Hangzhou Hechang Trading S3100-SI manual

H3C S3100-SI Series Ethernet Switches Quick Start Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Manual Version: T2-08225G-2 0070415-C-1.05[...]

Copyright © 2006-2007, Hangzhou H3C Technologies Co., Ltd. and its licensors All Rights Reserved No part of this manual may be re produced or tran smitted in any form or by any means without prior written consent of Hangzhou H3C Technologies Co., Ltd. Trademarks H3C, , Aolynk, , H 3 Care, , TOP G, , IRF, NetPilot, Neocean, NeoVTL, SecPro, SecPoint[...]

About This Manual Related Documentation In addition to this manual, each H3 C S3100-SI Series Ethernet Switches documentation set includes the followin g: Manual Content H3C S3100-SI Series Ethernet Switches Operation Manu al It is used for assisting the users in data configurations and typical applications. H3C S3100-SI Series Ethernet Switches Co[...]

Chapter Contents 2 Installation Preparation Introduces the installation preparation and precaution of S3100-SI Series Ethernet Switches. 3 Installation Introduces the proce dures to install an S3100-SI Series Ethernet Switch, including the setup of the mainframe, cards and cables. 4 Lightning Protection of the Switch Introduces lightning prote ctio[...]

Symbol s II. Convention Description Warning Means reader be extremely caref ul. Improper ope ration may ca use bodily injury. Caution Means reader be ca reful. Improper operation may cause data loss or damage to equipment.  Note Means a complementary descri ption. Environmental Protection This product has bee n designed to co mply with the requi[...]

Quick Start H3C S3100-SI Series Ethernet S witches Table of Contents i Table of Contents Chapter 1 Product Ov erv iew ........................................................ 1-1 1.1 S3100-26T-SI Ethernet Switch .......................................... 1-1 1.1.1 Appearance ............................................................. 1-1 1.1.2 Fr[...]

Quick Start H3C S3100-SI Series Ethernet S witches Table of Contents ii 1.5 S3100-16C-SI/S3100-16C-SI-DC Ethernet Switch .......... 1-10 1.5.1 Appearance ........................................................... 1-10 1.5.2 Front Panel ............................................................ 1-10 1.5.3 Rear Panel ..............................[...]

Quick Start H3C S3100-SI Series Ethernet S witches Table of Contents iii Chapter 3 Installation .................................................................... 3-1 3.1 Installation of the Switch .................................................... 3-1 3.1.1 Mounting the Switch into a 19-Inch Cabi net ............ 3-1 3.1.2 Mounting the Switch [...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-1 Chapter 1 Product Overview 1.1 S3100-26T-SI Ethernet Switch 1.1.1 Appearance As shown in the following figure, the S3100-26T -SI Ethernet Switch provides 24 x 10/100Bas e-TX Ethernet po rts, two 10/100/1000Base-T Ethernet port s, and one Console port. Figure 1-1 S310[...]

Quick Start er 1 Product Overvie H3C S3100-SI Series Ethernet S witches Chapt w 1-2 (1) Power LED (2) A/L mode LED (3) D/S mode LED (4) Port left LED (yellow) (5) Port right LED (green) (6) 10/100 Base-TX port (7) 10/100/1000 Base-T port (8) Console port (9) Link LED (green) (10) Active LE D (yellow) (1 1) Mode switch button Figure 1-2 Front panel [...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-3 1.1.4 Power System The S3100-26T -SI Ethernet Switch support s AC input power module. z Rated voltage ran ge: 100 V AC to 240 V A C, 50/60 Hz z Max voltage range: 90 V A C to 264 V AC, 47 Hz to 63 Hz 1.1.5 Cooling System The S3100-SI Series Ethernet Switches (hereina[...]

Quick Start er 1 Product Overvie H3C S3100-SI Series Ethernet S witches Chapt w 1-4 (1) Power LED (2) A/L mode LED (3) D/S mode LED (4) Port left LED (yellow) (5) Port right LED (green) (6) 10/100 Base-TX port (7) 10/100/1000 Base-T port (8) Console port (9) Link LED (green) (10) Active LE D (yellow) (1 1) Mode switch button Figure 1-5 Front panel [...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-5 1.2.4 Power System The S3100-16T -SI Ethernet Switch support s AC input power module. z Rated voltage ran ge: 100 V AC to 240 V A C, 50/60 Hz z Max voltage range: 90 V A C to 264 V AC, 47 Hz to 63 Hz 1.2.5 Cooling System The S3100-SI series cool of f in nature way . [...]

