Hawking HNC700PT manual

1[...]

Trademarks & Copyright Windows 95/98/ME and Windows NT/2000/XP are regist ered trademarks of Mi crosoft Corp. All other brands and product name s are trademarks of their respective com panies. No part of this publicat ion may be reproduced in any form or by any means or used to make any deri vative (such as translation, transformation or adapta[...]

Before Using This Product 5 Package Contents 6 Installation Hardware Installation 7 Software Installation 8 Initial Access to the Camera C h e c k N e t w o r k S e t t i n g s 1 1 Add a Password for Security 11 How to Use This Camera A u t h e n t i c a t i o n 1 2 I n s t a l l i n g t h e P l u g - i n 1 3 Primary User’s Capabilities 14 Main S[...]

Appendix A. Troubleshooting 40 B. Frequently Asked Questions (FAQ) 41 C. URL Commands for the Network Cam era 43 D. How to View Your Camera via the Internet 51 E. Technical Specifications 57 4[...]

The network camera is not only a high performance web-equippe d camera, but also a flexible surveillance system. Therefore, please ensure that the operation of such devices is le gal in your area before installing this unit for surveillance. (Please note that in some instances, surveillance devices ma y be prohibited by law in y our country.) It is[...]

Unpack and Inspect Open the package and carefully remove all items. The com plete HNC700PT package consists of: • One HNC700PT Remote-Motion CCD Network Camera • One CD with software and installation utilities • One quick installation guide • One DC power adapter • One camera stand • One remote controller • One A/V cable Please check [...]

Hardware Installation Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and no t exceed 100 meters in length. Connect the power adapter jack to the Network Ca[...]

Software Installation In this manual, "User" refers to anyone who has access to the network camera, and "Adm inistr ator" refers to anyone who has access rights to configure the network camera and grant user access to it. At the end of the hardware installation, the Administrator mu st insert the CD included with the package int[...]

After completing the search, the main IP Setup window will app ear. The IP Setup program should have returned an IP address for your network camera (under the “Current IP Address” heading) that is consistent with your existing LAN settings. The IP address will likely have been found by the DHCP server. (A DHCP server provides IP addresses to cl[...]

If the IP address is not already being used by another devi ce on the network, IP Setup will continue with the setup. Otherwise, another message window will appear, warning that the assigned IP conflicts. In this case, adm inistrators should search for a vacant IP address or ask the network supervisor for assistance. If the setup is successful, cli[...]

Check Network Settings (even if the device is already connected) Although the network camera may already be connected following the software installation procedure, administrators should ensure that the network settings in the configuration page are correct, including the subnet mask, IP address of the gateway, and DNS. If necessary, ask the networ[...]

Authentication After opening the Web browser and typing in the networ k camera’s IP address, a dialogue window may appear, requesting a username and password, unless the administrator has not saved a password . Upon successful authentication, the device’s main page will be displayed. In the figure below, the foreground is the login window and t[...]

Installing the Plug-in In W indows, during the initial access to the network camera, the web browser may prompt you for permission to install a new plug-in for the network camera. Whether or not you are prompted to install the plug-in will depend on the Internet security settings of your PC or notebook. (At higher levels of security , the user may [...]

Primary User’ s Capabilities Main Screen with Camera V iew The main page layout has three parts: • Configuration functions : The camera can be configured via the user interfaces that can be obtained by clicking on the buttons in the red box on the left-hand side of the figure below. • Camera View : Displays what the camera sees (red box in th[...]

Configuration Contr ols Digital Output Click on the “On” or “Off” buttons to enable or disable the digital output. Client Settings Clicking on this button links you to the client setting pages. Please review the section that follows for more details. Configuration Only the Administrator can access camera configurations. Camera V iew The inf[...]

Client Settings At the initial access to the “Connection type” page in Windows, the web browser will ask for a new plug-in installation. This plug-in has been registered for certification and can be used to change the parameters at the client’s site. The user should click on to install the plug-in. If the web browser does not allow the user t[...]

