Ultimate Technology 600 POS manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Ultimate Technology 600 POS, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Ultimate Technology 600 POS one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Ultimate Technology 600 POS. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Ultimate Technology 600 POS should contain:
- informations concerning technical data of Ultimate Technology 600 POS
- name of the manufacturer and a year of construction of the Ultimate Technology 600 POS item
- rules of operation, control and maintenance of the Ultimate Technology 600 POS item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Ultimate Technology 600 POS alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Ultimate Technology 600 POS, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Ultimate Technology service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Ultimate Technology 600 POS.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Ultimate Technology 600 POS item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    SERIES 600 POS KEYBOARD PROGRAMMING & USER’S GUIDE[...]

  • Page 2

    Series 600 POS Keyboard ii TABLE OF CONTENTS SCOPE ............................................................................................................ 1 SPECIAL NOTE .............................................................................................. 1 PRODUCT INFORMATION ..........................................................[...]

  • Page 3

    Series 600 POS Keyboard iii MAINTENANCE ............................................................................................ 63 PRECAUTIONS ............................................................................................................. 63 CLEANING ................................................................................[...]

  • Page 4

    Series 600 POS Keyboard iv APPENDIX APPENDIX A SERIES 600 POS STANDARD KEYBOARD LAYOUTS A1 APPENDIX B KEYBOARD CABLE/CONNECTOR DAT A B1 APPENDIX C ASC11 CHARACTER SET C1 APPENDIX D 101/102 - KEY KEYBOARD KEY NUMBER TO SCAN CODE CROSS REFERENCE D1 LIST OF TABLES TABLE 1. SERIES 600 POS KEYBOARD - TYPICAL CONTROLS AND INDICATORS 8 TABLE 2. LOCAL MODE[...]

  • Page 5

    Series 600 POS Keyboard v FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE S TATEMENT • Reorient the radio or television receiving antenna • Relocate the keyboard with respect t o the receiver • Move the keyboard away from the receiver If necessary the user should consult the dealer or an experienced radio/television technician [...]

  • Page 6

    Series 600 POS Keyboard 1 SCOPE This user's guide provides t he information and procedures needed to install, operate and program your Series 600 POS Keyboard. Differences in models and optional features are described in this manual, where applicable. It is suggested that the entire manual be read before attemptin g installation or programming[...]

  • Page 7

    Series 600 POS Keyboard 2 Figure 1. Typical Point - of - Sale Station with Standard QWERTY Series 600 keyboard[...]

  • Page 8

    Series 600 POS Keyboard 3 PRODUCT INFORMATION MODEL DESCRIPTION Series 600 POS K eyboards are point - of - sale (POS) keyboards designed for use with a PC or ASCII terminal or network computer. These keyboards provide total flexibility in keyboard layout as well as extensive programming capability. The Series 600 Keyboard contains two bi - directio[...]

  • Page 9

    Series 600 POS Keyboard 4 BUILT - IN ANNUNCIATOR • Programmable • Selectable tone and duration BUILT - IN DIAGNOSTICS • Self test[...]

  • Page 10

    Series 600 POS Keyboard 5 SPECIFICATIONS DIMENSIONS (d x w x h) • Series 600 only – 7.85” x 14.7” x 2.97” • Series 600 w/MSR – 7.85” x 16.2” x 2.97” WEIGHT • Series 600 w/MSR - 3.95 pounds ELECTRICAL • 135 - 185mA at 5VDC (supplied from host) • 3 - volt lithium battery (battery backup for memory data retention when host s [...]

  • Page 11

    Series 600 POS Keyboard 6 INSTALLATION UNPACKING AND INSPECTION 1. Examine the exterior of th e shipping carton for signs of abuse or damage that may have occurred during transport. Report all evidence of damage or abuse to shipper and dealer. 2. Open top of shipping carton and carefully remove the keyboard and accessories. 3. Remove shipping retai[...]

  • Page 12

    Series 600 POS Keyboard 7 EXTERNAL CONNECTIONS As required by the hardware configuration, connect the keyboard to its host computer and other peripheral devices as shown in Figures 2 and 3. Note that the specific use for each connector on the keyboard is marked adjacent to each connector. Depending on the make and model of the user's equipmen [...]