Quick Start er 1 Product Overvie H3C S3100-SI Series Ethernet S witches Chapt w 1-6 (1) Power LED (2) A/L mode LED (3) D/S mode LED (4) Port left LED (yellow) (5) Port right LED (green) (6) 10/100 Base-TX port (7) 10/100/1000 Base-T port (8) Console port (9) Link LED (green) (10) Active LE D (yellow) (1 1) Mode switch button Figure 1-8 Front panel [...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-7 1.3.4 Power System The S3100-8T -SI Ethernet Switch support s AC input power module. z Rated voltage ran ge: 100 V AC to 240 V AC, 50/60 Hz z Max voltage range: 90 V AC to 264 V AC, 47 Hz to 63 Hz 1.3.5 Cooling System The S3100-SI series cool of f in nature way . 1.4[...]

Quick Start Chapter 1 Product Overvie H3C S3100-SI Series Ethernet S witches w 1-8 (1) Power LED (2) A/L mode LED (3) D/S mode LED (4) Port left LED (yellow) (5) Port right LED (green) (6) 10/100 BASE-TX port (7) Expansion slot (8) Console port (9) Mode switch button Figure 1-11 Front panel of the S 3100-2 6C-SI/S3100-26C-SI-D Ethernet Switch C [...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-9 I. Rear panel of the S3100-26C-SI model supporting AC input: (1) AC po wer socket (2) Grounding screw Figure 1-12 Rear panel of the S3100-26C-SI model supporting AC inp ut II. Rear panel of the S3100-26C-SI model supporting DC input: (1) DC power socket (2) Grounding[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-10 z Max voltage range: –36 VDC to –72 VDC 1.4.5 Cooling System The S3100-SI series cool of f in nature way . 1.5 S3100-16C-SI/S3100-16C-SI-DC Ethernet Switch 1.5.1 Appearance As shown in the following figure, the S3100-16C-SI/S3100-16C-SI-DC Ether net Switch provi[...]

Quick Start er 1 Product Overvie H3C S3100-SI Series Ethernet S witches Chapt w 1-11 (1) Power LED (2) A/L mode LED (3) D/S mode LED (4) Port left LED (yellow) (5) Port right LED (green) (6) 10/100 BASE-TX port (7) Expansion slot (8) Console port (9) Mode switch button Figure 1-15 Front panel of the S3100-1 6C-SI Ethernet Switch  Note: z When a [...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-12 I. Rear panel of the S3100-16C-SI model supporting AC input: (1) AC po wer socket (2) Grounding screw Figure 1-16 Rear panel of the S3100-16C-SI model supporting AC inp ut II. Rear panel of the S3100-16C-SI model supporting DC input: (1) DC power socket (2) Groundin[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-13 1.5.5 Cooling System The S3100-SI series cool of f in nature way . 1.6 S3100-8C-SI/S31 00-8C-SI-DC Ethernet Switch 1.6.1 Appearance As shown in the following figure, the S3100-8C-SI/S3100 -8C-SI -DC Ethernet Switch provides 8 x 10/100Base-TX Ethern et ports, one exp[...]

