Apple 160 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149

Ir para a página of

Bom manual de uso

As regras impõem ao revendedor a obrigação de fornecer ao comprador o manual com o produto Apple 160. A falta de manual ou informações incorretas fornecidas ao consumidor são a base de uma queixa por não conformidade do produto com o contrato. De acordo com a lei, pode anexar o manual em uma outra forma de que em papel, o que é frequentemente utilizado, anexando uma forma gráfica ou manual electrónicoApple 160 vídeos instrutivos para os usuários. A condição é uma forma legível e compreensível.

O que é a instrução?

A palavra vem do latim "Instructio" ou instruir. Portanto, no manual Apple 160 você pode encontrar uma descrição das fases do processo. O objetivo do manual é instruir, facilitar o arranque, a utilização do equipamento ou a execução de determinadas tarefas. O manual é uma coleção de informações sobre o objeto / serviço, um guia.

Infelizmente, pequenos usuários tomam o tempo para ler o manual Apple 160, e um bom manual não só permite conhecer uma série de funcionalidades adicionais do dispositivo, mas evita a formação da maioria das falhas.

Então, o que deve conter o manual perfeito?

Primeiro, o manual Apple 160 deve conte:
- dados técnicos do dispositivo Apple 160
- nome do fabricante e ano de fabricação do dispositivo Apple 160
- instruções de utilização, regulação e manutenção do dispositivo Apple 160
- sinais de segurança e certificados que comprovam a conformidade com as normas pertinentes

Por que você não ler manuais?

Normalmente, isso é devido à falta de tempo e à certeza quanto à funcionalidade específica do dispositivo adquirido. Infelizmente, a mesma ligação e o arranque Apple 160 não são suficientes. O manual contém uma série de orientações sobre funcionalidades específicas, a segurança, os métodos de manutenção (mesmo sobre produtos que devem ser usados), possíveis defeitos Apple 160 e formas de resolver problemas comuns durante o uso. No final, no manual podemos encontrar as coordenadas do serviço Apple na ausência da eficácia das soluções propostas. Atualmente, muito apreciados são manuais na forma de animações interessantes e vídeos de instrução que de uma forma melhor do que o o folheto falam ao usuário. Este tipo de manual é a chance que o usuário percorrer todo o vídeo instrutivo, sem ignorar especificações e descrições técnicas complicadas Apple 160, como para a versão papel.

Por que ler manuais?

Primeiro de tudo, contem a resposta sobre a construção, as possibilidades do dispositivo Apple 160, uso dos acessórios individuais e uma gama de informações para desfrutar plenamente todos os recursos e facilidades.

Após a compra bem sucedida de um equipamento / dispositivo, é bom ter um momento para se familiarizar com cada parte do manual Apple 160. Atualmente, são cuidadosamente preparados e traduzidos para sejam não só compreensíveis para os usuários, mas para cumprir a sua função básica de informação

Índice do manual

  • Página 1

    Service Source K Po werBook 160/165/180 Series PowerBook 160, PowerBook 165, PowerBook 180[...]

  • Página 2

    Service Source K Basics Po werBook 160/165/180[...]

  • Página 3

    Basics Overview - 1 Overview This manual includes complete repair procedures for the PowerBook 160, PowerBook 165, and PowerBook 180. Figure: Po werBook 160, 165, 180[...]

  • Página 4

    Basics Repair Strategy - 2 Repair Strategy Service the PowerBook 160, 165, and 180 through module exchange and parts replacement. Customers can request on- site service from an Apple Authorized Service Provider Plus (AASP+) Apple Assurance (US only), or request a courier through the Apple Canada Technical Answerline (Canada only). They can also cho[...]

  • Página 5

    Basics Repair Strategy - 3 Large businesses, universities, and K-12 accounts must provide a purchase order on all transactions, including orders placed through the AppleOrder (US only) or ARIS (Canada only) system. USA Ordering US Service Providers not enrolled in AppleOrder may fax their orders to Service Provider Support (512-908- 8125) or mail t[...]

  • Página 6

    Basics Repair Strategy - 4 Canadian Ordering Canadian Service Providers not enrolled in ARIS may fax their orders to Service Provider Support in Canada (1-800-903-5284). For Canadian inquiries, please call Service Provider Support at 905-513-5782 and select option #3.[...]

  • Página 7

    Basics Warranty/AppleCare/ARIS - 5 Warranty/AppleCare/ARIS US Only The PowerBook 160, 165, and 180 are covered under the Apple One-Year Limited Warranty. The AppleCare Service Plan is also available for these products. Service Providers are reimbursed for warranty and AppleCare repairs made to these computers. For pricing information, refer to “S[...]

  • Página 8

    Basics Display Compatibility Matrix - 6 Display Compatibility Matrix Important : PowerBook 160/165/180 family includes two displays—an active matrix and an FSTN display. Each of these displays requires a compatible inverter and display cable; the inverters, display cables, and displays are not interchangeable. Before ordering one of these parts, [...]

  • Página 9

    Service Source K Specifications Po werBook 160/165/180[...]

  • Página 10

    Specifications Introduction - 1 Introduction You can also find specifications information for this product in the Spec Database, which you can access in one of three ways: — Launch it directly by double-clicking the Apple Spec Database runtime alias at the top level of the Main Service Source CD. — Select "Apple Spec Database" from th[...]

  • Página 11

    Specifications Processor - 2 Processor 160 CPU Motorola 68030 microprocessor 25 MHz 165 CPU Motorola 68030 microprocessor 33 MHz 180 CPU Motorola 68030 microprocessor 33 MHz Coprocessor (180 Only) Motorola 68882 floating-point math coprocessor 33 MHz[...]