  • Page 13

    Series 600 POS Keyboard 8 Main RS232 Port Aux RS232 Port Cash Drawer 1 (Driver) Port In Cash Drawer 1 (Driver) Port Out Cash Drawer 2 (Driver) Port In Cash Drawer 2 (Driver) Port Out Drawer Type Jumpers Main KB Port Aux KB Port Bar Code Scanner or Check Reader Receipt Printer Cash Drawer Port 1 & 2 Cash Drawer 1 Cash Drawer 2 PC or Terminal PS2[...]

  • Page 14

    Series 600 POS Keyboard 9 Figure 2. Typical Keyboard External Connections[...]

  • Page 15

    Series 600 POS Keyboard 10 ITEM DESCRIPTION Auxiliary Keyboard To attach auxiliary keyboard Main Keyboard Connection to PC or Termina l Jumpers Set jumpers to match printer Drawer 2 Status from drawer 2 Driver 2 Signal to open drawer 2 Drawer 1 Status from drawer 1 Driver 1 Signal to open drawer 1 Auxiliary RS232 Serial accessory ports for scanner,[...]

  • Page 16

    Series 600 POS Keyboard 11 OPERATION CONTROLS AND INDICATORS Operating controls and indicators on the Series 600 Standard QWERTY Keyboard are shown i n Figure 4 and described in Table 1. Because most Series 600 POS Keyboards are customized to match the user's needs, keyboard layouts and the function of the keys may vary from Figure 4. Although[...]

  • Page 17

    Series 600 POS Keyboard 12 Figure 4. Series 600 POS keyb oard - Typical Controls and Indicators Table 1. Series 600 POS Keyboard - Typical Controls and Indicators Index No. Name Function 1 through 3 Light Emitting Diode (LED) Indicators LED (1) SECURE - When on, indicates keyboard is secured( locked); when off, indicates keyboard is unlocked. LED ([...]

  • Page 18

    Series 600 POS Keyboard 13 PROGRAMMING PROGRAMMING KEYBOARD OPERATING PARAMETERS The operating parameters of the keyb oard can be configured (programmed) remotely from the host computer or locally at the keyboard. Keyboard programming in the remote mode sets the keyboard parameters as commanded by the host computer input applied at the main communi[...]

  • Page 19

    Series 600 POS Keyboard 14 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 00 01 Program Primary Key Functions (00) and Secondary Key Functions (01) NOTE The keys can be programmed to have primary and secondary levels of function. The primary function is activated when only the [...]

  • Page 20

    Series 600 POS Keyboard 15 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 02 Code Primary Key Functions to Secondary Key Positions 1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard numeric keypad, enter Function Code 02 . LED (2) turns on. 2. At the S[...]

  • Page 21

    Series 600 POS Keyboard 16 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 08 Enable/Disable Magnetic Stripe Reader (MSR) Tracks 1. Swipe Pro gram Card. While in programming mode, at the Series 600 Keyboard numeric keypad, enter Function Code 08 . LED (2) turns on. 2. At the Ser[...]

  • Page 22

    Series 600 POS Keyboard 17 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 10 11 12 13 Magnetic Stripe Reader (MSR) Track 1,3 Prefix (10) Field Separator (11) Suffix (12) Account Separator (13) 1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard numeric [...]

  • Page 23

    Series 600 POS Keyboard 18 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indicati on Remarks 17 18 Magnetic Stripe Reader (MSR) Track 1,3 Bad Read (17) Track 2 Bad Read Macro (18) 1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard numeric keypad, enter applicable Functi[...]

  • Page 24

    Series 600 POS Keyboard 19 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 20 or 30 Comm (RS232) Main Port 0 (20) AUX Port 1 (30) Baud Rate 1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard numeric keypad, enter Function Code 20 (Port 0) or 30 (Port 1)[...]

  • Page 25

    Series 600 POS Keyboard 20 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 22 or 32 Main Port 0 (22) AUX Port 1 (32) Parity 1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard n umeric keypad, enter Function Code 22 (Port 0) or 32 (Port 1). LED (2) turns[...]

  • Page 26

    Series 600 POS Keyboard 21 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 24 or 34 Main Port 0 (24) AUX Port 1 (34) Word Length 1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard numeric keypad, enter Function Code 24 (Port 0) or 34 (Port 1). LED (2) t[...]

  • Page 27

    Series 600 POS Keyboard 22 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 26 or 36 Comm (RS232) Main Port 0 (2 6) AUX Port 1 (36) Suffix 1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard numeric keypad, enter applicable Function Code 26 (Port 0) or 36[...]

