Heat & Glo LifeStyle ESCAPE-I35-C manual

1 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Models: ESCAPE-I35-C ESCAPE-I35LP-C ESCAPE-I30-C ESCAPE-I30LP-C • DO NOT store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance. • What to do if you smell gas - DO NOT try to light any appliance. - DO NOT touch a[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 2 Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on fi replace: _____________________ Dealership purchased from: ____[...]

3 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUTION! Indicates a hazardous si[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 4 B. Limited Lifetime W arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal an[...]

5 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 B. Limited Lifetime W arranty (continued) 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS:  7KLVZDUUDQWRQOFRYHUV++7DSSOLDQFHVWKDWDUHSXUFKDVHGW KURXJKDQ++7 DXWKRUL]HGGHDOHURUGLVWULEXWRU  $ OLVWRI ++7?[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 6 C. BTU Speci fi cations MODELS: ESCAPE-I30-C, ESCAPE-I30LP-C, ESCAPE-I35-C, ESCAPE-I35LP-C LABORA TOR Y : Underwriters Laboratories, Inc. (UL) TYPE: V ented Gas Appliance Heaters STANDARD: ANSI Z21.88-2009 • CSA 2.33-2009 This product is listed to ANSI standards for ?[...]

7 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 2 2 Operat ing Instruc tions Figure 2.1 General Operating Parts B. Y our Fireplace W ARNING! DO NOT operate fi replace before read- ing and understanding operating instructions. Failure to operate fi replace according to operating instructions could cause fi re or inju[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 8 D. Clear Space W ARNING! DO NOT place combustible objects in front of the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these objects. Figure [...]

9 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 H. IPI Battery T ray/Battery Installation The IntelliFire Plus TM system has a battery backup option. Battery longevity and performance will be affected by the service temperatures of this appliance. NOTICE: Batteries should only be used as a power source in the event of [...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 10 J. Before Lighting Fireplace Before operating this fi replace for the fi rst time, have a quali fi ed technician: • V erify all shipping materials have been removed from inside and/or underneath the fi rebox. • Review proper placement of logs, ember material and/[...]

11 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 K. Lighting Instructions (IPI) 1. This appliance is equipped with an ignition device which automatically lights the burner. DO NOT try to light the burner by hand. 2. Wait fi ve (5) minutes to clear out any gas. Then smell for gas, including near the fl oor. If you sme[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 12 Initial Break-in Procedure • The appliance should be run three to four hours continuously on high. • T urn the appliance off and allow it to completely cool. • Remove fi xed glass assembly . See Section 12.I. • Clean fi xed glass assembly . See Section 3. • R[...]

13 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Glass Cleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle fi xed glass assembly with care. Glass is breakable. • Avoid striking, scratching or slamming glass • Avoid ab[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 14 V enting Frequency: Seasonally By: Homeowner T ools needed: Protective gloves and safety glasses. • Inspect venting and termination cap for blockage or obstruction such plants, bird nests, leaves, snow , debris, etc. • V erify termination cap clearance to subsequent [...]

15 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Figure 3.1 IPI Pilot Flame Patterns Burner Ignition and Operation Frequency: Annually By: Service T echnician T ools needed: Protective gloves, vacuum cleaner , whisk broom, fl ashlight, voltmeter , indexed drill bit set, and a manometer . • V erify burner is properly[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 16 A. T ypical Appliance System NOTICE: Illustrations and photos re fl ect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual VERTICAL TERMINA TION CAP (SECTION 8.E) VENT P[...]

17 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 B. Design and Installation Considerations Heat & Glo gas inserts are designed for installations into solid fuel masonry or factory built fi replaces that have been installed in accordance with the National, Provin- cial, State and local building codes. Fireplaces ar[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 18 5 5 F ireplace Size Requirements A. Minimum Fireplace Opening Minimum fi replace opening requirements are shown in Figure 5.2. W ARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access. Due to high temperatures, the appliance[...]

