Honda Automobiles FS5047 manual

[...]

[...]

Thank you for purchasing an HTA attachment for your Honda Tractor. This manual covers the assembly, operation and maintenance of the HTA Model FS5047 Rotary Broom. For your convenience, a parts guide is also included in this publication. I NOTE: The information in this publication is based on the latest ,product information available at the time of[...]

TABLE OF CONTENTS Contents Page ASSEMBLY Step 1: Preparation ............................................. Step 2: Attaching broom to tractor ............................. Step 3: Optional dolly wheels installation ...................... OPERATION Operating controls .............................................. 9 Adjustments ......................[...]

L SAFETY PRECAUTIONS THE FOLLOWING PRECAUTIONS ARE SUGGESTED TO HELP PREVENT ACCIDENTS - A CAREFUL OPERATOR IS THE BEST OPERATOR - MOST ACCIDENTS CAN BE AVOIDED BY OBSERVING CERTAIN PRECAUTIONS. READ AND TAKE THE FOLUlWING PRECAUTIONS BEFORE OPERATING THIS TRACTOR AND ROTARY BROOM TO HELP PREVENT ACCIDENTS. EQUIPMENT SHOULD BE OPERATED ONLY BY I TH[...]

SAFETY PRECAU!CIONS (Continued) OPERATING 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11 . 12. 13. Always use caution when operating to avoid possible injury. Do not put hands or feet near rotating parts. Keep clear of discharge opening at all times. Exercise extreme caution when operating on or crossing a gravel drive, walk or road. Stay alert for the hidden h[...]

SAFETY DECALS REPLACE IMUEDIATELY IF DAMAGED A MISE EN GARDE 1 . (CANADA ONLY) I ROTATING DRlVELfNE KEEP AWAY! CONTACI CAN CAUSl DtAIH 00 NOT OPERATE WITHOUT - I I 8 ALL DRIVLLINE. TRACTOR AND 0 DRIVELINES SECURELY EOUIPYENT SHIELDS IN PLACE DRIVELINE SHIELDS THAT TURN ATTACHED AT BOTH ENDS FREELY ON DRIVELINE I 2. (U.S.A. ONLY) ROTATING DRIVELINE [...]

ASSmBLY' NOTE: Before mounting this rotary broom on your tractor,. your tractor must be equipped with an HTA Model QH5000 Quick Hitch. -1 : Before beginning assembly of this subf rame, please read the instructions through completely and familiarize yourself with all the parts. After completing assembly, torque all bolts according to the torque[...]

STEP 2: ATTACHING BRoon TO TRACTOR a) Insert driveline half (with quick connect yoke) over broom driveline half. Set driveline on its support. NOTE: Driveline sliding surfaces must be greased. b) Insert male quick hitch (fig.3, item 1) into broom female hitch (fig.3, item 2) and place male quick hitch lever (fig.3, item 3) fully forward in " l[...]

ASSEMBLY I STEP 3: OPTIONAL CASTER WHEEL INSTALLATION I NOTICE ] Caster wheels are required for lawn thatching and to prevent gouging . a) b) Remove pin (fig .5, item 1 ) and hairpin from each caster wheel (fig.5, item 3). Select desired number of spacer sleeves (fig.5, item 2) to remain on bottom portion of caster wheel (see application page 10) .[...]

OPERATION OPERATING CONTROLS 1 . RAISING AND LOWERING THE ROTARY BROOM LOCK Refer to 'control' section of quick hitch operator's manual (HTA Model QH5000) page 5. 2- STARTING AND STOPPING THE ROTARY BROW Refer to tractor operator's manual for proper front I'PTO" operation. ADJUSTMENTS (FIGURE 1 1 Before making any adju[...]

OPERATION (continued) OPERATING THE ROTARY BROOM APPLICATIONS: 0 SNOW REMOVAL 1 . Read the operator's manual carefully. Be thoroughly familiar with the controls and proper use of the equipment. may be thrown farther than the snow. Use slowest brush speed that will perform the job. Stay aware of broom discharge direction. 2. Do not allow anyone[...]

