LG Electronics W3000H manual

M ake sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. S ee the label attached on the product and give the information to your dealer when you ask for service. W3000H User ’ s Guide[...]

A1 This unit has been engineered and manufactur ed to ensure your personal safety , however improper use may r esult in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display , observe the following basic rules for its installation, use, and servicing. On Safety Use only the[...]

A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventil[...]

A3 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand base or Removing the stand base 1 . Place the monitor with its front facing downward on a cushion or soft cloth. 2 . Align the hooks on the Stand Body with the matching sl[...]

A4 Connecting the Display Important This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. 4. Attach the monitor to the Stand Base by turning the screw to the ri[...]

100.0mm A5 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~20˚ Swivel Range : 350˚ Ergonomic You do not need to replace the L[...]

A6 Connecting the Display Using the Computer 1. First, make sure that the power on the PC, monitor and peripheral equipment are off and then, connect as follows. 2. Connect DVI-D signal cable . When attached, tighten the thumbscrews to secure the connection. 3. Insert the power cord into the outlet. Wall-outlet type Power Cord 1 2 4. Touch the powe[...]

Connecting the Display A7 Connecting the USB(Universal Serial Bus) Cable 1. Connect the upstream port of the display to the downstream port of the USB compliant PC or another hub using the USB cable. (Computer must have a USB port) 2. Connect the USB compliant peripherals to the downstream ports of the display. NOTE To activate the USB hub function[...]

A8 Connecting the Display T o arrange the cables Connect the power cord and the signal cable as shown in the figure and then fix them to the cable holders 1 and 2. Cable Holder 1 1. Please insert the cable holder1 into a hole. 2. Please put the power cord and the signal cable in the cable holder 1. 3. Please put the power cord and the signal cable [...]

A9 Touching the button to turn the power on and touch the button again to turn it off. Power Button Control Panel Functions Front Panel Controls 4 5 This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber. Power Indicator Buttons You can adjust[...]

A10 T roubleshooting No image appears Check the following before calling for service. No image appears ● Is the power cord of the display connected? ● Is the power on and the power indicator blue or green? ● Is the power indicator amber? • Check and see if the power cord is connected properly to the power outlet. • Adjust the brightness a[...]

A11 Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web s[...]

A12 Specifications Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input Environmental Conditions 30 inches (75.6228cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 30 inches viewable 0.2505 mm pixel pitch Horizontal Freq. 98.71kHz (Automatic) Vertical Freq. 59.97 Hz (Automati[...]

A13 Specifications NOTE Information in this document is subject to change without notice. Attached ( ), Detached ( O ) Wall-outlet type or PC-outlet type Standard USB 2.0, Self-Power Data Rate Max 480 Mbps Power Consumption Max 2.5W x 4 Stand Base Power cord USB[...]

A14 Specifications Preset Modes (Resolution) *Recommend Mode Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 *2 1280 x 800 2560 x 1600 49.310 98.713 60 60 Indicator On Mode Sleep Mode Off Mode Blue Amber Off LED Color MODE[...]

A15 Installing the W all mount plate This monitor satisfies the specifications of the W all mount plate or the interchange device. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is pur[...]

Digitally yours[...]