  • Page 28

    Series 600 POS Keyboard 23 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 38 39 40 41 42 43 Keyswitch Position 1 MAKE (38) Keyswitch Position 1 BREAK (39) Keyswitch Position 2 MAKE (40) Keyswit ch Position 2 BREAK (41) Keyswitch Position 3 MAKE (42) Keyswitch Position 3 BREAK ([...]

  • Page 29

    Series 600 POS Keyboard 24[...]

  • Page 30

    Series 600 POS Keyboard 25 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 45 46 47 48 Drawer 1 Open (45) Closed (46) Drawer (2) Open (47) Closed (48) 1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard numeric keypad, enter applicable Function Code 45, [...]

  • Page 31

    Series 600 POS Keyboard 26 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 50 Disable Keys While Cash Drawer Open The Series 600 Keyboard can be programmed to become disabled wh ile 1 or more cash drawer(s) is open. 1. Swipe Program Card. While in programming mode, at the Series[...]

  • Page 32

    Series 600 POS Keyboard 27 Table 2. Local Mode Programming Inst ructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 71 Enable/Disable Keyboard Key Clicks (71) 1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard numeric keypad, enter Function Code 71 . LED (2 ) turns on. 2. At Series 600 Keyboa[...]

  • Page 33

    Series 600 POS Keyboard 28 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 84 85 Define Left ALTERNATE Key (84) and Right ALTERNATE Key (85) 1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard numeric keypad, enter Function Code 84 or 85 . LED (2) flashe[...]

  • Page 34

    Series 600 POS Keyboard 29 Table 2. Local Mode Programming Instructions * = Default Settings Function Code(s) Operation Normal Indication Remarks 96 Set Secure Mode 1. Swipe Program C ard. While in programming mode, at the Series 600 Keyboard numeric keypad, enter Function Code 96 . LED (2) turns on. 2. At Series 600 Keyboard numeric keypad, enter [...]

  • Page 35

    Series 600 POS Keyboard 30 L OCAL MODE PROGRAMMING KEY MAKE/BREAK CODES AND EXTENDED FUNCTIONS A summary of all keyboard parameters programmable in the local mode, assigned Function Codes and factory default settings is given in Table 3. Table 3. Local Mode programming Function Co des and Default Settings FUNCTION CODE PARAMETER DEFAULT SETTING (XX[...]

  • Page 36

    Series 600 POS Keyboard 31 Table 3. Local Mode programming Function Codes and Default Settings FUNCTION CODE PARAMETER DEFAULT SETTING (XXh = Hex Code in ASCII) REMARKS 12 MSR Track 1,3 Suffix ?<CR> (3Fh,ODh) for both format 1 and 3 Used to send suffixes after the magnetic card data. 13 MSR Track 3 Account Separator : ( 3Ah) for format 3 Used[...]

  • Page 37

    Series 600 POS Keyboard 32 FUNCTION CODE PARAMETER DEFAULT SETTING (XXh = Hex Code in ASCII) R EMARKS 30 RS232 Port 1 Baud Rate 9600 Baud Rate Used to select a baud rate for Port 1. Baud rates available are: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400 and 57600. 31 RS232 Port 1 Stop Bits 2 stop bits Used to select number of stop bits, 1 or 2, us[...]

  • Page 38

    Series 600 POS Keyboard 33 Table 3. Local Mode programming Function Codes and Default Settings FUNCTION CODE PARAMETER DEFAULT SETTING (XXh = Hex Code in ASCII) REMARKS 44 Keyswitch Polling User defined Allows the user to poll for keyswitch 1,2, or 3 MAKE/BREAK codes. Two options are available: 0 = unsolicited mode in which codes are sent whenever [...]

  • Page 39

    Series 600 POS Keyboard 34 Table 3. Local Mode programming Function C odes and Default Settings FUNCTION CODE PARAMETER DEFAULT SETTING (XXh = Hex Code in ASCII) REMARKS 82 Define Left Control Key Key 58 See illustration in Appendix D If auxiliary keyboard connected to the Series 600 Keyboard is other than a standard 101 or 102 - key keyboard, used[...]

  • Page 40

    Series 600 POS Keyboard 35 swiping the Programmer's card.[...]