  • Página 12

    Specifications Processor - 3 Addressing 32-bit internal registers 32-bit address bus 32-bit data bus[...]

  • Página 13

    Specifications Memory - 4 Memory RAM 4 MB pseudostatic RAM (PSRAM) installed on the daughterboard Expandable to 8 MB with 4 MB expansion card Expandable to 14 MB with third-party PSRAM expansion cards RO M 1 MB PRAM 256 bytes of parameter memory VRAM 128K of static video display memory Clock/Calendar CMOS custom chip with long-life lithium battery[...]

  • Página 14

    Specifications Disk Storage - 5 Disk Storage Floppy Drive 19 mm high, internal, 1.4 MB Apple SuperDrive Hard Drive 2.5 in. hard drives (many capacities)[...]

  • Página 15

    Specifications I/O Interfaces - 6 I/O Interfaces Floppy Drive DB-19 serial port for connecting external floppy drives SCSI HDI-30 SCSI port with 1.5 MB/sec. transfer rate Supports up to five external SCSI devices Does not provide termination power Connect SCSI device to computer with HDI-30 SCSI system cable. A pple Desktop Bus Apple Desktop Bus (A[...]

  • Página 16

    Specifications I/O Interfaces - 7 Serial Two RS-422 serial ports; mini DIN-8 connectors Sound Monaural sound-in port Stereo sound-out headphone jack, which plays CD audio tracks in stereo and computer-generated sounds in mono V ideo Video-out port; 8 bit, 256 color video support Supports Macintosh monitors up to 16-in. color and VGA monitors Po wer[...]

  • Página 17

    Specifications I/O Devices - 8 I/O De vices K eyboard Built-in keyboard with standard Macintosh layout 63 keys domestic; 64 keys ISO Two-level tilt adjustment T rackball 30 mm diameter, dual button ADB interface Microphone Electret, omnidirectional Output voltage of 4 mV, peak to peak[...]

  • Página 18

    Specifications Sound and Video - 9 Sound and V ideo Sound Generator Apple sound chip provides 8-bit sound capable of driving stereo headphones or other stereo equipment through the sound jack 8-bit sound input, sampled at 11 or 22 kHz 160/165 V ideo Display 10 in. (254 mm) diagonal screen Flat-panel, film-compensated supertwist nematic (FSTN) liqui[...]

  • Página 19

    Specifications Electrical - 10 Electrical Main Battery Nickel cadmium (NiCad), 2.5 Ah Provides 2-3 hours of usage before recharging Recharge time: 3 hours 500 power cycles capacity PRAM Battery 3 V lithium Po wer Adapter 110–220 VAC line voltage 17 W, 50–60 Hz US, Japanese, United Kingdom, Australian, and European versions[...]

  • Página 20

    Specifications Physical - 11 Physical Dimensions Height: 2.25 in. (5.7 cm) Width: 11.25 in. (28.6 cm) Depth: 9.3 in. (23.6 cm) W eight 6.8 lb. (3.1 kg) with battery[...]

  • Página 21

    Specifications Environmental - 12 En vironmental Operating T emperature 50–104° F (10-40° C) Storage T emperature -13 to 140° F (-25 to 60° C) Relative Humidity 20–80% noncondensing Altitude 0–15,000 ft. (0–4722 m) Operational Altitude 0–10,000 ft. (0–3048 m)[...]

  • Página 22

    Specifications Other - 1 3 Other F ax/Data Modem Internal 2400-baud modem with fax send at 9600 baud (includes fax send software) 300/1200/2400 bps transmission rates Serial binary and asynchronous protocols Error correction and data compression: MNP 4, 5 and V.42, V.42bis[...]

  • Página 23

    Specifications Other - 1 4 Express Modem Internal 14,400-baud modem with fax send/receive at 9600 baud 300-14,400 bps data transmission rates 2400/4800/7200/9600 bps transmission rates Full duplex operation; asynchronous or framed modes Error correction: V.42 compliance (MNP 2-4) Data compression: V.42bis (4 to 1 compression) and MNP-5 (2 to 1 comp[...]

  • Página 24

    Service Source K Troubleshooting PowerBook 160/165/180[...]

  • Página 25

    Troubleshooting General/ - 1 General The Symptom Charts included in this chapter will help you diagnose specific symptoms related to your product. Because cures are listed on the charts in the order of most likely solution, try the first cure first. Verify whether or not the product continues to exhibit the symptom. If the symptom persists, try the[...]

  • Página 26

    Troubleshooting General/ - 2 If this does not reset the power manager, 1 Remove the AC adapter and the battery. 2 Let the unit sit without power hooked up for 3–5 minutes. 3 Using two paper clips, simultaneously hold down the reset and interrupt buttons for 5–10 seconds. 4 Reinstall the battery and, if necessary, reconnect the AC adapter. 5 Tur[...]

  • Página 27

    Troubleshooting Symptom Charts/ Startup - 3 Symptom Charts Startup RAM failure occurs (eight-tone error chord sequence sounds after startup chord) 1 Reseat PSRAM expansion card and check connection. 2 Replace PSRAM expansion card. 3 Replace daughterboard. 4 Replace motherboard. Hardware failure occurs (four-tone error chord sequence sounds after st[...]

  • Página 28

    Troubleshooting Symptom Charts/ Startup - 4 Startup Screen displays checkerboard pattern; no startup chime 1 Reseat RAM expansion card. 2 Replace RAM expansion card. 3 Replace daughterboard. 4 Reseat display cable.[...]

