Frigidaire 316423411 manual

p/n 31642341 1 (0709) R ange ES300 Control, Self-Cleaning Oven with Ceramic Cooktop Electric READ AND SA VE THESE INSTRUCTIONS Welcome .......................................... 2 Important Safety Instructions ..... 2-4 Features at a Glance ...................... 5 Before Setting Oven Controls ....... 6 Setting Surface Controls ............ 7-9 Ove[...]

2 © 2006 Electrolux Home Products, Inc. All rights reserved Welcome & Congratulations Congratulations on your purchase of a new range! At Electrolux Home Product s, we are very proud of our product and are completely committed to providing you with the best service possible. Y our satisfaction is our number one priority . We know you’ll enjo[...]

3 Important Safety Instructions Stepping, leaning or sitting on the doors or drawers of this range can result in serious injuries and also cause damage to the range. Do not allow children to climb or play around the range. The weight of a child on an open door may cause the range to tip, resulting in serious burns or other injury. Do not use the ov[...]

4 IMPORT ANT INSTRUCTIONS FOR CLEANING YOUR RANGE • Clean the range regularly to keep all parts free of grease that could catch fire. Pay particular attention to the area underneath each surface element. Do not allow grease to accumulate. • Kitchen cleaners and aerosols—Always follow the manufacturer’s recommended directions for use. Be awa[...]

5 Features At A Glance Y our Electric Range Features Include: 1 . Electronic Oven Control with Kitchen Timer. 2 . Left Front Single Radiant Element Control (some models) or Dual Radiant Element Control (some models). 3 . Left Rear Single Radiant Element Control. 4 . Warming Zone Radiant Element Control (some models). 5 . Right Rear Single Radiant E[...]

6 Before Setting Oven Controls Oven V ent Location The oven vent is located under the left side of the control panel (See Fig. 1). When the oven is on, warm air passes through the vent. This venting is necessary for proper air circulation in the oven and good baking results. DO NOT BLOCK OVEN VENT. Arranging Oven Racks & Roasting Shelf ALWAYS A[...]

7 Setting Surface Controls Cookware Material T ypes The cookware material determines how evenly & quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are: ALUMINUM - Excellent heat conductor. Some types of food will cause it to darken (Anodized aluminum cookware resists staining & pit[...]

8 Single Radiant Surface Elements (all models) Fig. 3 To Operate a Single Radiant Element: 1. Place correctly sized cookware on radiant surface element. 2. Push in & turn the surface control knob in either direction to the desired setting (Refer to the Suggested Radiant Surface Element Settings Table & Fig. 3). Start most cooking operations[...]

Heating withinner (small) element only Heating with both elements Fig. 1 Fig. 2 T o Operate Dual Radiant Surface Element s (some models) Symbols on the backguard are used to indicate which coil of the Dual Radiant element will heat. The symbol indicates the inner coil only. The symbol indicates both inner and outer coils will heat (See Figs. 1, 2 &[...]

Oven Control Functions 10 Note: The time of day must first be set in order to operate the oven. Setting Oven Controls *Note: The OVEN indicator light on the electronic display will turn ON & OFF when using the Bake feature & during preheat. This is normal & indicates that the oven is cycling to maintain the selected baking temperature. [...]

11 T o Set the Clock When the range is first plugged in or when the power supply to the appliance has been interrupted, the display will flash "12:00". 1. Press once (do not hold pad down). 2. Within 5 seconds press & hold the or until the correct time of day appears in the display. Note: The clock cannot be changed during any timed b[...]

12 T o Set Timed Bake with Delay S tart The BAKE TIME and START TIME pads operate the features that will turn the oven ON & OFF at the times you select in advance. The oven may be programmed to start immediately & shut off automatically (Timed Bake) or to begin baking at a later time with a delayed start time. To Program the Oven to Begin B[...]

13 For Roasting: 1. Preheating is not necessary when roasting foods with Speed Bake™ Cooking System. 2. Since Speed Bake cooks food faster, reduce the cook time by 25% from the recommended cook time of your recipe. Increase the time until the desired doneness is obtained. Note: Cook time reductions will vary depending on the amount and type of fo[...]

14 Preparing for a Self-Clean Cycle A Self-Cleaning oven cleans itself with high temperatures (well above cooking temperatures) which eliminate soils completely or reduces them to a fine powdered ash you can wipe away with a damp cloth. Adhere to the following cleaning precautions: • DO NOT use oven cleaners or oven protective coatings in or arou[...]

15 To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape. DO NOT force the oven door open. This can damage the automatic door locking system. Use caution & avoid possible burns when opening the door after the Self- Cleani[...]

16 Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop. DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can chemically damage the ceramic-glass surface. Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL. Cleaning Recommendations[...]

17 Do not use the following on the ceramic glass cooktop: • Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads. They may scratch the cooktop, making it more difficult to clean. • Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as they may etch or discolor the cooktop. • Do not use d[...]

18 Adjusting Y our Oven T emperature Care & Cleaning of Stainless Steel (some models) Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the appearance of stainless parts. Refer to the Cleaning Table at the beginning of this section for detailed cleaning instructions. Note: Oven [...]

19 Before Y ou Call Solutions to Common Problems Metal marks (Ceramic Cooktop models) - Sliding or scraping of metal utensils on cooktop surface. Do not slide metal utensils on cooktop surface. Use a ceramic-glass cooktop cleaning creme to remove the marks. See "Cooktop Cleaning and Maintenance" in the Care & Cleaning section. Scratch[...]

Y our appliance is covered by a one year limited warranty . For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions. [...]