Ice-O-Matic ICE250 through ICE2100 SERIES manual

ICE-O-Matic 11100 East 45th Ave Denver, Colorado 80239 Part Number 9081264-01 Print Date 3/05 Installation, Start-Up and Maintenance Manual ICE SERIES CUBERS ICE0250 through ICE2100 SERIES* *Includes Undercounter and 22 Inch Series[...]

ICE Series Forward Page i How To Use This Manual ICE-O-Matic provides this manual as an aid to the serv ice technici a n in installation and maintenance of the ICE Series (electro-mech anical) cube ice m achin es. Do not attempt to perform inst allation, start-up or maintenance unless you have read and fully understa nd this man ual. If at any time[...]

ICE Series Table of Contents Page ii F o r w a r d Page i T a b l e o f C o n t e n t s Page ii Freight Claim Procedure Page iii W a r r a n t y Page iv Model Number and Serial Number Format Page 1 Installation Guidelines Page 2 Remote Condenser Guidelines Page 4 Electrical and Plumbing Requirements Page 6 H o w t h e M a c h i n e W o r k s Page 1[...]

ICE Series Freight Claim Procedure Page iii Freight Claims Important! Inspect Promptly This merchandise has bee n carefully inspecte d and p acked in accordance with the carri er’ s packing specifications. Responsibility for safe deliv ery has be en assumed by the carri er, i f loss or damage occurs, you as the con signee must file a claim with t[...]

ICE Series Warranty Page iv ICE-O-MATIC Parts and Labor Domestic & International Warranty Mile High Equipment Compan y (the “Company”) warrants Ice-O-Mati c brand ice machines, ice disp ens ers, remote condensers, and ice storage bins to the original user cu stomer against defects in material and fact ory workmansh ip for a period of thirty[...]

ICE Series Model and Serial Number Format Page 1 Model and Serial Number Format The serial number format and ma chine specifics are detailed on the data plate. ICE 040 0 H A 2 Design Level Condenser Type: A=Air, W=Water, R=Remote Cube Size: H=Half, F=Full Voltage: 0=115V, 6= 230V/60Hz. 5=240V/50Hz. Approximate Production in 24 hours @70 ° FAir/50 [...]

ICE Series Installation Guidelines Page 2 Installation Guidelines For proper operation of the ICE-O -Matic ice machine, the follo wing installation gui deline s must be followed. Failure to do so may result in loss of production capacity, pr emature part failures, and may void all warra nties. Reference the installation parameters prior to in stall[...]

ICE Series Installation Guidelines Page 3 Secure the machine on top of the bin or disp enser. Attach the ice machine to the bin with the mounting strap s provided with the bin or dispen se r. If the ice machine is to be mounted on a bin or dispenser oth er than an ICE-O-Mati c, refer to the manufactures instructions for machine mounting. If the ice[...]

ICE Series Remote Condenser Guidelines Page 4 Remote Condenser Installation For proper operation of the ICE-O -Matic i ce machine, the follo wing installation guideline s must be followed. Failure to do so may result in loss of production capacity, premature part failure, and may void all wa rranties. Remote condensers must be install ed per local [...]

ICE Series Remote Condenser Guidelines Page 5 The ICE050 0R 3 , ICE0606R 3 , ICE806R 3 , ICE1006R 3 , ICE1606HR 3 and ICE1506R 2 Remote ice makers incorporate the mixing valve in the condenser. This configuration allows up to a 100 foot cal c ulated remote line set run. Reference the diagram below to calculate the maximu m 100 foot line set run. IC[...]

ICE Series Electrical and Plumbing Requirements Page 6 Electrical and Plumbing Requirements : ICEU150, 220, 225 and 226 Note: The ICEU150, 220, 225 and 226 do not have a splash curtain. These models utilize a thermostatic bin control in place of a mechanical bin swit ch.[...]

ICE Series Electrical and Plumbing Requirements Page 7 Electrical and Plumbing Requirements : ICEU300 Note: The ICEU300 Series do not have a splash curtain. This models utilize a thermostatic bin control in place of a mechanical bin switch[...]

ICE Series Electrical and Plumbing Requirements Page 8 Electrical and Plumbing Requirements: ICE0250, ICE0400, ICE0500 ICE0600[...]

ICE Series Electrical and Plumbing Requirements Page 9 Electrical and Plumbing Requirements: ICE0806 and ICE1006[...]

ICE Series Electrical and Plumbing Requirements Page 10 Electrical and Plumbing Requirements: 48 Inch Wide Cubers[...]

ICE Series Electrical and Plumbing Requirements Page 11 Electrical and Plumbing Requirements: 22 Inch Wide Cubers[...]

ICE Series Electrical and Plumbing Requirement Page 12 Electrical and Plumbing Requirements : ICE1606 Remote[...]

ICE Series Electrical and Plumbing Requirements Page 13 Electrical and Plumbing Requirements : ICE1506 Remote[...]

ICE Series How the ICE Machine Works Page 14 How the ICE Machine Works A general description of how the ICE Series cubers work is give n belo w. With the ICE/OFF/WASH switch in the ICE position, the compressor, water p ump a nd condenser fan motor (when applicable) will energize starting the freeze cycle. During the freeze cycle, wa ter is ci rcula[...]

ICE Series Start-Up Procedure Page 15 Start-Up Procedure Before starting the machine, make sure the machi ne is level within 1/8 inch in all directions, the bin or dispe nse r leg height can be adjusted by rotating the leg foot. Check the water level in the water trough. It should b e appr oximat ely ½ inch above the top of the water pump impeller[...]

ICE Series Start-Up Procedure Page 16 Bin Control Operation The bin control is used to shut the machine off when the bin fills with ice. The bin control mu st be che cked upon installation or initial start-up and when performing mai ntenan ce. Adjustments are not covered under warranty. There is one bin switch for each evaporator. The actu ator arm[...]

ICE Series General Maintenance Page 17 Electrical shock and/or inju ry from movin g parts inside this machine can cause serious injury. Disconne ct electri cal supply to machine prior to performing a ny adjustme nts or repairs. Failure to perform the required maintenance at the fre quency specified will void warranty coverage in the ev ent of a rel[...]

ICE Series Cleaning Procedure Page 18 Ice Machine Cleaning and Sanitizing Instructions 1. Remove the ice machine front panel. 2. Make sure that all the ice is off of the evaporator. If ice is being made, wait for cycle completion, then turn the machine “OFF” at the ICE/OFF/WASH selector switch . 3. Remove or melt all ice in the storage bin. 4. [...]

ICE Series Cabinet Care Page 19 Cleaning stainless steel Commercial grades of stai nless ste el ar e susceptible to rusting if not properly maintained. It is important that you properly care for the st ainless steel surfaces of your ice machine and bin to avoid the pos sibility of rust or corrosion. Use the following recommended guideli nes for kee[...]

ICE Series Winterizing Procedure Page 20 Winterizing Procedures Important! Whenever the ice machine is take n out of operation dur ing the winter months, the procedure below mu st be performed. Failure to do so may cause seri ous damage and will void all warra nties. 1. Turn off water to machine. 2. Make sure all ice is off of the evaporato r(s). I[...]

ICE Series Service History Page 21 Service History Model Number__________________Serial Number__________________Date Installed__________ ___________________ __________________ __________________ _______________ __________________ __ ___________________ __________________ __________________ _______________ __________________ __ ___________________ _[...]