  • Página 29

    Troubleshooting Symptom Charts/ Power - 5 Power Screen is blank; computer doesn’t respond 1 Restart computer. 2 Connect power adapter and restart computer in 3-4 minutes. 3 Try known–good, charged main battery. 4 Check all interconnect board, daughterboard, and motherboard connections. 5 Reset the power manager. 6 Replace keyboard. 7 Replace in[...]

  • Página 30

    Troubleshooting Symptom Charts/ Power - 6 Power After you remove main battery, some Control Panel settings are different 1 Check cables. 2 Replace interconnect board. 3 Replace daughterboard. 4 Replace motherboard. Power adapter is plugged in, but battery DA does not indicate charger is connected 1 This is normal for fully charged battery. 2 Check [...]

  • Página 31

    Troubleshooting Symptom Charts/ Power - 7 Power Low-power warning appears 1 Recharge battery or attach power adapter. 2 Verify that peripherals are low-power. 3 Remove external devices or connect power adapter. 4 Try known-good, charged main battery. 5 Try known-good power adapter. 6 Replace motherboard. Computer runs when plugged into wall outlet [...]

  • Página 32

    Troubleshooting Symptom Charts/ Video - 8 Video Pixel is always white PowerBook 180 If there are more than five voids (pixels that are always white), or two or more voids within one inch of each other, replace display (CPRC/international repairers only) or return computer to Apple. PowerBooks 160 and 165 Replace display. Pixel is always black Power[...]

  • Página 33

    Troubleshooting Symptom Charts/ Video - 9 Video Row or partial row of pixels never comes on (white line) PowerBook 160/165 1 Check cables. 2 Replace display cable. 3 Replace display. If PowerBook has serial number below FC247xxxxxx or CK247xxxxxx, replace both display and daughterboard. (Do not replace Rev. B daughterboard.) 4 Replace interconnect [...]

  • Página 34

    Troubleshooting Symptom Charts/ Video - 1 0 Video Row or partial row of pixels is always on (black line) PowerBook 160/165 1 Check cables. 2 Replace display cable. 3 Replace display. 4 Replace interconnect board. PowerBook 180 5 Check cables. 6 Replace display cable. 7 Replace interconnect board. 8 Replace display (CPRC/international only) or retur[...]

  • Página 35

    Troubleshooting Symptom Charts/ Video - 1 1 Video Thin white line is always on at middle of screen PowerBook160/165 Thin white line is normal. PowerBook 180 Replace display (CPRC/international repairers only) or return computer to Apple.[...]

  • Página 36

    Troubleshooting Symptom Charts/ Video - 1 2 Video Display is very light or totally white 1 Adjust screen contrast. 2 Check display cable, inverter board, interconnect board, daughterboard, and motherboard connections. 3 Replace inverter board. 4 Replace interconnect board. 5 Replace display cable. 6 PowerBook 160/165: Replace display. 7 Replace dau[...]

  • Página 37

    Troubleshooting Symptom Charts/ Video - 1 3 Video Rainbow colors visible from extreme viewing angles PowerBook 160/165 Such colors are normal for FSTN screens. Screen brightness is not uniform PowerBook 160/165 Irregularity in screen brightness is normal. Adjust contrast and brightness to diminish effect. PowerBook 180: Replace display (CPRC/intern[...]

  • Página 38

    Troubleshooting Symptom Charts/ Video - 1 4 Video Display stopped working or dimmed but is fine now PowerBook 160/165 If temperature is in the approximate range of under 5 or over 40 degrees centigrade, this reaction is normal.[...]

  • Página 39

    Troubleshooting Symptom Charts/ Video - 1 5 Video Backlight doesn’t operate 1 Verify that cables are not pinched or severed. 2 Check display cable, inverter board, interconnect board, daughterboard, and motherboard connections. 3 Replace inverter board. 4 Replace inverter display cable. 5 Replace interconnect board. 6 Replace display cable. 7 Pow[...]

  • Página 40

    Troubleshooting Symptom Charts/ Video - 1 6 Video Screen goes blank 1 Press any key to wake computer from system sleep. 2 Check display cable connection. 3 Reseat daughterboard. 4 Replace daughterboard.[...]

  • Página 41

    Troubleshooting Symptom Charts/ Video - 1 7 Video No display, but computer appears to operate correctly 1 Adjust screen contrast. 2 Check display cable, inverter board, interconnect board, daughterboard, and motherboard connections. 3 Connect power adapter. 4 Replace inverter board. 5 Replace interconnect board. 6 Replace display cable. 7 PowerBook[...]

  • Página 42

    Troubleshooting Symptom Charts/ Video - 1 8 Video Audio and video present, but internal floppy drive does not operate 1 Try known-good floppy disk. 2 Check floppy drive cable connection. 3 Replace floppy drive cable. 4 Replace floppy drive. 5 Replace daughterboard. 6 Replace motherboard.[...]

  • Página 43

    Troubleshooting Symptom Charts/ Hard Drive - 19 Hard Drive Internal hard drive does not operate 1 Disconnect external SCSI devices. 2 Check internal hard drive cable connection. 3 Use HD SC Setup to reinitialize drive. 4 Replace internal hard drive cable. 5 Replace internal hard drive. 6 Replace motherboard.[...]

  • Página 44

    Troubleshooting Symptom Charts/ Floppy Drive - 20 Floppy Drive Audio and video present, but internal floppy drive does not operate 1 Try known-good floppy disk. 2 Check floppy drive cable connection. 3 Replace floppy drive cable. 4 Replace floppy drive. 5 Replace daughterboard. 6 Replace motherboard. Disk ejects while booting; display shows Mac ico[...]

