Bosch Appliances 5000 IP manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118

Ir para a página of

Bom manual de uso

As regras impõem ao revendedor a obrigação de fornecer ao comprador o manual com o produto Bosch Appliances 5000 IP. A falta de manual ou informações incorretas fornecidas ao consumidor são a base de uma queixa por não conformidade do produto com o contrato. De acordo com a lei, pode anexar o manual em uma outra forma de que em papel, o que é frequentemente utilizado, anexando uma forma gráfica ou manual electrónicoBosch Appliances 5000 IP vídeos instrutivos para os usuários. A condição é uma forma legível e compreensível.

O que é a instrução?

A palavra vem do latim "Instructio" ou instruir. Portanto, no manual Bosch Appliances 5000 IP você pode encontrar uma descrição das fases do processo. O objetivo do manual é instruir, facilitar o arranque, a utilização do equipamento ou a execução de determinadas tarefas. O manual é uma coleção de informações sobre o objeto / serviço, um guia.

Infelizmente, pequenos usuários tomam o tempo para ler o manual Bosch Appliances 5000 IP, e um bom manual não só permite conhecer uma série de funcionalidades adicionais do dispositivo, mas evita a formação da maioria das falhas.

Então, o que deve conter o manual perfeito?

Primeiro, o manual Bosch Appliances 5000 IP deve conte:
- dados técnicos do dispositivo Bosch Appliances 5000 IP
- nome do fabricante e ano de fabricação do dispositivo Bosch Appliances 5000 IP
- instruções de utilização, regulação e manutenção do dispositivo Bosch Appliances 5000 IP
- sinais de segurança e certificados que comprovam a conformidade com as normas pertinentes

Por que você não ler manuais?

Normalmente, isso é devido à falta de tempo e à certeza quanto à funcionalidade específica do dispositivo adquirido. Infelizmente, a mesma ligação e o arranque Bosch Appliances 5000 IP não são suficientes. O manual contém uma série de orientações sobre funcionalidades específicas, a segurança, os métodos de manutenção (mesmo sobre produtos que devem ser usados), possíveis defeitos Bosch Appliances 5000 IP e formas de resolver problemas comuns durante o uso. No final, no manual podemos encontrar as coordenadas do serviço Bosch Appliances na ausência da eficácia das soluções propostas. Atualmente, muito apreciados são manuais na forma de animações interessantes e vídeos de instrução que de uma forma melhor do que o o folheto falam ao usuário. Este tipo de manual é a chance que o usuário percorrer todo o vídeo instrutivo, sem ignorar especificações e descrições técnicas complicadas Bosch Appliances 5000 IP, como para a versão papel.

Por que ler manuais?

Primeiro de tudo, contem a resposta sobre a construção, as possibilidades do dispositivo Bosch Appliances 5000 IP, uso dos acessórios individuais e uma gama de informações para desfrutar plenamente todos os recursos e facilidades.

Após a compra bem sucedida de um equipamento / dispositivo, é bom ter um momento para se familiarizar com cada parte do manual Bosch Appliances 5000 IP. Atualmente, são cuidadosamente preparados e traduzidos para sejam não só compreensíveis para os usuários, mas para cumprir a sua função básica de informação

Índice do manual

  • Página 1

    DINION capture 5000 IP NER Series en Installation Manual[...]

  • Página 2

    [...]

  • Página 3

    DINION capture 5000 IP Table of Cont ents | en 3 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 T able of Contents 1S a f e t y 7 1.1 Safety precautions 7 1.2 Important safety instructions 8 1.3 Important notices 11 1.4 FCC & ICES compliance 15 1.5 Bosch notices 17 2 Description 18 2.1 Parts List 18 3 Installing the DINION cap[...]

  • Página 4

    4 en | Table of Contents DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 5.2.1 Password protection in camera 38 5.3 Protected network 38 5.4 Connecting to a hardware decoder 39 5.4.1 Alarm connection 39 5.5 Connection established 40 5.5.1 LIVEPAGE 40 5.5.2 RECORDINGS 40 5.5.3 SETTINGS 41 6 Operation via th[...]