19 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Figure 5.2 Fireplace Opening In addition to these dimensions, also reference Clearances and Mantel Projections (Section 5.B). E FRONT VIEW D C F A TOP VIEW B G** H MINIMUM FIREPLACE SIZE Location ESCAPE-I35-C ESCAPE-I35LP-C ESCAPE-I30-C ESCAPE-I30LP-C Inches Millimeters [...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 20 B. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as speci fi ed. Framing or fi nishing material closer than the minimums listed must be construct- ed entirely of noncombustible materials (i.e., steel studs, co[...]

21 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 A. V ent T ermination Minimum Clearances Roof Pitch H (Min.) Ft. Flat to 6/12...........................................................1.0* Over 6/12 to 7/12 .................................................1.25* Over 7/12 to 8/12 .......................................[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 22 7 7 Installation Preparation Prepare the existing solid fuel masonry or factory built non-combustible fi rebox for installation. A. Inspection and Cleaning Prior to installing the gas insert: • Have the chimney and adjacent structure inspected and cleaned by quali fi[...]

23 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 B. V enting Components CAUTION! Risk of Cuts/Abrasions/Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. The vertical vent termination system installed on this model includes: • One 3-foot section stainless ste[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 24 C. Connecting V ent Pipe Reference instructions in the termination kit. • Install the 3-inch fl exible vent pipe(s) down through the chimney . • Secure the exhaust fl exible vent pipe to the 3 foot section stainless steel flexible vent pipe using the factory- insta[...]

25 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 W ARNING! Risk of Fire! Only an approved Hearth & Home T echnologies surround may be used to cover inte- gral grills on solid fuel burning fi replaces. No other com- ponents such as shrouds, sheetmetal plates, etc., may be used to seal off vents. W ARNING! Risk of E[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 26 E. Installing Adaptor and T ermination Cap CAUTION! Risk of Cuts/Abrasions/Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. For installation of termination cap see minimum vent heights for various pitched roofs [...]

27 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 A. Fuel Conversion • Make sure the appliance is compatible with available gas types. • Conversions must be made by a quali fi ed technician (NFI certi fi ed or factory-trained) using Hearth & Home T echnologies speci fi ed and approved parts. B. Gas Pressure ?[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 28 A. Wiring Requirements NOTICE: This appliance must be electrically wired and grounded in accordance with local codes or , in the absence of local codes, with National Electric Code ANSI/NFP A 70-latest edition or the Canadian Electric Code CSA C22.1. • This appliance c[...]

29 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 E. Optional Accessories T o connect optional accessories, the supplied cord as- sembly should be used. See Figures 10.2 and 10.3 for optional accessories. W ARNING! Risk of Shock! Label all wires prior to dis- connection when servicing controls. Wiring errors can cause i[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 30 Figure 10.3 Fan Wiring Diagram Note: if any of the original wire as supplied with the applianc e must be replaced, it mus t be replaced with t ype 105 °C r ated wire. BLK RED BRN ORANGE - TO V AL VE GROUND - TO V AL VE BRACKET GREEN - TO V AL VE PLUG INTO EXISTING OUTLE[...]

31 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 A. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as speci fi ed. Framing or fi nishing material closer than the minimums listed must be construct- ed entirely of noncombustible materials (i.e., steel studs, co[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 32 A. Remove Glass Assembly See Section 12.I. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the fi rebox. Remove metal panels covering electrical compo- nents on sides of appliance. C. Inspect Firebox Surface cracking or crazing of ?[...]

33 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 G. Ember Placement W ARNING! Risk of Explosion! Follow ember placement instructions in manual. DO NOT place embers directly over burner ports. Replace ember material annually . Improperly placed embers interfere with proper burner operation. Ember material is shipped wit[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 34 H. Install the Log Assembly Log Set Assembly: LOGS-I30FB Models: ESCAPE-I30-C, ESCAPE-I30FB CAUTION: Logs are fragile, handle with care. Figure 1. Log Set Installed Figure 2. Reference Points PILOT PILOT BRACKET BRACKET GRA TE TINES GRA TE TINES BURNER LEDGE BURNER LEDGE[...]