  • Page 41

    Series 600 POS Keyboard 36 LOCAL MODE PROGRAMMING KEY MAKE/BREAK CODES AND EXTENDED FUNCTIONS There are two scan codes assigned to each key, one for when the key is depressed (MAKE code) and the other for when the key is released (BREAK code). Generally, all keys are programmed to output both MAKE and BREAK codes. The SHIFT, CONTROL and ALTERNATE k[...]

  • Page 42

    Series 600 POS Keyboard 37 EXAMPLE 1. This example sequence programs a “shift” key. 1. Place the Series 600 Keyboard in local programming mode by swiping Program Card. 2. At the Series 600 Keyboard numeric keypad, enter 00 or 01. 3. At the Series 600 Keyboard, press the key to be programmed. 4. At the auxiliary keyboard, press and hold the &quo[...]

  • Page 43

    Series 600 POS Keyboard 38 EXAMPLE 3 This example programs a Sec Op Key on the Series 600 Keyboard. 1. Place the Series 600 Keyboard in local programming mode by swiping Program Card. 2. At the S eries 600 Keyboard numeric keypad, enter 00. 3. At the Series 600 Keyboard, press the key to be programmed. 4. At the Series 600 Keyboard numeric keypad, [...]

  • Page 44

    Series 600 POS Keyboard 39 PROGRAMMING IN REMOTE MODE Programming in the remote mode requires the use of a supplemental program that is run on the host computer. If using an IBM PC or compatible computer as the host, use program supplied by Ultimate Technology Corporation when programming th e keyboard. To load and use the program, follow the instr[...]

  • Page 45

    Series 600 POS Keyboard 40 NOTE Always apply the COMMIT command (OP Code B4) after programming the keyboard remotely to save the changes in the NVRAM. Failure to use the COMMIT command after making programming changes will result in the loss of the changes the first time power is removed from the keyboard.[...]

  • Page 46

    Series 600 POS Keyboard 41 Table 5. Remote Programming Mode Commands OP CODE (HEX) MNEMONIC/DESCRIP TION COMMAND/ACKNOWLEDGEMENT A0 MACROK Download all key macros for Series 600 Keyboard. Refer to Table 6 for further explanation. COMMAND: A0krcCxDx.......<CR> A0 = Op Code k = P to program Primary key = S to program Secondary key Missing means[...]

  • Page 47

    Series 600 POS Keyboard 42 Table 5. Remote Programming Mode Commands OP CODE (HEX) MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT A1 MACROP Download macros for prefix/suffix. COMMAND: A1aCxDx.......<CR> A1 = Op Code a = macro to load in ASCII range A - Z listed below Cx = key number (refer t o Appendix D) Dx = key number (refer to Appendix D) &[...]

  • Page 48

    Series 600 POS Keyboard 43 Table 5. Remote Programming Mode Commands OP CODE (HEX) MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMEN T A2 SNDDLY Determines rate of delay in milliseconds for sending macros. This command used when interfacing with slow systems. COMMAND: A2CxDx<CR> A2 = Op Code Cx = hex value for low nibble Dx = hex value for high nib[...]

  • Page 49

    Series 600 POS Keyboard 44 Table 5. Remote Programming Mode Com mands OP CODE (HEX) MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT A4 NOTES Used to enter up to 40 characters of notes into RAM. Useful for recording keyboard version and date, etc. COMMAND: A4xxxx - xxxx<CR> A4 = Op Code xx = Note (max of 40 Characters) <CR> = terminate comm[...]

  • Page 50

    Series 600 POS Keyboard 45 Table 5. Remote Programming Mode Commands OP CODE (HEX) MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT A7 NVBDRD Read a database register. COMMAND: A7h hhm<CR> A7 = Op Code hhh = 3 character address representing the register to read range "000" to "7FF" in ASCII m = mode to read in 0 = string mode [...]

  • Page 51

    Series 600 POS Keyboard 46 Table 5. Remote Programming Mode Commands OP CODE (HEX) MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT AD RAWED Puts keyboard in ro w and column mode used for diagnostics. COMMAND: ADx<CR> AD = Op Code x 0 = user codes 1 = row and column <CR> = terminate command (0D hex) ACKNOWLEDGEMENT: NONE AE SECURE Used to l[...]

  • Page 52

    Series 600 POS Keyboard 47 Table 5. Remote Programming Mode Commands OP CODE (HEX) MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT B0 LIGHT Provides on/off control for keyboard light emitting diode (LED) indicators. PC mode for NUM and CAP Lock lights is default. COMMAND: B0Lx<CR> B0 = Op Code L = lamp x = on/off <CR> = terminate command ([...]

