2Wire 7900P manual

Epson PowerLite 7900p Projector 9/04 Epson PowerLite 7900p Projecto r - 1 Projector Specifications General Type of disp lay Poly-silicon Th in Film T ransisto r (TFT), Active Matrix Lens F=1.7 to 2.3, f=28 to 37 mm Zoom ratio 1:1.35 Resolution 1024 × 768 pixels (native format) Color reproduction 24 bi t, 16.7 million colors Brightness 4000 ANSI lu[...]

Epson PowerLite 7900p Projector 2 - Epson PowerLite 79 00p Proje ct or 9/04 Environmental Temperature Operating: 41 to 104 °F (5 to 40 °C) Storage: 14 to 140 °F (–10 to 60 °C) Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 9 0% RH, non-condensing Safety United States FCC 47CFR Part 15B Class B (DoC) UL60950 Third Edition Cana[...]

Epson PowerLite 7900p Projector 9/04 Epson PowerLite 7900p Projecto r - 3 * The image is resized using Epson’s SizeWise Technology. Positioning the Projector Follow these guideline when deciding where to place the projector: ❏ Place the projector on a sturdy, level surface. ❏ Make sure there is plenty of space for ventilation around and under[...]

Epson PowerLite 7900p Projector 4 - Epson PowerLite 79 00p Proje ct or 9/04 Long Throw Zoom Lens (V12H004L05) To determine the diagonal size of an image (in inches) when you know the projection distance: ❏ Maximum diagonal size = (((2.54 × projection distance) / 100) × 20.4 ) + 1.93 ❏ Minimum diagonal siz e = (((2.54 × projection distance) /[...]

Epson PowerLite 7900p Projector 9/04 Epson PowerLite 7900p Projecto r - 5 To use an external monitor, connect it to the projector’s Monitor Out port, as shown: Follow these guidelines whe n using an external monitor: ❏ The monitor displays the currently sel ected computer source. Press the Preview button on the remote control if you want to dis[...]

Epson PowerLite 7900p Projector 6 - Epson PowerLite 79 00p Proje ct or 9/04 You see the currently selected source displayed in the main window, as shown below. All other sources (including the currently selected source) are displayed in smaller pr eview windows on the right si de and at the bottom . If no equipment is connected to a port, or if the[...]

Epson PowerLite 7900p Projector 9/04 Epson PowerLite 7900p Projecto r - 7 2. Click the Arrange icon. 3. Drag one monitor icon on top of the other. If the Arrange option isn’t avai lable, you may need to select one of the Simulscan resolution settings: 1. Click the Monitor icon. 2. Select a Simulscan resolution as shown. (Allow a few seconds for t[...]

Epson PowerLite 7900p Projector 8 - Epson PowerLite 79 00p Proje ct or 9/04 It takes about one second after projection starts for the image to be corrected. During this time, a vertical keystone correction gauge appears on the scree n. If your image is still distorted, you can correct it as follows: ❏ If the image has two parallel sides but is wi[...]

Epson PowerLite 7900p Projector 9/04 Epson PowerLite 7900p Projecto r - 9 Adjusting the Color Mode You may want to adjust the color mode to select a setting that is appropriate for the image you’re projecting and the environment in which you’re projecting it. The following table lists the available color modes. To change the color mode, press t[...]

Epson PowerLite 7900p Projector 10 - Epson PowerLite 7900p Projector 9/04 3. Press the P Power button again. The P power light flashes orange for about 30 seconds as the projector cools down. After the projector has cooled, the orange light stays on and the exhaust fan shuts off. Cautio n: To avoid damaging the projector or lamp, never unplug the p[...]

Epson PowerLite 7900p Projector 9/04 Epson PowerLite 7900p Projector - 11 Using the Remote Control as a Wireless Mouse When you use the remote control as a wireless mouse, you can control your computer or click th roug h slideshow-style presentations (such as PowerPoint ® ) from up to 20 feet away. To control your computer with the remote, make su[...]

