Intel MB935 manual

MB935 Socket LGA775 Pentium ® 4 Intel ® Q35 Chipset Sever Motherboard USER’S MANUAL Version 1.0[...]

ii MB935 User’s Manual Acknowledgments Award is a registered trademark of Award Software International, Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Pentium 4 are registered trademarks of Intel Corporation. Microsoft Windows is a regist ered trademark of Microsoft Corporation. Winbond is a registered trademar[...]

MB935 User’s Manual iii Table of Contents Introduction ....................................................... 1 Product Description ............................................................. 1 Checklist .............................................................................. 2 Specifications .............................................[...]

The MB935 Motherboard iv MB935 User’s Manual[...]

INTRODUCTION MB935 User’s Manual 1 Introduction Product Description The MB935 LGA 775 Pentium ® 4 motherboard incorporates the Intel Q35 chipset that can utilize a single LGA775 processor of up to 4.0GHz or higher and supports FSB frequency of 800/ 1066 Mhz/1333Mhz 200MHz (800MT/s), 266MHz (1066MT/ s), and 333MHz (1333MT/s) HCLK respectively. Th[...]

INTRODUCTION 2 MB935 User’s Manual Checklist Your MB935 Pentium ® 4 motherboard package should include the item s listed below: • The MB935 mot herboard • This User’s manual • 1 VGA cable • 1 IDE cable • 1 USB cable • 1 PS/2 Keyboard/Mouse cable • 1 SATA cable • 1 Serial-Port cable • 1 CD containing the foll owing: • Chipse[...]

INTRODUCTION MB935 User’s Manual 3 Specifications Product Name MB935 CPU Support Socket LGA775, Supports the Intel Core 2 Duo and Intel Core2 Quad processors, and Intel Celeron 400 (Conroe-L) Sequence processor. CPU Voltage 0.5V~1.6V (VRD 11.0) System Speed Up to 3.8GHz+ CPU FSB 800MHz/1066MHz /1333MHz Green /APM APM1.2 CPU Socket LGA 775 Chipset[...]

INTRODUCTION Board Dimensions 4 MB935 User’s Manual[...]

INSTALLATIONS MB935 User’s Manual 5 Installations This section provides inform ation on how to use the jum pers and connectors on the M B935 in order to set up a workable syst em. The topics covered are: Installing the CPU ........................................................................ 6 ATX Power Installation ...........................[...]

INSTALLATIONS Installing the CPU The MB935 mot herboard supports an LGA 775 processor socket for Intel Core 2 Duo and Intel Core2 Quad processors, and Intel Celeron 400(Conroe-L) Sequence processor. The LGA 775 processor socket comes with a l ever to secure the processor. Refer to the pictures belo w, from left to right, on how to place the process[...]

INSTALLATIONS MB935 User’s Manual 7 ATX Power Installation The system power i s provided to the motherboard wi th the ATX1 and ATX_12V power connectors. ATX1 is a 24-pin power connector and ATX_12V is a 8-pin 12V power connector. The 24-pin power connector can to be connected to a standard 20-pi n ATX power connector in a standard ATX power suppl[...]

INSTALLATIONS 8 MB935 User’s Manual Setting the Jumpers Jumpers are used on MB935 to select various settings and features according to your needs and applica tions. Contact your supplier if you have doubts about the best configurati on for your needs. The following lists the connectors on MB 935 and their respective functions. Jumper Locations on[...]

INSTALLATIONS Jumper Locations on MB935 Jumpers on MB935 ........................................................................... Page JP1, JP2: Watchdog Timer & L AN1/LAN2 Bypass Settings ............. 10 JP9: Configure and Recovery (Factory use only) ................................ 10 JP16: Clear CMOS Contents ............................[...]

INSTALLATIONS JP1, JP2: Watchdog Timer & LAN1/LAN2 Bypass Settings JP1, JP2 Setting Function JP2 Pin 1-2 & 3-4 Open JP1 Pin 1-2 Closed System will bypass LANs upon the time out of watchdog tim er. JP2 Pin 1-2 & 3-4 Open JP1 Pin 2-3 Closed System LANs by pass function controlled by SIO GPIO15. JP2 Pin 1-2 & 3-4 Closed JP1 Pin 1-2 Clo[...]

