ATEN Technology CS-1262 manual

User Manual CS-1262 Read this guide thoroughly and follo w the installation and operation procedures carefully in order to prevent any damage to the unit and/or any devices that connect to it. This package c ontains: M 1 CS-1262 Two Port DVI + Audio KVM Switch M 2 Custom KVM Cables (Part No. 2L-7D02P) M 1 Power Adapter (DC 5.3V; 2.4A) M 1 User Manu[...]

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation. This equipment generat es, uses and can radiate radio frequency energy, and if not instal[...]

Overview The Master View CS-1262 DVI KVM Switch improves on previous KVM Switch designs by incorporating DVI video and audio. Now, two computers can be accessed and controlled from a single PS/2 keyboard, DVI monitor, and PS/ 2 mouse console. DVI (Digital Visual Interface) supports bot h digit al video input (flat panel displays, data projectors, p[...]

Features M One console controls two computers M DVI digital and analog monitor support - fully compliant with the DVI specification M Audio enabled M Easy to install - no software required - connecting cables to the computers is all it takes M Easy to operate - manual and hotkey computer selection - Auto Scan function to monitor computer operation [...]

Hardware Requirements Console M A DVI monitor M A PS/2 mouse M A PS/2 keyboard Computers The following equipment must be installed on each computer that is to be connected to the system: M A DVI video port M A 6-pin mini-DIN (PS/2 sytle) mouse port M A 6-pin mini-DIN (PS/2 sytle) keyboard port Cables Only CS Custom cable sets specifically designed [...]

Front Panel 1. Port Selection Switch es 2. Port LEDs The Port LEDs are built into the Port Selection Swit ches. The upper ones are the On Line LEDs; the lower ones are the Selected Port LEDs: M An On Line LEDs lights ORANGE to indicate that the computer attached to the corresponding port is up and running. M A Selected LED lights GREEN to indicate [...]

Rear Panel 1. Console Port Secti on The cables from your keyboard, monitor, mouse, microphone, and speakers plug in here. Each port is color coded and marked with an appropriate icon. 2. CPU Port Section The cables that link the switch to your computers plug in here. Each CPU section is comprised of a keyboard, DVI video, mouse, microphone, and spe[...]

Installation Cable Connection To set up your Master View CS-1262 installation, ref er to the installation diagram on the following page (the numbers in the diagrams correspond to the steps, below), and do the following: 1. Plug your keyboard, DVI m onitor, mouse, microphone, and speakers into the Console Ports located on the unit’s rear panel. 2.[...]

- 7 - 1 1 4 2 3 2005-07-01[...]

Operation Hot Plugging The CS-1262 supports hot plugging - components can be removed and added back into the installation by unplugging and replugging their cables without the need to shut the unit down. Powering Off and Restarting If it becomes necessary to Power Off the Master View unit, before starting it back up you must do the following: 1. Sh[...]

Port Switching There are two convenient methods to switch the KVM and Audio focus between the computers: Manual - which involves pressing the pushbutton port selection switches located on the unit’s front panel; and Hotkey - which involves entering combinations from the keyboard. Manual: Press the Port Selection switches as follows: M Press a swi[...]

Auto Scanning The CS-1262’s Auto Scan feature automatically switches the KVM focus between the two computer ports at regular intervals. This allows you to monitor the computer activity without having to take the trouble of switching from port to port manually. See the table below for details. Hotkey Action [Scroll Lock] [Scroll Lock] [A] [Enter] [...]

Hotkey Summary Table Hotkey Action [Scroll Lock] [Scroll Lock] [Enter] Switches the KVM and audi o focus from the port that currently has the KVM focus to the other port (1 to 2; 2 to 1). Note that the KVM and audio focus both go to this port even if they were on different ports to begin with. [Scroll Lock] [Scroll Lock] [K] [Enter] Brings only the[...]

Appendix DVI Pin Assignments Pin Signal Pin Signal 1 TMDS Data2- 16 Hot Plug Detect 2 TMDS Data2+ 17 TMDS Data0- 3 GND 18 TMDS Data0+ 4 N.C. 19 GND 5 N.C. 20 N.C. 6 DDC Clock 21 N.C. 7 DDC Data 22 TMDS Clock Shield 8 Analog Vertical Sync. 23 TMDS Clock+ 9 TMDS Data1- 24 TMDS Clock- 10 TMDS Data1+ C1 Analog Red 11 GND C2 Analog Green 12 N.C. C3 Anal[...]

Specifications Function Specification CPU Ports 2 Port Selection Push bu tton switches; Hotkeys Console Connectors Keyboard 1 x 6 pin mini-DIN F Mouse 1 x 6 pin mini-DIN F Video 1 x DVI-I F Speakers 1 x Earphone jack Microphone 1 x Microphone jack CPU Port Connectors Keyboard 2 x 6 pin mini-DIN F Mouse 2 x 6 pin mini-DIN F Video 2 x DVI-I F Speaker[...]

- 14 - Limited Warranty IN NO EVENT SHALL THE DIRECT VENDO R’S LIABILITY EXCEED THE PR ICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQ UENTIAL DAMAGES RESU LTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION. The direct vendor makes no warranty or r epresentation, expre ssed, implied, or statutory with r[...]