Epson PowerLite 7900p Projector 12 - Epson PowerLite 7900p Projector 9/04 Controlling Multiple Projectors If you’re using more than one projector, you can control all the projectors—or just selected ones—by using the projector ID system with just one remo te control. To operate a projector, you have to set the remote control’s ID to match t[...]

Epson PowerLite 7900p Projector 9/04 Epson PowerLite 7900p Projector - 13 4. Hold down the Num button on the remote control and use the numeric keypad to enter a 4-digit password. The password will be displayed as **** . After you enter the last digit, a confirmation screen appears. Enter the password again. 5. After you finish setting the password[...]

Epson PowerLite 7900p Projector 14 - Epson PowerLite 7900p Projector 9/04 When you turn the proje ctor on again, you will need to enter a password. Follow the ins truc tions in the nex t sec tion. Starting the Projector with a Password Caution: If you lose the remote control, you will no t be able to enter the password, so keep the r emote control [...]

Epson PowerLite 7900p Projector 9/04 Epson PowerLite 7900p Projector - 15 Setting Up the Network Connect each projector you want to monitor to your network and configure it with an appropriate IP address. 1. Connect the projector to your network using a commercially available 1 00baseTX or 10baseT network cable. Plug the cable into the projector’[...]

Epson PowerLite 7900p Projector 16 - Epson PowerLite 7900p Projector 9/04 Registering Projectors in EMP Monitor Before you can monitor a projecto r, you have to register it. Follow these steps: 1. Open EMP Monitor. You see this screen: 2. Click Register projector . You see thi s screen: 3. Click Auto detect to locate projectors currently ope rating[...]

Epson PowerLite 7900p Projector 9/04 Epson PowerLite 7900p Projector - 17 The following tables explain th e status, video source, and error icons. Controlling Your Projectors The control buttons in the u pper-right of the EMP Monitor screen let you turn the projectors on and off and select video sources. (Hold the mouse pointer ov er a button to se[...]

Epson PowerLite 7900p Projector 18 - Epson PowerLite 7900p Projector 9/04 Using EMP NetworkManager You can use EMP NetworkManager to configure the pr ojector t o s e n d o u t m e s s a g e s by e - m a i l , notifying you when a problem occurs with the projecto r. Before running EMP NetworkManager, make sure you’ ve installed the software as des[...]

Epson PowerLite 7900p Projector 9/04 Epson PowerLite 7900p Projector - 19 4. Verify that the n etwork se ttings are cor rect. (If DH CP is on, you don’t need to verify network settings.) ❏ Make any desired changes to the projector’s netwo rk address configuration (turning off DH CP enables the manual settings). ❏ You can give the projector [...]

Epson PowerLite 7900p Projector 20 - Epson PowerLite 7900p Projector 9/04 Cleaning the Lens Clean the lens whenever yo u notice dirt or dust on the surface. ❏ Use a canister of compressed air to remove dust. ❏ To remove dirt or smears on the lens, use lens-c leaning paper. If necessary, moisten a soft cloth with lens cleaner and gently wipe the[...]

Epson PowerLite 7900p Projector 9/04 Epson PowerLite 7900p Projector - 21 Cleaning the Ai r Fi lters and Ven ts Clean the air filters and air intake vents after every 100 hours of use. If they are not cleaned periodi cally, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. Follow [...]

Epson PowerLite 7900p Projector 22 - Epson PowerLite 7900p Projector 9/04 6. To remove the lamp cover, in sert the screwdriver supplied with the spare lamp (or another flat- tipp ed screwdriver), into the space beside the air vent to gently lift the lamp cover off. 7. Loosen the two screws holdin g the lamp in place. (You don’t need to remove the[...]

Epson PowerLite 7900p Projector 9/04 Epson PowerLite 7900p Projector - 23 Optional Accessories You can purchase these accessorie s from your dealer, by calling EPSON at (800) 873-7766, or by visiting the EPSON Store at www.epsonstore.com (U.S. sa les only). In Canada, please call (800) 463-7766 for dealer referral. Related Documentation CPD-18737 E[...]