HiFi Works 811-TK5M91-031 manual

SIZE: 148 x 210mm 20 CD HOME STEREO SYSTEM INSTRUCTION MANUAL 811- TK5M91-031[...]

- 1 - PRECA UTIONS Follow the advice below for safe and appropriate operations. Placement • Do not use the unit in places which are e xtremely hot, cold, dusty , or humid. • Place the unit on a flat and even surface. • Do not restr ict the air flow of the unit by placing it in a place with poor air flo w , by co vering it with a cloth, or by [...]

- 2 - Important Safety Instructions (F Important Safety Instructions (F Important Safety Instructions (F Important Safety Instructions (F Important Safety Instructions (F or USA) or USA) or USA) or USA) or USA) 1 . Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2 . Retain Instructions [...]

- 3 - Important Switch off the power before connecting speakers and other equipment. Speaker Cord Connections Connect the Red wires to the Red (+) terminals and the Black wires to the Black (-) terminals Note: Connecting speakers other than the speakers supplied with the unit, may damage the unit. SYSTEM CONNECTIONS SPEAKER TERMINAL S IMPEDANCE : 6[...]

- 4 - Power cord Connection 1. Make sure that all the components and speakers are connected correctly. Caution • Be sure the AC power cord is disconnected and all functions are off before making connections. • When you are not going to use the unit for a long period of time, disconnect the AC power cord. SYSTEM CONNECTIONS To external Source AC[...]

- 5 - P P P P P ARTS IDENTIFICA ARTS IDENTIFICA ARTS IDENTIFICA ARTS IDENTIFICA ARTS IDENTIFICA TIONS TIONS TIONS TIONS TIONS 1 ) DISPLAY 2 ) CD DOOR 3 ) SKIP/SEARCH buttons 4 ) MULTI-JOG/DISC SKIP control 5 ) STANDBY indicator 6 ) FUNCTION button 7 ) PHONES socket 8 ) STANDBY/ON button 9 ) HIGH SPEED DUBBING button 1 0 ) Cassette holder ( Deck A) [...]

- 6 - REMO TE CONTROL 1 ) FUNCTION button 2) PLAY/PAUSE button 3) STOP button 4) RANDOM button 5) REPEAT button 6) SKIP button 7) DIMMER 8) VOL – button 9) SKIP button 1 0 ) Number (0-9) and (+10) buttons 11 ) MEMORY button 1 2 ) FM MODE button 1 3 ) STANDBY/ON button 1 4 ) SOUND button 15 ) SLEEP button 1 6 ) TIMER button 1 7 ) VOL + button 1 8 [...]

- 7 - ADJUSTING THE SOUND TO USE THE X-BASS Press the SOUND mode button repeatedly, so that "X-BASS" appears on the display window. Rotate the MULTI-JOG the control to select the level 1, 2 or off. TO ADJUST THE VOLUME Rotate the VOLUME knob to adjust the sound. X-BASS is designed specifically to boost the low frequency sound to obtain a [...]

- 8 - SETTING THE CLOCK Notes: • The clock starts operating from “0” seconds. (Seconds are not displayed.) • In the event of a power failure or when the AC power lead is disconnected, the clock display will go out. When the AC power supply is restored, the clock display will flash on and off to indicate the time when the power failure occur[...]

- 9 - SLEEP OPERATION The tuner, CD, tape and AUX can all be turned off automatically. 1. Select the desired sound source. 2 . Press the TIMER/SLEEP button, so that “SLEEP” is displayed. 3. To change the sleep time: Sleep time will initially be 90 minutes. Sleep selection (Rotate MULTI-JOG) control to change minutes 240, 210, 180, 150, 120, 90,[...]

- 10 - AM Connect the loop aerial (provided) to the 'AM LOOP aerial' snap terminals at the back of the unit. FM Fully unwind the wire aerial. Then extend the wire aerial and place it in the position that receives best reception. NOTE: Do not connect to an outside aerial. FOR BETTER RECEPTION TUNING INT O A ST A TION MANU ALL Y The system [...]

- 11 - PRESETTING ST A TIONS 1. Press the FUNCTION button to TUNER. 2. Press the STOP/BAND button to select the desired band and tune to the required station. 5. Press the MEMORY button to store the station. Repeat steps 2-5 to set other preset station. Notes: • When the total memory of current band is full and try to store the current station in[...]

- 12 - 2 . Press FUNCTION repeatedly until " 20 CD" appears. 3 . Open the CD door by pushing the top right edge of the cover. 4 . Rotate the DISC SKIP control to turn the tray . Place other disc(s) in the disc holder(s). And turn to select disc number. COMP A CT DISC OPERA TION D O W N U P M U L T I - J O G D I S C S K I P PUSH OP EN 5. I[...]

- 13 - LOCATING A PARTICULAR POINT IN A TRACK Note : Searching and skipping can be done during playback or pause stage but are effective for the currently selected disc only. Use DISC SKIP button to choose another disc. COMP A CT DISC OPERA TION Keep it pressed A specific track directly Press the numbered buttons to enter the track number. Example:[...]

- 14 - COMP A CT DISC OPERA TION 2. Press the numbered buttons 1- 20 or SKIP/SEARCH button to select which disc for playback. PROGRAMME PLAYBACK --- in the stop mode You can play back the tracks on the CDs in the disc 1-20 positions in any order desired. By specifying the disc numbers from 1 to 20 and the tracks numbers from 1 to 99. A program of u[...]

- 15 - 1. Press the FUNCTION button to TAPE. 2. Press the STOP/EJECT button and load a cassette into the cas- sette compartment of Deck A or Deck B. 4. Press the PAUSE button. 2. Insert a cassette in each deck. If you press play on both deck A and deck B sound will only come from the tape in deck B. CONTINUOUS PLA YB A CK ---- FROM DECK B T O DECK [...]

- 16 - 1. Cassette tapes have two erase-protection tabs - one for each side. To protect a record- ing from being accidentally recorded over or erased, use a screwdriver to remove one or both of the cassette tape's erase-protection tabs. 2. If you want to record on a tape side after you have removed the erase protection tab, place a piece of st[...]

- 17 - 2. Insert a tape into the cassette compart- ment. 4. Press the PLAY/PAUSE button of the CD player. RECORDING ---- DECK A ONL Y TO ERASE A RECORDED TAPE 1 . Press the FUNCTION button to TAPE. 2 . Insert a tape with the side you want to erase facing you. 3 . Press the RECORD button to start erasing. RECORDING FROM THE CD PLAYER 1. Press the FU[...]

- 18 - CAUSE (AND REMEDY) • Press the VOLUME UP button. • The headphones are connected. Disconnect them. • Reset the unit by pressing the Power/Standby switch. • Suddenly OFF when playing, the SLEEP function is activated. • Make sure you have inserted the disc into each slot at facing right angle to the rotary table. • Check the speaker[...]

- 19 - Power consumption 8 6 W Power requirements AC ~ 100V 50/60Hz (Japan) AC ~ 110V/120 - 220/240 50/60Hz (Other countries) AC ~ 120V 60Hz (USA and Canada) AC ~ 220V 50Hz (Hong Kong and China) AC ~ 230-240V 50Hz (Europe) AC ~ 240V 50Hz (Australia) Specifications and external appearance are subject to change without advance notice due to continuou[...]