, the C.D.I. range increases or decreases, depending on which key you press. To clear the plot trail on the steering screen, simply press the CLR key. Pressing the STEER key at the botto[...]

  • Página 46

    44 There are four pages of differ- ent digital boxes to choose from. Pressing the MENU key changes to the next page.) Once the arrow is pointing to the desired box, press the ENT key. This returns the unit to the screen you’re changing (in this example, it’s the navigation screen), and places the new box on the screen as shown above right. Comp[...]

  • Página 47

    45 WAYPOINT NAVIGATION HOW TO SAVE A WAYPOINT Waypoints are locations on the earth’s surface that you wish to go or return to. Waypoints are useful for marking shipwrecks, hot fishing spots, buoys, and other fishing or navigation locations. Storing waypoints makes it easy to return to any point in the world by simply pressing a few buttons. The G[...]

  • Página 48

    46 waypoint says “Empty”, then you can store a position there. A row of menu labels appear on the left side of the screen. Press- ing a key next to these labels let you save your present position, the cursor position, select a waypoint destination, edit the waypoint elements, and erase a waypoint from the list. The steps required to save a way-[...]

  • Página 49

    47 Waypoint Symbols If you want a symbol placed on the map, press the down arrow key to the “Symbol” location on the waypoint screen. The let- ters on the left side of the screen disappear and symbols appear in the labels. (See below) Press the key next to the desired sym- bol to assign it to the waypoint number shown at the top of the screen. [...]

  • Página 50

    48 to the waypoint, the symbol will show on the screen instead of the box. Navigate to a Waypoint To show navigation data to a waypoint location, first press the WAYPT/ROUTE key, then press the key next to the “Way- points” label. The screen shown below appears. Select the way- point by pressing the up or down arrow keys until the desired waypo[...]

  • Página 51

    49 Erase a Waypoint To delete a waypoint from the waypoint list, first press the WAYPT/ROUTE key, then press the key next to the “Way- points” label. The screen shown at right appears. Now move the black box to the waypoint that you wish to erase using the arrow keys. Now simply press the key next to the “Erase Waypt” label. A message ap- p[...]

  • Página 52

    50 sequences to the next waypoint. Navigation information is shown to this waypoint and the process repeats. When you reach the last waypoint in a route, the arrival alarm sounds until you turn it off. There are four steps required to create and follow a route. First, you must create and name the route. Next, select the waypoints used in the route.[...]

  • Página 53

    51 Waypoint Selection You’re now ready to place the waypoints into the route, using any of three different methods. You can place waypoints using the cursor on the map, from the list of waypoints, or enter the latitude/longitude of each way- point from the keyboard. IMPORTANT! You must select waypoints in the order they are to be used in the rout[...]

  • Página 54

    52 key again. A dashed line ex- tends from the first waypoint to the second, showing the first leg of the route. Continue mov- ing the cursor and saving way- points until all of the waypoints in the route have been selected. Press the CLR key when you’re finished. A screen similar to the one at right appears. The waypoints used in this route appe[...]

  • Página 55

    53 All of the waypoints (including their number, name, and sym- bol) can be viewed on the left side of the screen. The first nine are shown. To see more waypoints, simply press the down arrow key. The position of the highlighted waypoint is shown at the bottom of the screen. Bearing and distance from your present position to the waypoint are shown [...]

  • Página 56

    54 press the ENT key to save the waypoint and return to the route edit screen. Remove Waypoint To erase a waypoint from the list of waypoints used in a route, first recall the route by pressing the WAYPT/ROUTE key, then pressing the key next to the “Routes” label. Use the arrow keys to highlight the route you want to change. Now press the key n[...]

  • Página 57

    55 Erase Route To erase a route from the list, first press the WAYPT/ROUTE key, then press the key next to the “Routes” label. Use the ar- row keys to highlight the route you want to remove from the list as shown at right. Now press the key next to the “Erase Route” label. A warning mes- sage appears, telling you this route will be permanen[...]