The HTTP protocol must be selected if the network is protected by a firewall and it only allows HTTP Port (80) to be opened. In this mode, audio will not be sent and only video is operational. If there are no special requirements, the UDP protocol is recommended. Generally speaking, the clie nt’s preference should be in the following order: UDP ?[...]

Administrator’s Capabilities Configure for Optimal Performance Optimal performance m eans obtaining the fastest image refresh rate and highest video quality, while utilizing the lowest possible network bandwidth. Three factors in the “Vid eo” configuration page will control the performance: a. Maximum fram e rate, b. Fixe d bit rate, and c. F[...]

frame rate to 25 fps or 30 fps. If you are shooting fast-movi ng images, you ma y want to slow the maximum fram e rate down to 20 fps in order to lower the rate of data transmission. This allows for better video quality and the human eye cannot easily detect the differences between those of 20, 25, or 30 fram es per second. If your network bandwidt[...]

] ] ] ] 1 2 3 4 Building a Multimedia Web Attraction Site Demo on multiple sites – mid-scale service The network camera can allow for ten visitors to view it online simultaneously. After installation, focus the network camera on any object y ou choose, and tell the visitors to type in the IP address. Caution: You may want to maintain your visitor[...]

1. Click on “Configuration” on the homepage. 2. Click on “Security” in the left column. 3. Go to the bottom of the page and check “A llow more viewers with snapshot mode”. 4. Set the snapshot interval to refresh the still image automatically. The longer the snapshot interval, the better the snapshot mode works for multiple viewers. If y[...]

6. Select the day or days of the week in the “Week ly schedule” that y ou want to upload the pictures. 7. Select “Sequential operation” and set the interval. 8. Unselect "FTP put snapshots with date and time su ffix" as the upload method and click on "Save". 9. The image file uploaded to the web space is named “video.j[...]

1. Click on “Configuration” on the homepage. 2. Click on “Application” in the left column. 3. Check the weekdays as desired and give the period from "Snapshots begin" to "Snapshots end" to monitor the triggering conditions every day. 4. Check the “Event operation” box. The triggering condition can be set to detected [...]

13. Clicking on “Save” enables the activity display (the lined colu mn to the left of the “New” button). Green means the motion in the window is under the watermark (threshold) set by the Administrator and red m eans it is over the watermark (threshold). 14. Click on “Application” in the left colum n. 15. Check the m otion detection win[...]

Definitions in Configuration Only the Administrator can access system configuration. Each category in the left column will be explained in the following pages. The bold texts are the specific words/phr ases on the Option pages. The Administrator may type the URL below the figure to directly enter the frame page for conf iguration. To set certain op[...]

System Parameters Host name : The text displays the title at the top of the main page. Turn off the LED indicator : Check this option to shut off the LEDs. This can prevent the camera from being noticed. Keep current date and time : Click on this to keep the network camera’s cu rrent date and time. An internal real-time clock maintains the date a[...]

User Gr oup Administration Root password : Change the Administrator’s password by typing in th e new password identically in both text boxes. The typed entries will be displayed as asterisks for security purposes. After clicking , the web browser will ask the Administrator for the new password for access. Add user : Type the new user's name [...]

Network settings Any changes made on this page will restart the system in order to validate the changes. Make sure every field is entered correctly before clicking on . Reset IP address at next boot : The default status is checked to avoid err oneous entries during installation. Having to perform software installation whenever the network camera st[...]

proceed. If the passive mode is selected, the network camera can autom atically make an attempt for active mode, if the external FTP server does not support passive mode. 2nd FTP server : The domain name or IP address of the external FTP server. 2nd FTP user name : Assigned user name on the backup FTP server. 2nd FTP password : Assigned password on[...]

30[...]