  • Página 45

    Troubleshooting Symptom Charts/ Floppy Drive - 21 Floppy Drive Disk does not eject 1 Switch off system and hold mouse button down while you switch system on. 2 Insert opened paper clip into hole beside drive. 3 Check floppy drive cable connection. 4 Replace floppy drive cable. 5 Replace floppy drive. 6 Replace daughterboard. 7 Replace motherboard. [...]

  • Página 46

    Troubleshooting Symptom Charts/ Floppy Drive - 22 Floppy Drive Read/write/copy error 1 Try known-good floppy disk. 2 Install inverter shield if absent. 3 Check floppy drive cable connection. 4 Replace floppy drive cable. 5 Replace floppy drive.[...]

  • Página 47

    Troubleshooting Symptom Charts/ Peripherals - 23 Peripherals After you connect external SCSI device, computer does not boot 1 Switch on external SCSI device before starting computer. 2 Check cable connections. 3 Verify that standard Apple terminator terminates SCSI chain at beginning and end. 4 Verify that SCSI select switch setting on external dev[...]

  • Página 48

    Troubleshooting Symptom Charts/ Peripherals - 24 Peripherals 1 Replace interconnect board. 2 Replace daughterboard. 3 Replace motherboard. Cursor intermittently does not move or moves erratically 1 Restart computer. 2 Clean ball and rollers of trackball. 3 Check cables. 4 Replace trackball. 5 Replace keyboard. 6 Replace interconnect board. 7 Replac[...]

  • Página 49

    Troubleshooting Symptom Charts/ Peripherals - 25 Peripherals Cursor moves, but clicking trackball button has no effect 1 Restart computer. 2 Check interconnect board, daughterboard, and motherboard connections. 3 Replace trackball. 4 Replace keyboard. 5 Replace interconnect board. 6 Replace daughterboard. 7 Replace motherboard. Cursor does not move[...]

  • Página 50

    Troubleshooting Symptom Charts/ Peripherals - 26 Peripherals No response to any key on keyboard 1 Reset power manager. 2 Check connections of keyboard to interconnect board, and interconnect board to daughterboard. 3 Replace keyboard. 4 Replace interconnect board. 5 Replace daughterboard. Known-good direct- connect printer does not print 1 Verify t[...]

  • Página 51

    Troubleshooting Symptom Charts/ Peripherals - 2 7 Peripherals Known-good network printer does not print 1 Verify that System is 7.1 or later. 2 Verify that Chooser and Control Panel settings are correct. 3 Check cables. 4 Replace printer interface cable. 5 Try known-good printer. If printer works, troubleshoot network. Refer to Networks manual. 6 R[...]

  • Página 52

    Troubleshooting Symptom Charts/ Peripherals - 2 8 Peripherals I/O devices are unrecognized or garbage is transmitted or received 1 Verify that System is 7.1 or later. 2 Check cables. 3 Verify that SCSI device has standard Apple terminator. 4 Verify that SCSI select switch setting on external device is unique. 5 Test device with known-good computer.[...]

  • Página 53

    Troubleshooting Symptom Charts/ Internal Modem - 2 9 Internal Modem Internal modem options do not appear in CDEV 1 Remove and reseat modem card. 2 Verify that System is 7.1 or later. 3 Replace modem card. 4 Replace motherboard. Modem does not respond properly to AT command set instructions 1 Verify that baud rate and data format settings of communi[...]

  • Página 54

    Troubleshooting Symptom Charts/ Internal Modem - 3 0 Internal Modem Strange mix of characters appears on screen 1 Verify that baud rate and data format settings of communications application are compatible with internal modem and remote modem. 2 Check phone cord connection and operation. 3 Remove and reseat modem card. 4 Verify that System is 7.1 o[...]

  • Página 55

    Troubleshooting Symptom Charts/ Internal Modem - 3 1 Internal Modem Modem does not respond to incoming call 1 If computer is in sleep mode, verify that Wake On Ring option in CDEV is selected. 2 Check phone cord connection and operation. 3 Replace modem card. 4 Replace motherboard. Modem has no sound output 1 Verify that Control Panel volume settin[...]

  • Página 56

    Troubleshooting Symptom Charts/ Miscellaneous - 32 Miscellaneous Screen goes blank and computer shuts down every few minutes Adjust sleep delays in Control Panel or connect power adapter. Application seems to run slower after few seconds 1 Disable System Rest. (See owner’s manual.) 2 Connect power adapter. Hard drive is slow to respond, or screen[...]

  • Página 57

    Troubleshooting Symptom Charts/ Miscellaneous - 33 Miscellaneous No sound from speaker 1 Verify that volume setting in Control Panel is above 0. 2 Verify that no external speaker is plugged in. 3 Check connections of speaker to interconnect board, interconnect board to daughterboard, and daughterboard to motherboard. 4 Replace interconnect board. 5[...]

  • Página 58

    Troubleshooting Startup Problems Flowchart/ Miscellaneous - 3 4 Startup Problems Flowchart START Reset the power manager. Press the power button to begin the startup sequence. Do the startup tones sound? No Yes Is the startup tone normal? Yes Does any video appear? No Yes See Startup Problems in the Symptom/Cure Chart. No 1. Check the cables. 2. Re[...]

  • Página 59

    Troubleshooting Startup Problems Flowchart/ Startup Problems Flowchart Startup Problems Flowchart (continued) 1. Replace the daughterboard. 2. Replace the motherboard. END Does the desktop appear? No Yes No Yes No Do the trackball and keyboard function? 1. Reset the power manager. 2. Check the cables. 3. Replace the trackball (or track- pad). 4. Re[...]