INSTALLATIONS JP17: Pow er ON Setting JP17 Setting Function Pin 1-2 Short/Closed Power on by power supply AC on Pin 2-3 Short/Closed Power on by syste m button MB935 User’s Manual 11[...]

INSTALLATIONS 12 MB935 User’s Manual Connectors on MB935 The connectors on MB935 allow you t o connect external devices such as keyboard, mouse, hard disk dri ves, printers… etc. The following table lists the connectors on MB 935 and their respective functions. Connector Locations on MB935 .......................................................[...]

INSTALLATIONS Connector Locations on MB935 MB935 User’s Manual 13[...]

INSTALLATIONS ATX1: 24-pin ATX Pow er Connector Signal Name Pin # Pin # Signal Name 3.3V 13 1 3.3V -12V 14 2 3.3V Ground 15 3 Ground PS-ON 16 4 +5V Ground 17 5 Ground Ground 18 6 +5V Ground 19 7 Ground -5V 20 8 Power good +5V 21 9 5VSB +5V 22 10 +12V +5V 23 11 +12V Ground 24 12 +3.3V ATX_12V1: ATX 12V Pow er Connector Signal Name Pin # Pin # Signal[...]

INSTALLATIONS FAN4: System Fan Power Connector Pin # Signal Name 1 Ground 2 +12V 3 Rotation detection 4 Control CN1: Slim Type II Compact Flash Connector CN2: COM1 Serial Port CN2 (COM1) is a DB-9 connect or. Signal Name Pin # Pin # Signal Name DCD, Data carrier detect 1 6 DSR, Data set ready RXD, Receive data 2 7 RTS, Request to send TXD, Transmit[...]

INSTALLATIONS CN14: Front Side Bridge Board to ID370 Signal Name Pin # Pin # Signal Name PWR-SW 1 2 GND Reset-SW 3 4 GND Speaker 5 6 VCC VCC 7 8 VCC GND(PWR LED) 9 10 Pull up to VCC HDD LED 11 12 Pull up to VCC RELAY LED 13 14 Pull up to VCC GND 15 16 GND GND 17 18 GND GPO0 19 20 GPI0 GPO1 21 22 GPI1 GPO2 23 24 GPI2 GPO3 25 26 GPI3 GPO4 27 28 GPI4 [...]

INSTALLATIONS IDE1 Signal Name Pin # Pin # Signal Name Reset IDE 1 2 Ground Host data 7 3 4 Host data 8 Host data 6 5 6 Host data 9 Host data 5 7 8 Host data 10 Host data 4 9 10 Host data 11 Host data 3 11 12 Host data 12 Host data 2 13 14 Host data 13 Host data 1 15 16 Host data 14 Host data 0 17 18 Host data 15 Ground 19 20 Key DRQ0 21 22 Ground [...]

BIOS SETUP J3: Keyboard / Mouse Connector J3 is a 10-pin header connector, has functions for both keyboard and mouse. The following t able shows the pin assignments of this connector. Signal Name Pin # Pin # Si gnal Name Protect pin 10 5 N.C. KB clock 9 4 Mouse clock KB data 8 3 Mouse data VCC 7 2 VCC Ground 6 1 Ground J4: SPI Debug Tools Port (Fac[...]

BIOS SETUP MB935 User’s Manual 19 BIOS Setup This chapter describes the different setting s available in the Award BIOS that comes with the board. The topics covered in this chapter are as follows: BIOS Introduction ........................................................................ 20 BIOS Setup .............................................[...]

BIOS SETUP 20 MB935 User’s Manual BIOS Introduction The Award BIOS (Basic Input/Output Sy stem) inst alled in your computer sy stem’s ROM supports Intel processors. The BIOS provides critical l ow-level support for a standard device such as disk dri ves, serial ports and parallel ports . It also adds virus and password protection as well as spe[...]

