English dropdown-ico

Zebra Technologies ZQ110 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Zebra Technologies ZQ110, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Zebra Technologies ZQ110 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Zebra Technologies ZQ110. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Zebra Technologies ZQ110 should contain:
- informations concerning technical data of Zebra Technologies ZQ110
- name of the manufacturer and a year of construction of the Zebra Technologies ZQ110 item
- rules of operation, control and maintenance of the Zebra Technologies ZQ110 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Zebra Technologies ZQ110 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Zebra Technologies ZQ110, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Zebra Technologies service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Zebra Technologies ZQ110.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Zebra Technologies ZQ110 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    P1 069085 -0 01 Rev. A ZQ110 Mobile Prin ter Com mand Man ual[...]

  • Page 2

    ZQ1 10 Rev . 1.00 - 2 - Mobile Printer Comman d Ma nu al Ta ble of Contents 1. Notice ............................................................................................................................. 6 2. Control Co mm ands List ............................................................................................... 6 3. Control [...]

  • Page 3

    ZQ1 10 Rev . 1.00 - 3 - Mobile Printer Comman d Ma nu al ■ P ropr ietary Statements This m anual co ntains propr ie tary information f or Zebra Tech nolog ie s Corporation. It is intended solel y for the inform ati on and use of parties operating and m ain taining the equ ip - m ent descri bed herein. Such proprietary i nfor m ati on m ay not be [...]

  • Page 4

    ZQ1 10 Rev . 1.00 - 4 - Mobile Printer Comman d Ma nu al Canadian Compliance Statement This Class B digital apparatus com pl ies w i th Canad i an ICES - 003. Cet appareil num é riq ue de la c l asse B est con forme á l a norm e NMB -00 3 du Canada. “IC:” be f ore the equipm ent certi fication num ber signifies that the Industry Canada techni[...]

  • Page 5

    ZQ1 10 Rev . 1.00 - 5 - Mobile Printer Comman d Ma nu al Copyright s The copyrights i n this m anual and the l a bel print engine described th ere in are owned by Zebra T echnologies Cor poration. Unauthorized re product i on of this m anual or the sof tware in the lab el pri nt engine m ay result in imprisonm ent of u p to one yea r and fines of u[...]

  • Page 6

    ZQ1 10 Rev . 1.00 - 6 - Mobile Printer Comman d Ma nu al 1. Notice This m anu al contains i nformation on the proto col and functions of all control comm ands that can be used w i t h the ZQ110 pr i nter. 2. Contro l Comman ds List No Command Name 1 EOT Transmit status 2 HT Hori z ontal tab 3 LF Print and line feed 4 FF Form feed (in p age m ode ) [...]

  • Page 7

    ZQ1 10 Rev . 1.00 - 7 - Mobile Printer Comman d Ma nu al No Command Name 31 ESC { Turn upside -dow n print mode on/off 32 FS & Se l ect Kanji character m o de 33 FS . Cancel Ka nji chara c ter mode 34 GS ! Select character size 35 GS $ Set absolute vertical print position in page m o de 36 GS ( A Ex ecute test print 37 GS ( F Set bla ck m ark c[...]

  • Page 8

    ZQ1 10 Rev . 1.00 - 8 - Mobile Printer Comman d Ma nu al 3. Control C omman ds Deta il s 3-1 Co mm and Not a tio n [Nam e] [Format] [Range] [Description] The na m e of the comm and. The code sequence: ASCII indicates the ASCII character equiva len t s. Hex indi c ates the hexadecim al e quivalents. Decimal indicates the decimal equivalent s. [ ] k [...]

  • Page 9

    ZQ1 10 Rev . 1.00 - 9 - Mobile Printer Comman d Ma nu al 3-3 Co ntrol C ommands Details EOT n [Nam e] [Format] [Range] [Description] T ransm i t status ASCII EOT n Hex 04 n Decimal 4 n 1 ≤ n ≤ 4 ▪ T ran sm its the status spec ified by n a s fo llows: n Function 1 T ransm i t printer status 2 T ransm i t off-line st atus 3 T ransm i t error st[...]

  • Page 10

    ZQ1 10 Rev . 1.00 - 10 - Mobile Printer Comman d Ma nu al n=3: Error status Bit Off/On Hex Decimal Functio n 0 Off 00 0 Fi x ed 1 On 02 2 Fi x ed 2 Off 00 0 Fi x ed 3 Off 00 0 Fi x ed 4 On 10 16 Fi x ed 5 Off 00 0 Fi x ed 6 Off 00 0 Fi x ed 7 Off 00 0 Fi x ed n=4: Continuous paper sensor status Bit Off/On Hex Decimal Function 0 Off 00 0 Fi x ed 1 O[...]

  • Page 11

    ZQ1 10 Rev . 1.00 - 11 - Mobile Printer Comman d Ma nu al HT [Nam e] [Format] [Description] [Ex a m ple ] Hori z ontal tab. ASCII HT Hex 09 Decimal 9 ▪ Moves the print position to the nex t horizon t al tab pos ition . ▪ Input: 0x 54 0x45 0x 53 0x54 0x0a 0x 54 0x09 0x 45 0x09 0x 53 0x 09 0 x54 0x0a ▪ Output: LF [Nam e] [Format] [Description] [...]

  • Page 12

    ZQ1 10 Rev . 1.00 - 12 - Mobile Printer Comman d Ma nu al FF [Nam e] [Format] [Description] [Ex a m ple ] If i n p age m ode, after printing, the printer is re turne d to standa rd m ode. ASCII FF Hex 0C Decimal 12 ▪ All data collected to the cu rren t po int is printed, and then the printer i s converted from p age m ode to standard m ode. ▪ A[...]

  • Page 13

    ZQ1 10 Rev . 1.00 - 13 - Mobile Printer Comman d Ma nu al DLE [Nam e] [Format] [Description] Set real- t i m e co mm an d m o de. ASCII DLE Hex 10 Decimal 16 ▪ Set real-ti m e comm and m ode. ▪ A si ngle co mm and f ollowing this comm and is r egarded as a real tim e comm and th at the printer ex ecutes u pon receiving it. ▪ The real tim e co[...]

