Brother 1435 manual

Quick Setup Guide HL-1430 / HL-1435 Read this Quick Setup Guide before using the printer. Before you can use the printer, yo u must set up the hardw are and install the driver . For the latest driver and t o find the best soluti on for your problem or questi on, access the Brother Solutions Ce nter directly from the CD -ROM/Driver or go to http ://[...]

Safety Precautions Warning To Use the Printer Safely Warning Note Hint User's Guide Indicates warnings th at must be observed to prevent po ssible personal injury . Indicates cautions that must be observed to use the printer pr operly or prevent dam age to the printer. Indicates note s and useful tips to remembe r when using the printer. Indic[...]

1 Table of Contents Regulations ........... ................ ................. ................................ ............................... 2 ■ Getting Started Carton Components ........... ...................................................................... ............ 4 Control Panel ............... ................ ................. ...[...]

2 Federal Communicatio ns Commission (FCC) Declaratio n of Conformity (For USA) Responsible Party: Brother International Corporation 100 Somerset Corpor ate Boulevard P.O. Box 6 911 Bridgewater, NJ 08807-0 911 USA Telephone: (908) 704-1700 declares, that t he products Product name: Laser Printer HL-14 30, HL-1435 Model number: HL-14 complies with P[...]

3 FDA Regulations (100 to 1 20 volt Model Only) U.S. Food and Drug Administration (FDA) has implemented regulations for laser products manufactured on and afte r August 2, 1976. Compliance is mandatory for products marketed in the Unite d States. One of the follo wing labels on the back of the printer indicates compliance with the FDA regulations a[...]

4 ■ Getting Started Carton components may diff er from one countr y to another. Save all packing materia ls and the printer carton. Carton Components Printer CD-ROM (including User's Guide) Quick Setup Guide Drum Unit Assembly (with Toner Cartridge included) AC Power Cord ■ The interface cable is not a st andard accessory. Please purchase [...]

5 Printer LED Indications : Blinking : ON : OFF Control Panel Button Cancel Printing Press th e button one time and the printer will stop printing and eject th e pa p er Reprinting When the Data LED is off, pr ess and ho ld the button until all the LEDs light. The printer will reprint the last job. Printer LED Sleep / OFF Warming Up Ready Receiving[...]

6 You can find a variety of information on the CD-ROM. Supplied CD-ROM 2 1 4 5 6 1 3 4 5 2 6 1 Initial Setup Instructiona l movie fo r pr in te r setu p an d dr ive r inst alla tio n. 2 Install Software Installs the printer driver and utilities. 3 Documentation View the Prin ter User's Guid e and Quick Se tup Guide in PD F format. (Viewer incl[...]

7 Setting Up Your Printer Do NOT connect the interface ca ble. Connecting the interface cable is done when installing the driver. 1 Insert the CD-ROM into your CD-ROM drive. The opening screen will appear automatically. Follow the on-screen instructions. 2 Click the Initial Setup icon on the menu screen. 3 You can view the Initial Setup instruction[...]

8 Setting Up Your Printer Do NOT connect the inte rface cable. Connecting the interface cable is done when installing the driv er. 1 Open the front cover. 2 Unpack the drum unit assembly. Remove the protective part. 3 Rock it from side to side several times to distribute the toner evenly inside th e assembly. 4 Put the drum unit assembly into the p[...]

9 1 Pull the paper tray completely out of the printer. 2 While pressing the paper guide release lever, slide the adjusters to fit the paper size. Check that the guides are firmly in the slots. 3 Fan the stack of paper well to avoid paper jams and misfeeds. 4 Put paper in the paper tray. Check that the paper is flat in the tray and below the maximum[...]

10 Setting Up Your Printer Do NOT connect the inte rface cable. Connecting the interface cable is done when installing the driv er. 1 Make sure that the printer power switch is off. 2 Connet the AC power cord to the printer, and then plug the AC power cord in to an AC outlet. 3 Turn the power switch on. 4 After the printer has finished warming up, [...]

11 Setting Up Your Printer Windows ® USB Windows ® Parallel Macintosh ® USB Installing the Driver Follow the appropriate instructi ons on this page for your operat ing system and in terface cable. The screens for Windows ® in this Quick Setup Gu ide are based on Windows ® XP. The screens for Mac ® OS X in this Quick Set up Guide are based on [...]

12 Installing the Driver 1. Installing the Driver and Conn ecting the Printer to Your PC 1 Make sure the USB interface cable is NOT connected to the printer, and then beg in installing the driver. If you have already connected the cable, remove it. 2 Click Connect the interface cable & Install the driver/utility from the Initial Setup menu. 3 S[...]

13 6 When this screen appears, make sure the printer power switch is on. Connect the USB interface cable to your PC, and then connect it to the printer. Click the Next button. 7 Click the Finish button. For Windows ® 98 / Me us ers: The Setup is now complete. For Windows ® 2000/XP users: Go to "2. Setting Your Printer as the Default Printer&[...]

14 Installing the Driver Connecting the Printe r to Your PC and Installing the Driver 1 Click Connect the interface cable & Install the driver/utility from the Initial Setup menu. 2 Select the Parallel interface . 3 Turn off the printer power switch. 4 Connect the parallel interface cable to your PC, and then connect it to your printer. 5 Turn [...]

15 7 Click the Install button. 8 Click the Next button. Follow the on-screen instructions. 9 Click the Finish button. The Setup is now complete. Setting Up Your Printer Windows ® Parallel Installing the Driver[...]

16 Installing the Driver Installing the Driver & Connecting the Printer to your Macintosh 1 Click Connect the interface cable & Install the driver/utility from the Initial Setup menu. 2 Follow the on-screen instructions, and restart your Macintosh. 3 Make sure the printer power switch is on. 4 Connect the USB interface cable to your Macinto[...]

17 Installing the Driver & Connecting the Printer to your Macintosh 1 Click Connect the interface cable & Install the driver/utility from the Initial Setup menu. 2 Click the Install button, and follow the on-screen instructions. 3 Make sure the printer power switch is on. 4 Connect the USB interface cable to your Macintosh, and then connect[...]

18 Installing the Driver 7 Open the Print Center icon. 8 Click the Add Printer... button. 9 Select USB . 0 Select HL-14XX series , and then click the Add button. A Select Quit Printer Center from the Printer Center menu. The setup is now complete. For USB Interface Cable Users Step 2[...]

19 ■ Other Information If for any reason you must ship your Printer, carefully package t he Printer in the original packing to avoid any dam age during transit. It is strongly recommended that you save and use the original packaging. The Printer should al so be adequately insure d with the carrier. When shipping the Printer, the DRUM UNIT assembl[...]

20 ■ Options You can expand the capability of the printer by adding IR-1000. Options User's Guide Chapter 4. Ir-DA Interface (Windows ® 95/98/2000/Me and Windows NT ® 4.0 only) IR-1000 The IR-1000 connects to the parallel interface for in frared wireless printin g. Optional accessories may differ from one country to anot her.[...]

©2003 Broth er Industries, L td. LJ72260 01 Printed in China[...]