V ideo Codec Parameters Text on video : The text will be displayed in the black bar above the video window with a timestamp. The timestam p is captured from the date and time of the network cam era th at is maintained by a built-in real-time clock. Color : Select either for color or monochrome video display. Size : There are three options for two v[...]

Motion Detection Enable motion detection : Check this option to turn on motion detection. Click on this button to add a new window. At most, three windows can exist simultaneously. Use the mouse to click, hold, and drag the window frame to resize it, or the title bar to m ove it. Clicking on the ‘x’ at the upper right-hand corner of the window [...]

Application Setup Weekly Schedule Sun-Sat : Select the days of the week during which you would like to utilize the operations below. Snapshots begin at : Set the time to start operations. Snapshots stop at : Set the time to stop operations. Setting identical begin and stop times means 24-hour operation. Event operation Delay _ second(s) before dete[...]

34[...]

Camera Control On the Camera Control page, there are two main function control areas: Camera contr ol ar ea The pan and tilt functions can be controlled with these buttons . The “Left”, “Right”, “Up”, and “Down” buttons aim the camera accordingly. The “Home” button aims the cam era to the center. Pan speed : This controls the sp[...]

UPnP and DDNS Settings Enable DDNS : This option turns on the DDNS function. Provider : The provider list contains four hosts that provide DDNS services. Please connect to the service provider’s website to find out the service charges. Host name : If the User wants to use a DDNS service, this field must be filled. Please input the hostname that i[...]

37[...]

Remote Controller The network camera comes with a rem ote controller to comma nd its pan/tilt and other functi ons. The direction control area provides the same functions as you find on the camera’s homep age. The Pan/Patrol/Stop functions are also the same as on the homepage. Direction control area Auto movement control area Auto Patrol : This b[...]

Factory default “Factory default” Click on this link on the configuration page to restore factory default settings. Any changes made so far will be lost and the system will be reset to the initial factory settings. Af ter clicking on the “Restore” button and confirming, the system will restart and require the installer program to set up the[...]

A. T roubleshooting Status LED After powering up, the network camera performs a self-diagnostic to detect any hardware defects. The following table lists the LED patterns in general. In case of any fatal erro rs, the LED will blink in a pattern other than those below. Condition LED Color During self-diagnostic after power on Bli nking in interchang[...]

B. Frequently Asked Questions (F AQ) Q What if I forget my password? A After the Administrator's password has been assigned, all access to the network camera needs authentication. If you are one of the managed users, you have to ask the Administrator for the password. If you are the Administrator, there is no way to recover the root password e[...]

Q I cannot hear any sound while watching. A If there is "V_ONLY" shown above the image, click on connection type to uncheck "Disable audio". If there is "V" shown instead of "AV", the sound card in your PC may not have been properly installed. If "AV" is shown, check the audio source of the network [...]

C. URL commands of the Network Camera For some customers who already have their own web site or web control application, the network camera can be easily integrated through convenient URLs. This section lists the comm ands in URL format corresponding to the basic functions of the network camera. Capture update Snapshot of JPEG image /cgi-bin/video.[...]

Page URL The configuration page has a frame layout including an opti on list frame and an option page frame. Referenced URLs, except for the configuration page, direct users to the option page frame only. Some pages, such as image quality settings and preset settings, are opened in new windows for preview. Only the Administrator can access these UR[...]

General format of command URL Every configuration can be set through URL with the POST method, by the Administrator only. <general format> URL[?[name=value][ &name=value]……] <method> POST <authorized user> root System configuration URL URL: /setup/system.cgi NAME VALUE DESCRIPTION host <text string shorter than 15 chara[...]

Security configuration URL URL: /setup/security.cgi NAME VALUE DESCRIPTION rootpass <text string shorter than 15 characters> change root password username <text string shorter than 15 characters> add new user userpass <text string shorter than 15 characters> new user's password deluser <text string shorter than 15 characte[...]

ftp2 <domain name or IP address> secondary FTP server ftpuser2 <text string shorter than 15 characters> user name for secondary FTP server ftppass2 <text string shorter than 15 characters> password for secondary FTP server ftpfolder2 <text string shorter than 40 char acters> upload folder in secondary FTP server http <num[...]