  • Page 14

    ZQ1 10 Rev . 1.00 - 14 - Mobile Printer Comman d Ma nu al ES C SP [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] Set right- s i de character spac ing. ASCII ESC SP n Hex 1B 20 n Decimal 27 32 n 0 ≤ n ≤ 255 n=0 ▪ Sets the cha racte r sp acing for the r i ght side of the character to [n × ho rizonta l or vertica l motion units][...]

  • Page 15

    ZQ1 10 Rev . 1.00 - 15 - Mobile Printer Comman d Ma nu al ESC ! [Nam e] [Format] [Ra nge] [Default] [Description] [Ex a m ple ] Select print mode(s). ASCII ESC ! n Hex 1B 21 n Decimal 27 33 n 0 ≤ n ≤ 255 n=0 ▪ Selects pr in t m ode(s) u s i ng n as follow s : Bit Of f/On Hex Deci m al Function 0 Of f 00 0 Character font A (12 × 24) selected.[...]

  • Page 16

    ZQ1 10 Rev . 1.00 - 16 - Mobile Printer Comman d Ma nu al ESC $ [Nam e] [Format] [Range] [Description] [Ex a m ple ] Set absolute print position. ASCII ESC $ nL nH Hex 1B 24 nL nH Decimal 27 36 nL nH 0 ≤ (nL + nH x 256) ≤ 65535 (0 ≤ nH ≤ 255, 0 ≤ nL ≤ 25 5) ▪ Sets the nex t print st arting position, and the absolute pr int position, i[...]

  • Page 17

    ZQ1 10 Rev . 1.00 - 17 - Mobile Printer Comman d Ma nu al ESC * [Nam e] [Format] [Range] [Description] [Ex a m ple ] Select bit i m a ge m ode. ASCII ESC * m nL nH d1...dk Hex 1B 2A m nL nH d1...dk Decimal 27 42 m nL nH d1...dk m= 0, 1, 32, 33 1 ≤ (nL + nH x 256) ≤ 1023 (0 ≤ nL ≤ 255, 0 ≤ nH ≤ 3) 0 ≤ d ≤ 255 ▪ S pecifies t he b it[...]

  • Page 18

    ZQ1 10 Rev . 1.00 - 18 - Mobile Printer Comman d Ma nu al ESC – [Nam e] [F ormat] [Range] [Default] [Description] [Ex a m ple ] T urn underline m ode on/off. ASCII ESC - n Hex 1B 2D n Decimal 27 45 n 0 ≤ n ≤ 2, 48 ≤ n ≤ 50 n=0 ▪ T urn underline m ode o n or off , bas ed on the following va l ues of n: n Function 0,48 T urns off unde rli[...]

  • Page 19

    ZQ1 10 Rev . 1.00 - 19 - Mobile Printer Comman d Ma nu al ESC 2 [Nam e] [Format] [Description] Select default line spacing. ASCII ESC 2 Hex 1B 32 Decimal 27 50 ▪ The default line sp acing is a pprox imately 3.75 m m, which i s equivalent to 30 dots. ESC 3 [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] Set line spacing ASCII ESC 3 [...]

  • Page 20

    ZQ1 10 Rev . 1.00 - 20 - Mobile Printer Comman d Ma nu al ESC = [Nam e] [Format] [Range] [Default] [Description] Select peripheral device ASCII ESC = n Hex 1B 3D n Decimal 27 61 n 1 ≤ n ≤ 3 n = 1 ▪ The select ion o f per i p her a l s accord i ng to th e n value is as fo l low s. n Function 1,3 Printer Acti vation 2 Printer Deactivation ESC @[...]

  • Page 21

    ZQ1 10 Rev . 1.00 - 21 - Mobile Printer Comman d Ma nu al [Ex a m ple ] ▪ Input: 0x48 0x 09 0x48 0 x09 0x 48 0x09 0 x 48 0x0a 0x1b 0x 44 0x0a 0 x14 0x 1e 0x00 0x48 0x 09 0x48 0 x09 0x 48 0x09 0 x 48 0x0a ▪ Output: ESC E [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] T urn emphasized m ode on / off. ASCII ESC E n Hex 1B 45 n Deci[...]

  • Page 22

    ZQ1 10 Rev . 1.00 - 22 - Mobile Printer Comman d Ma nu al ESC G [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] T urn double- s trike mode on/off. ASCII ESC G n Hex 1B 47 n Decimal 27 71 n 0 ≤ n ≤ 255 n=0 ▪ T urn s double-stri ke m ode on or off. - W hen the LS B of n is 0, double-stri ke m ode i s turned of f. - W hen the LS B[...]

  • Page 23

    ZQ1 10 Rev . 1.00 - 23 - Mobile Printer Comman d Ma nu al ESC J [Nam e] [Format] [Range] [Description] [Ex a m ple ] Print and feed paper . ASCII ESC J n Hex 1B 4A n Decimal 27 74 n 0 ≤ n ≤ 255 ▪ Prin t s the data in the print buf fer and feeds the paper [n X vert i ca l m otio n uni t ]. ▪ Input: 0x41 0x 42 0x43 0 x44 0x 45 0x1b 0x 4a 0x50[...]

  • Page 24

    ZQ1 10 Rev . 1.00 - 24 - Mobile Printer Comman d Ma nu al ESC M [Nam e] [Format] [Range] [Default] [Description] [Notes] Select character font./ MSR card r ead ASCII ESC M n Hex 1B 4D n Decimal 27 77 n n = 0, 1, 48 , 49 , 67, 68 , 69, 70, 71, 72, 73 n=0 ▪ Selects on ly -byte character font s ▪ Selects Card reade r mode n Function 0, 48 Characte[...]

  • Page 25

    ZQ1 10 Rev . 1.00 - 25 - Mobile Printer Comman d Ma nu al [Ex a m ple ] - W hen MS R set to T rack 1/2/ 3 Read mode START cha racters (Max 10 byte) Max DAT A 76 charac ters (1Track data) END cha racters (Max 10 byte) 0DH 0 AH START cha racters (Max 10 byte) Max DAT A 37 charac ters (2Track data) END cha racters (Max 10 byte) 0DH 0 AH START cha ract[...]