Quick Start er 1 Product Overvie H3C S3100-SI Series Ethernet S witches Chapt w 1-14 (1) Power LED (2) A/L mode LED (3) D/S mode LED (4) Port left LED (yellow) (5) Port right LED (green) (6) 10/100 BASE-TX port (7) Expansion slot (8) Console port (9) Mode switch button Figure 1-19 Front panel of the S3100-8 C-SI Ethernet Switch  Note: For detail[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-15 I. Rear panel of the S3100-8C-SI model supporting AC inpu t: (1) AC po wer socket (2) Grounding screw Figure 1-20 Rear panel of the S3100-8C-SI model supporting AC inp ut II. Rear panel of the S3100-8C -SI model supporting DC input: (1) DC power socket (2) Grounding[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-16 1.6.5 Cooling System The S3100-SI series cool of f in nature way . 1.7 S3100-SI Series Front Panel LEDs 1.7.1 Power LED Table 1-1 Description of the power LE D on S3100-SI series LED Mark on th e panel Status Description ON The switch is powered on. Power LED PWR OF[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-17 Table 1-2 Description of the port status LEDs on the S3100-SI series Mode LED status Port status LEDs and their status Description Flashing Data is passing through the port. Yellow LED (left) OFF No data is passing through the port. ON The port is connected properly[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-18 After the switch is po wered on, the A/L LED lights up initially . If you press the MODE button, the D/S LED light s up. After that, if you press the MODE button again within 45 seconds, the A/L LED light s up again, or else the A/L LED automatically lights up af te[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-19 Item S3100-26T- SI S3100-16T-SI S3100 -8T-SI Number of fixed ports 24 x 10/100Base- TX auto-sensing ports 2 x 10/100/1000 Base-T ports 16 x 10/100Base-T X auto-sensing ports 1 x 10/100/1000B ase-T port 8 x 10/100Base- TX auto-sensing ports 1 x 10/100/1000 Base-T por[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-20 1.8.2 S3100-26C-SI/S 3100-16C-SI/S3100-8C-SI Ethernet Switch Tec hnical Specifications Table 1-4 S3100-26C-SI/S3100-16C-SI/S3100-8C-SI Ethernet Switch technical specifications Item S3100-26C-SI S3100-16 C-SI S3100-8C-SI Physical dimension (H x W x D) 42 x 436 x 240 [...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-21 Item S3100-26C-SI S3100-16 C-SI S3100-8C-SI Supported expansion interface module type 10/100/1000BASE-T interface module with max transmission distance of 100 m (328.1 feet) 100BASE-SX (SC, 2 km (1.2 mi)) 100BASE-LX (SC, 15 km (9.3 mi)) 100BASE-LH40 (SC, 40 km (24.9[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 1 Product Overvie w 1-22 Item S3100-26C-SI S3100-16 C-SI S3100-8C-SI PoE (as powered device) Not supported Supported Supported System power consumptio n (full load) 20 W 12 W 10 W Fan None None None Operating temperature 0°C to 45°C Relative humidity (nonconden sing) 10% to 90%  Note: [...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 2 Installation Preparation 2-1 Chapter 2 Installation Preparation 2.1 Precautions T o avoid any device im pairment and b odily injury because of improper use, please take the followi ng precautions: z Before cleaning the switch, pull out the power plug of the switch. Do not clean the switch[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 2 Installation Preparation 2-2 2.2 Requirements on Environment S3100-SI series must be use d indoors. When you inst all your switch in a cabinet or in stall it dire ctly on a workbench, you mu st ensure: z Enough space i s left near the ai r-int ake hole an d the ventilation hole of the swi[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 2 Installation Preparation 2-3 damage to the switch. High temperature for a long time will sp eed up the aging of insulation material, greatly lower the reliability of the switch and greatly reduce t he life span o f the switch. 2.2.2 Cleanness Requirements Dust is a potential hazard to the[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 2 Installation Preparation 2-4 Table 2-2 Limits on harmful gas in the equipment room Gas Max content (mg/m³) SO 2 0.2 H 2 S 0.006 NH 3 0.05 Cl 2 0.01 2.2.3 Anti-interfe rence Requirements A switch in use may be affe cted by the interference fro m outsi de the system by way of capacit anc e[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 2 Installation Preparation 2-5 2.2.4 Laser Usage Security S3100-SI series are category-1 la ser equipment. When an optional o ptical interface card of the S3100-SI series i s operating, it is prohibited to st are into the optical interface because the laser beam emitted from the opti cal fi[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-1 Chapter 3 Installation Caution: On a mounting screw of the ch assi s of any H3C Series Switches, there is a seal which m ust be kept intact before the agent maintains the switch for you. You must get the permission of your local agent before you can open the chassis. Ot h[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-2 S tep 2: Place the switch on a shelf of the cabinet, and slide the switch into the cabinet along the guide s in the cabinet to an appropriate position. S tep 3: Insert screws through the mount ears into the front mounting posts of the ca binet and tighten them, ensuring t[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-3 3.1.2 Mounting the Sw itch on a Workbench When a 19-inch st andard cabinet is not available, you can simpl y place the switch on a clean workbench. When doing so, you should ensure: z The workbench is st able and well gro unded. z A clearance of about 10 cm is reserved ar[...]

Quick Start er 3 Installation H3C S3100-SI Series Ethernet S witches Chapt 3-4 Figure 3-3 Anchor kit illustration The wall-mount procedure is as follo ws (see Figure 3-4 ): 1) Drill two holes in the wall on the same horizont al line, with a distance of 169 mm. 2) Insert anchor kits into the holes. 3) Drive the screws into the anchor kit s, keeping [...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-5 Caution: When mounting the switch, keep t he Ethernet po rts of the switch facing downwards and the two sides wit h ventilation holes vertical to the ground. 3.2 Installation of Expand Card  Note: The following section d escribes the proce dures to install an ONU card.[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-6 II. Installation of an ONU subcard S tep 1: Dismount the dummy panel of an expa nsion slot of the switch. S tep 2: Insert the ONU card into the expansi on slot to the place. S tep 3: Fix th e ONU card fi rmly with captive screws. 3.3 Connection of Power Cord and Grounding[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-7 II. Connecting AC power cord S tep 1: Connect one end of the chassis grounding wire (comin g with the switch) to the grounding screw on the rea r of the chassis and the other end to the ground nearby . S tep 2: Connect one end of the power cord to the power socket on the [...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-8 S tep 1: Connect one end of the chassis grounding wire (comin g with the switch) to the grounding screw on the rea r of the chassis and the other end to the ground nearby . S tep 2: Connect the DC power term inals of the switch t o –48 VDC power supply through DC power [...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-9 3.3.3 Connecting Grounding wire Caution: You should properly connect the sw it ch grounding wire since it is crucial to the lightning protection an d electrom agnetic shield (EMS) of your switch. The power input end of the switch is connected with a noise filter , whose c[...]