  • Página 60

    Service Source K T ake Apart Po werBook 160/165/180[...]

  • Página 61

    Take Apart Main Battery - 1 Main Battery Before you begin, disconnect the power adapter. Note: This procedure also covers removal of the main battery door. Important: Before removing the main battery, use the Macintosh Shut Down command. Otherwise, all RAM contents will be lost. Main Battery[...]

  • Página 62

    Take Apart Main Battery - 2 ± W arning: The main battery contains toxic materials. Review battery-handling and disposal instructions in Bulletins/Safety. 1 Slide open the battery door. 2 Using the battery door as a handle, pull out the main battery.[...]

  • Página 63

    Take Apart Main Battery - 3 3 Slide the battery door completely open. 4 Pull the end tab until it releases and remove the door from the battery. End Tab[...]

  • Página 64

    Take Apart I/O Door - 4 I/O Door No preliminary steps are required before you begin this procedure. Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. I/O Door[...]

  • Página 65

    Take Apart I/O Door - 5 1 Open the I/O door. 2 Carefully bend the door so that the middle bows downward and unhinge the two bottom door pegs. Right Door Peg[...]

  • Página 66

    Take Apart Top Case - 6 Top Case Before you begin, remove the following: • Main battery • I/O door Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Top Case[...]

  • Página 67

    Take Apart Top Case - 7 Note: Use a T-8 torx driver to remove the small screw from the rear connector panel and a T-10 torx driver to remove the other case screws. 1 Remove the five torx screws from the bottom case.[...]

  • Página 68

    Take Apart Top Case - 8 2 Lift the back of the top case and disconnect the interconnect cable. 3 Lift off the top case and unhook the two tab fasteners from the front of the bottom case. Replacement Caution: When connecting the display cable connector, fold the cable as shown. If it is not folded correctly, the cable could short. Interconnect Cable[...]

  • Página 69

    Take Apart Trackball Assembly - 9 Trackball Assembly Before you begin, remove the following: • Main battery • I/O door • Top case Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Trackball Assembly[...]

  • Página 70

    Take Apart Trackball Assembly - 1 0 Caution: The trackball ribbon cable is fragile and should be handled with care. 1 Pull out the locking tab on the trackball connector and remove the trackball ribbon cable. Trackball Ribbon Cable Locking Tab[...]

  • Página 71

    Take Apart Trackball Assembly - 1 1 2 Using a T-8 torx driver, remove the two mounting screws and lift the trackball assembly from the top case.[...]

  • Página 72

    Take Apart Keyboard - 1 2 Keyboard Before you begin, remove the following: • Main battery • I/O door • Top case • Trackball assembly Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Keyboard[...]

  • Página 73

    Take Apart Keyboard - 1 3 Caution: The keyboard ribbon cables are fragile and should be handled with care. 1 Lift the locking tabs on the two keyboard connectors and remove the keyboard ribbon cables. Keyboard Ribbon Cables[...]

  • Página 74

    Take Apart Keyboard - 1 4 2 Using a T-8 torx driver, remove the seven mounting screws and lift the keyboard from the top case.[...]

  • Página 75

    Take Apart Inverter Board - 15 Inverter Board Before you begin, remove the following: • Main battery • I/O door • Top case Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Inverter Board[...]

  • Página 76

    Take Apart Inverter Board - 16 Important: The PowerBook 160/165 and PowerBook 180 displays require different inverter boards. Refer to the Service Source parts database for the correct part number for each board.[...]

  • Página 77

    Take Apart Inverter Board - 17 1 Remove the two mounting screws. Note: Do not remove the inverter shield from the inverter board. 2 Pull the inverter board and attached shield straight up and off the connector on the interconnect board. 3 Disconnect the inverter cable. Inverter Cable Inverter Board Inverter Shield[...]

  • Página 78

    Take Apart Inverter Board - 18 Replacement Note: Be sure to align the brightness and contrast pots on the inverter board with the plastic actuators on the top case. It is easiest to align the pots and actuators if you set both to their extreme outer positions. Actuator Actuator Inverter Board Contrast Pot Brightness Pot[...]

  • Página 79

    Take Apart Inverter Board - 19 Replacement Note: If you are replacing the inverter board, order both the inverter board and the inverter shield. Install the new shield on the board before replacing it. Do not reuse the original inverter shield. Inverter Shield Inverter Board[...]

  • Página 80

    Take Apart Interconnect Board - 2 0 Interconnect Board Before you begin, remove the following: • Main battery • I/O door • Top case • Inverter board Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Interconnect Board[...]

  • Página 81

    Take Apart Interconnect Board - 2 1 ± W arning: The interconnect board contains hazardous materials. Return bad interconnect boards to Apple for proper disposal. Caution: The keyboard and display cables are fragile and should be handled with care. 1 Lift the locking tabs on connectors J5 and J3 and remove the keyboard ribbon cables. J5 Connector J[...]

  • Página 82

    Take Apart Interconnect Board - 2 2 Note: The display cable will not come entirely out of the connector until you remove the interconnect board from the top case. 2 Pull out the locking tab on connector J2 and ease the display cable out of the connector as far as the cable will go. Replacement Note: Connect the display cable before replacing the in[...]

  • Página 83

    Take Apart Interconnect Board - 2 3 3 Using a T-8 torx driver, remove the two mounting screws and lift the interconnect board from the top case.[...]

  • Página 84

    Take Apart Actuators - 2 4 Actuators Before you begin, remove the following: • Main battery • I/O door • Top case • Inverter board Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Actuators[...]

