Compaq 99875320-5 manual

USB HID INTELLIHEAD FOR SWIPE READERS TECHNICAL REFERENCE MANUAL Manual Part Number 99875320-5 OCTOBER 2008 REGISTERED TO ISO 9001:2000 Phone: (562) 546-6400 Technical Support: (651) 415-6800 www.magtek.com 1710 Apollo Court Seal Beach, CA 90740 FAX: (562) 546-6301[...]

ii[...]

iii C Printed in the United States of America lectronic or mechanical, for any purpose, ithout the express written permission of MagTek, Inc. agTek is a registered tr ademark of MagTek, Inc. telliHead ™ is a tradem ark of MagTek, Inc. 998 by Compaq Computer Corporation, Intel Corporation, Microsoft Cor poration, NEC Corporation. REVISIONS Rev Num[...]

iv te horized by MagTek to resell the products, in which event, this warranty ll, at its laced e, ek reserves the right to examine the . t, a three (3) day shipping service. A Return Material Authorization (RMA) number must accompany Y DING ANY WARRANTY OF MERCHANTABILITY OR O DVISED OF THE POSSIBILITY OF SUCH DAMA NY OTHER PARTY. IABILITY UNDER TH[...]

v FCC WARNING STATEM ENT n the ul mmunications. However, there is no guarantee that interference will not occur in a articular installation. FCC COMPLIANCE STATEME NT 2) this device must accept any interference ceived, including interference that may cause undesired operation. CANADIAN DOC STAT EMENT digital apparatus set out in the Radio terferenc[...]

TABLE OF CONTENTS SECTION 1. FEATUR ES AND SPECIFICATIONS .....................................................................................  1 1 2 2 2 5 5 5 5 7 7 9 9 10 11 11 12 12 12 12 12 13 13 13 13 13 14 14 14 14 15 15 16 17 18 19 20 21 22 23 25 25 25 26 27 FEATURES .......................................................................[...]

TABLES AND FIGURES Figure 1-1. USB In telliHead 3- Track ........................................................................................... ............... v  iii 5 28 29 30 31 32 33 34 35 36 Table 1-1. S pecifications .......................................................................................................................[...]

viii Figure 1-1. USB IntelliHead 3-Track[...]

SECTION 1. FEATURES AND SPECIFICATIONS The USB (Universal Serial Bus) HID (Human Interface Device) IntelliHead Swipe Reader is a compact magnetic stripe card reader that conform s to ISO standard s. The Reader is compatible with any device with a USB host in terface. A card is read by sliding it past th e head either forward or backward. The Reader[...]

USB HID IntelliHead S w ipe Reader HARDWARE CONFIGURATIONS The hardware configurations are as shown in the table below. Drawings of each model are included in Appendix A. Part Number Description Cable Length and Connector Type Rail or Housing 21030006 USB HID IntelliHead on spring 125mm, 5 pin Molex None 21030010 USB HID IntelliHead on spring 440mm[...]

Section 1. Features and Specifications SPECIFICATIONS Table 1-1 lists the specification s for the USB IntelliHead. Table 1-1. Specifications Reference Standards ISO 7810, ISO 7811, AAMVA and JIS X 6302* Power Input 5V from USB bus Recording Method Two-frequency coherent phase (F2F ) Message Format ASCII Card Speed 3 to 60 ips (7.62 – 152.4 cm/s) [...]

USB HID IntelliHead S w ipe Reader 4[...]

5 SECTION 2. INSTALLATION This section describes the cable connection, the Windows Plug a nd Play Setup, and the physical mounting of the unit. USB CONNECTION Since the USB IntelliHead is supplied as an OEM product, the installation and system integration will be unique for each application. The reader module m u st be attached to an appropriate co[...]

USB HID IntelliHead S w ipe Reader 6[...]

7 SECTION 3. OPERATION CARD READ A card may be swiped past the read head at any time. The magnetic stripe must face toward the head and may be swiped in either direction. If there is data encoded on the card, the device will attempt to decode the data and then send the re sults to the host via a USB HID input report. After the results are sen t to [...]

