Zenoah G270RC manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Zenoah G270RC, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Zenoah G270RC one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Zenoah G270RC. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Zenoah G270RC should contain:
- informations concerning technical data of Zenoah G270RC
- name of the manufacturer and a year of construction of the Zenoah G270RC item
- rules of operation, control and maintenance of the Zenoah G270RC item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Zenoah G270RC alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Zenoah G270RC, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Zenoah service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Zenoah G270RC.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Zenoah G270RC item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    OWNER'S MANUAL Thank you for using ZENOAH ENGINE. ● Please read this Owner’s Manual thoroughly before operating and use the engine correctly according to this Owner’s Manual. (For safety reasons, please contact your sales dealer before operating this engine if there is something that you do not understand.) ● This engine has been desig[...]

  • Page 2

    2[...]

  • Page 3

    3 SPECIFICATIONS.....................................................4 SAFETY PRECAUTIONS..........................................5 FUEL .........................................................................7 ENGINE STARTING..................................................8 OPERATION ............................................................[...]

  • Page 4

    4 SPECIFICA TIONS Engine Type G240RC G270RC Overall Size (L x W x H) 166 x 205 x 196mm Weight 2.07kg Displacement 22.5cm 3 25.4cm 3 Clutch Engagement 6000rpm (STD Spring) Carburetor Type WT-813A Spark Plug NGK CMR7H Spark Plug Gap 0.65mm Rotating Direction Counter-Clockwise (View From PTO)[...]

  • Page 5

    5 SAFETY PRECAUTIONS ● These safety precautions are to prevent you and those people in the vicinity from incurring harm or damage. Make sure to observe these precautions and constantly strive to ensure safety. ● Safe use of the engine is your personal obligation and responsibility. Constantly take care to act with good judgment as you enjoy you[...]

  • Page 6

    6 SAFETY PRECAUTIONS overly long sleeves, neckties and the like. Failure to do so could result in injury. • When mounting the engine to a model, make sure to follow the model’s operating manual. If necessary, reinforce the engine mounting unit and the peripheral parts.[...]

  • Page 7

    7 FUEL • Mix gasoline (octane over 95) and high grade 2 cycle engine oil (mixing use type; F3C grade or ISO EGC grade) at mixing ratio 25~40:1. • The mixing ratio is according to the oil recommendation. [ NOTE ] 1) Never use any alcohol fuel or alcohol added fuel, or the rubber parts in the carburetor and engine will be damaged. 2) Gasoline is [...]

  • Page 8

    8 ENGINE ST ARTING • Push the primer pump several times until overflown fuel flows out. (Fig.1) • Close the choke lever, and move the throttle lever 1/4~1/3 open position. (Fig.1)(Fig.2) • Pull the starter(knob) quickly until first firing noise. (Fig.3) • Open the choke(Fig.2), throttle idle~1/4 open • Pull the starter quickly • Operate[...]

  • Page 9

    9 OPERA TION • This engine is already tuned up to get high power and high speed, and needs correct maintenance to keep such high performance. • The details for operation may be described in the separate owners manual to be issued by car manufacturer. • Be sure to have the engine cool down for 30 seconds at idle speed after full throttle runni[...]

  • Page 10

    10 MAINTENANCE 1) MAINTENANCE CHART Before Every Every Items Action Use 25 hours 100 hours Note Leakage, Check ✔ Damage/Crack Idling Speed Check/Adjust ✔✔✔ Air-cleaner Check/Cleaning ✔✔ Replace if necessary Spark Plug(gap) Check/Adjust ✔✔ ↑ Cylinder(barrel) Check/Cleaning ✔✔ ↑ Piston, Ring Check/Cleaning ✔✔ ↑ Muffler &[...]