  • Página 85

    Take Apart Actuators - 2 5 1 Pull up the contrast actuator, rotate it toward the display, and remove the actuator from the top case. 2 Repeat for the brightness actuator.[...]

  • Página 86

    Take Apart Elevation Feet - 2 6 Elevation Feet Before you begin, remove the following: • Main battery • I/O door • Top case Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Elevation Foot Elevation Foot[...]

  • Página 87

    Take Apart Elevation Feet - 2 7 1 Using a T-8 torx driver, remove the torx screw, washer, and spring clip from the inside of the elevation foot. 2 Pull off the elevation foot. Elevation Foot Spring Clip[...]

  • Página 88

    Take Apart Daughterboard - 2 8 Daughterboard Before you begin, remove the following: • Main battery • I/O door • Top case • PSRAM expansion card (if present) Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Daughterboard[...]

  • Página 89

    Take Apart Daughterboard - 2 9 1 Using a T-8 torx driver, remove the four daughterboard mounting screws. Caution: Always use the logic board take-apart tool to separate the daughterboard connector from the motherboard connector. Trying to disconnect the daughterboard from the motherboard by rocking or peeling the boards apart damages the connectors[...]

  • Página 90

    Take Apart Daughterboard - 3 0 2 Using the Apple logic board take-apart tool, disconnect the daughterboard from the motherboard. Replacement Note: If you are replacing a defective daughterboard, be aware that the PowerBook 160/ 165/180 daughterboards are very similar. To differentiate daughterboards, check the underside of the board. PowerBook 180 [...]

  • Página 91

    Take Apart Daughterboard - 3 1 U27; PowerBook 160/165 boards do not. To further differentiate PowerBook 160 and 165 daughterboards, check the underside for the following resistors: • PowerBook 160 daughterboard R38 resistor: installed R39 resistor: not installed • PowerBook 165 daughterboard R38 resistor: not installed[...]

  • Página 92

    Take Apart Daughterboard - 3 2 R39 resistor: installed For daughterboard part numbers, refer to the Service Source parts database. Replacement Note: The green heat sinks attached to the daughterboard are made of delicate heat-conducting material. If they are missing or damaged, they must be replaced. Replacement Note: To replace a damaged heat sink[...]

  • Página 93

    Take Apart Daughterboard - 3 3 appropriately sized heat sink from the heat sink kit (part number 076-0069), and gently press the part into place. Replacement Caution: Make sure the heat sink is placed exactly as shown in the illustration. The heat sink should not hang over the side of the component it is covering, or it may short the component lead[...]

  • Página 94

    Take Apart Daughterboard - 3 4 Replacement Note: If you are replacing a defective daughterboard in a PowerBook 160/180 within the serial number range FC233xxxxxx through FC241xxxxxx, you must also replace the sound jack insulator on the motherboard. Sound Jack Insulator Sound Jack Assembly Motherboard[...]

  • Página 95

    Take Apart Daughterboard - 3 5 Replacement Note: To replace the sound jack insulator, carefully peel off the original insulator. Remove the paper backing on the revised insulator (part number 922-0591), and gently press it into place. Replacement Caution: Make sure the new insulator sits in exactly the same position as the original insulator.[...]

  • Página 96

    Take Apart Motherboard - 3 6 Motherboard Before you begin, remove the following: • Main battery • I/O door • Top case • PSRAM expansion card (if present) • Daughterboard • Modem card (if present) Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safe[...]

  • Página 97

    Take Apart Motherboard - 3 7 Caution: The hard drive, floppy drive, and thermistor cables are fragile and should be handled with care. 1 Lift the locking tabs and remove the floppy drive and thermistor cables. 2 Remove the hard drive cable. Hard Drive Cable Floppy Drive Cable Thermistor Cable Locking Tab Locking Tab[...]

  • Página 98

    Take Apart Motherboard - 3 8 3 Remove the two hex- head screws and lift the motherboard from the bottom case. Hex-Head Screw Motherboard[...]

  • Página 99

    Take Apart Hard Drive - 39 Hard Drive Before you begin, remove the following: • Main battery • I/O door • Top case • Modem card (if present) • Daughterboard Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Hard Drive[...]

  • Página 100

    Take Apart Hard Drive - 40 Caution: The hard drive cable is fragile and should be handled with care. 1 Disconnect the hard drive cable from the motherboard. Hard Drive Cable[...]

  • Página 101

    Take Apart Hard Drive - 41 2 Using a T-8 torx driver, remove the five screws from the drive retainer. 3 Using a jeweler’s screwdriver, release the drive retainer latch and remove the retainer. Retainer Latch Drive Retainer[...]

  • Página 102

    Take Apart Hard Drive - 42 4 Lift the hard drive from the case. 5 Pull the release loop and disconnect the hard drive cable. Note: If the cable does not have a release loop, gently pry the cable from the drive with a screwdriver. Release Loop[...]

  • Página 103

    Take Apart Hard Drive - 43 Replacement Note: Drive retainers for 17-mm-high and 19-mm-high hard drives are not interchangeable. Check the height of the replacement drive and use the appropriate drive retainer. If you are upgrading from a 40 MB to 80 MB hard drive, use the ridged, 17-mm retainer that shipped with the 80 MB hard drive.[...]

  • Página 104

    Take Apart Hard Drive - 44 Replacement Note: For information on returning drives, cables, and carriers to Apple, refer to Additional Procedures in the Hard Drives chapter.[...]

  • Página 105

    Take Apart Floppy Drive - 45 Floppy Drive Before you begin, remove the following: • Main battery • I/O door • Top case • Modem card (if present) • Daughterboard Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Floppy Drive[...]