  • Página 58

    56 point number 3 first, then 6, and finally 2. If you travel backward through the route, the unit will start with waypoint number 2 first, then 6, and end with waypoint number 3. No matter if you travel forward or reverse through the route, when you reach the last waypoint in the route, the arrival alarm sounds until you turn it off. After you dec[...]

  • Página 59

    57 WAYPT/ROUTE key, then the key next to the “Routes” label. Finally, press the key next to the “Setup...” label. The auto-sequencing menu shown at the top of the previous page appears. NAVIGATION ALARMS The GlobalMap 2000 has four alarms. One is an arrival alarm that sounds when you come within a preset distance to a waypoint. Another is a[...]

  • Página 60

    58 CROSS TRACK ALARM ARRIVAL ALARM mile of a recalled waypoint if the arrival alarm’s setting is .1 mile. We’ve drawn the imagi- nary arrival alarm radius on the screen at right. As you can see, the present position symbol hasn’t reached the circle. When it does, the arrival alarm will sound. The alarm is adjustable from .010 to 9.99 miles. X[...]

  • Página 61

    59 PERPENDICULAR ALARM The perpendicular alarm sounds when your course is even with a waypoint and is starting to pass it. The perpen- dicular alarm has no adjust- ment. It doesn’t care how far from a recalled waypoint you are; it sounds only when you’re passing the recalled waypoint. For example, on the map above, the waypoint is perpendicular[...]

  • Página 62

    60 The GlobalMap 2000 can display navigation information in magnetic or true. When it’s turned on for the first time true is used. Press the key next to the “Direction” label to switch it to magnetic. Speed can show in knots (KN), statute miles per hour (M.P.H.), or kilometers per hour (K.P.H.). The default setting for speed is statute miles [...]

  • Página 63

    61 Overboard Location”. A screen similar to the one at right ap- pears. Your position at the time you pressed the Man Over- board key is shown by a box with the letters “MOB” inside. All digital navigation displays including Distance (DTG), Bear- ing (BRG), Course (COG), Speed Over Ground (SOG), and Time To Go (TTG) show data that let you nav[...]

  • Página 64

    62 key, press the key next to the “Reset Man Overboard” label on the menu shown above. The GlobalMap 2000 doesn’t save the Man Overboard position in the waypoint table. However, it does save the position on the Man Overboard Information screen. To add the position shown at the top of Man Overboard Information menu to the waypoint table, simpl[...]

  • Página 65

    63 To reduce the error factor between datum, this unit gives you the capability to select the datum used by the unit when displaying the map. You can select a new datum from a list or enter a correction offset based on latitude/ longitude. To change the datum, first press the MENU key three times. Now press the key next to the “Datum Translations[...]

  • Página 66

    64 PCF (Position Correction Factor) Another method used to reduce the error factor between datum is called PCF, or Position Correction Factor. This unit gives you the capability to move or “offset” the position shown on the display to match the one on the chart. The unit will add this offset or PCF to all position displays at all times. Remembe[...]

  • Página 67

    65 on. To leave this screen, press the CLR key. This also puts your changes into effect. To turn these changes off, return to this screen and press the key next to the “PCF Mode ON OFF” label. Remember, presetting the unit also erases any PCF offset, thereby turning it off. POSITION FILTER No matter what kind of radio navigation input you’re [...]

  • Página 68

    66 PRESET The preset feature returns all of the GlobalMap’s settings to their original factory settings for both GPS and sonar. This resets the units of measure, speaker vol- ume, display contrast, and more. However, this doesn’t erase any event markers, way- points or routes. To preset the unit, press the MENU key three times. The screen shown[...]

  • Página 69

    67 MAP CARTRIDGE BOUNDARY (Note: This only works on the speed sensor connected to the sonar module. You cannot calibrate the speed from the GPS module or NMEA which is displayed in the “SOG” window. To reset the distance log to zero, simply press the key next to the “Reset Dist. Log” label. The current distance log is shown to the right of [...]

