IOGear wireless 1080p computer to hd display kit (mac) manual

www .iogear .com User Manual W ir eless 1080p Computer to HD Display Kit (Mac) GUWA VKIT4 P ART NO. M1227-Mac[...]

[...]

3 T able of Contents Introduction 4 Package Contents 4 Requirements 4 Specications 5 Overview 6 Software Installation - Mac 7 Hardwar e Installation 11 Using the IOGEAR Wireless Software - Mac 13 T roubleshooting and Support 19 Federal Communications Commission (FCC) Statement 24 CE Compliance 24 Limited W arranty 25 Contact 25[...]

4 Package Contents Requirements 1 x Wireless A / V Receiver 1 x Wireless USB T ransmitter 1 x Power Adapter 1 x User Manual 1 x W arranty/Registration Card 1 x Installation CD for PC MAC : • Intel i5 dual core 2.5GHz and above • Mac OS 10.7 Lion, 10.7.4 or earlier , MAC OS 10.8.2 Mountain Lion or later • Graphics Chipsets Supported: Intel and[...]

5 Specications Base Receiver • Video Out: HDMI Connector , VGA Connector • Audio Output: 3.5mm Stereo Jack • USB 2.0 port to support printers and external hard drives. • 32-bit T rue Color support with display resolution of up to 2048 x1152 (SXGA+) • Streaming video up to 1080p r esolution • Supports both Mirror Mode and Extended Mod[...]

6 Overview Receiver Base Front V iew 1. Power / Signal Indicator Light 2. W ireless Connection LED Light Receiver Base Back View 1. DC Power Input 2. HDMI Port 3. D-Sub 15Pin (VGA) 4. 3.5mm Audio Out 5. USB Port 6. Antenna PC Adapter 1. USB 2.0 1 1 1 2 3 4 6 5 2[...]

7 Software Installation - Mac Prior to installing the IOGEAR UWB Connection Manager software, it is important to make sure ther e is no prior installation of Wireless USB software from IOGEAR or other companies. IF YOU HA VE THIS SOFTWARE IN YOUR SYSTEM, THIS WILL CAUSE THE UWB CONNECTION MANAGER SOFTWARE TO NOT WORK PROPERL Y . Installation Steps:[...]

8 2. “Welcome to the IOGEAR Wireless USB Installer” window will appear and click Continue to go to the next screen 3. “Software License Agr eement” window will appear and click on Continue to go onto the next screen[...]

9 4. The License Agreement window will appear . Click “Read the License” to read a copy of the Agreement. Click on Disagr ee to exit the installation. Click on Agree to go to the next window . 5. The “Standard Install on “Macintosh HD” window will appear and Click on “Install”. 6. The Password window will appear . Enter your Name and [...]

10 7. The Computer Restart window will appear and click on “Continue Installation” 8. The computer will install the software and “The installation was successful” scr een will appear in the installation window . Click on Restart to restart your computer .[...]

11 3. Connecting a TV , Monitor or Projector 1. Y ou can connect a digital (HDMI) or analog (VGA) monitor to the Receiver Base. Only one monitor can be connected to the HD Adapter at a time. 2. Connect an HDMI or VGA Cable to the HDMI or VGA port on the Receiver Base 3. Connect the other end of the cable to the TV , Projector or external monitor . [...]

12 4. Connecting Audio Devices 1. The W ireless USB Device Adapter pr ovides one 3.5mm port, as shown in the illustration above. 5. Connecting USB Devices* 1. The Receiver Base provides one USB 2.0 port 2. Connection can be made to, Printers, External HDD’ s, IOGEAR wireless keyboar d etc. *Webcam’ s are not supported as they requir e throughpu[...]

13 This section provides information on using the following softwar e to manage the IOGEAR Wireless Softwar e for Mac to adjust settings to suit your needs: 1. UWB Connection Manager 2. Display Manager 3. IOGEAR Video Dock utility Y ou can also refer to this section to learn how to uninstall the software. 1. Introducing the UWB Connection Manger So[...]

14 2. The UWB Connection Manager drop down box appears. The IOGEAR Wireless Software rst appears on the UWB Connection Manager drop down box as Detected Devices. Simply double-click on the “Wireless device GUWA VKIT4” to establish a connection. It will take a few minutes for the Drivers to load upon rst connection. 3. When the wireless co[...]

15 4. Click on the UWB Connection Manager Icon and right-click on the “W ireless Device GUWA VKIT4” and select “Set as Default” if you would like the wireless device GUWA VKIT4 as your default wireless device. This will automatically connect the Wireless Device GUWA VKIT4 each time your Mac Adapter is plugged into your Mac. When the Wireles[...]

16 5. Disconnecting the IOGEAR Wireless Computer to HD Display Kit from your computer Y our computer can only be connected with one receiver base Mac at a time. If you have more than one r eceiver base within range of your computer , you may want to temporarily prevent your computer fr om connecting wirelessly to a particular IOGEAR W ireless Softw[...]

17 6. Renaming the Wireless Device Y our computer can only be connected with one IOGEAR W ireless Computer to HD Display Kit for Mac at a time. If you have more than one IOGEAR Wireless Computer to HD Display Kit within range of your computer , you may want to temporarily prevent your computer from connecting wir elessly to a particular IOGEAR W ir[...]

18 3. Adjusting Video Settings 1. T ur ning On Mirroring Mode Click on the Display icon and then click on T urn on Mirroring”. Once in Mirroring mode, the image displayed on the Mac will also be displayed on the monitor or TV display . 2. Conguring the Display in Mac Mode Click on the Display icon and select the resolution choices to obtain th[...]

19 T roubleshooting and Support This section provides answers for pr oblems you may encounter when using your IOGEAR Wireless Computer to HD Display Kit. If you need to contact IOGEAR, you will nd information regar ding IOGear’ s support services at the end of this section. Before you contact IOGEAR, please r ead the troubleshooting advice in [...]

20 Display Error . • Check that the cable from the Receiver Base to the external monitor or projector is rmly attached. The external monitor connected to the Receiver Base shows only the wallpaper background of my Windows® desktop. • The default conguration for the external monitor connected to the Receiver Base is in the Extend mode (an[...]

21 The Screen Resolution window in the Contr ol Panel does not list all of the resolution modes my monitor is capable of displaying. • The GUWA VKIT4’ s video card requir es Extended Display Identication Data (EDID) to be supplied by a connected monitor . This information includes resolution settings supported by the monitor . Some monitors [...]

22 I cannot run a 3D program or a pr ogram using DirectDraw commands on the external monitor connected to the GUWA VKIT4 • This product does not support 3D pr ograms. • Running applications that use certain DirectDraw commands (such as some 2D gaming applications) is also not supported. If you want to play these games in full-screen mode, disco[...]

23 My computer does not automatically detect the PC adaptor . • Make sure you have pr operly connected the PC adaptor to your computer’ s USB port. • Unplug, then re-plug in the adaptor . • Reboot the PC • The computer’ s USB port may be damaged. Check to see if other devices can be successfully connected to the port. The connection to [...]

24 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonable protection against harmful interfer ence in a residential setting. This product generates, uses, and can radiate [...]

25 WE’RE HERE TO HELP YOU! NEED ASSIST ANCE SETTING UP THIS PRODUCT? Make sure you: 1. Visit www .iogear .com for more product information 2. Visit www .iogear .com/support for live help and product support W arranty Information This product carries a 1 Y ear Limited Warranty . For the terms and conditions of this war - ranty , please go to http:[...]

26[...]

27[...]

© 2013 IOGEAR ®[...]