  • Page 26

    ZQ1 10 Rev . 1.00 - 26 - Mobile Printer Comman d Ma nu al ESC R [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] Select an international character set. ASCII ESC R n Hex 1B 52 n Decimal 27 82 n 0 ≤ n ≤ 13 n=0 ▪ Selects internationa l ch aracte r set in from the following table : n Character set n Character set 0 U.S.A 7 S pain I[...]

  • Page 27

    ZQ1 10 Rev . 1.00 - 27 - Mobile Printer Comman d Ma nu al 0x1b 0x 52 0x0a 0x23 0x 24 0x40 0 x5b 0x 5c 0x5d 0x5e 0x60 0x7b 0x 7c 0 x7d 0x 7e 0x0a 0x1b 0x 52 0x0b 0x23 0x 24 0x40 0 x5b 0x 5c 0x5d 0 x5e 0x60 0x 7b 0x7c 0 x 7d 0x7e 0x0a 0x1b 0x 52 0x0c 0x23 0x 24 0x40 0 x5b 0x 5c 0x5d 0x5e 0x60 0x7b 0x 7c 0 x7d 0x 7e 0x0a 0x1b 0x 52 0x0d 0x23 0x 24 0x4[...]

  • Page 28

    ZQ1 10 Rev . 1.00 - 28 - Mobile Printer Comman d Ma nu al ESC T [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] Select print direction in page m od e. ASCII ESC T n Hex 1B 54 n Decimal 27 84 n 0 ≤ n ≤ 3, 48 ≤ n ≤ 51 n=o ▪ Selects the print d ir ection and st arting pos i t ion in page mode. n Print D irection S tarting Posi[...]

  • Page 29

    ZQ1 10 Rev . 1.00 - 29 - Mobile Printer Comman d Ma nu al ESC W [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] Set relative print position. ASCII ESC W xL xH yL yH dxL dxH dyL dyH Hex 1B 57 xL xH yL yH dxL dxH dyL dyH Decimal 27 87 xL xH yL yH dxL dxH dyL dyH 0 ≤ (xL + xH x 256) ≤ 65535 (0 ≤ x L ≤ 255, 0 ≤ xH ≤ 255) 0 ?[...]

  • Page 30

    ZQ1 10 Rev . 1.00 - 30 - Mobile Printer Comman d Ma nu al ESC ＼ [Nam e] [Format] [Range] [Description] [Ex a m ple ] Set relative print position. ASCII ESC ＼ n nH Hex 1B 5C nL nH Decimal 27 92 nL nH 0 ≤ (nL + nH x 256) ≤ 65535 (0 ≤ nL 255, 0 ≤ nH ≤ 255) ▪ Set the print starting pos i t i on based on the current position to [(nL +[...]

  • Page 31

    ZQ1 10 Rev . 1.00 - 31 - Mobile Printer Comman d Ma nu al ESC a [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] Select justification. ASC I ESC a n Hex 1B 61 n Decimal 27 97 n 0 ≤ n ≤2, 48 ≤ n ≤50 n=0 ▪ In standard m ode, ali gns a ll the data in one line to the pos i t i on spec ifie d by n as follows: n Justi f i catio[...]

  • Page 32

    ZQ1 10 Rev . 1.00 - 32 - Mobile Printer Comman d Ma nu al ESC d [Nam e] [Format] [Range] [Description] [Ex a m ple ] Print and feed n lines. ASCII ESC d n Hex 1B 64 n Decimal 27 10 0 n 0 ≤ n ≤ 255 ▪ Prin t s the data in the print buf fer and feeds n lines. ▪ Input: 0x31 0x 73 0x74 0x0a 0x0a 0x32 0x 6e 0x64 0x1b 0x 64 0x02 0x33 0x 72 0x64 0x[...]

  • Page 33

    ZQ1 10 Rev . 1.00 - 33 - Mobile Printer Comman d Ma nu al ESC t [Nam e] [Format] [Rang e] [Default] [Description] Select character code tab le. ASCII ESC t n Hex 1B 74 n Decimal 27 1 16 n 0 ≤ n ≤ 5, 16 ≤ n ≤ 19, 21 ≤ n ≤ 31, 33 ≤ n ≤ 41, n =255 For model not supporting Thai character: n=0 For model s upport i ng Thai character suppo[...]

  • Page 34

    ZQ1 10 Rev . 1.00 - 34 - Mobile Printer Comman d Ma nu al ESC { [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] T urns upside-down pr i nting m od e on/off. ASCII ESC { n Hex 1B 7B n Decimal 27 123 n 0 ≤ n ≤ 255 n=0 ▪ T urn s upside-dow n pr inting m ode on o r of f. - W hen the LS B of n is 0, upside-down printing mode is turn[...]

  • Page 35

    ZQ1 10 Rev . 1.00 - 35 - Mobile Printer Comman d Ma nu al GS ! [Nam e] [Format] [Range] [Default] [Description] Select character size. ASCII GS ! n Hex 1D 21 n Decimal 29 33 n 0 ≤ n ≤ 255 (where 1 ≤ Enlargem e nt in vertical direct i on ≤ 8 , 1 ≤ Enlargem ent in horizontal direct i on ≤ 8) n=0 ▪ Selects character s ize (enlargement in[...]

  • Page 36

    ZQ1 10 Rev . 1.00 - 36 - Mobile Printer Comman d Ma nu al [Ex a m ple ] ▪ Input: 0x41 0x 42 0x43 0a 0x1d 0x 21 0x20 0x41 0x 42 0x43 0a 0x1d 0x 21 0x02 0x41 0x 42 0x43 0a 0x1d 0x 21 0x44 0x41 0x 42 0x43 0a ▪ Output: GS $ [Nam e] [Format] [Range] [Description] [Ex a m ple ] Set absolute vertical print position in page m o de. ASCII GS $ nL nH Hex[...]

  • Page 37

    ZQ1 10 Rev . 1.00 - 37 - Mobile Printer Comman d Ma nu al ▪ Output: GS ( A [Nam e] [Format] [Range] [Description] [Notes] Ex ecute test print. ASCII GS ( A pL pH n m He  1D 28 41 pL pH n m Decimal 29 40 65 pL pH n m (pL + pH x 256) = 2 (pL=2, pH=0) 0 ≤ n ≤ 2, 48 ≤ n ≤ 50 1 ≤ m ≤ 3, 49 ≤ m ≤ 51 ▪ Ex ecutes a test print w i th [...]