Audio/Video configuration URL URL: /setup/video.cgi NAME VALUE DESCRIPTION text <text string shorter than 15 characters> enclosed caption 1 half 2 half x 2 size 3 normal B/W monochrome color <other than B/W> color fixb fix bit rate quality <other than fixb> fix quantization 1 lowest quality of video 2 lower quality of video 3 norm[...]

yes mirror image mirror no normal image improve anthing to improve audio quality in low bandwidth environment, this option must be resent whenever the URL is called, if it is to be enabled. internal set the audio source from built-in microphone. mphone external set the audio source from line-in microphone. Camera control URL URL: /setup/ptcamera.cg[...]

Application configuration URL URL: /setup/app.cgi NAME VALUE DESCRIPTION emode <not required> event mode application smode <not required> seque ntial mode application mail upload snapshots by email smethod ftp upload snapshots by FTP suffix <not required> FTP file with date and time suffix delay <integer> seconds delay to de[...]

D. How to View Your Camera via the Internet The steps outlined below will help you install your camera behind a router: 1. Camera Identification Open the camera’s web page by typing its IP address in your web browser, and click on “System”. If you intend to install multiple cameras, it is recommended that y ou give each camera a unique “Hos[...]

3. Opening Ports You will need to open unique ports for each camera in order to be able to view them rem otely over the Internet. You will need to open these ports in the “Network” secti on of the camera’s homepage for two reasons: a. if you need to use ports other than the default HTTP Port 80, Control Channel Port 5001, Video Channel Port 5[...]

For example, assume that you have five network cameras that need to be installed and they have the following IP addresses: 10.1.1.125 10.1.1.126 10.1.1.127 10.1.1.128 10.1.1.129 You can open the HTTP port for each network camera, from port 81 to Port 85, as illustrated below: Internet Camera 1 – IP 10.1.1.125, second “Web Server” port 81 Inte[...]

4. Locate, Make a Note of Your Router’s WAN (Public) IP Address You will need to go to the router’s web page (by typing in its local IP address in the web address bar) and find the “Status” (or similar) page. On this page, you should be able to locate the router’s IP address. This IP address is the router’s public IP address and will be[...]

5. Use Port Mapping to Assign Virtual Server Ports Typically, there is an “Advanced Setup” (or similar) section on the router’s web page where you can find a “Virtual Server” or “Port Mapping” sub-section. To enab le remote viewing over the Internet for your camera, you will need to open virtual server ports on your router. The steps [...]

6. Viewing the Camera from Outside the Network Once the settings have been correctly entered and saved , authorized users can access the camera from outside the local area network as well as from within. To access the cam era from outside the local area network in a rem ote location via the Internet, type (in sequence) the router ’s public IP add[...]

E. T echnical Specifications System CPU: T rimedia PNX1300 RAM: 16MB SDRAM ROM: 2MB FLASH ROM Networking Protocol - TCP/IP , HTTP , SMTP , FTP , T elnet, NTP , DNS and DHCP Physical - 10BaseT Ethernet or 100BaseT Fast Ethernet Vi d e o Algorithm Supported MPEG-4 (short header mode) Featur es - Adjustable image size, quality and bit rate - T imestam[...]

Microphone - Omni-directional - Frequency: 20 – 20,000Hz - S/N ratio: more than 58dB General I/O - 1 sensor input(max. 12VDC 50mA) - 1 relay output(max. 24VDC 1A, 125V AC 0.5A) LED indicator - Dual color status indicator Dimension - 104.5mm(L) * 104.5m m(W) * 1 13.6mm(H) We i g h t - NET . 336.6g Power - Consumption: near 8W - Universal switching[...]