BIOS SETUP MB935 User’s Manual 21 Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail-Safe Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Save & Exit Se[...]

BIOS SETUP 22 MB935 User’s Manual Standard CMOS Setup “Standard CMOS Setup” choice al lows you to record some basi c hardware configurations in your com puter system and set the system clock and error handling. If the m otherboard is already install ed in a working system, you will not need to select this option . You will n eed to run the St[...]

BIOS SETUP MB935 User’s Manual 23 Time The time format is: Hour : 00 to 23 Minute : 00 to 59 Second : 00 to 59 To set the time, hi ghlight the “Time” field and use the <PgUp>/ <PgDn> or +/- keys to set the current time. IDE Channel Master/Slave ICH9 supports 4 Serial ATA connectors; ITE controller support 1 CF and 1 IDE connectors[...]

BIOS SETUP 24 MB935 User’s Manual Video This field selects the type of video di splay card instal led i n your syst em . You can choose the following video displ ay cards: EGA/VGA For EGA, VGA, SEGA, SVGA or PGA monitor adapters. (default) CGA 40 Power up in 40 column m ode. CGA 80 Power up in 80 column m ode. MONO For Hercules or MDA adapters. H[...]

BIOS SETUP MB935 User’s Manual 25 Advanced BIOS Features This section allows you to configure and im prove your system and allows you to set up some system f eatures according to your preference. Phoenix - AwardBIOS CMOS Setup Utility Advanced BIOS Features CPU Feature Press Enter ITEM HELP Hark Disk Boot Priori ty Press Enter Menu Lev el > CD[...]

BIOS SETUP 26 MB935 User’s Manual First/Second/Third Boot Device These fields determine the drive that the system searches first for an operating system . Boot Other Device These fields allow the system to s earch for an OS from other devices other than the ones selected in the First /Second/Third Boot Devi ce. Boot Up NumLock Status This allows [...]

BIOS SETUP MB935 User’s Manual 27 Security Option This field allows you to limit access to the System and Setup. The default value is Setup . When you select System, the system prompts for the User Password every ti me you boot up. When you select Setup, the system always boots up and prom pts for the Supervisor Password only when the Setup utili[...]

BIOS SETUP 28 MB935 User’s Manual Advanced Chipset Features This Setup me nu controls the configuration of t he chipset. Phoenix - AwardBIOS CMOS Setup Utility Advanced Chipset Features DRAM Timing Selectabl e By SPD ITEM HELP CAS Latency Time Auto Menu Level > DRAM RAS# to CAS# Dela y DRAM RAS# Precharg e Precharge dealy ( tRAS) System Memory[...]

BIOS SETUP MB935 User’s Manual 29 System Memory Frequency This field sets the frequency o f the DRAM memory installed. The default setting is Auto . The other settings are DDR667 and DDR800 . System BIOS Cacheable The setting of Enabled allows caching of the system BIOS ROM at F000h-FFFFFh, resulting in better system perform ance. However, if any[...]

BIOS SETUP 30 MB935 User’s Manual Integrated Peripherals This section sets configurations for your hard disk and ot her integrated peripherals.. Details follow. Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals OnChip IDE Device Press Enter IT EM HELP SuperIO Device Press Enter Menu Lev el > 2 nd SuperIO Device Press Enter USB Devi[...]

BIOS SETUP MB935 User’s Manual 31 IDE HDD Block Mode This field allows your hard disk cont roller to use the fast block m ode to transfer data to and from your hard disk drive. OnChip Primary/Secondary PCI IDE The integrated peripheral controlle r contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel[...]

BIOS SETUP 32 MB935 User’s Manual KB Pow er ON Passw ord This field allows users to set the password when keyboard power on is the mode of the Power ON functi on. Hot Key Power ON This field sets certai n keys, also known as hot keys, on the keyboard that can be used as a ‘switch’ to power on the system. Onboard Serial Port These fields allow[...]