  • Page 53

    Series 600 POS Keyboard 48 Table 5. Remote Programming Mode Commands OP CODE (HEX) MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT B1 BEEPON Controls pitch and duration of beep. If valued for pitch (p) and duration (d) omitted when command activated. COMMAND: B1pd<CR> B1 = Op Code p = pitch in Hz d = duration in milliseconds <CR> = termina[...]

  • Page 54

    Series 600 POS Keyboard 49 Table 5. Remote Programming Mode Commands OP CODE (HEX) MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT B3 RDE RROR Sends all error information to main port for output. COMMAND: B3<CR> B3 = Op Code <CR> = terminate command (0D hex) Sends all error log information contained in the non - volatile memory (NVRAM) out[...]

  • Page 55

    Series 600 POS Keyboard 50 Table 5. Remote Programming Mode Commands OP CODE (HEX) MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT B7 KSSTATUS Send keyswitch MAKE/BREAK codes in current keyswitch 1, 2 or 3 position. COMMAND: B7<CR> B7 = Op Code <CR> = terminate command (0D hex) ACKNOWLEDGEMENT: NONE B8 MSRSND Use to send magnetic card read[...]

  • Page 56

    Series 600 POS Keyboard 51 Table 5. Remote Programming Mode Commands OP CODE (HEX) MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT BA BEEPRD Selects magnetic card read annunciation mode. COMMAND: BAp<C R> BA = Op Code p = annunciation mode select <CR> = terminate command (0D hex) Annunciation selection: A = beep on good read B = beep on ba[...]

  • Page 57

    Series 600 POS Keyboard 52 Table 5. Remote Programming Mode Commands OP CODE (HEX) MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT BC CDSTATUS Send cash drawer macros for open and closed dra wer. COMMAND: BCp<CR> BC = Op Code p = selection control <CR> = terminate command (0D hex) Selection control: A = cash drawer 1 macros B = cash drawer[...]

  • Page 58

    Series 600 POS Keyboard 53 Table 5. Remote Programming Mode Commands OP CODE (HEX) MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT BE VERSION Sends software version, engineering number, and keyboard type parameters. COMMAND: BE<CR> BE = Op Code <CR> = terminate command (0D hex) ACKNOWLEDGEMENT: BEnnnnnvvvvkkkkx - x<CR> BE = Op Code n[...]

  • Page 59

    Series 600 POS Keyboard 54 REMOTE PROGRAMMING KEY MAKE/BREAK CODES There are two scan codes assigned to each key, one for when the key is depressed (MAKE code) and the other for when the key is released (BREAK code). Generally, all keys are programmed to output both MAKE and BREAK codes. The SHIFT, CONTROL and ALTERNATE keys are always programmed t[...]

  • Page 60

    Series 600 POS Keyboard 55 EXAMPLES OF REMOTE PROGRAMMING FOR KEY MAKE/BREAK CODE EXAMPLE 1. This example programs a key located at the top left - hand corner of the keyboard (row 1, column A) as a primary key that outputs the scan code fo r lowercase "z" on MAKE and BREAK. 1. Use the data in Appendix D to find the key code number for the[...]

  • Page 61

    Series 600 POS Keyboard 56 EXAMPLE 3. This example programs the key at top left - hand corner of keyboard (row 1, column A) as a primary key that outputs the scan code for lowercase "z" on MAKE only. 1. Use the data in Appendix D to find the key code number for the "Z" key on the 101/102 - keyboard. The "Z" key code nu[...]

  • Page 62

    Series 600 POS Keyboard 57 EXAMPLE 6. This example progr ams key at top left - hand corner of keyboard (row 1, column A) as a primary key that outputs the string "abCd" for MAKE. 1. Use the data in Appendix D to find the key code numbers for the A, B, C and D keys on the 101/102 - keyboard. The key code numbers f or the A, B, C and D keys[...]

  • Page 63

    Series 600 POS Keyboard 58 OPOS PROGRAMMING The OPOS keys are defined in Table 7 below. All OPOS keys have the pref ix of E0h/48h added to them. Example for OPOS key #32: The output in scan set 2 is E0 48 33 F0 33. All data is sent on the make of the key. Note: See Appendix D for keyboard key number format and scan code cross reference. Table 7 OPO[...]