35 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Log #3 (SRV2201-704) : See Figure 2 for additional details. Locate the log slot on the bottom right end of Log #3. Mate the log slot with the left log pin. Rotate the left end of the log counterclockwise, until it contacts the grate tine. Log #4 (SRV2201-705) : See Figur[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 36 2201-935E Figure 8. Place Log #5 Figure 9. Place Log #6 GLASS ROCK (2201-853): Once Log #3 and Log #4 are installed, fi ll each light tray with the glass rock. See Figure 7. W ARNING! Risk of Explosion! DO NOT place glass rock on the burner surface. DO NOT place glass r[...]

37 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 H. Install the Log Assembly Log Set Assembly: LOGS-I35FB Models: ESCAPE-I35FB, ESCAPE-I35FB-LP ESCAPE-I35-C, ESCAPE-I35LP-C CAUTION: Logs are fragile, handle with care. Figure 1. Log Set Installed Figure 2. Reference Points PILOT BRACKET PILOT BRACKET GRA TE GRA TE BAR B[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 38 Log #3 (SRV2202-704) : See Figure 2 for additional reference details. Locate the log slot on the bottom right end of Log #3. Mate the log slot with the left log pin. Rotate the left end of the log counterclockwise, until it contacts the grate tine. Log #4 (SRV2202-703) :[...]

39 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 2202-935D Figure 8. Place Log #5 Figure 9. Place Log #6 Log #5 (SRV2202-705): See Figures 2 and 3 for additional references. Place the thick end of Log #5 on the fl at spot of Log #1. Locate the groove on the thin end of the log. Mate the groove with the grate bar as sh[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 40 J. Air Shutter Setting Air shutter settings should be adjusted by a quali fi ed ser- vice technician at the time of installation. The air shutter is set at the factory for minimum vertical vent run. Adjust air shutter for longer vertical runs. See Figure 12.3. NOTICE: I[...]

41 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 1 3 13 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a quali fi ed technician in the diagnosis of a problem and [...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 42 T roubleshooting (continued) Symptom Possible Cause Corrective Action 4. Pilot lights but con- tinues to spark, and main burner will not ignite. (If the pilot continues to spark after the pilot fl ame has been lit, fl ame recti fi cation has not occurred.) A. A shorte[...]

43 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 1 4 14 Reference Materials A. Appliance Dimension Diagram Dimensions are actual appliance dimensions. Use for reference only. Figure 14.1 Appliance Dimensions A B C D E F H L M R S H O Q P N K J I MODEL DIMENSIONS Location Escape-I35-C ESCAPE-I35LP-C ESCAPE-I30-C ESCAPE-[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 44 B. V ent Kits Components Direct V ent Flex Liner Kits (see Figure 14.2) LINK-DV30B: Masonry 3 inch fl ex liner kit. Expands to 30 feet. Includes: two liners, termination cap, fl ashing, and link adapter . LINK-DV4-30B: Masonry 3 inch fl ex liner kit. Expands to 30 fee[...]

45 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 C. Service Parts ESCAPE-I30-C Beginning Manufacturing Date: Aug 201 1 Ending Manufacturing Date: ______ 30” FireBrick Insert Log Set Assembly IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model [...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 46 C. Service Parts ESCAPE-I35-C Beginning Manufacturing Date: Aug 201 1 Ending Manufacturing Date: ______ 35” FireBrick Insert IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial[...]

47 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 C. Service Parts ESCAPE-I30-C, ESCAPE-I35-C Beginning Manufacturing Date: Aug 201 1 Ending Manufacturing Date: ______ #15 V alve Assembly 14.2 14.3 14.4 14.6 14.5 14.7 14.8 14.9 14.10 14.1 1 14.12 14.13 14.14 14.15 14.16 14.17 14.1 IMPORT ANT : THIS IS DA TED INFORMA TIO[...]

Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 48 C. Service Parts ESCAPE-I30-C, ESCAPE-I35-C IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer [...]

49 Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev . H • 5/12 Heat & Glo, a brand of Hearth & Home T echnologies Inc. 7571 215 th Street West, Lakeville, MN 55044 www .heatnglo.com D. Contact Information Please contact your Heat & Glo dealer with any questions or concerns. For the location of your nearest Heat & Glo[...]