  • Página 5

    DINION capture 5000 IP Table of Cont ents | en 5 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.2.1 Identification 56 8.2.2 Password 56 8.2.3 Date/Time 58 8.2.4 Display Stamping 59 8.3 Web Interface 61 8.3.1 Appearance 61 8.3.2 LIVEPAGE Functions 62 8.3.3 Logging 63 8.4 Camera 64 8.4.1 Mode 64 8.4.2 ALC 66 8.4.3 Shutter/AGC 67 8[...]

  • Página 6

    6 en | Table of Contents DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.8.1 Network Access 105 8.8.2 Advanced 109 8.8.3 Multicast 110 8.8.4 FTP Posting 112 8.8.5 Encryption 113 8.9 Service 113 8.9.1 Maintenance 113 8.9.2 Licenses 115 8.9.3 System Overview 115 A Dimensional Drawings 116[...]

  • Página 7

    DINION capture 5000 IP Saf e ty | en 7 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 1S a f e t y 1.1 Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock, serious bodily injur[...]

  • Página 8

    8 en | Safety DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 1.2 Impor tant safety instr uctions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions be fore operati ng the unit. 1. Cleaning - Unplug the uni[...]

  • Página 9

    DINION capture 5000 IP Saf e ty | en 9 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8. Power disconnect - Units have power supplied to the unit whenever the power cord is inserted into the power source. The power cord plug is the main power disconnect device for switching off the voltage for all units. 9. Power sources - Operate[...]

  • Página 10

    10 en | Safety DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 12. Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteristics as the original parts. Unauthorized substitutions may cause fire, electrical shock, or other haza[...]

  • Página 11

    DINION capture 5000 IP Saf e ty | en 11 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 1.3 Impor tant notices All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at le ast 3 mm in each pole, into the electrical installation of the buildi ng. I f it is neede d to op en the housing for servicin[...]

  • Página 12

    12 en | Safety DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . The Exposure Hazard Value fo r the product (ratio of the Exposure level to the Exposure limit) is up to 1.8 at a test distance of 200 mm or 8 inches. The Hazard Distance (distance beyond which the product falls in to the exempt/safe group) is a[...]

  • Página 13

    DINION capture 5000 IP Saf e ty | en 13 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible. Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoid e[...]

  • Página 14

    14 en | Safety DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . Power lines: An outdoor system should not be located in the vicinity of overhead power lin es, electrical lights, or power circuits, or where it may contac t such power lines or circuits. When installing an outdoor system, extreme care should b[...]

  • Página 15

    DINION capture 5000 IP Saf e ty | en 15 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 1.4 FCC & ICES compliance FCC & ICES Information (U.S.A. and Canadian Models Only) This device complie s with part 15 of the FCC Rules . Operation is subject to the follo wing conditions: – this device may not cause harmful interferenc[...]

  • Página 16

    16 en | Safety DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . – cet appareil ne pe ut pas provoquer d'interfé rence nuisible et – cet appareil doit pouvoir to lérer toutes les interfé rences auxquelles il est soumit, y co mpris les interférences qui pourraient in fluer sur son bon fonctionnem[...]

  • Página 17

    DINION capture 5000 IP Saf e ty | en 17 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 1.5 Bosch notices Video loss Video loss is inherent to digital video recordin g; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information[...]

  • Página 18

    18 en | Description DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 2 Description The DINION capture is a specialt y camera designed to capture consistent, high-quality images of vehicle license plates. Availa ble in IP and analo g versi o ns, it is ideal for monitoring parking lots, public areas, and for [...]

  • Página 19

    DINION capture 5000 IP Installing the DINION cap ture | en 19 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 3 Installing the DINION capture This section provides instructio ns for mounting and wiring the DINION capture. 3.1 Determining the Range The DINION capture has a reco mmended operation range with specified optimal capture [...]

  • Página 20

    20 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . Ta b l e 3 . 1 Ranges for DINION capture 5000 IP Imagers 3.2 Determining the Angle The maximum mounting angle of th e license plate camera to the car is 40° for speeds up to 160 km/h (100 mph), both horizontally and vert[...]

  • Página 21

    DINION capture 5000 IP Installing the DINION cap ture | en 21 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Figu re 3.1 Recommended V er tical and Ho rizontal Mounting Angle If the maximum range is exceed ed, then the letters become smaller and more difficult to read. At the maximum range and angle the width of the number plate c[...]

