Jura Capresso IMPRESSA E40 manual

IMPRESSA E40 IMPRESSA E60 IMPRESSA E65 Instructions for use 02/02 Art. Nr. 62902[...]

Jura Impressa E40/E60/E65 English ................................................................................................................ 6 – 19 = Note = Important = Tip Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.juraworld.com[...]

Fig. 1 Fig. 4 Fig. 7 Fig. 2 Fig. 5 Fig. 8 Fig. 3 Fig. 6 Fig. 9 1 2[...]

7 8 9 10 11 12 13 14 15 16 17 6 5 4 3 2 1 Operating elements Jura Impressa E40/E60/E65 1 Water quantity switch 2 Powder coffee selection switch 3 Coffee key for 2 cups 4 Maintenance key (for functions such as: rinsing, cleaning, de-scaling, filter) 5 Coffee key for 1 cup 6 ON/OFF switch 7 Display with symbols 8 Water tank with carrying handle 9 Hei[...]

5 Contents Jura Impressa E40/E60/E65 1. Description .................................................. page 6 1.1 The symbols mean .................................. page 6 2. Safety instructions ........................................ page 7 2.1 Warnings .............................................. page 7 2.2 Safety precautions ................[...]

6 Important information for the user Thank you for choosing this Jura product. Please study these instructions carefully before using your new machine for the first time and keep them in a safe place for easy reference in future. Should you require further information or should particular problems occur that are not dealt with in sufficient detail [...]

7 2. Safety instructions 2.1 Warnings  Children are unaware of the dangers that electrical machines can represent; for this reason, children should never be left unsuper- vised with electrical machines.  This machine should only be used by people who have read these instructions.  Never use a faulty machine or one with a damaged power cabl[...]

8 3.5 Adjusting the grinder You have the possibility of adjusting the grinder to the roast of your coffee. We recommend the following: for a light roast ➞ a finer adjustment for a dark roast ➞ a coarser adjustment  Open the cover of the bean container.  To adjust the grinding, turn the selector switch (Fig. 2) to the required position. ?[...]

9  Pull the plug and the feed wire out of the wire box on the back of the machine.  Put the plug in.  Do not switch the machine on.  Press the draw-off key for about 3 seconds. Now, the , ,, symbols light up.  Now select the corresponding level with the draw-off key and press the ON/OFF switch in order to save the setting. The symbol[...]

10 5. Rinsing the machine When the symbol lights up, a rinsing process is demanded.  Place an empty cup under the coffee-spout.  Press the rinsing maintenance key (4). The rinsing process is automatically ended. If the machine has been switched off and has already cooled down, the rinsing function will be demanded when the machine is switched[...]

11 If the draw-off key is pressed by mistake, the selection can be cancelled by pressing the draw-off key. Your machine rinses. After drawing off powder coffee, we recommend that you regularly clean the filler funnel with a clean bottle-cleaning brush. 8. Drawing off steam The steam can be used for heating liquids and also for frothing milk for cap[...]

12 11.4 Clean unit After 200 draw-offs or 160 rinses, the machine must be cleaned; the symbol flashing announces this. You can continue to draw off coffee or hot water/steam. We recommend carrying out the cleaning (as described in point 12) within the next few days. Warning lamp does not go out until the complete cleaning prozess has been carried o[...]

13  Switch the machine on with the ON/OFF switch.  Press the draw-off key for about 3 seconds. The degree of hardness set appears on the display.  Press the draw-off key until only the symbol is still alight.  Press the ON/OFF switch as a confirmation. The , symbols light up.  Place a sufficiently large vessel under the pivoting nozz[...]

14 11.11 Empty system This procedure is necessary in order to protect the machine from damage by frost in transport.  Switch the machine OFF with the ON/OFF switch.  Place a vessel under the pivoting nozzle for hot water/steam (13).  Turn the selector switch for hot water/steam (12) to position .  Switch your machine back on again with [...]

15 E  Empty the drip tray and the grounds container and put both of them back in. The symbol lights up. After each cleaning operation the filler funnel for the 2nd coffee type should be cleaned. 13. Descalcifying The machine has an integrated de-scaling programme. If you use a Claris filter cartridge, your machine does not need de-scaling. Only [...]

16  Turn the selector switch for hot water/steam (12) back to the position . The de-scaling process is continued and the water is guided into the drip tray in the interior of the machine.  If the symbol lights up, empty the drip tray and put it back in again. The symbol appear.  After this, press the maintenance key (4). Your machine rinse[...]

17 E 16. Messages Display Cause Action – System empty – Fill system (see point 4.1) – System too hot after drawing off steam – Reset to coffee stand-by – Wrong position of selector switch – Put selector switch into correct position – General troubles 1. – Switch off – disconnect from mains – connect to mains – switch machine o[...]

18 Display Cause Action – Drip tray not inserted properly or missing – Insert correctly – Cleaning necessary – Carry out cleaning process – De-scaling necessary – Carry out de-scaling process – Replacing of filter – Run program 17. Problems Problem Cause Action Coffee flow is stopped – bean container empty – Fill with beans afte[...]

19 E 18. Legal information These operating instructions contain the information necessary for the correct use, operation and maintenance of the machine. Understanding of and complying with the directions contained in these operating instructions are essential for use of the machine without risk and for safety in operation and maintenance. The opera[...]