Haier XQB60-C manual

XQB60-C User's Manual Automatic Washing Machine Please read this manual carefully before using. Retain it for future reference Please check if the power receptacle has good earthing condition before using to guarantee your safety . The manufacturer will not bear the responsibility for those risks occurred from not obeying this manual. Specific[...]

Names of the part s Before using Before using Before using Before using Meaning and description of the symbols Accessories Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Failure to comply with the instruction could cause damage of the machine or injure the personal safety of the user.[...]

Safety precautions Before using Before using Before using Before using In normal usage of the washing machine, the power plug shall be ready to be pulled or plugged with hand. Be sure to pull the plug off and close the water faucet in following cases: power failure, delivering the machine, setting the machine idle or cleaning the machine. Do not pl[...]

Do not put hand into the rotating tub. It is dangerous even if the rotation speed is slow . T ake special care of the children. Keep children away from the washing machine to avoid them climbing on it. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water) on the washing mach[...]

Adjust the installation position 3 Please install and adjust the machine according to the requirement of the manual, which is very important for you to operate the machine safely and properly . Safety precautions Before using Before using Before using Before using The largest allowable slope of the shank base of the machine is 2 . The slanting or r[...]

Before using Before using Before using Before using 1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2. Do not ramp or press the drain hose. If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of the h[...]

Install the water inlet pipe Connection between the water inlet hose jointer and the water faucet 5 Water faucet, suitable water fauce t, not suitable It is required that the front end shall be longer than 10mm. The outlet end surface of the faucet shall be flat and smooth. If not, please file it smooth to avoid leakage. 2 Loosen the four screws of[...]

6 Dismount the water inlet hose Connection between the water inlet hose jointer and the water inlet hose Check the connection between the water inlet hose jointer and the water faucet 1.Swing the hose gently to check if it is fastened stably . 2.After installation, open the faucet to check if it leaks water. 3.Do not bend the hose by force. 4.Each [...]

Using process Using process 1Pr epar a tion bef or e washing Pay atte ntion to the foll owings before washing Preparation before washing 1 Connect the water inlet hose. Open the water faucet. 2 Confirm that the washing machine is earthed reliably. Then plug the power plug into the receptacle. The earthing terminal shall not link to gas pipeline and[...]

8 Reference weight of the laundries: Working suit up,down Jeans about 800g The capacity of washing and spinning refer to t he largest weight of the sta ndard laundries under dry condition that can be w ashed or spinned in one cycle. Washing quantity for one cycle shall be less than the rated capacity.The largest capacity of this machine is 6.0kg. T[...]

How to use the whitener Standard dosage of the detergent and water quantity Laundries quantity (kg) Water level Water quantity Common powder, How to use the washing powder Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Do not use whitener on laundries with color or print as they are not colorfa[...]

a Description of the function of the operation buttons Mode and me aning of the indi cator Flash: indicat ing the run ning mo de On: indi cating the mode ab out to run Flash ra pidly: indicat ing abno rmal situ ation 4 Use the oper a tion buttons Using process Using process Using process Using process Push it to select one or more programs from WAS[...]

Using process Using process Using process Using process After the power is switched on, push it to start the machine During working, push it to pause working. During pause, push it to resume working. ST ART/P AUSE button Normal Common washing Speedy Quick washing of laundries with light soil Gentle W ashing the woolen textiles or underwear Jeans W [...]

Using process Using process Using process Using process Even there's no water in the tub, a certain period is required before spin starting. Separate the laundries that are not colorfast from other laundries in washing. Attention b Steps of using the operation buttons and description of each step. POWER ON OFF High Middle Low WA TER LEVEL 1.Pu[...]

Using process Using process Using process Using process 2.Select suitable automatic program. After switching on the power, the machine will set standard program automatically. T o select other automatic program, push the suitable button till the relative indicator is on. Refer to the PROGRAM button on Page 1 1 for the selection. For instance: Push [...]

Using process Using process Using process Using process Procedure selection method Times of pushing t he SELECT button Selected procedure Applicable circumstance Contents (the lighted indicators indicate the programs about to run) WASH, RINSE, SPIN When the common laundries need washing, rinsing and spinning. WASH RINSE SPIN WASH RINSE SPIN WASH RI[...]

7 Disposal After W ashing If the cabinet is dirty , wipe it with wet soft cloth Do not wash with water directly . Wipe with neutral detergent. Do not wipe with thinner, petrol, alcohol, etc. 1.After washing, close the water faucet. (If desired, dismount the water inlet hose). 2.Do not store water in the washing machine for a long period. Drain the [...]

There may be some water flowing out of the drain hose in the first use of the machine. It is the water remained in the machine during the ex-factory performance inspection. Phenomenon Reason How to solve The water faucet leaks water There's abnormal sound inside the machine The machine does not act. The safety switch acts, and the spinning can[...]

Packing list Name User's manual Lint filter Water inlet hose component Bottom plate T apping screw Quantity Inside the document bag Inside the document bag Storage position Inside the inner tub Between the upper cushion of the washing machine package and the upper seal of the package carton 1 piece 1 piece 1 piece 1 pieces 1 set Inside the doc[...]

Model Rated voltage frequency Max water consumption Rated washing power Rated spinning power Weight Dimensions (mm) XQB60-C 220-240V ~ 50Hz 6.0kg 415W 315W About 33kg L 540 W 540 H 875 Water level/Water quantity (about) Water inlet pressure Specifications Specifications Rated washing / spinning capacity 50L/High, 42L/Middle, 34L/Low About 150L (the[...]