IOGear GIC704SR5W6 manual

1 GIC704SR5W6 P ART NO. M0560 Installation Installation Installation Guide RAID5 eSA T A 1.5Gbps 4 External port PCI Card[...]

[...]

3 T able of Contents Caution 4 Introduction 5 Features 6 Package Contents 7 What Is RAID? 8 Installation Procedur e 11 Software Installation 18 Federal Communications Commission (FCC) Statement 22 CE Statement 24 Limited W arranty 25 Contact 26[...]

4 Caution • Before installation of the contr oller card, we recommend that users study this manual fi rst. This RAID manual has more information on RAID ar chitecture, RAID features, RAID installation, RAID settings and Management software for the RAID5 GUI (Graphical User Interface). • W indows Device Manager cannot recognize har d drives wit[...]

5 Introduction The board of fers the ability to upgrade your desktop computer to RAID 5, RAID 0+1, RAID 0, or RAID 1 as well as JBOD. The board can contr ol four independent Serial A T A channels. Each channel has its own Serial A T A bus and will support one Serial A T A device. The board supports Serial A T A Generation 1 transfer rates of 1.5 Gb[...]

6 Features PCI Interface Compliant with PCI Speci fi cations, Revision 2.2. • Integrated PCI DMA engines. • 32 bit, 33/66MHz fully compliant PCI host interface. • High Speed Serial A T A Interface Four high speed Serial A T A interface ports, each supporting 1st generation Serial A T A data rates • (1.5Gb/s). RAID 5 (Distributed Parity RAI[...]

7 Package Contents RAID5 SA T A-150 4Ports PCI Host Adapter • Quick Start Guide • Driver CD •[...]

8 RAID - Redundant Array of Independent Disks RAID technology manages multiple disk drives to enhance I/O performance and provide r edundancy in order to withstand the failur e of any individual drive, without loss of data. Disk Striping (RAID 0) Striping is a performance-oriented, non-redundant data mapping technique. While Striping is discussed a[...]

9 Mirror ed-Striping (RAID 0+1 also known as RAID 10) A Mirror ed-Striping Set does just what it says, combining both Striping and Mirroring technologies to pro- vide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirr oring. When data is written to a Mirrored-Striped Set, instead o[...]

10 Just a Bunch of Disks (JBOD/Contiguous) JBOD (also known as Contiguous) means a logical drive that can either be an entire disk drive or a segment of a single disk drive. For this card, the JBOD function only supports one disk. JBOD her e is a Contiguous con fi guration option when using the “Create RAID Group” within the SA T ARAID5 Manage[...]

11 1. Power down the computer system. 2. Insert the Host card into an available bus slot. 3. Power on the computer system. 4. Install drivers for the device. 5. Remove all existing SA T ARAID GUIs (or Java SA T ARAID GUIs) to ensure your new SA T ARAID5 GUI installs and functions properly . 6. Install the SA T ARAID5 GUI. 7. Power down the computer[...]

12 11. Use the SA T ARAID5 Manager GUI to con fi gur e your RAID settings. If using 1 Disk, please select “Concatenate” or “Contiguous” settings only . If using 2 Disks, do NOT select “Parity RAID” or “Mirror ed Stripe” settings. If using 3 Disks, do NOT select the “Mirror ed Stripe” setting. 12. Open “T ask Manager” to mak[...]

13 BIOS (RAID Settings) Creating and deleting RAID sets is a function found in the BIOS. During boot up, the RAID setting message will appear and pause for a few moments to allow the user access to its settings. The board will act as a normal NON-RAID card when the BIOS does not have it con fi gured for RAID. If you’re using traditional par alle[...]

14 Creating Mirr ored Sets (RAID 1) 1. As the BIOS boots, Press CTRL+S or F4 to enter the RAID bios utility . 2. Select Create RAID set. Pr ess Enter . 3. Select RAID 1 then press Enter . 4. Select Auto con fi guration . Pr ess Enter . 5. Press Y to save your settings. 6. Press CTRL+E and then pr ess Y to exit the setup. 7. Continue with conventio[...]