  • Page 38

    ZQ1 10 Rev . 1.00 - 38 - Mobile Printer Comman d Ma nu al GS ( F [Nam e] [Description] [Notes] Set bl ack m ark control functions. ▪ Th i s comm and perf orm s vari ous functions to control the b lack mark(BM) paper as follow s: m Format Function 2 GS ( F pL pH m a nL nH Set s the paper feed amount to adjust the paper cutting posit i on af ter se[...]

  • Page 39

    ZQ1 10 Rev . 1.00 - 39 - Mobile Printer Comman d Ma nu al <Function 1 12> GS ( F pL pH m aL aH bL bH (m =1 12) [Format] [Range] [Default] [Description] [Notes] ASCII GS ( F pL pH m aL aH bL bH Hex 1D 28 46 05 00 70 aL aH bL bH Decimal 29 40 70 5 0 223 aL aH bL bH (pL + pH × 25 6) = 5 ( pL = 5, pH = 0) m = 1 12 0 ≤ (aL + aH × 256) ≤ 6553[...]

  • Page 40

    ZQ1 10 Rev . 1.00 - 40 - Mobile Printer Comman d Ma nu al GS ( k pL p H cn fn [param e ter] [Nam e] [Description] S peci fy and pr i nt the sym b ol. ▪ Processes the data co ncer n i ng tw o -di m ensional code. - Sy m bol typ e i s spec ified by cn. - Fun ction is spe c i f i ed by fn. cn T ype of Sym bol 48 PDF417 49 QR COD E 51 DA T AMA TRIX 5[...]

  • Page 41

    ZQ1 10 Rev . 1.00 - 41 - Mobile Printer Comman d Ma nu al <Function 065> GS ( k p L pH cn f n n (fn=65 ) [Format] [Range] [Default] [Description] [Notes] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 30 41 n Decimal 29 40 107 3 0 48 65 n (pL + pH x 256) = 3 (pL=3, pH=0) cn=48, fn=65 0 ≤ n ≤ 30 n=0 S peci fies the num be r of columns of th[...]

  • Page 42

    ZQ1 10 Rev . 1.00 - 42 - Mobile Printer Comman d Ma nu al <Function 067> GS ( k p L pH cn f n n (fn=67 ) [Format] [Range] [Default] [Description] [Notes] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 30 43 n Decimal 29 40 107 3 0 48 67 n (pL + pH x 256) = 3 (pL=3, pH=0) cn=48 fn=67 2 ≤ n ≤ 3 n=3 S peci fies the width of a m odul e of PDF4[...]

  • Page 43

    ZQ1 10 Rev . 1.00 - 43 - Mobile Printer Comman d Ma nu al [Default] [Description] [Notes] n=1 S peci fies the error correct io n leve l of PDF4 17. m Function 48 The error correction level is spec i fied by “ l evel” ▪ Settings of this function af fect the processing of Functions 081. ▪ Error correct i on level is spec ifie d by “ le vel [...]

  • Page 44

    ZQ1 10 Rev . 1.00 - 44 - Mobile Printer Comman d Ma nu al <Function 080> GS ( k p L pH cn f n m d1...d k (fn=80) [Format] [Range] [Description] [Notes] ASCII GS ( k pL pH cn fn m d1...dk Hex 1D 28 6B pL pH 30 50 30 d1...dk Decimal 29 40 107 pL pH 48 80 48 d1...dk 4 ≤ (pL + pH x 256) ≤ 65535 (0 ≤ pL ≤ 255, 0 ≤ pH ≤ 255) cn=48 fn=80[...]

  • Page 45

    ZQ1 10 Rev . 1.00 - 45 - Mobile Printer Comman d Ma nu al [Ex a m ple ] ▪ The foll owing da t a is added autom at ically by the encode processing: - S t art pattern and stop p attern. - Indicator code word of left and r igh t. - The descriptor of sym bol le ngth. ( the fir s t code word in the dat a area) - The error correct i on code w or d calc[...]

  • Page 46

    ZQ1 10 Rev . 1.00 - 46 - Mobile Printer Comman d Ma nu al ▪ Output <Function 165> GS ( k p L pH cn f n n1 n2 ( fn= 65) [Format] [Range] [Defaults] [Description] [Notes] ASCII GS ( k pL pH cn fn n1 n2 Hex 1D 28 6B 04 00 31 41 n1 0 Decimal 29 40 107 3 0 49 65 n1 0 (pL + pH x 256) = 3 (pL=3, p H= 0) cn=49 fn =65 n1 = 49, 50 n2 = 0 n1 = 50 , n2[...]

  • Page 47

    ZQ1 10 Rev . 1.00 - 47 - Mobile Printer Comman d Ma nu al <Function 169> GS ( k pL pH cn fn n (fn=69 ) [Format] [Range] [Default] [Description] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 31 45 n Decimal 29 40 107 3 0 49 69 n (pL + pH x 256) = 3 (pL=3, pH=0) cn=49 fn=69 48≤n≤ 51 n=48 Set s the e rror correction leve l o f t he QR code n[...]

  • Page 48

    ZQ1 10 Rev . 1.00 - 48 - Mobile Printer Comman d Ma nu al <Function 181> GS ( k p L pH cn f n m (fn =81) [Format] [Range] [Description] [Notes] ASCII GS ( k pL pH cn fn m Hex 1D 28 6B 03 00 31 51 m Decimal 29 40 107 3 0 49 81 m (pL + pH x 256) = 3 (pL=3, pH=0) cn=49 fn=81 m=48 Encodes and prints QR CODE sym bo l da t a saved in the storage ar[...]

  • Page 49

    ZQ1 10 Rev . 1.00 - 49 - Mobile Printer Comman d Ma nu al [Ex a m ple ] ▪ Input 0x1d 0x 28 0x6b 0 x04 0x 00 0x31 0 x 41 0x32 0x00 0x1d 0x 28 0x6b 0 x03 0x 00 0x31 0 x 43 0x05 0x1d 0x 28 0x6b 0 x03 0x 00 0x31 0 x 45 0x31 0x1d 0x 28 0x6b 0 x1b 0x 00 0x31 0 x50 0x 30 0x5a 0x 51 0x31 0 x31 0x 30 0x5f 0x5a 0x65 0x62 0x72 0x61 0x 20 0x54 0 x65 0x 63 0x[...]

