Husqvarna 323HD60, 325HD60X-Series, 325HD75X-Series manual

E E E E n n n n g g g g l l l l i i i i s s s s h h h h 323HD60 325HD60 X-series 325HD75 X-series Oper ator ′ s manual Please r ead the operator’ s manual carefull y and make sur e you understand the instructions before using the machine.[...]

2 – English KEY T O SYMBOLS Symbols W ARNING! Incorrect or careless use of a hedge trimmer can tur n it into a dangerous tool that can cause serious or ev en f atal injur y . It is extremely important that you read and understand the contents of this operator’ s manual. Please read the oper ator’ s manual carefully and make sure y ou understa[...]

English – 3 CONTENTS Contents Note the f ollowing bef ore star ting: Please read the oper ator’ s manual carefully . Long-term exposure to noise can result in permanent hear ing impairment. So alwa ys use approved hearing protection. KEY T O SYMBOLS Symbols ....................................................................... 2 CONTENTS Conte[...]

4 – English INTR ODUCTION Dear Customer , Cong ratulations on y our choice to buy a Husqv arna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Charles XI ordered the construction of a factory on the banks of the Husqvarna River , for production of musk ets. T he location was logical, since w ater power w [...]

English – 5 WHA T IS WHA T? What is what? 1 Operator ′ s manual 2 Grease fi ller cap , be vel gear 3 Gear housing 4 Blades 5 Blade guard 6 F ront handle 7 Cylinder cov er 8 Star ter handle 9 Stop s witch 10 Throttle lock 11 Adjustable handle 12 Throttle control 13 Lock f or handle (325HD60, 325HD75) 14 Fuel tank 15 Fuel cap 16 Air purge 17 Cho[...]

6 – English GENERAL SAFETY PRECA UTIONS Impor tant P ersonal pr otective equipment HEARING PR O TECTION W ear hearing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approved e ye protection. If you use a visor then you m ust also wear approv ed protective goggles. Approv ed protective goggles m ust comply with sta[...]

English – 7 GENERAL SAFETY PRECA UTIONS Mac hine ′′ ′ ′ s safety equipment This section descr ibes the machine ′ s saf ety equipment, its pur pose, and ho w checks and maintenance should be carried out to ensure that it operates correctly . See the ”What is what?” section to locate where this equipment is positioned on your machine [...]

8 – English GENERAL SAFETY PRECA UTIONS Vibration damping system Y our machine is equipped with a vibration damping system that is designed to minimize vibration and mak e operation easier . The machine ′ s vibration damping system reduces the transf er of vibration between the engine unit/cutting equipment and the machine ′ s handle unit. Th[...]

English – 9 GENERAL SAFETY PRECA UTIONS Blades T o ensure good cutting results it is impor tant that the contact pressure between the b lades is correct. The contact pressure is adjusted by turning the screws on the underside of the bar clockwise as f ar as they will go . Then turn the screws anticlockwise a 1/4 turn. Lock the screws using the lo[...]

10 – English FUEL HANDLING Fuel safety Ne ver start the machine: 1 If you ha v e spilt fuel on it. Wipe off the spillage and allo w remaining fuel to e vapor ate. 2 If you ha v e spilt fuel on yourself or y our clothes, change your clothes . W ash any part of your body that has come in contact with fuel. Use soap and water . 3 If the machine is l[...]

English – 11 FUEL HANDLING Mixing • Alwa ys mix the petrol and oil in a clean container intended f or fuel. • Alwa ys star t by fi lling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol. • Mix (shake) the fuel mixture thoroughly bef ore fi lling t[...]

12 – English ST AR TING AND ST OPPING Chec k bef ore star ting • Inspect the working area. Remove an y objects that could be thrown out. • Check the cutting attachment. Ne v er use blades that are dull, crac ked or damaged. • Check that the machine is in perf ect working order. Check that all nuts and scre ws are tight. • Make sure the ge[...]

English – 13 ST AR TING AND ST OPPING Starting Hold the body of the machine on the ground using y our left hand (CA UTION! Not with your f oot!). Gr ip the star ter handle, slowly pull out the cord with y our right hand until you f eel some resistance (the star ter pawls g rip), now quickly and powerfully pull the cord. Push the choke control bac[...]

14 – English W ORKING TECHNIQ UES General w orking instructions P ersonal pr otection • W ear personal protective equipment. See instructions under the heading P ersonal protective equipment. • Alwa ys wear working clothes and heavy-duty long trousers. • Ne ver w ear loose clothing or jewellery . • Make sure y our hair does not hang below[...]

English – 15 W ORKING TECHNIQ UES Safety instructions after completing w ork • The transpor t guard should alwa ys be fi tted to the cutting attachment when the machine is not in use. • Make sure the cutting attachment has stopped bef ore cleaning, carr ying out repairs or an inspection. Disconnect the HT lead from the spark plug. • Alwa y[...]

16 – English MAINTENANCE Carb urettor Y our Husqvarna product has been designed and manuf actured to speci fi cations that reduce harmful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in. T o ensure that it continues to run at peak perf or mance and to minimise harmful exhaust emissions after the running-in per i[...]

English – 17 MAINTENANCE Fine adjustment of the idle speed T Adjust the idle speed with the idle adjustment scre w T , if adjustment is necessar y . First tur n the idle adjustment screw T clockwise until the b lades star t to mov e. Then turn the idle adjustment screw T anticlockwise until the b lades stop . The idle speed is correctly adjusted [...]

18 – English MAINTENANCE Cooling system T o keep the working temperature as low as possib le the machine is equipped with a cooling system. The cooling system consists of: 1 Air intake on the starter . 2 Fins on the fl ywheel. 3 Cooling fi ns on the cylinder . 4 Cylinder cov er (directs cold air ov er the cylinder). Clean the cooling system wit[...]

English – 19 MAINTENANCE Gear housing There is a grease nipple and a plug f or fi lling lubricant on the gear housing. Use a grease gun to fi ll with grease. This should be done after e very 60 working hours. Use Husqvarna’ s special grease, no . 503 98 96-01. CA UTION! The gear housing must not be fi lled completely with grease. The g rease[...]

20 – English MAINTENANCE Maintenance sc hedule The f ollowing is a list of the maintenance that must be perf or med on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and ser vice work described in this Operator’ s Manual. More e xtensive w ork must be carried out by an autho[...]

English – 21 TECHNICAL D A T A T echnical data Note 1: Noise emissions in the environment measured as sound power (L W A ) in conf ormity with EC directive 2000/14/EC . Note 2: Equivalent sound pressure le vel is calculated as the time-w eighted energy total f or sound pressure lev els under various working conditions with the follo wing time dis[...]

22 – English TECHNICAL D A T A ´®z+R(h¶6+¨ ´®z+R(h¶6+¨ EC-dec laration of conf ormity (Applies to Eur ope only) Husqvarna AB , SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare under sole responsibility that the hedge tr immers Husqvarna 323HD60, 325HD60 and 325HD75 from 2002’ s ser ial numbers and onwards (the y ear is clearly s[...]

[...]

´®z+R(h¶6+¨ 2005-05-31 ´®z+R(h¶6+¨ 1150087-26[...]