15 Creating a Mirr ored-Striped Set (RAID 10) 1. As the BIOS boots, press CTRL+S or F4 to enter the RAID bios utility . 2. Select Create RAID set . Pr ess F2 . 3. Select RAID 10 then press Enter . 4. Select Auto con fi guration . Pr ess Enter . 5. Press Y and then pr ess ESC to exit the setup. 7. Continue with conventional Fdisk and Format steps t[...]

16 Creating JBOD Sets 1. As the BIOS boots, Press CTRL+S or F4 to enter the RAID bios utility . 2. Select Create RAID set . Pr ess Enter . 3. Select JBOD (Single) then press Enter . 4. Select JBOD Drives . Press Enter . 5. Select RAID size . Press Enter . 6. Press Y to save your settings. Creating Spar e Drive 1. As the BIOS boots, Press CTRL+S or [...]

17 Deleting RAID Sets 1. As the BIOS boots, Press CTRL+S or F4 to enter the RAID bios utility . 2. Select Delete RAID set . Press Enter . 3. Answer Y to remove the RAID set. If the RAID set being deleted is a Striped, then all of the data will be lost. If the set being deleted is a Mirror ed set, then the data will remain intact and accessible on b[...]

18 Windows XP Fresh Installation 1. Power off the system. Insert the contr oller card into a PCI slot and connect the hard drives to the controller car d. Power up the system. 2. Put your Windows XP CD into the CD-ROM/DVD drive. 3. Press F6 for thir d party SCSI or driver installation. Press ‘S’ when setup asks if you want to specify an additio[...]

19 Windows XP Existing Installation 1. Power off the system. Insert the contr oller card into a PCI slot and connect the hard drives to the control- ler card. Power up the system. 2. During OS boot up, Windows will display the ‘Found New Hardware Wizard’ . Click ‘Next’ . 3. Select ‘Install from a list or speci fi c location (Advanced)’[...]

20 4. Insert the Driver CD in your CD-ROM/DVD drive, check Specify a location , uncheck the other boxes, click Next , type in your CD-ROM/DVD Drive Letter and Click Browse . 5. Specify the following location: [CD Drive Letter]:RAID5 SA T A_4PortSiI3114W in XP_2000_2003Driver . Select Open then click OK . 6. When the wizard indicates that it fou[...]

21 V erifying controller installation 1. Right click on the ‘My Computer’ icon and select ‘Properties’ . Left click on the ‘Har dware’ tab then select the ‘Device Manager’ button. 2. Double click on ‘SCSI and RAID Controllers’ , If ther e is no yellow ‘!’ or ‘?’ in front of the ‘Silicon Image SiI 3114 SoftRAID5 Control[...]

22 Federal Communications Commission (FCC) Statement Federal Communications Commission (FCC) Statement 15.21 Y ou are cautioned that changes or modi fi cations not expressly approved by the part r esponsible for compliance could void the user’ s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with[...]

23 - Connect the equipment into an outlet on a circuit dif ferent from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. THIS DEVICE COMPLIES WITH P ART 15 OF THE FCC RULES. OPERA TION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1. this device may not cause interference and 2. this device [...]

24 This device has been tested and found to comply with the requir ements set up in the council directive on the approximation of the law of member states r elating to EMC Directive 89/336/EEC, Low V oltage Directive 73/23/EEC and R&TTE Directive 99/5/EC. CE Statement[...]

25 The manufacturer , IOGEAR, makes NO warranty or repr esentation, whether express or implied, regar ding the contents, use or suitability of this software, disk or documentation. IOGEAR speci fi cally disclaims any and all warranties regar ding the quality and performance of this software, disk or documentation including, but not limited to the [...]

26 Contact T oll Free: (866) 9-IOGEAR Phone: (949) 453-8782 23 Hubble Irvine, CA 92618 USA www .iogear .com support@iogear .com ©2007 IOGEAR. All Rights Reserved. P ART NO. M0560 IOGEAR, the IOGEAR logo, MiniView , VSE are trademarks or registered trademarks of IOGEAR, Inc. Micr osoft and W indows are register ed trademarks of Microsoft Corporatio[...]

27[...]

© 2007 IOGEAR, INC. FUN IOGEAR offers connectivity solutions that ar e innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resour ces. The use of our technology solu tions helps reduce electr onic [...]