  • Page 50

    ZQ1 10 Rev . 1.00 - 50 - Mobile Printer Comman d Ma nu al <Function 367> GS ( k p L pH cn n ( fn=67) [Format] [Range] [Default] [Description] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 33 43 n Decimal 29 40 107 3 0 51 67 n (pL + pH x 256) = 3 (pL=3, pH=0) cn=51 fn=67 2<=n<7 n=3 Set s the DA T AMA TRIX code si ze ▪ It im pact s the [...]

  • Page 51

    ZQ1 10 Rev . 1.00 - 51 - Mobile Printer Comman d Ma nu al <Function 381> GS ( k p L pH cn fn m (fn=81) [Format] [Range] [Description] [Notes] [Ex a m ple ] ASCII GS ( k pL pH cn fn m Hex 1D 28 6B 03 00 33 51 m Decimal 29 40 107 3 0 51 81 m (pL + pH x 256) = 3 (pL=3, pH=0) cn=51 fn=81 m=48 Encodes and prints DA T AM A TRIX sy mbol data saved i[...]

  • Page 52

    ZQ1 10 Rev . 1.00 - 52 - Mobile Printer Comman d Ma nu al ▪ Output: <Function 465> GS ( k p L pH cn f n n (fn=65) [Format] [Range] [Default] [Description] [Notes] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 34 41 n Decimal 29 40 107 3 0 52 65 n (pL + pH x 256) = 3 (pL=3, pH=0) cn=52 fn=65 50<=n<=60 n=50 Selects the GS1 Databar . n F[...]

  • Page 53

    ZQ1 10 Rev . 1.00 - 53 - Mobile Printer Comman d Ma nu al <Function 466> GS ( k p L pH cn f n n (fn=66) [Format] [Range] [Default] [Description] [Notes] ASCII GS ( k pL pH cn fn n1 n2 Hex 1D 28 6B 03 00 34 42 n1 n2 Decimal 29 40 107 3 0 52 66 n1 n2 (pL + pH x 256) = 3 (pL=3, pH=0) cn=52 fn=66 1<=n1<=8, 1<=n2<=8 n1=2 n2=2 Set the s[...]

  • Page 54

    ZQ1 10 Rev . 1.00 - 54 - Mobile Printer Comman d Ma nu al <Function 470> GS ( k p L pH cn f n n (fn=70 ) [Format] [Range] [Default] [Description] [Notes] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 34 46 n Decimal 29 40 107 3 0 52 70 n (pL + pH x 256) = 3 (pL=3, pH=0) cn=52 fn=70 1<=n<=2 n=2 S peci fy the height of sep arator betw een[...]

  • Page 55

    ZQ1 10 Rev . 1.00 - 55 - Mobile Printer Comman d Ma nu al [Notes] ▪ The dat a stored to the sym bol sto rage a rea by this comm and i s executed by Function 481. The data rem ai ns reserved in the symbol storage area. ▪ Encodes a Global T rade Item Nu mber(GTIN ) and AI’s(Applicat ion Identifiers) ▪ GS1 DataBar ho l ds a 14-digit num ber . [...]

  • Page 56

    ZQ1 10 Rev . 1.00 - 56 - Mobile Printer Comman d Ma nu al ▪ output: <Function 565> GS ( k p L pH cn f n n (fn=65 ) [Format] [Range] [Default] [Description] [Notes] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 35 41 n Decimal 29 40 107 3 0 53 65 n (pL + pH x 256) = 3 (pL=3, pH=0) cn=53 fn=65 1<=n<=8 n=2 Set the size of .the Aztec barc[...]

  • Page 57

    ZQ1 10 Rev . 1.00 - 57 - Mobile Printer Comman d Ma nu al <Function 567> GS ( k p L pH cn f n n (fn=67 ) [Format] [Range] [Default] [Description] [Notes] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 35 43 n Decimal 29 40 107 3 0 53 67 n (pL + pH x 256) = 3 (pL=3, pH=0) cn=53 fn=67 0<=n<=2 n=0 Set the m ode of .the Aztec barcode m odul [...]

  • Page 58

    ZQ1 10 Rev . 1.00 - 58 - Mobile Printer Comman d Ma nu al <Function 581> GS ( k p L pH cn f n m (fn =81) [Format] [Range] [Default] [Description] [Notes] ASCII GS ( k pL pH cn fn m Hex 1D 28 6B 03 00 35 51 m Decimal 29 40 107 3 0 53 81 m (pL + pH x 256) = 3 (pL=3, pH=0) cn=53 fn=81 m=48 none This command encod es a nd prints Aztec barcode sym[...]

  • Page 59

    ZQ1 10 Rev . 1.00 - 59 - Mobile Printer Comman d Ma nu al GS ( E [Nam e] [Description] [Notes] Set NV user m e m ory area This comm and store s the customized values t o the NV use r m e m ory area and uses them for the p rinter operat i on. The t abl e be l ow explains th e functions avail able in t his c ommand. Ex ecute commands rel ated to t he[...]

  • Page 60

    ZQ1 10 Rev . 1.00 - 60 - Mobile Printer Comman d Ma nu al <Function 1> GS ( E pL pH fn d1 d2 (fn =1) [Format] [Range] [Description] [Notes] ASCII GS ( E pL pH fn d1 d2 Hex 1D 28 45 pL pH fn d1 d2 Decimal 29 40 69 pL pH fn d1 d2 (pL + pH x 256) = 3 (pL=3, pH=0) fn=1 d1=73, d2=78 This comm and starts the user setting m ode, enab ling the pr i n[...]

  • Page 61

    ZQ1 10 Rev . 1.00 - 61 - Mobile Printer Comman d Ma nu al <Function 3 > GS ( E pL pH fn [a1 b18...b11]...[ak bk8...bk1] (fn=3) [Format] [Range] [Default] [Description] ASCII GS ( E pL pH fn [b18...b1 1]... [bk8...bk1] Hex 1D 28 45 pL pH fn [b18...b1 1]... [bk8...bk1] Decimal 29 40 69 pL pH fn [b18...b1 1]... [bk8...bk1] 10 ≤ (pL + pH x 256)[...]