  • Página 106

    Take Apart Floppy Drive - 46 Note: Follow this procedure if a rectangular green heat sink extends over the floppy drive. 1 Remove the screw holding the heat sink over the floppy drive and lift off the heat sink. 2 Remove the mylar insulator attached to the drive retainer. Mylar Insulator Heat Sink[...]

  • Página 107

    Take Apart Floppy Drive - 47 Caution: The floppy drive cable is fragile and should be handled with care. 3 Lift the locking tab and disconnect the floppy drive cable from the motherboard. Floppy Drive Cable Locking Tab[...]

  • Página 108

    Take Apart Floppy Drive - 48 4 Using a T-8 torx driver, remove the five torx screws from the drive retainer. 5 Using a jeweler’s screwdriver, release the drive retainer latch and remove the retainer. Retainer Latch Drive Retainer[...]

  • Página 109

    Take Apart Floppy Drive - 49 6 Slide the floppy drive back and lift it from the bottom case. 7 Using a jeweler’s screwdriver, push out the locking tab and remove the floppy drive cable from the drive. Replacement Caution: When connecting the floppy drive cable connector, fold the cable as shown. If it is not folded correctly, the cable could shor[...]

  • Página 110

    Take Apart Display Bezel - 5 0 Display Bezel Before you begin, remove the main battery. Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Display Bezel[...]

  • Página 111

    Take Apart Display Bezel - 5 1 1 Remove the two plastic plugs. 2 Using a T-8 torx driver, remove the two bezel mounting screws from the display. Screw Plastic Plugs Plastic Plug[...]

  • Página 112

    Take Apart Display Bezel - 5 2 3 Pull the display bezel down and away from the display and release the bezel from the mounting tabs at the top and sides of the display. 4 Lift the bezel off the display. Display Display Bezel[...]

  • Página 113

    Take Apart Clutches/Display Housing - 5 3 Clutches/Display Housing Before you begin, remove the following: • Main battery • Display bezel Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Right Clutch Left Clutch Display Housing[...]

  • Página 114

    Take Apart Clutches/Display Housing - 5 4 Note: This topic includes take apart procedures for the left and right clutch assemblies and the display housing. 1 Cover the keyboard with a clean cloth or sheet of paper. 2 Using a T-8 torx driver, remove the four display mounting screws. 3 Remove the display from the housing and EMI shield. 4 Place the d[...]

  • Página 115

    Take Apart Clutches/Display Housing - 5 5 5 Pull off the three clutch covers. 6 Using a T-8 torx driver, remove the six mounting screws from the left and right clutches. 7 Remove the left and right clutches from the display housing. Inverter Cable Right Clutch Clutch Covers[...]

  • Página 116

    Take Apart Clutches/Display Housing - 5 6 Replacement Note: Replace the short mounting screws in the top-inside clutch threadings. The top-outside threadings are used to mount the bezel. Replacement Note: To avoid pinching the inverter cable, route the cable behind the top-right corner of the hinge on the right clutch.[...]

  • Página 117

    Take Apart Clutches/Display Housing - 5 7 8 Remove the display housing and EMI shield from the case. Display Housing EMI Shield[...]

  • Página 118

    Take Apart Inverter Cable - 58 Inverter Cable Before you begin, remove the following: • Main battery • I/O door • Top case • Inverter board • Display bezel Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Inverter Cable[...]

  • Página 119

    Take Apart Inverter Cable - 59 1 Pull off the center and right clutch covers. 2 Using a T-8 torx driver, remove the three mounting screws from the right clutch. 3 Remove the clutch from the display housing. Replacement Note: Replace the short mounting screw in the top-inside clutch threading. The top-outside threading is used to mount the bezel. In[...]

  • Página 120

    Take Apart Inverter Cable - 60 Replacement Note: To avoid pinching the inverter cable, route the cable behind the top-right corner of the hinge on the right clutch. 4 Disconnect the inverter cable and remove it from the case.[...]

  • Página 121

    Take Apart Display - 61 Display Before you begin, remove the following: • Main battery • Display bezel Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Display[...]

  • Página 122

    Take Apart Display - 62 Note: This topic includes separate procedures for removing the PowerBook 160/165 FSTN display and the PowerBook 180 active- matrix display. Note: The PowerBook 180 active matrix display module is available to CPRC and international repairers only.[...]

  • Página 123

    Take Apart Display - 63 P owerBook 160/165 FSTN Display Caution: The display cable is fragile and should be handled with care. 1 Cover the keyboard with a clean cloth or sheet of paper. 2 Using a T-8 torx driver, remove the four display mounting screws. 3 Remove the display from the housing and EMI shield. Display EMI Shield Display Housing[...]

  • Página 124

    Take Apart Display - 64 4 Place the display face- down on the keyboard. 5 Lift the locking tab on the display connector and disconnect the display cable. Locking Tab Adhesive Adhesive[...]

  • Página 125

    Take Apart Display - 65 6 Caution: The PowerBook 160/165 display cable is attached to the display with adhesive near the connector and backlight ends of the cable. Carefully pry the cable off the display at these two points. Gently detach the display cable from the back of the display.[...]

  • Página 126

    Take Apart Display - 66 7 Disconnect the inverter cable from the display backlight cable. 8 Remove the display. Replacement Note: To avoid pinching the inverter cable, route the cable behind the top-right corner of the hinge on the right clutch. Inverter Cable Right Clutch Inverter Cable Backlight Cable[...]

  • Página 127

    Take Apart Display - 67 P owerBook 180 Activ e- Matrix Display Caution: The display cable is fragile and should be handled with care. 1 Lift the locking tab on the display connector and disconnect the display cable. 2 Disconnect the inverter cable. Locking Tab Display Cable Inverter Cable Display Cable[...]