  • Página 22

    22 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . should be anchored in concrete or welde d to a steel backer plate. Refer to the MBE Mounts an d Adapters Inst allation Guide for more details about attaching th e bracket to an MBE-15 Pole Mount Adapter or to the MBE-17 W[...]

  • Página 23

    DINION capture 5000 IP Installing the DINION cap ture | en 23 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 6. Adjust the tilt angle of the ca mera by loosening the tilt bolt (item 1, below) with the 5 mm hex key and the set screw (item 2) with a flat head screwdriver. 7. P lace the license plate camera at the desired tilt angle [...]

  • Página 24

    24 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 3.4 Preparing the Wiring The DINION capture 5000 IP is pre-wired with a 2-m long p ower input lead and 10/100 Ethernet cable with a male RJ45 connection. The DINION capture 5000 IP can accept power via the Ethernet cable [...]

  • Página 25

    DINION capture 5000 IP Installing the DINION cap ture | en 25 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 3.4.1 Power Input Connections A voltage regulator circuit allows for DC or AC operation between 11-30 VDC and 24 VAC. It also provides protection from voltage surges, transient spikes, and revers ed voltage. Connect power f[...]

  • Página 26

    26 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 3.5 Making the Connections The easiest way to connect the cables is as follows: 1. Bring the building connections through the surface cable hole so that they hang clear. 2. Connect the Ethernet cable wi th connector to RJ[...]

  • Página 27

    DINION capture 5000 IP Installing the DINION cap ture | en 27 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 3.6 Connecting to a Coax Cable You can temporarily connect the DINION capture 5000 IP to a monitor via a coax cable to view the transmitted image for setup and testing purposes. 1. Remove the four (4) hex socket screws from[...]

  • Página 28

    28 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 3. Connect the other end of the coax cable to a monitor. 4. Ensure that power is restored to the imager. 5. Press and hold the center ke y (item 2) for approximately two seconds. The BNC video ou tput is activated and the[...]

  • Página 29

    DINION capture 5000 IP Installing the DINION cap ture | en 29 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 1. Remove the back panel of the DINION capture 5000 IP. Refer to Section 3.6 Connecting to a Coax Cabl e, page 27 for instructions. 2. Slide the SD card into the sl ot, located near the center of the imager. 3. Replace the [...]

  • Página 30

    30 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 1. Remove the back panel. Refer to Section 3.6 Conne cting to a Coax Cable, page 27 for instructions. 2. Locate the reset button, towa rds the center of the imager. 3. With the power on, press and hold the re set button f[...]

  • Página 31

    DINION capture 5000 IP Installing the DINION cap ture | en 31 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Mode Details Mode 2 (FullSun) is two (2) gain points less than the normal mode, by default. You can modify both mode se ttings as needed in order to provi de the desired image throughout the day. When modifying settings, fi[...]

  • Página 32

    32 en | Installing the DINION capture DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 3. Navigate to the Livepage for the camera (refer to Section 6 Operation via the browser, page 42 ) and obser ve the Input 1 symbol. 4. Slowly turn the potentiometer counter-clockwise until the Input 1 symbol lights up. T[...]

  • Página 33

    DINION capture 5000 IP Configuration | en 33 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 4 Configuration Configuration of the DINION capture 5000 IP is carried out remotely via the network using a web browser. However, the license plate camera also has a set-up menu in which basic installation settings can be accesse d. To view[...]

  • Página 34

    34 en | Configuration DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 4.2.1 Pre-Defined Modes There are six operating modes se ttings to make configuration easier. Normal and FullSun mod es are pre-programmed to work with Automatic Mode Switching. Any one of the six modes can be selected as the "switc[...]

  • Página 35

    DINION capture 5000 IP Configuration | en 35 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 4.2.2 Lens Wizard submenu NOTICE! Lens is factory calibrated and does not require any adjustments. Item Selection Description Lens type Auto, Manual, DC- iris, Video Auto: automatically selects the type of lens. Manual, DC-iris, Video modes[...]