  • Page 62

    ZQ1 10 Rev . 1.00 - 62 - Mobile Printer Comman d Ma nu al ▪ The setting item s o f the m e mory sw i tch 2 are as follows: Code page select io n using the m emory sw itch 2 -3 through 2- 8. M SW 2- 8 M SW 2- 7 M SW 2 - 6 M SW 2 - 5 M SW 2 - 4 M SW 2- 3 Character Table 48 48 48 48 48 48 PC437 48 48 48 48 49 48 Katakana 48 48 48 49 48 48 PC850 48 4[...]

  • Page 63

    ZQ1 10 Rev . 1.00 - 63 - Mobile Printer Comman d Ma nu al ▪ The sett ing ite m s of the m e m ory s witch 5 are as follows: S peci fy the length of idle t ime before the printer enters the pow er -d ow n m ode. - Range of idle tim e : 0 m in ≤ idle tim e ≤ 9 0 m in W hen m e m ory s witch value is 0, t he po w er -dow n mode is no t active MS[...]

  • Page 64

    ZQ1 10 Rev . 1.00 - 64 - Mobile Printer Comman d Ma nu al ▪ The sett ing ite m s of the m e m ory s witch 8 are as follows: - Either the character font A or B or C is se l ected. - The beep i s activated f or the audible paper e m pty w arni ng signal. - The beep i s activated f or the audible low battery warning signal. - The labe l p rinting i [...]

  • Page 65

    ZQ1 10 Rev . 1.00 - 65 - Mobile Printer Comman d Ma nu al <Function 4> GS ( E pL pH fn a (fn=4) [Format] [Range] [Description] ASCII GS ( E pL pH fn a Hex 1D 28 45 pL pH fn a Decimal 29 40 69 pL pH fn a (pL + pH x 256) = 2 (pL=2, pH=0) fn=4 a=1, 2, 5, 6 , 7, 8 This comm and tran smits the sett i ng va lu e of t he m e m ory s w i tch corresp [...]

  • Page 66

    ZQ1 10 Rev . 1.00 - 66 - Mobile Printer Comman d Ma nu al GS ( L, GS 8 L [Nam e] [Format] [Description] [Notes] Select graphics data ASCII GS ( L pL pH m fn [param eter] Hex 1D 28 4C pL pH m fn [param eter] Decimal 29 40 76 pL pH m fn [param eter] ASC II GS 8 L p1 p2 p3 p4 m fn [param eter] Hex 1D 38 4C p1 p2 p3 p4 m fn [param eter] Decimal 29 56 7[...]

  • Page 67

    ZQ1 10 Rev . 1.00 - 67 - Mobile Printer Comman d Ma nu al <Function 48> GS ( L pL pH m fn (fn =0, 48) [Format] [Range] [Description] ASCII GS ( L pL pH m fn Hex 1D 28 4C pL pH m fn Decimal 29 40 76 pL pH m fn (pL + pH x 256) = 2 (pL=2, pH=0) m=48, fn=0, 48 T ransm i ts the tot al capacity of th e NV bit -im age memory (number of bytes in the [...]

  • Page 68

    ZQ1 10 Rev . 1.00 - 68 - Mobile Printer Comman d Ma nu al <Function 51> GS ( L pL pH m fn (fn =3, 51) [Format] [Range] [Description] ASCII GS ( L pL pH m fn Hex 1D 28 4C pL pH m fn Decimal 29 40 76 pL pH m fn (pL + pH x 256) = 2 (pL=2, pH=0) m=48, fn=3, 51 T ransm i ts the num ber of byte s of re m aining mem ory (unu sed area) in the NV user[...]

  • Page 69

    ZQ1 10 Rev . 1.00 - 69 - Mobile Printer Comman d Ma nu al ▪ Af ter th e [Header-NULL] is transm itt ed, the p ri nter rece i ves a response from the h ost; then it perform s the proce ss defined by the response. (See the tables be l ow .) - W hen the st atus (ex iste nce of the nex t data block) is Hexadecimal = 41H / Decim al = 65 Response Proce[...]

  • Page 70

    ZQ1 10 Rev . 1.00 - 70 - Mobile Printer Comman d Ma nu al <Function 67> GS ( L pL pH m fn a kc1 kc2 b x L x H yL yH [c d1...d k]1...[c d1...dk]b (fn=67) [Format] [Range] [Description] [Notes] ASCII GS ( L pL pH m fn a kc1 kc2 b xL xH yL yH [ c d1 . ..dk ]1. . .[c d1 . ..dk ]b Hex 1D 28 4C pL pH m fn a kc1 kc2 b xL xH yL y H [c d1 . ..dk ]1. .[...]

  • Page 71

    ZQ1 10 Rev . 1.00 - 71 - Mobile Printer Comman d Ma nu al <Function 112> GS ( L pL pH m fn a bx by c xL xH yL yH d1...dk ( fn=112) [Format] [Range] [Description] [Notes] ASCII GS ( L pL pH m fn a bx by c x L xH yL yH d1...d k Hex 1D 28 4C pL pH m fn a bx by c x L xH yL yH d1...d k Decimal 29 40 76 pL pH m fn a bx by c x L xH yL yH d1...d k ?[...]

  • Page 72

    ZQ1 10 Rev . 1.00 - 72 - Mobile Printer Comman d Ma nu al GS B [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] T urns white/black reverse pr i nting m od e on / of f. ASCII GS B n Hex 1D 42 n Decimal 29 66 n 0 ≤ n ≤ 2 55 n=0 ▪ T urn s w hite/black reverse printing m ode on or off. - W hen the LS B of n is 0, white/black reverse[...]

  • Page 73

    ZQ1 10 Rev . 1.00 - 73 - Mobile Printer Comman d Ma nu al [Ex a m ple ] ▪ Input: 0x1d 0x 68 0x50 0x1d 0x 48 0x00 0x1d 0 x6b 0x49 0 x0a 0 x31 0 x32 0x33 0 x34 0x35 0 x36 0x37 0 x 38 0 x39 0x30 0x1b 0x 64 0x03 0x1d 0x 48 0x01 0x1d 0 x6b 0x49 0 x0a 0 x31 0 x32 0x33 0 x34 0x35 0 x36 0x37 0 x 38 0 x39 0x30 0x1b 0x 64 0x03 0x1d 0x 48 0x02 0x1d 0 x6b 0x[...]