  • Página 70

    68 GLOB ALMAP 2000™ SONAR OPERA TION Notes: 1. Sonar operation requires the installation of an optional SAM Sonar Access Module. 2. The sonar module’s frequency now shows at the bottom of the sonar screen. (50 kHz or 192 kHz) This was a late change, so the illustrations in this manual do not show the frequency on the sonar screens. SONAR TABLE [...]

  • Página 71

    69 SONAR OPERATION - General To view the sonar data, press the SONAR key at the bottom of the unit. A screen similar to the one below appears. This is a full-screen sonar display. The sonar data scrolls from right to left. The unit is in the auto- matic mode, shown at the top of the screen by the word “AUTO”. The automatic feature keeps the bot[...]

  • Página 72

    70 The SONAR key allows quick changes between sonar screens, each of which can be customized to your needs. AUTOMATIC The automatic feature is enabled when the unit is first turned on. This feature adjusts the sensitivity and range so the bottom signal shows in the bottom half of the display at all times. The word “AUTO” appears at the top of t[...]

  • Página 73

    71 currently in use. Continue pressing the arrow keys until you reach the desired level. If the unit is in the automatic mode, the sensitivity level can’t be in- creased or decreased past a certain point. An easy way to adjust the sen- sitivity in the manual mode is to first change the range to a depth that’s at least twice as deep as the curre[...]

  • Página 74

    72 To change the range, simply press the up arrow key to decrease it or the down arrow key to increase it. If the unit is in automatic, it may change the range immediately to keep the bottom on the screen. Another way to adjust the range is through the menus. Press the MENU key, then press the key adjacent to the “Sonar Con- trols ...” menu. A [...]

  • Página 75

    73 To change the upper limit, press the key adjacent to the “Upper Limit” label. A screen similar to the one at right appears. Using the numbered keys, enter the desired upper limit, then press the ENT key. In this example, we entered 25 feet. The GlobalMap 2000 returns to the sonar menu using the new range as shown below. Changing the lower li[...]

  • Página 76

    74 For a full screen zoom view, simply press the SONAR key until the full screen zoom ap- pears. Since the unit is in the automatic mode, the GlobalMap 2000 keeps the bottom signal on the screen at all times, automatically adjust- ing the range. Manual If you’re in the manual mode, pressing the SONAR key gives you a 2X zoom, identical to the one [...]

  • Página 77

    75 ZOOM BAR After pressing the CLR key in the above procedure, the zoom bar disappears. If you wish to leave the zoom bar on the dis- play at all times, press the MENU key, then press the key next to the “Sonar Controls” label. Now press the key next to the “More” label until the “Zoom Bar” label appears. Press the key next to that labe[...]

  • Página 78

    76 The microcomputer is sophisti- cated, but it can be fooled. It can’t distinguish between fish and other suspended objects such as trotlines, turtles, sub- merged floats, air bubbles, etc. Individual tree limbs extending outwards are very hard for the unit to distinguish from fish. You may see fish symbols on the screen when there actually are [...]

  • Página 79

    77 FASTRACK The FasTrack feature converts all echoes to short horizontal lines on the right side of the display. The graph continues to operate normally. FasTrack looks similar to a flasher, mak- ing it useful for fishing at an- chor. Since the unit isn’t mov- ing, fish signals are long lines on a normal chart display. FasTrack converts the graph[...]

  • Página 80

    78 To adjust the Grayline level, press the MENU key, then press the key next to the “So- nar Controls” label. Now press the key adjacent to the “More” label until the “Grayline” menu appears as shown at right. Press the key next to the right arrow in the Grayline menu to increase it. Press the key adja- cent to the left arrow in the men[...]

  • Página 81

    79 Depth Alarms The depth alarms sound a tone when the bottom signal goes shallower than the shallow alarm’s setting or deeper than the deep alarm’s setting. For example, if you set the shallow alarm to ten feet, the alarm will sound a tone if the bottom sig- nal is less than ten feet. It will continue to sound until you mute it or when the bot[...]