USB HID IntelliHead S w ipe Reader 8[...]

SECTION 4. USB COMMUNICATIONS This device conforms to the USB specification re vision 1.1. This device al so conforms with the Human Interface Device (HID) clas s specification version 1.1. Th e device communicates to the host as a vendor-defined HID device. The details about how the card data and commands are structured into HID reports follo w la[...]

USB HID IntelliHead S w ipe Reader have a usage page in the range 0xFF00 – 0xFFFF. All usages for this device use vendor-defined magnetic stripe reader usage page 0xFF00. The usage IDs for this device are defined in the following table. The usage types are also list ed. These usage types are defined in the HID Usage Tables document. Magnetic Stri[...]

Section 4. USB Communications Item Value (Hex) Input (Data, Variable, Absolute, Buffered Bytes) 82 02 01 Usage (Track 3 data) 09 32 Report Count (110 ) 95 6E Input (Data, Variable, Absolute, Buffered Bytes) 82 02 01 Usage (Command messa ge) 09 20 Report Count (24) 95 18 Feature (Data, Variable, Absolute, Buffered Bytes) B2 02 01 End Collection C0 C[...]

USB HID IntelliHead S w ipe Reader TRACK 2 DECODE STATUS Bits 7-1 0 Value Reserved Error This is a one-byte value, which indicates the status of decoding track 2. Bit position zero indicates if there was an error d ecoding track 2 if this bit is set to one. If it is zero, then no error occurred. If a track has data on it that is not noise, and it i[...]

Section 4. USB Communications CARD ENCODE TYPE This one-byte value indicates the type of enc oding that was found on the card. The following table defines the possible values. Value Encode Type Description 0 ISO/ABA ISO/ABA encode format 1 AAMVA AAMVA encode format 2 CADL CADL encode format. Note that this reader can only read track 2 for this form[...]

USB HID IntelliHead S w ipe Reader COMMANDS Most host applications do not need to send commands to the device. Most host applications only need to obtain card data from the device as describe d previously in this section. This section of the manual can be ignored by anyone who does not need to send commands to the device. Command requests and respo[...]

Section 4. USB Communications data. The HID specification requires that Reports be fixed in length. Command data m ay vary in length. Therefore, the Report should be filled with zeros after the valid data. RESULT CODE This one-byte field contains the value of the resu lt code. There are two ty pes of result codes: generic result codes and command-s[...]

USB HID IntelliHead S w ipe Reader The result codes for the Get and Set Property co mmands can be any of the codes list in the generic result code table. Property ID is a one-byte field th at contains a value that identi fies the property. The following table lists all the current property ID values: Value (Hex) Property ID Description 00 SOFTWARE_[...]

Section 4. USB Communications SERIAL_NUM PROPERTY Property ID: 0x01 Property Type: String Length: 0 – 15 bytes Get Property: Yes Set Property: Yes Default Value: The default value is no string with a length of zero. Description: The value is an AS CII string that represents the de vice’s serial num ber. This string can be 0 – 15 bytes long. T[...]

USB HID IntelliHead S w ipe Reader POLLING_INTERVAL PROPERTY Property ID: 0x02 Property Type: Byte Length: 1 byte Get Property: Yes Set Property: Yes Default Value: 10 Description: The value is a byte that represents the devices po lling interval for the In terrupt In Endpoint. The value can be set in the range of 1 – 255 and has units of millise[...]

Section 4. USB Communications MAX_PACKET_SIZE PROPERTY Property ID: 0x03 Property Type: Byte Length: 1 byte Get Property: Yes Set Property: Yes Default Value: 8 Description: The value is a byte that represents the devices maxim um packet size for the Interrupt In Endpoint. Th e value can be set in the range of 1 – 64 and has units of bytes. The m[...]