  • Page 74

    ZQ1 10 Rev . 1.00 - 74 - Mobile Printer Comman d Ma nu al GS I [Nam e] [Format] [Range] [Description] T ransm i ts pr in ter ID. ASCII GS I n Hex 1D 49 n Decimal 29 73 n 1 ≤ n ≤ 69, ▪ T ran sm its the pr in ter ID spec i fied. - T r ansm its 1 byte of printer ID, us i ng n as fo llows: n Printer ID ID 1,49 Printer model ID 65 2,50 T ype ID 0([...]

  • Page 75

    ZQ1 10 Rev . 1.00 - 75 - Mobile Printer Comman d Ma nu al GS I b [Nam e] [Format] [Description] [Notes] T ransm i ts battery st atus. ASCII GS I b Hex 1D 49 62 Decimal 29 73 98 T ransm i ts the battery p ower status of the pr i nter The transm itte d ba ttery status from th is printer is constructed by [Header ~ NUL] as shown in t he table be lo w [...]

  • Page 76

    ZQ1 10 Rev . 1.00 - 76 - Mobile Printer Comman d Ma nu al GS L [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] Set left m argi n. ASCII GS L nL nH Hex 1D 4C nL nH Decimal 29 76 nL nH 0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255 (nL + nH x 256)=0 (nL=0, nH=0) ▪ Sets the le f t m argi n specified by nL an d nH. - The left m ar gin is [(nL + n [...]

  • Page 77

    ZQ1 10 Rev . 1.00 - 77 - Mobile Printer Comman d Ma nu al GS T [Nam e] [Format] [Range] [Description] [Notes] [Ex a m ple ] Set print position to the beginn i ng of print line. ASCII GS T n Hex 1D 54 n Decimal 29 84 n n=0, 1, 48, 49 ▪ Th i s comm and sets the print position to the beginning of the print line. - n spe c i f i es how data in the pr[...]

  • Page 78

    ZQ1 10 Rev . 1.00 - 78 - Mobile Printer Comman d Ma nu al GS W [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] Set printing area width. ASCII GS W nL nH Hex 1D 57 nL nH Decimal 29 87 nL nH 0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255 (nL + nH x 256)=384 (nL=128, nH=1) (for 58m m of the paper width ) ▪ Sets the printing area w idth specified [...]

  • Page 79

    ZQ1 10 Rev . 1.00 - 79 - Mobile Printer Comman d Ma nu al GS ＼ [Nam e] [Format] [Range] [Description] [Ex a m ple ] Set relative vertical print position in p age mode. ASCII GS ＼ nL nH Hex 1D 5C nL nH Decimal 29 92 nL nH 0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255 ▪ Sets the relative vert i c al print st arting pos ition from the current position in p[...]

  • Page 80

    ZQ1 10 Rev . 1.00 - 80 - Mobile Printer Comman d Ma nu al GS ^ [Nam e] [Format] [Range] [Description] Ex ecute m acro. ASCII GS ^ r t m Hex 1D 5E r t m Decimal 29 94 r t m 0 ≤ r ≤ 255 0 ≤ t ≤ 255 m=0, 1 ▪ Ex ecutes a m acro. - r spe c i fies the n um ber o f times to ex ecute t he m acro. - t specifies the waiting time for executing the m[...]

  • Page 81

    ZQ1 10 Rev . 1.00 - 81 - Mobile Printer Comman d Ma nu al ▪ The pr inter infor m ation tran sm itted is com pri sed of 4 b y tes as follows: - Fir st byte( pr inter infor m ation) Bit Off /On Hex Decimal Function 0 Off 00 0 Not used. Fi x ed to Off 1 Off 00 0 Not used. Fi x ed to Off 2 On 04 4 Not used. Fi x ed to On 3 Off 00 0 On -line On 08 8 O[...]

  • Page 82

    ZQ1 10 Rev . 1.00 - 82 - Mobile Printer Comman d Ma nu al GS f [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] Select font for HRI cha racters. ASCII GS f n Hex 1D 66 n Decimal 29 102 n n=0, 1, 48, 49 n=0 ▪ Selects a font for th e HRI characters used when printing a bar code. - n spe c i f i es the fo nt o f the HRI characters as f[...]

  • Page 83

    ZQ1 10 Rev . 1.00 - 83 - Mobile Printer Comman d Ma nu al GS h [Nam e] [Format] [Range] [Default] [Description] [Ex a m ple ] Selects bar code he ig ht. ASCII GS h n Hex 1D 68 n Decimal 29 104 n 1 ≤ nL ≤ 255 n=162 ▪ Selects the he i ght of t he bar code as n dots. ▪ Input: 0x1d 0x 68 0x40 0x1d 0 x6b 0x49 0 x 0a 0 x31 0x32 0 x33 0 x34 0x35 0[...]

  • Page 84

    ZQ1 10 Rev . 1.00 - 84 - Mobile Printer Comman d Ma nu al GS k [Nam e] [Format] [Range] [Description] Print bar code. ① ASCII GS k m d1...dk NUL Hex 1D 6B m d1...dk NUL Decimal 29 107 m d1...dk NUL ② ASCII GS k m n d1...dn Hex 1D 6B m n d1...dn Decimal 29 107 m n d1...dn ① 0 ≤ m ≤ 6 ( k and d depend on the bar code system used ) ② 65 ?[...]

  • Page 85

    ZQ1 10 Rev . 1.00 - 85 - Mobile Printer Comman d Ma nu al [Ex a m ple ] ▪ Input: 0x1d 0x 68 0x50 0x1d 0x 77 0x02 0x 1d 0x6b 0x06 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x 38 0x39 0x30 0x41 0x 42 0x43 0 x00 0x0a 0x 1d 0x6b 0x49 0x0d 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x30 0x 41 0x42 0 x43 0x0a ▪ Output: GS r [Nam e] [Format] [Range] [Descr[...]