  • Page 64

    Series 600 POS Keyboard 59 MSR PROGRAMMING FOR UTC OPOS DRIVERS The MSR is programmed by using a special prefix. This prefix allows the OPOS driver to determine where the data is coming from. An example of the data stream is shown below. If a track is missing from the magnetic stripe card, the prefix and suffix for that track will still be sent. MS[...]

  • Page 65

    Series 600 POS Keyboard 60 Table 8 MSR Programming for UTC OPOS Drivers Function Code (s) Operation Track 2 16 (suffix) 1. Swipe Program Card. While in programming mo de, at the Series 600 Keyboard, enter Function Code 16 (suffix). 2. At the auxiliary keyboard, type ?<CR>. 3. At the Series 600 Keyboard, press ENTER . Track 2 18 (bad read) 1. [...]

  • Page 66

    Series 600 POS Keyboard 61 COPYING KEYBOARD SETUP DATA (CLONING) Once a keyboard has been programmed, the parameters can be copied fro m the source keyboard to other keyboards. This feature saves time and reduces errors when programming more than one keyboard. It is also useful for remote keyboard setup and when making changes in key codes. Downloa[...]

  • Page 67

    Series 600 POS Keyboard 62 2. At the source keyboard, swipe the Program Card in the magnetic stripe reader (MSR). For keyboards equipped with an optional keyswitch adjacent to the LED indicators, s et the switch to the AUX position, then enter 882 at the numeric keypad. 3. All LED indicators turn on and the keyboard enunciator beeps three times. 4.[...]

  • Page 68

    Series 600 POS Keyboard 63 MAINTENANCE The Series 600 POS Keyboard requires minimal routine maintenance. However, reasonable care of the keyboard will extend its life. The followi ng precautions and routine maintenance actions are recommended. PRECAUTIONS • Do not drop keyboard or allow it to be subjected to impact. • Keep liquids away from key[...]

  • Page 69

    Series 600 POS Keyboard 64 KEY LEGEND CHANGE 3/4 INCH FULL TRAVEL KEYBOARDS The key legends for full travel keyboards can be changed by one of two methods depending on the type of keys installe d on the keyboard. For keys with legends permanently printed on the keys, the entire keycap can be changed by placing a flat head screwdriver under the exis[...]

  • Page 70

    Series 600 POS Keyboard 65 1. Disconnect keyboard from system. 2. Turn keyboard ov er to gain access to 7 screws that secure the base of the keyboard case to the top. Remove the 7 screws. 3. Turn keyboard upright. Gain access to the battery by lifting the top portion of the keyboard assembly from the base and placing it and the attached extended ca[...]

  • Page 71

    Series 600 POS Keyboard A 1 APPENDIX A SERIES 600 POS STANDARD KEYBOARD LAYOUTS QWERTY #1 Default Layout QWERTY #2 Default Layout[...]

  • Page 72

    Series 600 POS Keyboard A 2 APPENDIX A SERIES 600 POS STANDARD KEYBOARD LAYOUTS Full Matrix Default Layout[...]

  • Page 73

    Series 600 POS Keyboard B 1 APPENDIX B KEYBOARD CABLE/CONNECTOR DATA BACK CONNECTOR PIN OUTS MAIN RS232 DB9 FEMALE 1 N/C 2 TXD OUT 3 RXD IN 4 N/C 5 GRD 6 N/C 7 CTS IN 8 RTS OUT 9 +5 VDC IN/OUT AUX RS232 DB9 MALE 1 N/C 2 RXD IN 3 TXD OUT 4 N/C 5 GND 6 N/C 7 RTS OUT 8 CTS IN 9 +5 VDC IN/OUT KEYBOARD MAIN 1 DATA 2 N/C 3 GND 4 +5 VDC IN/OUT 5 CLOCK 6 N[...]

  • Page 74

    Series 600 POS Keyboard C 1 APPENDIX C ASCII CHARACTER SET 00 Ctrl - @ (NUL) 30 0 60 ‘ 01 Ctrl - A (SOH) 31 1 61 a 02 Ctrl - B (STX) 32 2 62 b 03 Ctrl - C (ETX) 33 3 63 c 04 Ctrl - D (EOT) 34 4 64 d 05 Ctrl - E (ENQ) 35 5 65 e 06 Ctrl - F (ACK) 36 6 66 f 07 Ctrl - G (BEL) 37 7 67 g 08 Ctrl - H (BS) 38 8 68 h 09 Ctrl - I (HT) 39 9 69 i 0A Ctrl - J[...]

