AEG L 52840 manual

LAVAMAT 52840 User manual Washing Machine[...]

Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all process es perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass i[...]

OPERATING INSTRUCTIONS SAFETY INFORMATIO N Read carefully & keep for future reference. • The safety of Your appliance complies with the industry standards and with legal re - quirements on the safety of appliances. Howeve r, as manufacturers, we feel it is our duty to provide the following safety notes. • It is most important that this inst[...]

• All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual. • After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable agai[...]

• Make sure that children or pets do not climb inside the drum. To prevent children or pets becoming trapped inside the drum the ma - chine incorporates a special feature. To acti - vate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device an[...]

Detergent dispenser drawer Compartment for prewash phase or stain re - mover. The prewash detergent is added at the beginning of the wash programme. The stain remover is added during the STA IN-Ac - tion phas e in the main wash. Compartment for powder or liquid detergent used for main wash . Compartment for liquid additives (fabric soft - ener, sta[...]

Indicator pilot lights (7) After having pressed the button 5 , the WASHI NG pilot light ( 7.1 ) comes on. When the pilot light 7.1 comes on this means that the machine is operating. When the programme has finished, the END pilot light ( 7.2 ) comes on. When the appliance is performing additional rin - ses the EXTRA RINSE pilot light ( 7.3 ) come s [...]

1. Pull out the dispenser drawer until it stops. Measure out the amount of de - tergent required, pour it into the main wash compartment and, if you wish to carry out the prewash phase or to perform the stain function, pour the detergent or the stain remover into the compa rtme nt mark ed . 2. If required, pour fabric softener into the compa rtme n[...]

Press the button 2 repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up. RINSE HOLD : by selecting this option the water of the last ri nse is not emptied out to pre - vent the fabrics from creasing. When the programme has finishe[...]

You must select this option after you have set the programme and before you press the butto n 5 . You can cancel the delay time at any moment, before you press the button 5 . If the button 5 has already been pressed: • set the washing machine to PAUSE by pressing the button 5 ; • press the button 6 once, the light relevant to the selected delay[...]

After closing the door, it is necessary to select the programme and options again and to press button 5 . At the end of the programme The machine stops automatically. The pilot light of button 5 and pilot light 7.1 go off. The phase light 7.2 goes on. If a programme or an option that ends with water still in the tub has been selected, the relative [...]

Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Lau ndry Options Detergent Compartmen t SYNTHETICS 60°- 30° Main wash - Rinses - Short spin Maximum spin speed at 1200 rpm Max. load 3 kg - Red. load 1,5 kg Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shir[...]

Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Lau ndry Options Detergent Compartmen t DRAIN Draining of water Max. load 6 kg For emptyi ng out the wate r of the la st rinse in pr o - grammes with the Rinse Hold option selected. SPIN Drain and long spin Maximum spin speed at 120[...]

HELPFUL HINTS AND TIPS Sorting out the laundry Follow the wash code symbols on each g arment label and the manufacturer’s washing in - structions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, wooll ens. Before loading the laundry Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash. N[...]

The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and degree of soiling. All commonly available washing machine detergents may be us ed in this appliance: • powder detergents for all types of fabric • powder detergents for delicate fabrics (60°C max) and woollens •[...]

Maintenance wash With the use of low temperature washes it is possible to get a buil d up of residues inside the drum. We recommend that a maintenance wash be performed on a regular basis. To run a maintenance wash: • The drum should be empty of laundry. • Select the hottest cotton wash programme. • Use a normal measure of detergent, must be [...]

Programme: Short Cotton Programme at maxi mum temperature and add approx. 1/4 measuring cup of detergent. Door seal Check from time to time the door seal and objects that could be trapped in the fold . Drain pump The pump should be inspected regularly and particularly if: • the appliance does not empty and/or spin; • the appliance makes an unus[...]

7. When no more water comes out, un - screw the pump cover by turning it an - ti-clockwise and remove the filter. Use pliers, if necessary. Always keep a rag nearby to dry up any water spillages when removing the cover. Clean the filter under a tap, to remove any traces of fluff. 8. Remove foreign bodies and fluff from the filter seat and from the [...]

Cleaning the w ater inlet filters If the appliance doesn't fill, it takes a long time to fill with water, the starting button blinks yellow or the display (if available) shows the relevant alarm (see chapter "What to do if... " for more details), check if the water inlet filters are blocked . To clean the water inlet filters: 1. Turn[...]

Emergency emptying out If the water is not discharged, proceed as follows to empty out the machine: 1. pull out the plug from the power socket; 2. close the water tap; 3. if necessary, wait until the water has cooled down; 4. open the pump door; 5. place a bowl on the floor and place the end of the emergency emptying hose into the bowl. Remove its [...]

• 2 flashes = «The machine does not empty and/or does not spin» , follow the corre - sponding suggestions in «Possible cause/Solutions» box and restart the programme. Once the problem has been eliminated, press the button 5 to restart the programme. If af - ter all checks, the problem persists, contact your lo cal Service Centre. Problem Poss[...]

Problem Possible cause/Solution The machine does not empty and/or does not spin: The drain hose is squashed or kinked. (Yellow pilot light of button 5 blinks) • Check the drain hose connection. The drain filter is clogged. (Yel low pilot lig ht of button 5 blinks) • Clean the drain filter. An option or a programme that ends with the water still[...]

Problem Possible cause/Solution The door will not open: The programme is still running. • Wait the end of washing cycle. The door lock has not bee n released. • Wait a fe w minutes. There is wate r in the drum. • Select drain or spin programme to empty out the water. The machine vibrates is no isy: The transit bolts an d packing have not been[...]

Electrical connection Voltage - Overall power - Fuse Information on the electrical connection is given on the rating plate, on the inner edge of the appliance door. Water supply pressure Minimum Maximum 0,05 MPa 0,8 MPa Maximum Load Cotton 6 kg Spin Speed Maximum 1200 rpm CONSUMPTION VALUES Programme Energy consumption (KWh) 1) Water consump - tion[...]

1. After removing all the packaging, care - fully lay machine on it’s back to remove the polystyrene base from the bottom. 2. Remove the power supply cable and the draining and inlet hose from the hose holders on the rear of the appliance. 3. Unscrew the three bolts with the key supplied with the appliance. Installation 25[...]

4. 0Slide out the relevant plastic spacers. 5. Open the porthole and remove the poly - styrene block fitted on the door seal. 6. Fill the smaller upper hole and the two large ones with the corresponding plas - tic plug caps supplied in the bag con - taining the instruction booklet. 26 Installation[...]

Positioning and levelling Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Before placing it on small tiles, apply a rubb er coatin g. Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine. If it is [...]

hose, be sure to tighten the ring nut again to prevent leaks. The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose special ly designed for this type of use. Installation should comply with local water authority and buil ding regulations require - ments. A minimum[...]

from your local Service Force Centre. The joining piece must have an internal di ameter of 18 mm. If your drain hose looks like this (see be - low) you do not require the “U” piece”. Just push the hose firmly in to the standpipe. 2. Onto a sink outlet spigot. If the outlet spigot has not been used before, remove any blanking plug that may be [...]

In the interest of the environment The appliance should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being dis - charge d safel y in to a riv er. It is essential that these appliances are not con - nected to the surface water drainage system as this water is discharged directly into a[...]

ENVIRONMENT CONCERNS The symbol on the p roduct or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative co[...]

www.aeg.com/shop 192989731-A-102011[...]