I MAINTENANCE MAINTENANCE SERVICE AND STORAGE 1. Never store the tractor with fuel in the fuel tank inside a building where open flames or sparks are present. Allow the engine to cool before storing in any enclosure. 2. Avoid exposing .broom bristles to direct sunlight for long periods. Long exposure to direct sunlight will damage the bristles . 3.[...]

MAINTENANCE BRUSH REPLACD4ENT a) Stop tractor engine, set parking brake and remove ignition key. b) Remove the 1 /211 x 1 3/4" bolt (fig.1 , item 1 ) from each broom side plate (f ig.1 , item 2) and remove the eight bolts (fig.1 , item 3) which secures each side plate to broom housing. c) Remove broom side plates with retainer cups (fig.2, ite[...]

Set broom in transport position. Stop tractor engine, set parking brake and remove ignition key. Set broom storage stands in most extended position so that stands extends the broom bristles. Remove hair pin ( f ig.1 , item 1 ) from welded sleeve on right hand side of broom mounting bracket. Set pin (fig.1, item 2) in the inmost position (you may ha[...]

I PARTS GUIDE FRONT ROTARY BROOM (47 " MODEL) 65 OM 0180 14[...]

c PARTS GUIDE FRONT ROTARY BROOM (47 " MODEL) ........................................................................ ........................................................................ REF DESCRIPTION QTY ........................................................................ ............................................................[...]

PARTS GUIDE FRONT ROTARY BROOM (continued) ........................................................................ ........................................................................ REF DESCRIPTION QTY ........................................................................ ....................................................................[...]

PARTS GUIDE FRONT WHEEL ........................................................................ ........................................................................ REF DESCRIPTION QTY ........................................................................ ........................................................................ I 1 2 3 4 5 6 [...]

1 Support plate .............................................. 1 2 Clevis ..................................................... 2 3 Chain ...................................................... 1 4 Pin (2.5mm dia x 40mm, hair) ............................... 1 5 Anchor plate ............................................... 1 7 Washer (5/16", loc[...]

PARTS GUIDE WORM GEAR BOX ........................................................................ ........................................................................ REF DESCRIPTION QTY ........................................................................ ........................................................................ 1 2 3 4 5 6 [...]

PARTS GUIDE 1 Inner shield ............................................... 1 2 Nylon bearing .............................................. 1 3 Bearing retainer ........................................... 1 4 Yoke and female shaft ...................................... 1 5 Double yoke (joint C.V.) ................................... 1 6 Yoke 1"[...]

I PARTS GUIDE Driveline male portion assembly ............................ 1 Quick connect yoke assembly ................................ 1 Spring lock yoke repair kit ................................ 1 Universal joint kit ........................................ Yoke and male shaft assembly ............................... 1 Bearing retainer ......[...]

PARTS GUIDE OPTIONAL DOLLY WHEELS ........................................................................ ........................................................................ REF DESCRIPTION QTY ........................................................................ ........................................................................ 1 2 [...]

T GENERAL TORQUE SPECIFICATION TABLE (Revised 2 - 74) USE THE FOLLOWING TORQUES WHEN SPECIAL TORQUES ARE NOT GIVEN TORQUE SPECIFICATION TABLE NOTE: These values apply to fasteners as received from supplier. dry, or when lubricated with normal engine oil. They do not apply if special graphiced or moly dirulphida greaser or other ex - treme pressure [...]

[...]

I WARRANTY SERVICE Your satisfaction and goodwill are important to your dealer and to us. All Honda warranty details are explained in the Distributor's Limited Warranty. Normally, any problems concerning the product will be handled by your dealer's service department. If you have a warranty problem that has not been handled to your satisf[...]

3839339 (9106) Printed in Canada[...]