  • Page 11

    11 MAINTENANCE 2) SPECIFICATIONS AND TECHNICAL DATA Items Unit G240RC G270RC Remarks Bore x Stroke mm 32 x 28 34 x 28 Displacement cm 3 22.5 25.4 Effective Compression Ratio 8.9 8.9 Type Walbro WT ← Carburetor Venture(mm) ø12.7 ← Starting Recoil Starter ← Type TCI ← Ignition Timing BTC 30°/8000rpm ← Standard CMR7H ← NGK CR8HIX with Te[...]

  • Page 12

    12 MAINTENANCE 3) MAINTENANCE SPECIFICATIONS G240RC G270RC Items Standard Limit Standard Limit Measuring Device Remarks Bore (mm) ø32 Plating damaged ø34 Plating damaged Eye Checking Diameter (mm) ø31.97 ø31.87 ø33.97 ø33.87 Micro Meter Piston Ring 0.81 0.91 1.01 1.11 Thickness Gauge Groove width (mm) Piston Pin Hole (mm) ø8.01 ø8.05 ø8.01[...]

  • Page 13

    13 MAINTENANCE 4) CARBURETOR Items Standard Limit Measuring Device Remarks Metering Lever set (mm) 1.65 ± 0.16 Vanier Inlet Valve Opening Pressure (kg/cm 2 ) 1.3~2.3 Leak Tester Inlet Valve Closing Pressure (kg/cm 2 ) 0.7~1.7 Leak Tester 5) IGNITION SYSTEM Items Standard Limit Measuring Device Remarks Spark Plug Air Gap (mm) 0.6~0.7 0.7 Thickness [...]

  • Page 14

    14 MAINTENANCE 6) TIGHTENING TORQUE Items Screw Size Standard (N·m) Limit (N·m) Remarks Carburetor M5 (P=0.8) 3.4 2.9~3.9 Insulator M5 (P=0.8) 4.4 3.9~4.9 with Locktight glue Clutch M6 (P=1.0) 6.4 4.9~7.8 Rotor M8 (P=1.0) 12.7 9.8~14.7 Cylinder M5 (P=0.8) 6.8 4.7~8.8 Crankcase M5 (P=0.8) 6.4 4.9~7.8 Spark Plug M10 (P=1.0) 10.8 8.8~12.8 Muffler M5[...]

  • Page 15

    15 SPECIAL TOOLS Part Name Part No. External Appearance Usage 1 Puller Assy 2890-96100 To remove rotor. 2 Piston Stopper 4810-96220 3 Rod Assy 1101-96220 To remove/install piston pin. 4 Air Gap Gauge 3330-97310 To set ignition coil. 5 Hex Wrench 3304-97611 6 Snap Ring Pliers 5500-96110 To remove snap ring. To hold crankshaft when disassembling/asse[...]

  • Page 16

    16 SERVICE GUIDE 1) REMOVING CLUTCH SHOE 1. Remove the housing and plug cap. 2. Remove the spark plug and fit the stopper(4810- 96220) into the plug hole. 3. Remove clutch bolts(14mm Hex.). 2) REMOVING ROTOR (FAN) 4. Remove the rotor nut(12mm Hex.). 5. Remove the rotor using the puller assy (2890-96100). Apply 8mm puller bolts. Clutch Bolt (14mm He[...]

  • Page 17

    17 SERVICE GUIDE 3) ASSEMBLING ROTOR Insert the gauge(3330-97310) in between the rotor magnet metal and the coil.Tighten screws while pressing the coil against the rotor. Air Gap 0.3 ~ 0.4mm 4) REMOVING PISTON PIN 1. Remove snap rings from both sides of the piston pin. 2. Engage the rod assy(1101-96220) to the piston pin and gently tap with a plast[...]

  • Page 18

    18 SERVICE GUIDE 5) INSTALLING PISTON 1. Make sure to point the arrow mark on the piston to the exhaust side. 2. Fit the circlip in the groove so as to face the end gap below. Deformed circlip may come off during engine operation and damage the engine. 6) CARBURETOR ADJUSTMENT The carburetor comes with a standard setting, it is for optimum performa[...]