  • Página 128

    Take Apart Display - 68 3 Using a T-8 torx driver, remove the four display mounting screws. 4 Remove the display from the housing and EMI shield. Display EMI Shield Housing[...]

  • Página 129

    Take Apart Display - 69 Replacement Note: To avoid pinching the inverter cable, route the cable behind the top-right corner of the hinge on the right clutch. Inverter Cable Right Clutch[...]

  • Página 130

    Take Apart P B 160/165 Display Cable - 70 PB 160/165 Display Cable Before you begin, remove the following: • Main battery • I/O door • Top case • Inverter board • Interconnect board • Display bezel • PowerBook 160/165 • Display PowerBook 160/165 Display Cable[...]

  • Página 131

    Take Apart P B 160/165 Display Cable - 71 Caution: The PowerBook 160/165 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Caution: The display cable is fragile and should be handled with care. 1 Pry the display cable ferrite bead from the case. Ferrite Bead[...]

  • Página 132

    Take Apart P B 160/165 Display Cable - 72 2 Pull off the center and left clutch covers. 3 Using a T-8 torx driver, remove the three mounting screws from the left clutch. 4 Remove the clutch from the display housing. Replacement Note: Replace the short mounting screw in the top-inside clutch threading. The top-outside threading is used to mount the [...]

  • Página 133

    Take Apart P B 160/165 Display Cable - 73 5 Remove the display cable from the case. Display Cable[...]

  • Página 134

    Take Apart PowerBook 180 Display Cable - 74 PowerBook 180 Display Cable Before you begin, remove the following: • Main battery • I/O door • Top case • Inverter board • Interconnect board • Display bezel Di l C bl PowerBook 180 Display Cable[...]

  • Página 135

    Take Apart PowerBook 180 Display Cable - 75 Caution: The PowerBook 180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/ Safety. Caution: The display cable is fragile and should be handled with care. 1 Pry the display cable ferrite bead from the case. Ferrite Bead[...]

  • Página 136

    Take Apart PowerBook 180 Display Cable - 76 2 Pull off the center and left clutch covers. 3 Using a T-8 torx driver, remove the three mounting screws from the left clutch. 4 Remove the clutch from the display housing. Replacement Note: Replace the short mounting screw in the top-inside clutch threading. The top-outside threading is used to mount th[...]

  • Página 137

    Take Apart PowerBook 180 Display Cable - 77 5 Lift the locking tab on the display connector and disconnect the display cable. 6 Remove the display cable from the case. Locking Tab Display Cable[...]

  • Página 138

    Service Source K Upgrades Po werBook 160/165/180[...]

  • Página 139

    Upgrades Modem Card - 1 Modem Card Before you begin, remove the following: • Main battery • I/O door • Top case Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Modem Card[...]

  • Página 140

    Upgrades Modem Card - 2 Caution: If you install a third-party modem card, make sure that it does not cover any of the heat sinks on the daughterboard or over the floppy drive. Note: The modem card is an option for the PowerBook 160/165/180. 1 Pinch the release tabs and push out the modem port cover. Modem Port Cover Release Tabs[...]

  • Página 141

    Upgrades Modem Card - 3 2 Connect the modem card connector to motherboard connector J8. 3 Install the two mounting screws. Modem Modem Card Connector J8 Connector[...]

  • Página 142

    Upgrades Modem Card - 4 4 Affix the FCC modem label to the inside of the I/O door. Align the label with the modem port. 5 Affix the DOC label to the inside of the I/O door. Align the label with the HD-30 SCSI port. Modem Port HD-30 SCSI Port FCC Modem Label DOC Label[...]

  • Página 143

    Upgrades PSRAM Expansion Card - 5 PSRAM Expansion Card Before you begin, remove the following: • Main battery • I/O door • Top case Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. PSRAM Expansion Card[...]

  • Página 144

    Upgrades PSRAM Expansion Card - 6 Caution: Handle the PSRAM card by the edges only. Do not touch any components on the card. Caution: If you install a third-party expansion card, do not remove or cover up any of the heat sinks on the daughterboard. Operating the computer without the heat sinks significantly increases the chance of daughterboard fai[...]

  • Página 145

    Upgrades PSRAM Expansion Card - 7 Caution: An incorrectly installed PSRAM card could damage the daugherboard. Note that the expansion connector and the PSRAM card are keyed for proper installation. Do not force the card into the connector, thereby defeating the key. Caution: When installing the card, press down on the edge directly above the connec[...]

  • Página 146

    Upgrades PSRAM Expansion Card - 8 1 Connect the PSRAM expansion card to the expansion connector on the daughterboard. PSRAM Expansion Card Expansion Connector PSRAM Expansion Card Expansion Connector[...]

  • Página 147

    Upgrades PSRAM Expansion Card - 9 Note: To verify that the upgrade is successful, check the Total Memory message (for systems with virtual memory switched off) or the Built-in Memory message (for systems with virtual memory switched on). The memory size should be 4 MB of soldered RAM plus the RAM on the expansion card. If the memory size is incorre[...]

  • Página 148

    Service Source K Exploded V ie w Po werBook 160/165/180[...]

  • Página 149

    Exploded View 1 Rubber Plug 875-0112 Inverter Cable 936-0106 Display Bezel  922-0026 (PB 160), 922-1108 (PB 165), 922-0030 (PB 180) Display 661-0745 (PB 160/165),661-0748 (PB 180) Display Housing 922-0044  Product family configurations may vary. For parts with asterisk (*), refer to parts list. Drive Retainer 922-0009 (17 mm[...]