Quick Start Chapter 3 Installation H3C S3100-SI Series Ethernet S witches 3-10 (1 ) (4 ) (1 ) (4 ) (3 ) (1 ) (4 ) (1 ) (4 ) (3 ) (2 ) (1 ) (4 ) (1 ) (4 ) (3 ) (1 ) (4 ) (1 ) (4 ) (3 ) (2 ) (1) Power input (2) Grounding screw (3) Grounding wire (4) Grounding strip Figure 3-8 Grounding the swit ch through a groundi ng strip z When there is no groundi[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-11 y Figure 3-9 Grounding the swit ch by burying the grounding bod into the earth z For an AC-powered switch, if none of the above two conditions is available, ground it throu gh the PE wire of the AC power supply . In this case, ma ke sure this P E wire is we ll connected [...]

Quick Start er 3 Installation H3C S3100-SI Series Ethernet S witches Chapt 3-12 (1 ) (2 ) (4 ) (3 ) (6 ) (5 ) (8 ) (7 ) (11 ) (1 0 ) (1 ) (2 ) (4 ) (3 ) (6 ) (5 ) (8 ) (8 ) (7 ) (11 ) (9 ) (1 ) (2 ) (4 ) (3 ) (6 ) (5 ) (8 ) (7 ) (11 ) (1 0 ) (1 ) (2 ) (4 ) (3 ) (6 ) (5 ) (8 ) (8 ) (7 ) (11 ) (9 ) (1)AC/DC power cabinet (2) –48V strip (3) –48V ([...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-13 3.4 Connecting Optical Fiber Caution: z After a switch starts, the PON interface may emit invisible radial when there is no optical connector con nected to it and the protective cap is removed from it. Theref ore, do not stare into the optical interface. z Be sure to cov[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-14 S tep 3: Plug the optical connector into the PO N interface of the ONU subcard. 3.5 Connection of Console Cable 3.5.1 Console Cable Console cable is an 8-core shield ed cable. At one end of the cable is a crimped RJ45 connector to be co nnected to the Con sole port of th[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-15 RJ-45 Signal Direction DB-9 7 DSR → 6 8 CTS → 8 3.5.2 Connecting Console Cable Follow these step s to connect a terminal device , a PC for example, to the switch: S tep 1: Connect the DB-9 female con nector of the Console cable to the serial port of the PC or t he te[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 3 Installation 3-16  Note: When connecting a P C to a powered-on switch, you are recommende d to connect the DB-9 co nnector of the Console cable to the PC befo re connectin g the RJ45 c onnector to the switc h. When disconnecting a PC from a powered-on switch, you are recommended to dis[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 4 Lightning Protection of the Switch 4-1 Chapter 4 Lightning Protection of the Switch 4.1 Installation of Lightning Arrester for AC Power (Socket Strip with Lightning Protection) Caution: Lightning arrester will not be shipped with the switch. You should purchase it by yourself if needed. I[...]

Quick Start Chapter 4 Lightning Protection of the Switch H3C S3100-SI Series Ethernet S witches 4-2 M ai nboar d G r oundi ng and pol ar i t y i ndi cat or ( r ed) : O n m eans t hat t he l i nes ar e wrongl y connect ed ( ei t her t he gr ound w i r e i s not w el l c onnect ed, or t he l i ve and zer o l i nes ar e w r ongl y connect ed) . Pl eas[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 4 Lightning Protection of the Switch 4-3 Caution: z Make sure that the arrester is well grou nded before using the lightning arrester for power. z After inserting AC power cord pl ug of switch into the socket of lightning arrester, if the green LED i s on and the red LED doe s not alarm, it[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 4 Lightning Protection of the Switch 4-4 4.2 Installation of Lightning Arrester for Network Port  Note: Lightning arrester for net work port is specially designed f or the Ethernet port of 10/100M electrical interface (RJ-45 connector is adopted in this case). Caution: Lightning arrester[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 4 Lightning Protection of the Switch 4-5 II. Installation procedure S tep 1: T ear the protection p aper at one side of the double fa ced adhesive tape ap art from the t ape, and stick the t ape on the surface of the arrester . T ear the protection paper at another side ap art from the tape[...]

Quick Start Chapter 4 Lightning Protection of the Switch H3C S3100-SI Series Ethernet S witches 4-6 Switch Network cable indoors Power input Network cable led i Lightning arreste r f (attached onto th Ground wire of li ght Grounding screw Metal cabinet th nto from outdoor or network port e chassis) ning arrester of switch at contains the swi tch po[...]

Quick Start H3C S3100-SI Series Ethernet S witches Chapter 4 Lightning Protection of the Switch 4-7 htning arresters for all these network port s for protection. interconnect with other devices via cables out door , you should inst all lig[...]