  • Página 82

    80 Zone Alarm The zone alarm consists of a bar that appears on the right side of the display during the adjustment. You can also turn the zone alarm bar on continuously. Any echo that passes between the top and bottom of the zone alarm’s bar trips the zone alarm, even if the zone alarm bar is not displayed. To adjust the zone alarm, press the key[...]

  • Página 83

    81 ASP and Surface Clarity Control Noise, in electronic terms, is any undesired signal. Noise shows on the display as random patterns of dots or lines. In severe cases, it can completely cover the screen with black dots or lines, obscuring target and bottom echoes. It’s caused by mechanical and electrical sources such as bilge pumps, engine ignit[...]

  • Página 84

    82 decrease it. The bar graph and percentage number shows the level of surface clarity in use. Press the CLR key when you’re finished. DIGITAL SONAR Each SAM actually has two sonar units in one box. One sonar is dedicated to the graph display, the other is the digital sonar display. The digital sonar is responsible for the digital depth display a[...]

  • Página 85

    83 feet, if the transducer is mounted three feet below the surface.) The difference be- tween the depth sounder’s reading (47 feet) and the ac- tual water depth (50 feet) is called the keel offset. In this example, to make the digital sonar read the correct depth, you would use a positive keel offset of three feet. Another time you may wish to ch[...]

  • Página 86

    84 Zone and Zoom Bars: ...................................................... Off Keel Offset ....................................................................... Off FasTrack: ........................................................................ Off Surface Clarity: ................................................................ 18% Graylin[...]

  • Página 87

    85 LOWRANCE ELECTRONICS FULL ONE-YEAR WARRANTY “We", “our”, or “us” refers to LOWRANCE ELECTRONICS, INC., the manufacturer of this product. “You” or “your” refers to the first person who purchases this product as a consumer item for personal, family, or household use. We warrant this product against defects or malfunctions in[...]

  • Página 88

    86 D A T ABASES LICENSE A GREEMENT THIS IS A LEGAL A GREEMENT BETWEEN THE END-USER WHO FIRST PUR- CHASES THIS PR ODUCT AS A CONSUMER ITEM FOR PERSONAL, F AMIL Y , OR HOUSEHOLD USE (“Y OU”) AND LO WRANCE ELECTRONICS (“WE”, “OUR”, OR “US”). USING THE PR ODUCT ACCOMP ANIED BY THIS LICENSE A GREEMENT CONSTITUTES ACCEPT ANCE OF THESE TER[...]

  • Página 89

    87 D A T ABASES LIMITED W ARRANTY “W e”, “our”, or “us” refers to Lowr ance Electronics Inc., the manufacturer of this product. “Y ou” or “your” ref ers to the first person who purchases the product as a consumer item fo r personal, f amily , or household use. The Databases Limited W arranty applies to the one or more databases [...]

  • Página 90

    88 Lowrance's UPS Return Service Lowrance Electronics and United Parcel Service (UPS) are proud to offer all of our customers free shipping for all units sent to us for repair or service. If you have to send this unit to the factory, and you are in the continental United States, use the enclosed UPS shipping label for easy, free shipping to ou[...]

  • Página 91

    89 This UPS shipping offer is good only in the continental United States (excludes Alaska and Hawaii). KEEP THIS LABEL! YOU WILL NEED IT IF YOU EVER NEED TO RETURN YOUR UNIT TO THE FACTORY FOR REPAIR. Accessory Ordering Information To order accessories such as power cables or transducers, please contact: 1) Your local marine dealer. Most quality de[...]

  • Página 92

    90 Ho w to Obtain Ser vice - U.S.A. Only W e back y our inv estment in quality products with quick, e xper t ser vice and genuine Lo wrance ® replacement par ts. If y ou're in the United States and you ha ve questions , please contact the F actor y Customer Service Depar tment using our toll-free n umber listed below . Y ou must send the unit[...]