  • Página 36

    36 en | Configuration DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 4.2.3 Network submenu To operate the DINION capture 5000 IP in your network, a network-valid IP address must be as signed. The factory default IP address is 192.168.0.1. The new IP address, subnet mask, and gateway address are set when l[...]

  • Página 37

    DINION capture 5000 IP Brow ser connection | en 37 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 5 Brows er connection A computer with Microsoft Internet Ex plorer can be used to receive live images from the camera, control cameras, and replay stored sequences. The ca mera is configured over the network using the brows er (or vi [...]

  • Página 38

    38 en | Brow ser connection DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 5.2 Establishing the connection The DINION capture 5000 IP must be ass igned a valid IP address to operate on your ne twork. The default address pre- set at the factory is 192.168.0.1 1. Start the Web browser. 2. Enter the IP addre[...]

  • Página 39

    DINION capture 5000 IP Brow ser connection | en 39 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 5.4 Connecting to a hardware decoder A compatible H.264 hardware deco der with a monitor can be connected to the camera using an Ethernet network connection. Cameras are design ed to automatically connect with other BVIP devices with [...]

  • Página 40

    40 en | Brow ser connection DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 5.5 Connection established When a connection is established, the LIVEPAGE is initially displayed. The application titl e bar displays three items: LIVEPAGE , RECORDINGS , SETTINGS . Note: The RECORDINGS link is only visible if a st[...]

  • Página 41

    DINION capture 5000 IP Brow ser connection | en 41 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 5.5.3 SETTINGS Click SETTINGS in the application title bar to configure the camera and the application interface. A new page containing the configuration menu is opened . All settin gs are stored in the camera memory so that they are [...]

  • Página 42

    42 en | Operation via the browser DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 6 Oper ation via the brow ser 6.1 Liv epage After the connection is established, the Livepage is initially displayed. It shows the live video image on the right of the browser window. Depending on th e configuration, various [...]

  • Página 43

    DINION capture 5000 IP Operation via the bro wser | en 43 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 6.1.2 Image selection View the image on a full screen. – Click a tab below the video image to switch between the different display streams of the camera image. Display Stamping Various overlays in the video image provide impo[...]

  • Página 44

    44 en | Operation via the browser DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 6.1.3 Digital I/O Depending on the configuration of the unit, the alarm input and the relay output are displayed ne xt to the camera image. The alarm symbol is for information and indicates the input status of the alarm input[...]

  • Página 45

    DINION capture 5000 IP Operation via the bro wser | en 45 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 6.1.5 Saving snapshots Individual images from the vide o sequence that is currently being shown on the Livepage can be saved in JPEG format on the computer 's hard drive. – C lick the camera icon to save single images. T[...]

  • Página 46

    46 en | Operation via the browser DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 6.1.8 Audio communication Audio can be sent and received via the Livep age if the active monitor and the remote station of the camera support audio. 1. Press and hold the F12 key to send an audio signal to the camera. 2. Rele[...]

  • Página 47

    DINION capture 5000 IP Operation via the bro wser | en 47 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 6.2 Recordings page Click Recordings to access the Recordings page from the Livepage or Settings page (the Recordings link is only visi ble if a storage medium has been selected). Selecting Recordings All saved sequences are di[...]

  • Página 48

    48 en | Operation via the browser DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . The time bar offers various options fo r navigation in and between sequences. – Change the time interval displayed by clicking the plus or minus icons. The display can span a range from two months to a few seconds. – If r[...]

  • Página 49

    DINION capture 5000 IP Basic Mode | en 49 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 7 Basic Mode 7.1 Basic Mode menu tree The basic mode configuration menu allows a set of basic camera parameters to be configured. To view the current settings: 1. If necessary, click the Basic Mode menu to expan d it. The sub-menus are display[...]

  • Página 50

    50 en | Basic Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 7.2 Device A ccess 7.2.1 Camera name Assign a name to assist in iden tif ication. This name simplifies the management of multiple devices in more extensive systems. The name is used for remote iden tification, for example, in the event of a[...]

  • Página 51

    DINION capture 5000 IP Basic Mode | en 51 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Confirm password Re-enter the new password to en sure that there are no ty ping mistakes. The new password is only saved after clicking Se t . Therefore, click Set immediately after entering and confirming the password, even if assigning a pas[...]