BIOS SETUP MB935 User’s Manual 33 Power Management Setup The Power Managem ent Setup allows you to save energy of your system effectively. Phoenix - AwardBIOS CMOS Setup Utility Power Management Setup PCI Express PM Function Press Enter ITEM HELP ACPI Function Enabled ACPI Suspend Type S1(POS) Menu Lev el > Run VGABIOS if Resume Auto Power Man[...]

BIOS SETUP 34 MB935 User’s Manual Video Off Method This field defines the Video Off features. There are three options. V/H SYNC + Blank Defaul t setting, blank the screen and turn off vertical and horizontal scanning. DPMS Allows BIOS to control t he video display. Blank Screen Writes blanks t o the video buffer. Video Off In Suspend When enabled[...]

BIOS SETUP MB935 User’s Manual 35 Resume by Alarm This field enables or disabl es the resumption of the system operation. When enab led , the user is allowed to set th e Date and Time . Reload Global Timer Events The HDD, FDD, COM, LPT Ports, and PCI PIRQ are I/O events that can prevent the system from entering a power saving m ode or can awaken [...]

BIOS SETUP 36 MB935 User’s Manual PNP/PCI Configurations This option configures the PCI bus sy stem. All PCI bus system s on the system use INT#, thus all installed PCI cards must be set to this value. Phoenix - AwardBIOS CMOS Setup Utility PnP/PCI Configurations Init Display First PCI Sl ot ITEM HELP Reset Configuration Data Disabled M enu Level[...]

BIOS SETUP MB935 User’s Manual 37 PC Health Status This section shows the parameters in determining the PC Health Status. These parameters include tem perat ures, fan speeds and voltages. Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Shutdown Temperature Disabled ITEM HELP CPU Warning Temperature Disabled Menu Lev el > System Temp. 4[...]

BIOS SETUP 38 MB935 User’s Manual Frequency/Voltage Control This section shows the user how to configure t he processor frequency. Phoenix - AwardBIOS CMOS Setup Utility Frequency/Voltag e Control CPU Clock Ratio Unlock Disabled ITEM HELP CPU Clock Ratio 9X Menu Lev el > Auto Detect PCI Clk Disabled Spread Spectrum Modulated Disabled Auto Dete[...]

BIOS SETUP MB935 User’s Manual 39 Load Fail-Safe Defaults This option allows y ou to load the t roubleshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high-perform ance features. Load Optimized Defaults This option allows yo u to load the d efault values to your system configuratio[...]

BIOS SETUP 40 MB935 User’s Manual This page is intention ally left blank.[...]

DRIVERS INSTALLATION MB935 User’s Manual 41 Drivers Installation This section describes the in stalla tion procedures for software and drivers under the Windows 98SE, Windows ME, Windows 2000 and Windows XP. The software and drivers are included with the motherboard. If you find t he items missing, please cont act the vendor where you made the pu[...]

DRIVER INSTALLATION Intel Chipset Device Software Installation The Intel Chipset Drivers should be i nstalled first before t he software drivers to enable Plug & Pl ay INF support for Int el chi pset com ponent s. Follow the instructions bel ow to complete t he installation under Windows 98SE/ME/2000/XP. 1. Insert the CD that comes with the bo [...]

DRIVERS INSTALLATION 3. When the Welcome screen appears, click Next to continu e. Click Yes to accept the software license ag reement and proceed with the installation process. MB935 User’s Manual 43[...]

DRIVER INSTALLATION 5. On Readme Inform ation screen, click Next to continue installation. 6. When Setup is co mplete, click Finish to complete the setup process. 44 MB935 User’s Manual[...]

DRIVERS INSTALLATION VGA Drivers Installation To install the VGA drivers, follow the steps belo w to proceed with the installation. 1. Insert the CD that comes with the motherboard. Click Intel and then Intel(R) Q35 Chipset Drivers . 2. Click Intel(R) Q35 Chipset Family Graphics Driver. MB935 User’s Manual 45[...]

DRIVER INSTALLATION 3. When the Welcome screen appears, click Next to continu e. Click Yes to agree with the li cense agreement and continue installation. 46 MB935 User’s Manual[...]

DRIVERS INSTALLATION 4. Click Next t o continue the setup proce ss. Restart the com puter as prompted and for changes to ta ke effect. MB935 User’s Manual 47[...]