  • Page 75

    Series 600 POS Keyboard D 1 APPENDIX D 101/102 - KEY KEYBOARD KEY NUMBER TO SCAN CODE CROSS REFERENCE 102 - Key Keyboard Key Number Position Layout KEY NUMBER (Decimal) KEY NUMBER (Hexadecimal) LEGEND SCAN CODE SET 1 SET 2 SET 3 1 01 ` 29/A9 0E/F0 0E 0E/F0 0E 2 02 1 02/82 16/F0 16 16/F0 16 3 03 2 03/83 1E/F0 1E 1E/F0 1E 4 04 3 04/84 26/F0 26 26/F0 [...]

  • Page 76

    Series 600 POS Keyboard D 2 KEY NUMBER (Decimal) KEY NUMBER (Hexadecimal) LEGEND SCAN CODE SET 1 SET 2 SET 3 13 0 D = 0D/8D 55/F0 55 55/F0 55 15 0F Backspace 0E/8E 66/F0 66 66/F0 66 16 10 Tab 0F/8F 0D/F0 0D 0D/F0 0D 17 11 Q 10/90 15/F0 15 15/F0 15 18 12 W 11/91 1D/F0 1D 1D/F0 1D 19 13 E 12/92 24/F0 24 24/F0 24 20 14 R 13/93 2D/F0 2D 2D/F0 2D 21 15 [...]

  • Page 77

    Series 600 POS Keyboard D 3 KEY NUMBER (Decimal) KEY NUMBER (Hexadecim al) LEGEND SCAN CODE SET 1 SET 2 SET 3 35 23 G 22/A2 34/F0 34 34/F0 34 36 24 H 23/A3 33/F0 33 33/F0 33 37 25 J 24/A4 3B/F0 3B 3B/F0 3B 38 26 K 25/A5 42/F0 42 42/F0 42 39 27 L 26/A6 4B/F0 4B 4B/F0 4B 40 28 ; 27/A7 4C/F0 4C 4C/F0 4C 41 29 ' 28/ A8 52/F0 52 52/F0 52 42 2A No K[...]

  • Page 78

    Series 600 POS Keyboard D 4 KEY NUMBER (Decimal) KEY NUMBER (Hexadecimal) LEGEND SCAN CODE SET 1 SET 2 SET 3 60 3C Left Alternate 38/B8 11/F0 11 19/F0 19 61 3D Space bar 39/B9 29/F0 29 29/F0 29 62 3E Right Alternate E0 38/E0 B8 E0 11/E0 F0 11 39/F0 39 64 40 Right Control E0 1D/E0 9D E0 14/E0 F0 14 58/F0 58 75 4B Insert E0 52/E0 D2 E0 70/E0 F0 70 67[...]

  • Page 79

    Series 600 POS Keyboard D 5 KEY NUMBER (Decimal) KEY NUMBER (Hexadecimal) LEGEND SCAN CODE SET 1 SET 2 SET 3 96 60 Keypad - 48/C8 75/F0 75 75/F0 75 97 61 Keypad 5 4C/CC 73/F0 73 73/F0 73 98 62 Keypad ¯ 50/D0 72/F0 72 72/F0 72 99 63 Keypad Insert 52/D2 70/F0 70 70/F0 70 100 64 Keypad * 37/B7 7C/F0 7C 7E/F0 7E 101 65 Keypad PgUp 49/C9 7D/F0 7D 7D/F0[...]

  • Page 80

    Series 600 POS Keyboard D 6 KEY NUMBER (Decimal) KEY NUMBER (Hexadecimal) LEGEND SCAN CODE SET 1 SET 2 SET 3 124 7C Print/SysRq E0 2A/E0 37 E0 B7/E0 AA E0 12 E0 7C/E0 F0 7C E0 F0 12 57/F0 57 125 7D Scroll Lock 46/C6 7E/F0 7E 5F/F0 5F 126 7E Pause/Break E1 1D/45 E1/ 9D C5 E1 14 77 E1 F0 14 F0 77 62/F0 62[...]

  • Page 81

    ULTIMATE TECHNOLOGY CORPORATION 100 Rawson Road VICTOR, NEW YORK 14564 Printed in U.S.A. 10756016 REV B 1/03[...]