Crestron ST-PC manual

Crestron ST-PC Dual AC Power Control Module Operations Guide[...]

This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, pr oduct names and tradem arks are the proper ty of their respective owners. © 2003 Crestron Electronics, Inc.[...]

Crestron ST-PC Dual AC Power Control Module Contents Dual AC Power Control Module: ST-PC 1 Introduction ............................................................................................................................... 1 Features and Functions .............................................................................................[...]

[...]

Crestron ST-PC Dual AC Power Control Module Dual AC Power Control Module: ST-PC Introduction Features and Functions There are two Crestron ® Dual AC Power Control M odule configurations availa ble: ST-PC and STI-PC. Configur ation is based on th e type of power availab ility. Use the ST-PC with a 120V power supply and the STI-PC with a 220V power [...]

Dual AC Power Control Module Crestron ST-PC AC power is supplied vi a a 3-wire line cord (no plug on the STI-PC configurat ion). This power is solely for the p urpose of po wering the loads attach ed to the POWER A and B ports. Specifications The following table provides a sum ma ry of specifications for the ST-PC m odule. ST-PC Specifications SPEC[...]

Crestron ST-PC Dual AC Power Control Module NOTE: Crestron software and any files on the websi te are for Authorized Crestron dealers and Crestron Authorized Independent Program mers (C AIP) only. New users may be required to register to obtain access to certain areas of the site (including the FTP site). Physical Description The ST-PC, shown in th[...]

Dual AC Power Control Module Crestron ST-PC ST-PC Physical Views ST-PC PWR A/C CONTROLLER NET POWER B POWER A 1.70 in (4.32 cm) 6.13 in (15.57 cm) 6.32 in (16.05 cm) 7.07 in (17.96 cm) 6.94 in (17.63 cm) 1.50 in (3.81 cm) NET NET .5A 12VDC CRESTRON CRESTRON ELECTRONICS INC. N.J. 07626 POWER A POWER IN 120-220VAC 10A MAX OUTPUT COMBINED 50-60HZ POWE[...]

Crestron ST-PC Dual AC Power Control Module Ports A number of labele d ports are provided on the back of the ST-PC. Refer t o the following illustration s and descriptions. ST-PC Ports CRESTRON ELECT RONICS INC. N.J. 07626 .5A 12VDC NET NET POWER A POWER IN POWER B 90-125VAC 10A MAX OUTPUT COMBINED 50-60HZ STI-PC Ports CRESTRON ELECTRONICS INC. N .[...]

Dual AC Power Control Module Crestron ST-PC POWER A and POWER B For the ST-PC, two three-prong socket connectors are provided t o connect to any device that requires AC on/off power swi tching. For the STI-PC, two internati onal power cords (approximat ely six feet in le ngth) are available for connection to an international power socket. POWER IN [...]

Crestron ST-PC Dual AC Power Control Module Setup Identity Code Refer to the note on page 12 for a definition of Viewport. All equipment and user interfaces within the network require a unique identity code (Net ID). These codes are two-digit hexadecim al num bers from 03 to FE. The Net ID of each unit must match an ID code specified in the SIMPL W[...]

Dual AC Power Control Module Crestron ST-PC NOTE: When installing network wiring, refer t o the latest revisi on of the wiring diagram(s) appropriat e for your specific system configuration, availa ble from the Downloads | Product Manuals | Wiring Diagrams secti on of the Crestron website (www.crestron.com). Hookup Connections for ST-PC DAISY CH AI[...]

Crestron ST-PC Dual AC Power Control Module Programming Software NOTE: Have a question or comm ent about Crest ron software? Answers to frequently asked questions (FAQs) can be vi ewed in the Online Help section of the Crestron website ( www.crestron.com ). To post a question or vi ew questions you have submitted to Crestr on’s True Blue Support,[...]

Dual AC Power Control Module Crestron ST-PC Configuration Manager i s where programm ers “build” a Crestron control sy stem by selecting hardware from the Device Library . In Configurat ion manager, drag t he PRO2 from the Control Syst ems folder of the Device Library and drop it in the upper pane of the System Views . The PRO2 with its associa[...]

Crestron ST-PC Dual AC Power Control Module C2Net Device, Slot 9 Setting the Net ID in Device Settings Double-click the ST-PC icon to open the “Device Settings” window. This window displays the ST-PC device i nform ation. If necessary, select the Net ID tab t o change the Net ID as shown in the fo llowing figure. ST-PC “Device Settings” Win[...]

Dual AC Power Control Module Crestron ST-PC ST-PC Symbol in Programming Manager Programm ing Manager is where program mers “program ” a Crestron control system by assigning signals t o symbols. The foll owing graphic shows the ST-PC sym bol in the SIMPL Windows’ Programm ing Manager. ST-PC SIMPL Windows Symbol The ST-PC provides two discrete [...]

Crestron ST-PC Dual AC Power Control Module parameters, and com municat e with networ k device consoles and touchpanels , among many other t asks. Viewport can function as a term inal em ulator for generic file transfer. All of these functions are accessed through the comm ands and options inViewport me nus. Therefore, for its effectivness as a sup[...]

Dual AC Power Control Module Crestron ST-PC 1. Open the Crestron Viewport. Either launch the standalone versi on of Viewport, or start SIMPL Windows, and from the m enu bar, select Tools | Viewport . 2. Refer to the following illustration. From the Viewport menu, select Setup | Communications settings (alternatively, press Alt+D ) to open the “Po[...]

Crestron ST-PC Dual AC Power Control Module NOTE: The parameters shown in the illustration above are the port settings for a 2- Series control system . Consult the Operati ons Guide for the control system being used for the exact parameter selection. 4. To verify comm unication, select Diagnostics | E stablish Communications (Find Rack) . This shou[...]

Dual AC Power Control Module Crestron ST-PC “Send Program” Window 4. To verify that the program has been transferred successfully, select Diagnostics | Report Program Information . This should display a window that provides detail s about the current program loaded into the control system. Problem Solving Troubleshooting The following table pro[...]

Crestron ST-PC Dual AC Power Control Module Further Inquiries If after reviewing this Operat ions Guide, you cannot locate specifi c information or have questions, please take advantage of the C restron award winning custom er service team by calling: • In the US and Canada, call the Crestron corporate headquart ers at 1-888-CRESTRON [1-888-273-7[...]

Dual AC Power Control Module Crestron ST-PC Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise m ay be returned for credit, exchange, or service without prior authori zation from CRESTR ON. To obtain warranty service for CRE STRON products, contact the factory and request an RMA (Return Me rchandise Authorization) n[...]

Crestron ST-PC Dual AC Power Control Module Operations Guide – DOC. 5708A Dual A C Pow er Control Module: ST-PC • 19 This page intention ally left blank.[...]

Crestron Electronics, Inc. Operations Guide – DOC. 5708A 15 Volvo Drive Rockleigh, NJ 07647 11.03 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.c r e st r o n. c om change without notice.[...]