  • Page 19

    19 TROUBLE SHOOTING 1) ENGINE DOES NOT START Description Cause Countermeasure No spark in the spark plug Spark Plug 1. Wet spark plug electrodes Make them dry 2. Carbon deposited on the electrodes Cleaning 3. Insulation failure by insulator damage Exchange 4. Inproper spark gap Adjust to 0.6~0.7mm 5. Burn out of electrodes Exchange Magneto 1. Ignit[...]

  • Page 20

    20 TROUBLE SHOOTING 2) LACK OF POWER OR UNSTABLE RUNNING Description Cause Countermeasure Compression is normal 1. Air penetration from fuel pipe joints, etc Secure connection and no misfire 2. Air penetration from intake tube joint or Change gasket or tightening screws carburetor joint 3. Water in fuel Change with good fuel 4. Piston start to seiz[...]

  • Page 21

    21 PA R TS LIST[...]

  • Page 22

    22 P ARTS LIST G240RC (X374323111)[...]

  • Page 23

    23 G240RC (X374323111)[...]

  • Page 24

    24 KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT 35 1140-21162 CASE, CLUTCH 1 36 3350-15250 BOLT 4 M5x16L 37 1140-55310 PLATE 1 38 0224-30614 BOLT 1 M6x14L 39 T2070-71110 ROTOR 1 40 T2070-71200 COIL-A 1 42 T2075-72210 CAP 1 43 1400-72121 SPRING 1 44 5500-72130 GROMMET 1 45 1260-71261 SPACE[...]

  • Page 25

    25 KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT 104 848ER883C0 • VALVE 1 105 1918-82160 • WASHER 1 107 T2070-31111 COVER, FAN 1 108 3310-12281 BOLT 4 M5x20L 109 848ER83111 COVER-A 1 110 1850-32160 SCREW 1 M4x12L 111 1900-31410 SCREW 2 TP4.5x18L 112 3699-91867 SPARKPLUG NGK CMR7H 1 113[...]

  • Page 26

    26 P ARTS LIST G270RC (X374326111)[...]

  • Page 27

    27 G270RC (X374326111)[...]

  • Page 28

    28 KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT 35 1140-21162 CASE, CLUTCH 1 36 3350-15250 BOLT 4 M5x16L 37 1140-55310 PLATE 1 38 0224-30614 BOLT 1 M6x14L 39 T2070-71110 ROTOR 1 40 T2070-71200 COIL-A 1 42 T2075-72210 CAP 1 43 1400-72121 SPRING 1 44 5500-72130 GROMMET 1 45 1260-71261 SPACE[...]

  • Page 29

    29 KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT 104 848ER883C0 • VALVE 1 105 1918-82160 • WASHER 1 107 T2070-31111 COVER, FAN 1 108 3310-12281 BOLT 4 M5x20L 109 T2070-32100 COVER-A 1 110 1850-32160 SCREW 1 M4x12L 111 1900-31410 SCREW 2 TP4.5x18L 112 3699-91867 SPARKPLUG NGK CMR7H 1 11[...]

  • Page 30

    30 W ARRANTY WARRANTY TERMS 1) Scope of Application This engine manufactured by Husqvarna Zenoah Co., Ltd. (herein after “Zenoah”). And sold to the user directly or through distributor/manufacturer, shall entitle to be covered by this warranty. 2) Limits of Warranty Zenoah warrants that; 1. The quality disclosed in the specifications. 2. The en[...]

  • Page 31

    31 W ARRANTY 4) Term of Warranty Three (3) months after purchased by end- user subject to 12 months from produced month. 5) Exempt from Warranty Zenoah shall not warrant this engine even if the fault has been caused during the period of terms of Warranty, in case that. 1. Any faults, failures caused from neglect of proper operation and maintenance [...]

  • Page 32

    Head Office : 1-9 Minamidai, Kawagoe-city, Saitama, 350-1165 Japan Phone: (+81)49-243-1115 Fax: (+81)49-243-7197[...]