USB HID IntelliHead S w ipe Reader TRACK_ID_ENABLE PROPERTY Property ID: 0x04 Property Type: Byte Length: 1 byte Get Property: Yes Set Property: Yes Default Value: 0x95 Description: This property is defined as follows: id 0 T 3 T 3 T 2 T 2 T 1 T 1 Id 0 – Decodes standard ISO/ABA cards only 1 – Decodes AAMVA and 7-bit cards also T # 00 – Track[...]

Section 4. USB Communications INTERFACE_TYPE PROPERTY Property ID: 0x10 Property Type: Byte Length: 1 byte Get Property: Yes Set Property: Yes Default Value: 0 (HID) Description: The value is a byte that represen ts th e devices interface type. The value can be set to 0 for the HID interface or to 1 for the keyboard emulation interface. When the va[...]

USB HID IntelliHead S w ipe Reader DECODE_ENABLE PROPERTY Property ID: 0x1A Property Type: Byte Length: 1 byte Get Property: Yes Set Property: Yes Default Value: 0x00 Description: This property is defined as follows: Bit Position 7 6 5 4 3 2 1 0 Decode Type Reserv ed Reserved Reserved Reserved Reserved Reserv ed Reserved JIS Type 2 When a decode ty[...]

Section 4. USB Communications RESET_DEVICE COMMAND Command number: 0x02 Description: This command is used to reset the device. This command can be used to make previously changed properties take affect without having to unplug and then plug in the device. When the de vice resets, it automatically does a USB detach followed by an attach. After the h[...]

USB HID IntelliHead S w ipe Reader 24[...]

SECTION 5. DEMO PROGRAM The demo program, which is written in Visual Basic, can be used to do the following: • Read cards from the device and view the card data • Send command requests to the device and view the command responses • Guide application developers in their appl ication development by providing examples, in source code, of how to [...]

USB HID IntelliHead S w ipe Reader 26 SOURCE CODE Source code is included with the demo program. It can be used as a guide for application development. It is described in detail, w ith comm ents, to assist developers. The book USB Complete by Jan Axelson is also a good guide for a pplication developers, es pecially the chapter on Human Interface De[...]

APPENDIX A. DRAWINGS The following drawings are pr ovided in this sect ion: Part Number Title 21030006 USB HID IntelliHead, 3-Track, 125mm wire, 5-Pin Molex Connector 21030010 USB HID IntelliHead, 3 Track, 440mm wi re, 5-Pin Molex (Reverse pin out) 21030042 USB HID IntelliHead, 3 Track, 4.05mm Beam Arm, 5-Pin Molex 21040124 USB HID IntelliHead, 3-T[...]

USB HID IntelliHead S w ipe Reader Figure A-1. USB HID IntelliHead, 3- Track, 125mm Wire, 5-Pin Connector 28[...]

Appendix A. Drawings Figure A-2. USB HID IntelliHead, 3-Trac k, 440mm Wire, 5-Pin Reverse Connector 29[...]

USB HID IntelliHead S w ipe Reader Figure A-3. USB HID IntelliHead, 3-Track, 125mm Wire, 4.05mm Beam Arm, 5-Pin Molex 30[...]

Appendix A. Drawings Figure A-4. USB HID IntelliHead, 3-Track, 6’ Cable, USB-A Connector, 100mm Black 31[...]

USB HID IntelliHead S w ipe Reader Figure A-5. USB HID IntelliHead, 3-Track, 6” Cable, USB-A Connector, 100mm Black 32[...]

Appendix A. Drawings Figure A-6. USB HID IntelliHead, 3-Track, 1 25mm Wire, 5-pin Molex connector, 43mm rail 33[...]

USB HID IntelliHead S w ipe Reader Figure A-7. USB HID IntelliHead, 3-Track, 125mm Wire, 5-pin Connector, 90mm rail 34[...]

Appendix A. Drawings Figure A-8. USB HID IntelliHead, 3-Track, 125 mm Wire, 5-pin Molex Connector, 60mm Slim Profile 35[...]

USB HID IntelliHead S w ipe Reader 36 Figure A-9. USB HID IntelliHead, 3-Track, 125 mm Wire, 5-pin Molex Connector, 90mm Slim Profile[...]