IBM 2809 manual

AS / 400e 1 7 0 o r 2 50 2 8 0 9 o r 2 8 2 4 LAN/W AN W o r ksta ti o n Ca r d In stru cti o n Ve r s i o n 4 SENG-2809-04 [...]

[...]

AS / 400e 1 7 0 o r 2 50 2 8 0 9 o r 2 8 2 4 LAN/W AN W o r ksta ti o n Ca r d In stru cti o n Ve r s i o n 4 SENG-2809-04 [...]

Note Before using this information and the pr oduct it supports, be sure to r ead the “Safety and Environmental Notices” on page iii and the “Notices” on page 1 1. Fifth Edition (July 2000) This edition applies only to reduced instructions set computer (RISC) systems. © Copyright International Business Machines Corporation 1998, 2000. All [...]

Safety and Environmental Notices Danger Notices A danger notice calls attention to a situation that is potentially lethal or extr emely hazardous to people. DANGER An electrical outlet that is not correctly wired could place hazardous voltage on metal parts of the system or the products that attach to the system. It is the customer’s responsibili[...]

Laser Safety Information CAUTION: This product may contain a CD-ROM which is a class 1 laser product. (RSFTC240) Product Recycling and Disposal Components of the system, such as structural parts and cir cuit cards, can be recycled wher e recycling facilities exist. IBM does not curr ently collect and recycle used IBM products fr om customers in the[...]

Installation Instructions This feature is customer installed. It will take appr oximately 1 hour to install the hardwar e. However , you may elect not to perform this feature installation yourself. Y ou may contact IBM or an Authorized Dealer to make arrangements for them to perform the feature installation for a fee. Y ou need to allow additional [...]

When you have the following cards, install them in the sequence listed below . v The 2809 or 2824 LAN/W AN workstation card v The 285x or 2866 Integrated NetFinity cards v All other adapter cards Getting Ready __ 1. Ensure that all jobs ar e complete. __ 2. When all jobs are complete, type pwrdwnsys *immed on an AS/400 command line and press the En[...]

Installing the 2809 or 2824 LAN/W AN Workstation Card __ 1. The adapter card slots ar e E02 through E14 in the expansion unit, (Figure 2). Slot E01 is not an available position. __ 2. Remove the left side cover by removing the scr ews and sliding the cover from fr ont to back until it stops. Pull the cover out (Figure 3 on page 4). Figure 2. Adapte[...]

Y our system unit contains a battery that only trained personnel can replace. __ 3. CAUTION: The battery is a lithium battery . Only trained service personnel may replace this battery using the instructions in the Problem Analysis, Repair , and Parts service manual. T o avoid possible explosion, do not burn or charge the battery . Exchange only wit[...]

__ 5. Y ou will be installing the 2809 or 2824 card in car d slot E07. __ 6. Before you install the adapter car d, remove the adapter car d slot cover inside the system unit by doing the following: a. Remove the screw , (Figur e 5 on page 6). b. Slide the slot cover out. Figure 4. Attach Wrist Strap Installation Instructions 5[...]

__ 7. Find the package that contains the new adapter card. Attention: Adapter cards ar e fragile: v Handle only by the edges v Keep fingers off printed cir cuit area v Use static strap when handling v Leave in protective packaging until r eady to install Remove the adapter card fr om the electrostatic package. __ 8. Install the adapter card in the [...]

__ 9. Do you have any other adapter cards or devices to install? No Y es ↓ If you know where to install the adapter car d, follow the steps you just performed to install the card. If you do not know where to install the adapter car d, go to the instructions that came with the adapter car d. Look for the tables or steps that tell you where to inst[...]

Completing the Installation __ 1. Install the system unit back cover . __ 2. DANGER An electrical outlet that is not correctly wired could place hazardous voltage on metal parts of the system or the products that attach to the system. It is the customer ’ s responsibility to ensure that the outlet is correctly wired and grounded to prevent an ele[...]

__ 4. Look at the Function/Data display on the control panel. Does a BN appear in the Function/Data display? Ye s N o ↓ Do the following: a. Press the Up or Down select push button until 02 appears in the Function/Data display . b. Press the Enter push button on the contr ol panel. c. Press the Up or Down select push button until BN appears in th[...]

No Y es ↓ V erify that the car d you moved is listed on the Packaging Hardware Resour ces menu. If a resour ce is missing (look for a ?) because an adapter card was moved, do the following: 1) On the line that has the question mark, type a 4 in the Opt column to remove the r esource fr om the configuration. 2) Press the Enter key . 3) When Confir[...]

Notices This information was developed for products and services of fered in the U.S.A. IBM may not offer the pr oducts, services, or features discussed in this document in other countries. Consult your local IBM repr esentative for information on the products and services curr ently available in your area. Any reference to an IBM product, pr ogram[...]

If you are viewing this information softcopy , the photographs and color illustrations may not appear . The drawings and specifications contained herein shall not be r eproduced in whole or in part without the written permission of IBM. IBM has prepar ed this publication for use by customer personnel for operating and planning for the specific mach[...]

This product is in conformity with the pr otection requir ements of EU Council Directive 89/336/EEC on the appr oximation of the laws of the Member States relating to electr omagnetic compatibility . IBM cannot accept responsibility for any failure to satisfy the pr otection requir ements resulting from a non-r ecommended modification of the produc[...]

14 AS/400e 170 or 250 2809 or 2824 LAN/W AN W orkstation Card V4R5[...]

Readers’ Comments — W e’d Like to Hear from Y ou AS/400e 170 or 250 2809 or 2824 LAN/W AN W orkstation Card Instruction Publication No. SENG-2809-04 Overall, how satisfied are you with the information in this book? V ery Satisfied Satisfied Neutral Dissatisfied V ery Dissatisfied Overall satisfaction hhhhh How satisfied are you that the infor[...]

Readers ’ Comments — We ’ d Like to Hear from Y ou SENG-2809-04 SENG-2809-04  Cut or Fold Along Line Cut or Fold Along Line Fold and T ape Please do not staple Fold and T ape Fold and T ape Please do not staple Fold and T ape NO POST AGE NECESSARY IF MAILED IN THE UNITED ST A TES BUSINESS REPL Y MAIL FIRST -CLASS MAIL PERMIT NO. 4[...]

[...]

 Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber . SENG-2809-04[...]