Bounty Hunter 202 manual

OWNER’S MANUAL Y our Pioneer 202 Metal Detector incorporates patented microprocessor- controlled technology . The Pioneer 202 is a motion detector; movement over an object is required in order for the machine to detect the object and emit a tone. Alternatively , you can sweep a metal object over a motionless search coil. THIS MET AL DETECTOR HAS [...]

2 INTRODUCTION Y our Pioneer 202 is an advanced technology metal detector , designed for a variety of applications including coinshooting, relic hunting, and general purpose detecting. Before using your Pioneer 202, it is important to read these instructions. This manual's description of detection concepts and types of metals is necessary to a[...]

3 T ABLE OF CONTENTS ASSEMBL Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 S-Rod Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Mounting the Coil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 INST ALLING BA TTERIES . . . . . . . . . . . . . . . . . . [...]

4 EASY ASSEMBL Y Search Coil Search Coil Cable Upper Stem Control Housing Plug Lower Stem Assembling your Pioneer 202 Metal Detector is easy and requires no tools. Just follow these steps: ● 1 Using the supplied bolt and knurled knob, attach the search coil to the lower stem. ● 2 If your model is equipped with a 3- piece stem, open the plastic [...]

5 BA TTERIES IMPORT ANT : Always use ALKALINE batteries for optimal performance. Always remove the batteries for prolonged storage. CHECK THE BA TTERIES if your detector exhibits any of the following symptoms: ● 1 The unit does not turn on. ● 2 Low speaker volume. ● 3 Unable to tune detector with the discriminate knob. The Low Battery indicat[...]

6 PIONEER 202 DEMONSTRA TION Here is a quick way to demonstrate the basic features of your PIONEER 202. I. Supplies Needed • A quarter (25¢) • A penny (1¢) • A dime (10¢) • A nickel (5¢) • Small piece of aluminum foil • A nail II. Position your Pioneer 202 • Place the detector on a table, with the search coil hanging over the edge[...]

7 TURNING ON YOUR DETECTOR T urn the left knob (SENSITIVITY) to the right. As the knob clicks to the "On" position, the detector sounds three beeps, the LCD arrows appear momentarily , and the unit pre-sets to the DISC/ALL MET AL mode of operation. SET THE MODE 1. ALL MET AL A. Press the DISC/ALL MET AL touchpad B. T urn the right knob (D[...]

8 LCD T ARGET DISPLA Y READING THE DISPLA Y The Liquid Crystal Display (LCD) shows the PROBABLE identification of the targeted metal, as well as the PROBABLE depth of the target, in inches. Pass the search coil repeatedly over a target, and observe the target readout. The detector will register a repeated, unchanging target identification when a bu[...]

9 BA TTER Y & DEPTH INDICA TORS The LOW BA TT indicator will flash as the unit is powered on. If the indicator comes on and stays on, replace the batteries. DEPTH INDICA TOR: The Depth Indicator is accurate for coin-sized objects. It indicates the depth of the target, in inches. Large and irregularly-shaped objects will yield less reliable dept[...]

10 SENSITIVITY ADJUSTMENT The principle use for the SENSITIVITY knob is to eliminate ELECTROMAGNETIC INTERFERENCE (EMI). EMI is both naturally-occurring and man-made. Common sources of EMI are power lines, both suspended and buried, and broadcasting antennas. Machinery , when in operation, can also produce EMI. EMI comes from most household applian[...]

ALL MET AL MODE: There are two ways to enter the ALL-MET AL mode. 1) T urn the right knob (Disc/Notch) left to the furthest counterclockwise position. Then Press the Disc/All Metal touch pad. or 2) T urn the right knob (Disc/Notch) left to the furthest counterclockwise position. Then turn the detector on. (The detector always defaults to the Disc/A[...]

12 MODES OF OPERA TION AUTO NOTCH T OUCHP AD IRON 5¢ PT AB SCAP ZINC 10¢ 25¢ 50¢ 1¢ SELECTIVEL Y “NOTCH OUT” THESE NOTCH then gives the user a variable rejection window . In this mode, you can eliminate items in the middle of the metallic spectrum, but still detect items to the left of the scale, as follows: NOTCH is most useful to “notc[...]

13 AUDIO T ARGET ID Depending on the operating mode and Disc/Notch control setting, the Pioneer 202 emits three distinct tones which classify metal objects into categories. IRON & STEEL: In the DISCRIMINA TION mode most iron and steel objects will induce a low tone. Highly oxidized iron can induce a high tone, depending on the Disc/Notch contro[...]

14 IN THE FIELD TECHNIQUES When pinpointing a target, try drawing an “X”, as illustrated, over where the tone is induced. PINPOINTING Accurate pinpointing takes practice and is best accomplished by “X-ing” the target area. 1. Once a buried target is indicated by a good tone response, continue sweeping the coil over the target in a narrowing[...]

15 IN THE FIELD TECHNIQUES After selecting your operating mode, swing the search coil gently side-to- si d e, s li g ht l y overlapping each sweep as you move forward. Make sure you keep your search coil approximately 1 inch above the ground as you search. Raising it in the sweep, or at the ends of your sweep, will cause fa lse r ea d- ings. Move s[...]

16 MET AL DETECTING APPLICA TIONS COINSHOOTING: The most popular metal detecting application. When coinshooting, you want to discriminate out pull tabs, screw caps, and iron objects. Beware that highly oxidized steel may also be detected. Control settings required. 1) Press DISC/ALL MET AL touch pad. 2) T urn the Disc/Notch Knob to the 3:00 positio[...]

ACCESSORIES MAXIMIZE YOUR METAL DETECTING EXPERIENCE WITH THESE OPTIMAL BOUNTY HUNTER ACCESSORIES 10 INCH COIL For maximum depth detection. 4 INCH COIL Great for searching in trashy areas with its smaller target area. Also perfect for gold prospecting and fitting into tight spaces. CARR Y BAG Custom-sized to carry your Commando. HEADPHONES Increase[...]

18 TROUBLESHOOTING TROUBLE SHOOTING GUIDE SYMPTOM CAUSE SOLUTION Detector chatters • Using detector • Use detector or beeps erratically indoors outdoors only • Using detector near • Move away power lines from power lines • Using 2 detectors in • Keep 2 dete ctors cl ose p ro xi mi ty at least 20’ apart • Highly oxidized • Only dig[...]

19 CARE AND MAINTENANCE Y our Pioneer 202 Metal Detector is an example of superior design and craftsmanship. The following suggestions will help you care for your metal detector so you can enjoy it for years to come. Handle the metal detector carefully . Dropping it can damage circuit boards and cases. Use and store the metal detector in normal tem[...]

TREASURE HUNTER’S CODE OF ETHICS: • Always check Federal, State, County and local laws before searching. • Respect private property and do not enter private property without the owner’ s permission. • T ake care to refill all holes and try not to leave any damage. • Remove and dispose of any and all trash and litter found. • Appreciat[...]