  • Página 52

    52 en | Basic Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 7.4 Network Use the settings on this page to integrate the device into a network. Some changes only take effect after a reboot. In this case, the Set button changes to Set and Reboot . 1. Make the desired changes. 2. Click Set and Reboot . [...]

  • Página 53

    DINION capture 5000 IP Basic Mode | en 53 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 7.5 Encoder Select a profile for encoding the video signal. Pre-programmed profiles are available that give pr iority to different parameters. When a profile is selected, its details are displayed. 7.6 Recording Record the images from the came[...]

  • Página 54

    54 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8 Advanced Mode 8.1 Advanced Mode menu tr ee The advanced mode configuration menu contains all camera parameters that can be configured. To view the current settings: 1. Click the Advanced Mode menu to expand it. The associated menu sub-[...]

  • Página 55

    DINION capture 5000 IP Advanced Mode | en 55 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Note: Device time settings are lost af ter 1 hour without power if no central time server is selected. Note: When entering names do not us e any special ch aracters, for example & . Special characters are not supported by the internal r[...]

  • Página 56

    56 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.2 G eneral 8.2.1 Identification Camera ID Each device should be assigned a unique identifier that can be entered here as an addition al means of identification. Camera name Assign a name to assist in iden tif ication. This name simplif[...]

  • Página 57

    DINION capture 5000 IP Advanced Mode | en 57 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 – live is the lowest authorization le vel. It can only be used to view the live video image and switch between the different live image displays. Use the various authorization le vels to limit access. Proper password protection is only gu[...]

  • Página 58

    58 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.2.3 Date/Tim e Date format Select the required date format. Device date / Device time If there are multiple devices operating in your system or network, it is important to sync hronize their inter nal clocks. For example, it is only po[...]

  • Página 59

    DINION capture 5000 IP Advanced Mode | en 59 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 5. Click one of the entries in th e table to make changes. The entry is highlighted. 6. Click Delete to remove the entry from the table. 7. Choose other values from the list boxes under the table, to change the selected entry. Changes are i[...]

  • Página 60

    60 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . If the Custom option is selected, enter values in the X and Y position fields. Time stamping This field sets the position of th e time and date overlay. It can be displayed at the Top , at the Bottom , at a position of choice using the C[...]

  • Página 61

    DINION capture 5000 IP Advanced Mode | en 61 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.3 W eb Inter face 8.3.1 Appearance Adapt the appearance of the web interface and change the website language to meet your requirements. If necess ary, replace the company's logo (top right) and the device name (top left) in the top p[...]

  • Página 62

    62 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.3.2 LIVEPAGE Functions In this window, adapt the Livepage f unctions to meet your requirements. Choose from a vari ety of different options for displaying information and controls. 1. Mark the check boxes for the functions to be displa[...]

  • Página 63

    DINION capture 5000 IP Advanced Mode | en 63 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Allow snapshots Specify whether the icon for saving i ndividual images should be displayed below the live image. Individual images can only be saved if this icon is visible. Allow local recording Specify whether the icon f or saving video s[...]

  • Página 64

    64 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.4 Camera 8.4.1 Mo de Pre-defined m odes The camera has six operating modes that can be selected in the Mode menu. Normal and FullSun modes have been pre- programmed to work with Automatic Mode Switching. Any one of the six modes can be[...]

  • Página 65

    DINION capture 5000 IP Advanced Mode | en 65 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 5. Mode 5 Default settings. 6. Mode 6 Default settings. These modes can be adjusted according to personal preferences. The Mode menu a llows selection and set-up of picture enhancement functions fo r each mode. If the changes are not satisf[...]

  • Página 66

    66 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.4.2 ALC ALC level Adjust the video output level (-15 to 0 to +15). Select the range within which the ALC will operate. A positive value is more useful for low-ligh t conditions; a negative value is more useful for very bright condition[...]

  • Página 67

    DINION capture 5000 IP Advanced Mode | en 67 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.4.3 Shutter/AGC Shutter – Fixed — allows a user-defined shutter speed (recommended setting). – AES (auto-shutter) — the camera automatically sets the optimum shutter speed. The ca mera tries to maintain the selected default shutte[...]

