Hayter Mowers 100E manual

Original V ersion (EN) ISSUE: 14.06.1 1 P ART NUMBER: 1 1 1-5099 (A) OWNER’S HANDBOOK Envoy 36 CODE 100E[...]

3 2 CONTENTS Contents 2 Introduction 3 Specications / Main Features 4 Safety Precautions 5 - 6 - Safety Alert Symbol 5 - T raining 5 - Preparation 5 - Safety Symbols 5 - 6 - Operation 5 - 6 - Maintenance & Storage 6 - Control Symbols 6 Assembling the Mower Befor e First Use 7 - Delivery Checklist 7 - Handlebar 7 - Grassbag Attachment 7 - Sup[...]

3 INTRODUCTION Thank you for purchasing a Hayter mower . The following pages are designed to help you gain safe and efcient service from your machine. IMPOR T ANT : This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety , operation, maintenance and specica - tions. Read and [...]

5 4 SPECIFICA TIONS / MAIN FEA TURES 2 6 4 3 1 1 11 8 1 7 9 10 5 Code 100 Motor Supply 230V Rated Input 1.4 kW Cutterblade Speed 2950 rpm Fuse Rating 13A Cutting width 360 mm Cutting height 13 - 60 mm Overall dimensions 1040 x 450 x 1360 mm W eight 22 Kg 1. Handlebar Securing Knob. 2. Cable. 3. Switch Control Unit. 4. Bail Arm. 5. Handlebar . 6. Ca[...]

5 SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury . Carefully r ead the following and inform others. Y our mower is perfectly safe if used correctly . Failure to observe the following precautions may r esult in serious injury . T rain[...]

7 6 SAFETY PRECAUTIONS Operation cont Always be sure of your footing on slopes. W alk, never run. Do not mow excessively steep slopes of more than 20 O and mow across the face of slopes, never up and down. Exercise extreme caution when changing direction. Use extreme caution when reversing or pulling the mower towards you. Switch off, if the mower [...]

7 Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly . If any items are missing, contact your local Hayter dealer . 1. Motor Handbook. 5. W arranty Reg Card. 2. Grassbag Frame. 6. Supply Cable. 3. Grassbag T op Cover . 7. Parts list/D of C. 4. Grassbag Fabric. T o prevent accidents[...]

8 9 Fig. 5 Fig. 6 Fig. 7 Fig. 8 OPERA TING THE MOWER Electrical Connection Position the mower on the grass area to be cut. Care- fully uncoil the supply cable clear of the mower . Ensure that the mains socket is switch ‘OFF’ before connecting. Switch ‘ON’. Note: W e recommend the use of a RCCB unit. refer to the ‘Safety Precautions - Prep[...]

9 Heavy Growth Areas of heavy growth should be mown without collecting the clippings. If collection is required, rst mow the area without the grassbag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the maximum height of cut setting with the grassbag tted. Reduce the height of cut and mow th[...]

10 11 MAINTENANCE SCHEDULE / MOWER MAINTENANCE Maintenance Schedule Follow the hourly or calendar intervals, whichever occurs rst. More frequent service will be required if working for prolonged periods under dusty , dry conditions, when airborne debris is present or after extensive operation cutting tall, dry grass. Daily - Clean grass debris f[...]

11 Cutterblade Removal cont Replace the cutterblade every 2 years or sooner or excessively worn or damaged. T o prevent injury it is wise to seek assistance when turning the mower on its side. Cutterblade Sharpening A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. Sharpen the cutterblade[...]

12 13 January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly . Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary . March The yearly lawn work programme really starts this month. As soon as[...]

13 TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION Motor fails to start 1. Mains supply socket dead 2. RCCB tripped 3. Plug pulled out of mains socket 4. Fuse failure 5. Supply cable damaged 6.Cutterblade obstructed 1. T est socket by plugging in another appliance 2. Remove mower plug and check RCCB action. Check the supply cable for any obvious [...]

15 14 W ARRANTY LIMITED W ARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material or workmanship under normal use for a period of two years from the date of purchase. T o qualify for the full benefit of the warranty , the warranty registration card must be returned to Hayter Limited withi[...]

15 NOTES NOTES[...]

16 Date of Sale:- Y our Local Dealer:- CODE SERIAL NO. Motor T ype:- DEALER ST AMP 1st Y ear (12 months ) We certify t hat this service h as been carried out by an Authorised Hayter Service Dealer Date: 1st Y ear (12 months ) Owner ’s Name : Serial Number: Date: 2nd Y ear (24 months ) We certify t hat this service has been carried out by an Autho[...]