Hi-Touch Imaging Technologies Mug Heat Press Kit manual

HiT i Photo Printer Mug Heat Press Kit User Manual[...]

ACKNOWLEDGEMENTS Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsof t Corporations. Pentium is a U.S. registered tr ademark of Intel Corporation. T rueT ype is a U.S. trademark of Apple Computer , Inc. Adobe and Acrobat a registered trademar ks of Adobe Systems Incorporated. Brands and product names ar e trademarks or regist er[...]

SAFETY INSTRUCTIONS 1. Read thes e instructions carefully . Save these instructions for future reference. Follow all warnings and instructions marked on the product. 2. Unplug this product from the wall out let before cleaning. Do not use liquid cleaners or aerosol cleaners. Us e a damp cloth for cleaning. 3. Do not use this product near water . 4.[...]

installation. If these equipment doses cause harmful interference to radio or television reception, which can be determi ned by interference by on or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver . 3. Never push objects of any kind into these products thr[...]

[...]

[...]

Chapter 1. W elcome 1-1 Our Invit ation to HiT i Photo Printer Family It is our pleasure to have you onboard as the member of HiT i Photo Printer family . W e thank you for your patronage and hope this is just the beginning of our long-term ssociation. Through our prin ter , picture will be transformed into masterpieces. HiT i Photo Printer of fers[...]

2-2 Other Features  Professional Locating coil design ,accurate for locating.Dual temperature sensor and plastic cover design, secure and accurate for useAutomatic power-off design while abnormal activities appearBundled software , MugDesiree ,to provide solution for Mug personalization[...]

Chapter 2 MugDesiree Introduction 2-1. Mug Desiree Installation: T o I n s t a l l : 1. Insert MugDesiree CD into CD-ROM 2. If CD-ROM does not auto start, please click S tart/Run and type D:SETUP .EXE (where “D” is your CD-ROM drive.) 3. Click OK. Follow the instructions on the screen. To start : 1. Click S tart/Programs. Go to the HiT i folde[...]

2-2. Operation Procedure 1. Select S tartProgram esHiT iHiT iHitiMug M ugDesiree or double-click to run MugDesiree 2. Press button and import the images from computer 3. Press button and import images from HiT i printer 4. Press button and import templates from computer . Y ou can edit the template format such as rotate , color setting as the [...]

（ a ） 99mm x 74mm （ b ） 120mm x 74mm （ c ） 51.5mm x 74mm Or you can edit your own layout format as in illustration (d) (d) 8. After picking desire print layout, press button to import the image/templates into designated picturing area. 9. The edit area is composed of three di fferent layers, image , template and text layer, which could [...]

—Text layer 10. Use , , and buttons to adjust the size of the image /template within picturing area. Fits the image /template vertically to the height. Fits the image /template horizont ally to the width. Prompts an image/template size window for user to custom defines width, length, and pixel. 11. Use and buttons to adjust the color effect Chang[...]

---Portrait, this will enhance the imprinted people image on the mug. ---Landscape, this will increase the color saturation imprinted on the mug. ---Artistic, this will double the color saturation imprinted on the mug. "Artisitc' effect is good if image is text or logo. ---Normal, the imprinted image on the m ug is the same as the origina[...]

Chapter 3 Mug Heat Press S t andard Operation Procedure 1. Y ou should have the following tool s in hand: Mug Heat Press, Bubble Eliminator , White Ceramic Mug, Mug Locating T ape, Dye Sublimation Photograph, Mug Locating Coil, Clean T o wel (recommend polyester fabric),a pair of gloves and a bottle of methane, 2. Pour an equivalent of 1 teaspoon o[...]

Useful T ip s: (1). Carefully cutting off excessive margin on top of photography (2). Place mug inside lo cating coil.The bottom of the mug should be in p arallel with locating coil (3). Left and right side of photograph should be in p arallel with the edge of locating coil (4). A void any gap between mug and photography 4. Wrap the Dye Sublimation[...]

Useful T ip s: (1). Ensure no gap between photography and mug while using bubble eliminator to squeeze out air pocket (2). T ape the mug when bubble eliminator (3). Use finger to press the wrinkle while wrinkle appears during air pocket removing. 8. Use mug locating tape to secure anot her side of the photo onto the mug’ s surface. 9. Hold on the[...]

11. Flip down the plastic cover 12. Select <RUN> and press OK, an the default setting would be applied for the heating process (the default pre-heat ing time/temperature is 1 min/ 130 o C and the default heating time/temperature is 4 min/ 150 o C) Y ou can also select <Setting> , to adjust pr e-heating time/ pre-heat ing temperature/ he[...]

14. Push the adjustor to tight on the mug against the plastic roller . With hand holding the mug holder , rotate the mug counter-clockwise and clockwise to squeeze any air between the mug and the photo. Useful T ip s: (1). S t art to bubble elimination process immediately after pre-heating process in order to have the best result (2). S t art from [...]

18. W ait until the temperature of m ug cools down, then remove the mug locating tape. Useful T ip s: (1). Peel the photo off immediately while heating completed, can get ultimate output. (2). A void burning from touching, please wear glove. (3). A void double-image, don’t stick the photo on the mug again. (4). A photo only can transfer one Mug 1[...]

Chapter 4 Consumable Replacement 4-1 Heater Plate Replacement 1 T urn off the power and wait for 20 minutes for machine to cool down 2 T ake out the white teflon and black rubber 3. Pull the heater plate fr om machine, you will see a semi- sphere hole where a wire is connecting with heater plate. Semi-sphere hole 4. Disconnect the heater pl ate fro[...]

5. Make sure the wire and the new heater plate is properly reconnected. 6. Put the connector through the semi -sphere hole and put the heater plate into the original location. Then put the black rubber and white T eflon onto the machine. Make sure the heater plate , bla ck rubber and white silicon are wrapped by white T eflon. Then push the white T[...]

4-2. Teflon Replacement // The white T eflon on the surface of the heat er plate is used for improving the image transferring ef fect onto the mug. If you f i nd any cracks on t he surf ace of the T eflon, please contact your local distributor and replace the T eflon according to the following procedure. // 1. T ake out the cracked T eflon. 2. Use [...]

Cover the w hite, orange and b lack com ponents. 5. Insert the T eflon into the embr acer as the following illustration. Push it 6. The new T eflon replacement is completed.[...]

Chapter 5 Useful tip s for Mug Heat Machine Maintenance Erros Message displays on LCD Action T aken COVER OPEN Flip down the plastic cover and press OK OVER HEAT Press OK and turn off the power first and then turn it back on ADC FAILS 1. T urn off the power first and then turn it back on 2. Check if the connection is loose between heating p ad and [...]