  • Página 68

    68 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . Note: If Sensitivity up is active, some noise or spots may appear in the picture. This is normal camera behavior. Sensitivity up may cause some motion blur on moving obje cts. Gain AGC - the camera automatically se ts the gain to the low[...]

  • Página 69

    DINION capture 5000 IP Advanced Mode | en 69 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 for changing light conditions. Includes all the benefits of 2X Dynamic. Auto black Auto black ON automatically incr eases the visibility of details even when scene contrast is less than full-range due to mist, fog, etc. Sharpness level Adju[...]

  • Página 70

    70 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.4.5 Encoder Profile Adapt the video data transmission to the operating environment (network structure, bandwidth, data structures). The camera simultaneously generates two H.264 video streams and an M-JPEG stream. Select the compressio[...]

  • Página 71

    DINION capture 5000 IP Advanced Mode | en 71 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Profile Configuration Profiles can be configured for use with the H.264 settings of encoder streams. Select a profile by clicking the appropriate tab. Change the name of a prof ile and individual parameter values within a profile. Profiles [...]

  • Página 72

    72 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . advantageous with low bandwidths. The image rate in ips (images per second) is displayed next to the slider. Video r esolution Select the desired resolution for the video image. The following resolutions are available: – CIF 352 × 288[...]

  • Página 73

    DINION capture 5000 IP Advanced Mode | en 73 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 combination of movement and image d efinition (focus). Alternatively, use the slider to set a value between 9 and 51. The value 9 represents the be st image quality with, if neces sary, a lower frame refresh rate depe nding on the settings [...]

  • Página 74

    74 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.4.6 Enco der Streams Select H.264 Settings 1. Select the codec algorithm for streams 1 an d 2. The following algorithms are available – H.264 BP+ bit-rate-limited – H.264 MP SD 2. Select the default profile for streams 1 and 2 from[...]

  • Página 75

    DINION capture 5000 IP Advanced Mode | en 75 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Note: Deactivate the display of the vi deo images if the perfor mance of the computer is adversely affect ed by the decoding of the data stream. JPEG stream Set the parameters for the M-JPEG stream. – S elect the Max. frame rate in images[...]

  • Página 76

    76 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . Note: The audio signals are sent in a separate data stream parallel to the video data, and so increa se the network load. The audio data requires an additional bandwidth of approximately 80 kbps for each connection. If you do not want an[...]

  • Página 77

    DINION capture 5000 IP Advanced Mode | en 77 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.4.9 Installer Menu Ticker bar Switches a ticker bar on the live image on or of f. Camera buttons Disable the Camera buttons on the camera to prevent unauthorized change of the camera settings. Camera LED Disable the Camera LED on the came[...]

  • Página 78

    78 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.5 Recording Record the images from the camera to local storage media or to an appropriately co nfigured iSCSI syst em. For long-term authoritative images use an appr opriately sized iSCSI system. MicroSDHC cards are the ideal solution [...]

  • Página 79

    DINION capture 5000 IP Advanced Mode | en 79 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.5.1 Storage Management Device manager If the VRM option is activated, the VRM Video Recording Manager manages all recording and no further settings can be configured here. Note: Activating or deactivating VRM causes the current settings t[...]

  • Página 80

    80 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . Note: Each storage medium can only be associated with one user. If a storage medium is already being used by another user, decouple the user and connect the drive to the camera. Before decoupling, make absolutely su re that the previous [...]

  • Página 81

    DINION capture 5000 IP Advanced Mode | en 81 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 1. Click a storage medium in the Managed storage media list to select it. 2. Click Edit below the list. A new win dow opens. 3. Click Formatting to delete all recordings in the storage medium. 4. Click OK to close the window. Deactivating S[...]

  • Página 82

    82 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.5.2 Recording Profiles Define up to ten different record ing profile s here, then assign these to individual days or times of day on the Recording Scheduler page. Modify the names of the recording profiles on the tabs in the Recording [...]

  • Página 83

    DINION capture 5000 IP Advanced Mode | en 83 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Alarm recording Select the Pre-alarm time from the list box. Select the Post-alarm time from the list box. Select the Alarm stream to use for alarm recording. Check the with encoding interval fr om profile: box and select a predefined profi[...]

