JVC VN-T216VPRU manual

VN - T216 VPR U FIXED H D IP DOME CAMERA Q UICK G UIDE[...]

1 Contents 1 Introduction .......................................................................................................................... 2 Unpack Everything ................................................................................................................. 2 Preparation .....................................................[...]

2 1 Introduction Thank you for purchasing the camera. Before installing it, read the guide carefully and check the model. For more information, please refer to the INSTRUCTIONS on CD - ROM . Unpack Everything Ÿ FIXED HD IP DOME CAMERA Ÿ WARRANTY CARD Ÿ SAFETY PRECAUTIONS Ÿ QUICK GUIDE Ÿ 2 - PIN TERMINAL BLOCK for power input, and 8 - PIN TERMI[...]

3 Disassembling the C amera • Gently remove the screw to take off camera housing (4). • Set the cam era housing (5) and liner aside. Connecting the W iring Connect the power supply cable to the power connectors. Select one of the following options. Ÿ Inset power cable f or AC 24V Connec t 24 V (~ ) cable s t o terminal s ~AC24V. Ÿ PoE Connect[...]

4 Ÿ Connect the wiring then place the camera to a proper position by pushing the button. Washer (for Wire) Scre w (for Wire) Saf e ty Wire (F all Prevention Wire , not supplied)[...]

5 Adjusting the C amera P osition The dome camera has three axes for positioning the camera. W hil e monitoring th e pictur e on th e monitor , adjus t th e c amer a positio n a s follows: • Pan Adjustment (A) For Wall Mount and Tilted Ceilings Rotate the lens base (maximum360 ° ) until you are satisfied with the field of view. • Horizontal Ro[...]

6 Mounting the C amera Ÿ Place the guide pattern sticker (supplied) on the mounting surface and mark three holes accordin g to the guide pattern sticker. Then fasten the sticker to the mounting surface with screws. Ÿ Connect the Safety Wire ( Fall Prevention Wire , not supplied) to the camera and the ceiling . Ÿ Secure the camera bottom case (1)[...]

7 l 4S Electrica l junction box(Optional) 1. Secure the mounting kit (optional) to 4S Electrical box using 2 appropriate screws. 2. Then secure the camera case to mounting kit using 2 appropriate screws. 3. Tuck the cables in the 4S Electrical box. 4. Adjust the view angle (zoom, focu s, and Horizontal Rotation). 5. Attach the camera housing. 6. Tu[...]

8 Locking the C amera • Use soft, lint - free cloth to wipe the dome cover clean and remove fingerprints. • Attach the inner liner and camera housing. • Turn the power on after you have installed the camera. Network Configuration : Setting Network Camera Environment Setting IP This is a network - based camera and must be assigned an IP addres[...]

9 • In Internet Explorer, click Internet Options on the Tools menu. • On the Privacy tab, move the setting s slider to Low or Accept All Cookies . • Click OK . b. When a proxy server is used, click Internet Options on the Tools menu of Internet Explorer, select Connect tab, click LAN button, and set proxy server. c. Change Security in Interne[...]

10 【 Automatic prompting for ActiveX controls 】 è Enable 【 Run ActiveX controls and plug - ins 】 è Enable 【 Script ActiveX controls marked safe for scripting* 】 è Enable • Press OK to save the settings. Close all Internet Explorer w indows and start a new window. This will allow the new settings to take effect. 6. Type your setting[...]

11 Using “IP Finder” to Search Camera ’ s IP Address The IP Finder is a tool which helps users to find VN - T16/216 series network cameras in the LAN which your computer is connected . Pl ease note that IP Finder is only compatible with Windows 7, windows Vista and Windows XP. 1. Insert the CD - ROM in the CD - ROM drive. 2. Copy the IP F ind[...]

12 2 Notice of Use • This manual is designed for administrators and users of the network camera. Please read it carefully before use. Al l requirements should be followed before using this camera. • Keep this document for future reference. • Please make sure the power source is AC 24V / PoE. Only connect the camera to this power system. • T[...]

13 3 Warnings Installation and maintenance should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty. DANGER! AC 24V models require the use of CSA Certified/UL Listed Class 2 power adapters to ensure compliance with electrical safety standards. Power over Ethernet (PoE) should meet[...]

14 5 S pecification s Operational Specifications Image device 1/2.7 - type Mega - pixel CMOS sensor Sensitivity Color:0. 6 lx , B/W: 0 lx (50 % ) D ay /N ight True D/N IR - LED Yes (IR Distance 15m) Auto Gain Control Off/On, selectable White Balance ATW (2800K ∼ 8500K) and Manual Electric Shutter PAL:1/25~1/10000 sec NTSC: 1/30~1/10000 sec Noise [...]

15 Resolution NTSC: 1080P(1920 x 1080), 720P(1280 x 720), D1(720 x 480), 4CIF(704 x 480), VGA(640 x 480), CIF(352 x 240) , QVGA(320 x 240) PAL: 1080 P(1920 x 1080), 720P(1280 x 720), D1(720 x 576), 4CIF(704 x 576), VGA(640 x 480), CIF(352 x 288) , QVGA(320 x 240) Image Frame Rate PAL: Up to 25fps NTSC: Up to 30fps Security Multiple user access leve[...]

16 © 2012 JVC KENWOOD Corporation Weight 1360g Connectors Power Input: removable terminal block Network : RJ45 connector Audio In/out: removable terminal block Alarm In/out: removable terminal block Environmental Operating Temperature - 10°C to 50°C Operating Humidity 0% to 90% Storage Temperature - 20°C to 60°C[...]