Asus VH236H manual

LCD Monitor User Guide Novem ber 200 8 E 4 331 V1 V H 2 36 /V H 2 3 2 /VH2 02 Series[...]

ii Copyright © 200 8 ASUST eK COMPUTER INC. All Rights Reserved. No part of this ma nual, including the product s and software described in it, may be reproduced, tra nsmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, with[...]

iii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has [...]

iv Safety information • Before setting up the monitor , carefully read all the documentation that came with the package. • T o prevent re or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury . • If the p[...]

v Care & Cleaning • Before you lift or reposition your monitor , it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor . When lifting or carrying the monitor , grasp the edges of the monitor . Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor of[...]

vi Where to nd more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www .asus.com 2. Optional documentation Y our product package may include optional documen[...]

1-1 1.1 Welcome! Thank you for purchasing the ASUS ® The latest widescreen LCD monitor from ASUS provides a crisper , broader , and brighter display , plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual 1.2 Package contents LCD monitor Support CD Quick Start Guide P[...]

1-2 Chapter 1: Product introduction 1.3 Assembling the monitor base T o assemble the monitor base: 1. Connect the base with the monitor. A click indicates that the base has been connected successfully . 2. Adjust the monitor to the angle that is most comfortable for you. We recommend that you cover the table surface with soft cloth to prevent damag[...]

T o assemble the monitor : 2 3 1 4 Open carton, take out base and stand. Remove cushion, take out monitor set Assembly monitor with stand Assembly monitor with base 1- 3 Chapter 1: Product introduction 1.3.2 VH202[...]

1. 4 Connect cables Connect cable s which you need 1.4.1 VH2 36 H/V H 2 3 2H AC-IN port DVI port VGA port HDMI -IN port Earphone - out Port Line - in Port 1 2 3 4 5 6 7 SPDIF Out 1 7 1. 4 .2 VH2 36 S/VH2 3 2 T /VH2 3 2 S /VH2 3 2 D /VH2 0 2 T/VH202N/VH202S/VH202D 2 3 4 5 2 1 3 4 AC-IN port DVI port VGA port Line - in Port 1 2 3 4 (Only for some mod[...]

1. button: • Automatically adjust the image to its optimized position, clock, and phase by long pressing this button for 2-4 seconds (for VGA mode only). • Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID™ Video Enhancement T echnology . • Exit the O[...]

1. button: • Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID™ Video Enhancement T echnology . • Exit the OSD menu or go back to the previous menu as the OSD menu is active. 2. 3. MENU Button: • Press this button to enter/select the icon (function) h[...]

1.5.1. 3 VH2 3 6S /VH2 3 2 S/VH202S 4 5 7 1 2 3 1. button: • Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID™ Video Enhancement T echnology . • Exit the OSD menu or go back to the previous menu as the OSD menu is active. 2. Button: • Press this butt[...]

1.5.1. 4 VH2 3 2D/VH2 0 2D 4. Button: • Press this button to increase the value of the function selected or move to the previous fuction. • This is also a hotkey for Brightness adjustment. 6 . Power button • Press this button to turn the monitor on/off. 5 . 7 . Power indicator • Automatica lly adjust the image to its optimized positio[...]

1. 5 .2 Rear of the LCD monitor Screw holes for VESA Wall Mount AC-IN port DVI port VGA port HDMI -IN port Earphone - out Port Line - in Port 1 2 3 4 5 6 7 SPDIF Out 1.5.2.1 VH2 36 H/VH2 3 2H Rear connectors AC-IN port DVI port VGA port Line - in Port 1 2 3 4 (Only for some models) (Only for some models) 1.5.2.2 VH2 36S /VH2 3 2 T /VH2 3 2 S [...]

2. 1 Detaching the arm/stand (for VESA wall mount) VESA wall mount. 2.1.1 VH236/VH232 T o detach the arm/stand: • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor . • Hold the stand of the monitor when you remove the screws. 2-1 The detachable stand of the VH2 36 /VH2 3 2 /VH202 Series LCD monitor i[...]

2-2 Chapter 2: Setup T o detach the arm/stand: 2.1.2 VH202 1. 2. Have the front of the monitor face down on a table. 3. Press the release button. Detach the arm from the monitor . • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor . The VESA wall mount kit ( 100 mm x 100 mm) is purchased separately . [...]

2. 2 Adjusting the monitor • For optimal viewing, we reco mmend that you look at the full face of th e monitor , then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • Y ou can adjust the monitor’s angle from -5º to 20º. -5º~20º 2-2 Chapter[...]

3-1 3.1 OSD (On-Screen Display) menu 3.1.1 Howtorecongure 1. Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press and again to navigate through the sub-menu functions. Highlig[...]

3-2 Chapter 3: General Instruction • Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances. • Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proporti[...]

3-3 5. SystemSetup Allow you to adjust the system. • V olume: the adjusting range is from 0 to 100. is a hotkey to activate this function. • OSD Setup: adjusts the horizontal postition (H-Position) and the vertical position (V -Position) of the OSD. The adjusting range is from 0 to 100. In the OSD T imeout selection, you can adjust the[...]

3-4 Chapter 3: General Instruction 3.2 Specications summary  Model  V H232H V H232T V H232S V H232D Panel  Size  23"W 23"W 23"W 23"W True  Resolution  1920x1080 1920x1 080 1920x1080 1920x1080 Brightness  (Max.)  ≧ 300cd/ ㎡ ≧ 300cd/ ㎡ ≧ 300cd/ ㎡ ≧ 300cd/ ㎡ Intrisinc  Contrast  Rati[...]

3- 5 Chapter 3: General Instruction 3.2 . 1 Specications summary  Model  V H2 36H Panel  Size  23"W True  Resolution  1920x1080 Brightness  (Max.)  ≧ 300cd/ ㎡ Intrisinc  Contrast  Ratio  ≧ 1000:1 Viewing  Angle  (CR=10)  ≧ 160°(V), ≧ H) Color  Saturation  (NTSC)  72% Display  [...]

 Model V H2 0 2 T V H2 0 2 N V H2 0 2S V H2 0 2D Panel Size 2 0 "W 2 0 "W 2 0 "W 2 0 "W True Resolution 1 60 0x 90 0 1 60 0x 90 0 1 60 0x 90 0 1 60 0x 90 0 Brightness (Max.) ≧ 25 0cd/ ㎡ ≧ 25 0cd/ ㎡ ≧ 25 0cd/ ㎡ ≧ 25 0cd/ ㎡ Intrisinc Contrast Ratio ≧ 1000:1 ≧ 1000:1 ≧ 1000:1 ≧ 1000:1 Viewing Angle (CR=10[...]

3.3 Troubleshooting (FAQ) Problem PossibleSolution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The power LED lights amber and there is no screen image • Check if the monitor and the computer are in the ON mode. • Mak[...]

3- 8 Chapter 3: General Instruction 3. 4 VH2 36 /VH2 3 2 /VH202 PC Supported Timing List VESA  Modes,  Fa c t o r y  Pre set  Timings  Mode  Res ol ut io n  H(KHz)  V(Hz )  Pixel(MHz)  VGA  640x480 31.469 60 25.175 640x480 37.861 72 31.5 640x480 37.5 75 31.5 SVGA  800x600 35.156 56 36 800x600 37.879 60 40 800x600[...]

Chapter 3: General Instruction *Modesnotl istedintheabovet ablesmaynotbesu pported.Foroptima lresolution,werec ommend thatyouchooseamodelistedintheabovetables 3- 9 VESA  Modes ,User Available Timings  Mode  Res ol ut io n  H(KHz)  V(Hz )  Pixel(MHz)  [...]