  • Página 84

    84 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.5.4 Recording Scheduler The recording scheduler allows you to link the created recording profiles to the days and times at which the camera's images are to be recorded in th e event of an alarm. Schedules can be defined for weekda[...]

  • Página 85

    DINION capture 5000 IP Advanced Mode | en 85 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Profile names To change the names of the reco rding profiles listed in the Time periods box: 1. Click a profile. 2. Click Rename . 3. Enter the new name and click Rename again. Activate recording After completing configuration, ac tivate th[...]

  • Página 86

    86 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.6 Alarm 8.6.1 Alarm Connections Select the respon se of the camera when an alarm occurs. In the event of an alarm, the device can automatically connect to a pre-defined IP address. The device can contact up to ten IP addresses in the o[...]

  • Página 87

    DINION capture 5000 IP Advanced Mode | en 87 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Only ten passwords can be defined here. Define a general password if more than ten connections are required, for example, when connections ar e initiated by a controlling system such as VIDOS or Bosch Video Management System. The camera con[...]

  • Página 88

    88 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . signal. The connected monitor only displays images when an alarm is triggered. If a particular video output is selected and a split image is set for this output on the receiver, select the decoder from Decoder i n the receiver that is to[...]

  • Página 89

    DINION capture 5000 IP Advanced Mode | en 89 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.6.2 Video Content Analyses (VCA) The camera has integrated VCA which can detect and analyze changes in the signal using image processing algorithms. Such changes can be due to movements in the came ra's field of view. Select various [...]

  • Página 90

    90 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.6.3 VCA configuration- Profiles Configure two profiles with diff erent VCA configurations. Save profiles on your computer's ha rd drive and load saved profiles from there. This can be useful if testing a number of differe nt confi[...]

  • Página 91

    DINION capture 5000 IP Advanced Mode | en 91 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering. Metadata is always created for a video content analysis, unless this was e[...]

  • Página 92

    92 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . environmental conditions to which the camera is subject. The sensor reacts to variations in the brightness of the video image. The darker the observation area, the higher the value that must be selected. Minimum object size Specify the n[...]

  • Página 93

    DINION capture 5000 IP Advanced Mode | en 93 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Tamper detection Detect tampering of cameras and video cables by means of various options. Run a series of tests at differe nt times of the day and night to ensure that th e video sensor is operating as intended. Sensitivity and Trigger del[...]

  • Página 94

    94 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . Scene too bright Activate this function if tamperi ng associated with exposure to extreme light (for instance, shining a flashlight directly on the objective) should trigger an al arm. The average brigh tness of the scene provides a ba s[...]

  • Página 95

    DINION capture 5000 IP Advanced Mode | en 95 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 would not trigger an alarm, then an alarm is triggered immediately to indicate the inadequate reference image. Appearing edges Select this option if the selected area of the reference image includes a largely homogenous surf ace. If structu[...]

  • Página 96

    96 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.6.4 VCA configuration - Scheduled A scheduled configuration allows you to link a VCA profile with the days and times at which the vi deo content analysis is to be active. Schedules can be defined for weekday s and for holidays. Weekday[...]

  • Página 97

    DINION capture 5000 IP Advanced Mode | en 97 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 3. Click OK . The item is deleted from the table and the window closes. 4. The process must be repeated for deleting additional days.[...]

  • Página 98

    98 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.6.5 VCA configuration - Event triggered This configuration allo ws you to stipulate that the video content analysis is only to be activate d when triggered by an event. As long as no trigger is activated, the Silent MOTION+ configurati[...]

  • Página 99

    DINION capture 5000 IP Advanced Mode | en 99 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.6.6 Audio Alarm Create alarms based on audi o signals. Configure signal strengths and frequency ranges so that false alarms, for example, machine noise or ba ckground noise, are avoided. Set up normal audio transmission before configuring[...]

  • Página 100

    100 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.6.7 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. This makes it possible to notify a recipient who does not have a vide o receiver. In this case, the camera automatically sends [...]

  • Página 101

    DINION capture 5000 IP Advanced Mode | en 101 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 Destination address Enter the e-mail address for al arm e-mails here. The maximum address length is 49 characters. Sender name Enter a unique name for the e-mail sender, for example, the location of the device. This makes it easier to iden[...]