DRIVER INSTALLATION IDE Controller Drivers Installation Follow the steps below to install IDE Co ntroller Drivers. 1. Insert th e CD that comes with the motherboard. Click SCI/SATA Card and then ITE8211 IDE Dri vers . When the Welcome screen appears, click Next to continue. 48 MB935 User’s Manual[...]

DRIVERS INSTALLATION 4. Select Type as ‘Typical’ and click Next to continue. Restart when promoted and fini sh the installati on process. MB935 User’s Manual 49[...]

DRIVER INSTALLATION Intel PRO LAN Drivers Installation Follow the steps below to complete the installation o f the Intel PRO LAN drivers. 1. Insert the CD that comes with the motherboard. Click LAN Card and then Intel(R) PRO 82574L LAN Drivers . 2. Click Install Drivers and Software . When the Welcome screen appears, click Next to continue. 3. Clic[...]

DRIVERS INSTALLATION 4. Click the Drivers checkbox as shown below and click Next to continue installation . Then, click Install to beg in the installation. 5. When In stallShield Wizard has co mpleted in stallatio n, click Finish . MB935 User’s Manual 51[...]

DRIVER INSTALLATION 52 MB935 User’s Manual This page is intention ally left blank.[...]

APPENDIX MB935 User’s Manual 53 Appendix A. I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also b ecomes the identity of the d evice. The following table lists the I/O port addresses u sed . Address Device Description 000h - 01Fh DMA Controller #1 020h - 03Fh Interrupt Controller #1 040h - [...]

APPENDIX 54 MB935 User’s Manual B. Interrupt Request Lines (IRQ) Peripheral devices use interrupt request l ines to notify CPU for the service required. The following table shows the IRQ used by the devices on board. Level Function IRQ0 System Timer Output IRQ1 Keyboard IRQ2 Interrupt Cascade IRQ3 Serial Port #2 IRQ4 Serial Port #1 IRQ5 Reserved [...]

APPENDIX MB935 User’s Manual 55 C. Watchdog Timer Configuration The WDT is used to generate a variety of output signals after a user programm able count. The WDT is suitable for use i n the prevention of system lock-up, such as when soft ware becom es trapped in a deadlock. Under these sort of circumstances, the tim er will count to zero and the [...]

APPENDIX 56 MB935 User’s Manual mov cl, 0F5h call Read_Reg and al , NOT 08h call Write_Reg ;set count m ode as second pop ax mov cl, 0F6h call Write_Reg ;set watchdog timer mov al, 01h mov cl, 30h call Write_Reg ;watchdog enabled call Lock_Chip r e t Enable_And_Set_Watchdog Endp ;[]=============================================== ; Name : Disable_[...]

APPENDIX MB935 User’s Manual 57 ; Name : Unlock_Chip ; IN : None ; OUT : None ;[]=============================================== Unlock_Chip Proc Near Mov dx, 4Eh mov al, 87h out dx, al out dx, al r e t Unlock_Chip Endp ;[]================================================ ; Name : Lock_Chip ; IN : None ; OUT : None ;[]=============================[...]

APPENDIX 58 MB935 User’s Manual ; Name : Read_Reg ; IN : CL - register index ; OUT : AL - Value to read ;[]================================================= == Read_Reg Proc Near Mov al, cl mov dx, 4Eh out dx, al inc dx in al, dx r e t Read_Reg Endp ;[]================================================[...]

APPENDIX MB935 User’s Manual 59 D. Digital I/O Sample Code Filename: W 627hf. h //===================================================================== // // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, IN CLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILI[...]

APPENDIX 60 MB935 User’s Manual Filename: W 627hf.cpp //===================================================================== // // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, IN CLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/ OR FITNESS FOR A P[...]

APPENDIX MB935 User’s Manual 61 //===================================================================== // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, IN CLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/ OR FITNESS FOR A PARTICULAR // PURPOSE. //=[...]

APPENDIX 62 MB935 User’s Manual This page is intention ally left blank.[...]