  • Page 86

    ZQ1 10 Rev . 1.00 - 86 - Mobile Printer Comman d Ma nu al GS v 0 [Nam e] [Format] [Range] Print raster bit im age. ASCII GS v 0 m xL xH yL yH d1...dk Hex 1D 76 30 m xL xH yL yH d1...dk Decimal 29 11 8 48 m xL xH yL yH d1...dk 0 ≤ m ≤ 3, 48 ≤ m ≤ 51 1 ≤ (xL + xH x 256) ≤ 128 (0 ≤ x L ≤ 128, xh=0) 1 ≤ (yL + yH x 256) ≤ 4095 (0 ≤[...]

  • Page 87

    ZQ1 10 Rev . 1.00 - 87 - Mobile Printer Comman d Ma nu al [Ex a m ple ] ▪ Input: 0x1d 0x 68 0x50 0x1d 0x 77 0x02 0x1d 0x 6b 0 x46 0x0a 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x30 0x0a 0x1d 0x 77 0x04 0x1d 0x 6b 0 x46 0x0a 0x31 0x32 0x33 0 x 34 0x35 0 x36 0 x 37 0 x38 0x39 0x30 0x0a ▪ Output: BS L A [Nam e] [Format] [Description] [Notes] E[...]

  • Page 88

    ZQ1 10 Rev . 1.00 - 88 - Mobile Printer Comman d Ma nu al BS L R [Nam e] [Format] [Description] [Notes] Change receipt mode. ASCII BS L R Hex 08 4C 52 Decim al 8 76 82 ▪ Change from l abel m ode to r eceipt m o de. ▪ The m emory sw itch setting is changed. BS M [Nam e] [Format] [Range] [Default] [Description] [Notes] [Ex a m ple ] Select devi c[...]

  • Page 89

    ZQ1 10 Rev . 1.00 - 89 - Mobile Printer Comman d Ma nu al BS M S PL PH fn2 m d1~dk [Nam e] [Format] [Range] [Default] [Description] Set S tart characters ASCII BS M S pL pH fn 2 m d1~dk Hex 08 4D 53 pL pH 32 m d1~dk Decimal 08 77 83 pL pH 50 m d1~dk 3 ≤ (pL+pHx256) ≤ 12 m = 49, 50, 51 32 ≤d ≤127, k ≤ 10 T rack 1 : “ST ART1 “ T rack 2 [...]

  • Page 90

    ZQ1 10 Rev . 1.00 - 90 - Mobile Printer Comman d Ma nu al Dynam ic se ntin el c har ac ter mode START characters (Max 10 byte ) Max DATA 76 characters (1Track data) END characters (Max 10 byte ) 0DH 0AH START characters (Max 10 byte ) Max DATA 37 characters (2Track data) END characters (Max 10 byte ) 0DH 0AH START characters (Max 10 byte ) Max DATA[...]

  • Page 91

    ZQ1 10 Rev . 1.00 - 91 - Mobile Printer Comman d Ma nu al US US i [Nam e] [Format] [Range] [Description] Get B/T configurat i on ASCII US US i n Hex 1F 1F 69 n Decimal 31 31 105 n n = 99, 1 15 , 100, 1 07 B/T conf i gurat io n det ails select by n va l ue as f ollo w s: n Function (Select information) 99 Connection mode 1 15 Encryption mode 100 Dev[...]

  • Page 92

    ZQ1 10 Rev . 1.00 - 92 - Mobile Printer Comman d Ma nu al US US p [Nam e] [Format] [Range] [Description ] Set B/T conf i gurat io n ASCII US US p n m p1~pk CR d1~dk CR Hex 1F 1F 70 n m p1~pk 0D d1~dk 0D Decimal 31 31 1 12 n m p1~pk 13 d1~dk 13 n = 48, 49 m = 48, 49, 50 p, d = Alp h anumeric ▪ B/T conf i gurat i on det ails n Encryption mode 48 Di[...]

  • Page 93

    ZQ1 10 Rev . 1.00 - 93 - Mobile Printer Comman d Ma nu al W LAN conf ig urat io n [Nam e] [Description] W LAN conf ig urat io n com m and ‘ S tart Message ’ i s necessary before sending c ommand via USB in t erfa ce. Start Message Value Dir ection Message 7 FH , 1DH, 1 FH, 0 3H Host → Printer Response 7 FH , 03H Printer → Host ▪ When send[...]

  • Page 94

    ZQ1 10 Rev . 1.00 - 94 - Mobile Printer Comman d Ma nu al ▪ Reference for requesting WALN conf i gurat ion Operation M essag e Value Size Remark Conn ect Reque st (Hos t → Printer) Syste m Reques t CMD("__ [I_F]__[SY S_REQ]") uns igned cha r[18] Check s um uns igned cha r[2] Conn ect Reque st (Printer → Hos t) Search Reques t CMD(&q[...]

  • Page 95

    ZQ1 10 Rev . 1.00 - 95 - Mobile Printer Comman d Ma nu al W EP Key_2 uns igned cha r[26] W EP Key_3 uns igned cha r[26] PSK Key uns igned cha r[64] Adho cchanne l uns igned cha r EAP Mode uns igned cha r 0:PEAP 1:TTLS 2:TLS 3:LEAP 4:FAST EAP ID uns igned cha r[32] EAP PASS W ORD uns igned cha r[32] Dummy uns igned cha r P2P_Pin_co de uns igned cha [...]

  • Page 96

    ZQ1 10 Rev . 1.00 - 96 - Mobile Printer Comman d Ma nu al ▪ Reference for setting W LAN conf i guration , Operation Mess age Value Size Remark Configura tion Set Value (Hos t → Printer) Configura tion Set Value CMD("__ [I_F]__[IF__ SET]") uns igned cha r[18] Syste m Na me uns igned cha r[ 64 ] Region uns igned cha r Netw orkMod e uns [...]

  • Page 97

    ZQ1 10 Rev . 1.00 - 97 - Mobile Printer Comman d Ma nu al P2P_Pin_co de uns igned cha r[9] Max 8bytes P2P_C hanne l uns igned cha r[3] 1,6,11 USER NAME uns igned cha r[32] Syste m ID USER PAS SWORD uns igned cha r[32] Syste m Passw ord PRINTER Port uns igned cha r[2] Dummy uns igned cha r Chan nel Search SysC ontact uns igned cha r[64] SysL ocation[...]