  • Página 102

    102 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.6.8 Alarm Task Editor Editing scripts on this page ov erwrites all settings and en tries on the other alarm pages. This procedure cannot be re versed. To edit this page, you should have programming knowledge and be familiar with the i[...]

  • Página 103

    DINION capture 5000 IP Advanced Mode | en 103 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.7 Inter faces 8.7.1 Alarm input Configure the alarm triggers for the camera. Select N.C. (Normally Closed) if the al arm is to be triggered by closing the contact. Select N.O. (Normally Open) if the alarm is to be triggered by opening th[...]

  • Página 104

    104 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . configured to display the name next to the relay icon. (Do not use any special characters, for example &.) Trigger relay Click the button to switch the re lay manually (for example, for testing purposes or to operate a door opener).[...]

  • Página 105

    DINION capture 5000 IP Advanced Mode | en 105 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.8 Net work 8.8.1 Network Access The settings on this page are used to integrate the device into a network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot . 1. Make the desired changes. 2. Click S[...]

  • Página 106

    106 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . Subnet mask Enter the appropriate subnet mask for the set IP address. Gateway address For the device to establish a connection to a remote l ocation in a different subnet, enter the IP address of the gateway here. Otherwise, this field [...]

  • Página 107

    DINION capture 5000 IP Advanced Mode | en 107 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 deactivates all unencrypted conne ctions allowing connections on the HTTPS port only. Configure and activate encryption for medi a data (video, audio, metadata) on the Encryption page. RCP+ port 1756 Activating RCP+ port 1756 allo ws unenc[...]

  • Página 108

    108 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . obtain an account with DynDNS.org and register the required host name for the device on that site. Note: Information about the service, registration process, and the available host names can be found at DynDNS.org. Host nam e Enter the [...]

  • Página 109

    DINION capture 5000 IP Advanced Mode | en 109 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.8.2 Advanced The settings on this page are us ed to set advanced settings for the network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot . 1. Make the desired changes. 2. Click Set and Reboot . [...]

  • Página 110

    110 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . RTSP port If necessary, select a differen t port from the list for the exchange of the RTSP data. Th e standard RTSP port is 554. Select Off to deactivate the RTSP function. UPnP Select On to activate UPnP communication. Select Off to d[...]

  • Página 111

    DINION capture 5000 IP Advanced Mode | en 111 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 A special IP address (class D address) must be configure d for multicast operation in a multicast-enabled network. The network must support group IP address es and the Internet Group Management Protocol (IGMP V2). The address range is from[...]

  • Página 112

    112 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . 8.8.4 FTP Posting Save individual JPEG images on an FTP server at specific intervals. If required, retrieve these images at a later date to reconstruct alarm events. JPEG resolution corr espond s to the highest setting from the two data[...]

  • Página 113

    DINION capture 5000 IP Advanced Mode | en 113 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 8.8.5 Encryption If an encryption license is ins talled, this submenu gives access to the encryption parameters. 8.9 Ser vice 8.9.1 Maintenance Firmware The camera functions and para meters can be updated by uploading new firmware. To do t[...]

  • Página 114

    114 en | Advanced Mode DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . To update the firmware: 1. First, store the firmware file on your hard disk. 2. Enter the full path for the firmware file in the field or click Browse to locate and select the file. 3. Click Upload to begin transferring the file to the [...]

  • Página 115

    DINION capture 5000 IP Advanced Mode | en 115 Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01 SSL certificate To work with an SSL connection, both sides of the connection must have the appropriate cert ificates. Upload one or more certificate files, one at a time, to the camera. 1. Enter the full path of the file to upload or click[...]

  • Página 116

    116 en | DINION capture 5000 IP | 1.0 | 2012.01 Installation Manual Bosch Securi ty Syst ems, Inc . A Dimensional Dr awings DINION capture 5000 Figure 1.1 DINION capture 5000 – Side View Figure 1.2 DINION capture 5000 – F ront V iew 452 (17.8) 340 (13.3) 263 (10.4) mm (in.) 154 (6.1) 139 (5.5) 307 (12.1) mm (in.)[...]

  • Página 117

    [...]

  • Página 118

    Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc., 2012[...]