Toshiba Satellite L730/735 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Toshiba Satellite L730/735, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Toshiba Satellite L730/735 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Toshiba Satellite L730/735. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Toshiba Satellite L730/735 should contain:
- informations concerning technical data of Toshiba Satellite L730/735
- name of the manufacturer and a year of construction of the Toshiba Satellite L730/735 item
- rules of operation, control and maintenance of the Toshiba Satellite L730/735 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Toshiba Satellite L730/735 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Toshiba Satellite L730/735, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Toshiba service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Toshiba Satellite L730/735.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Toshiba Satellite L730/735 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    User ’ s Manual Satellite L730/L735 Satellite Pro L730 Series[...]

  • Page 2

    User ’s Manual ii T able of Contents Copyright..................... .............. .............. .............. .............. .............. ........ v Disclaimer ............. .............. .............. .............. ................. .............. ........... v T r ademarks ........... .............. .............. .............. .......[...]

  • Page 3

    User ’s Manual iii Chapter 3 Operating Basics Using the T ouch Pad ............. .............. ................. .............. .............. ..... 3-1 The Keyboard ................. .............. .............. .............. .............. ................ 3-2 Optical disc drives.......................... .............. .............. ......[...]

  • Page 4

    User ’s Manual iv Chapter 6 T roubleshooting Problem solving process ............... .............. ................ .............. ........... 6-1 Hardware and system checklist ............... .............. ................. ............. 6-4 TOSHIBA sup port ..................... ................. .............. .............. .............. 6[...]

  • Page 5

    User ’s Manual v Copyright © 201 1 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No p at ent liability is assumed, with respect to the use of the information contained herein. First edition January 201 1 Copyright authority for [...]

  • Page 6

    User ’s Manual vi Memory S tick and Memory Stick PRO are trademarks or registered trademarks of Sony Corporatio n. MultiMediaCard and MMC are tradema rks of Mu ltiMediaCard Association. Labelflash is a trademark of Y AMAHA CORPORA TION. WinDVD and Corel Digital S tudio are trademarks or registered trademarks of Corel Corporations. Atheros is a re[...]

  • Page 7

    User ’s Manual vii the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired opera tion. Cont act EU Declar atio n of Confor mity CE comp liance This product is labelled with the CE Mark in accordance with the related Europ[...]

  • Page 8

    User ’s Manual viii light industry environments”. TOSHIB A do not approve the use of this product in working environmen ts other than the above menti oned “Residential, commercial and light industry environments”. For example, the fol lowing environments are not a pproved: ■ Industrial Environments (e.g. environmen ts where a mains voltag[...]

  • Page 9

    User ’s Manual ix This Class B digital apparatus meets all require ments of the Canadian Interference-Causng Equipment Regulation s. Cet appareil numérique de la class B respecte toutes les exgences du Règlement sur le matériel brouileur du Cana da. Following information is only valid for EU-mem ber S t ates: Disposal of product s Disposal of [...]

  • Page 10

    User ’s Manual x Disposing of the computer and the computer's batteries ■ Discard this compu ter in acco rdance with appli cable laws and regulations. For further information, cont act y our local government. ■ This computer contains rechargeable batteries. After repeated use, the batteries will finally lose th eir ability to hold a char[...]

  • Page 11

    User ’s Manual xi Optical disc drive safety instructions 1. Panasonic System Networks ■ DVD SuperMulti with Double Layer Recording UJ8A0 ■ BD-Writer UJ240 2. HIT ACHI-LG Data Storage ■ BD-Combo CT 31F Be sure to check the precautions at the en d of this section. ■ The drive model employs a laser system. T o ensure proper use of this produ[...]

  • Page 12

    User ’s Manual xii Precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT .” T o use this model properly , rea d the instruction manual carefully and keep this manual for your future refe rence. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.[...]

  • Page 13

    User ’s Manual xiii Preface Congratulations on your purchase of th is computer . This powerful notebook computer provides excellent expans ion capability , includes multime dia functionality , and is designed to prov ide years of reliable, high-pe rformance computing. This manual tells how to set up and begin using your computer . It also provide[...]

  • Page 14

    User ’s Manual xiv Display Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified a s shown below . T erminology This term is defined in this document as follows: S ABC Names of windows or icons or text generated by the computer that appear on its display screen are presented[...]

  • Page 15

    User ’s Manual xv General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho wever, cert ain precautions should be observed to further reduce the risk of personal injury or damag e to the computer . Be certain to read the general precau tions below and to note the cautions [...]

  • Page 16

    User ’s Manual xvi S tress injury Carefully read the Instruction Manual fo r Safety and Comfor t . It contains information on the prevention of stre ss injuries to your hands and wrists that can be caused by exte nsive keyboar d use. It also in cludes information on work space design, posture and lighting that can help reduce physical stress. Hea[...]

  • Page 17

    User ’s Manual 1-1 Chapter 1 C h a p t e r 1 Getting S t arted This chapter provides an equ ipment checklist, and basic informa tion to start using your computer . Equipment checklist Carefully unpack your comp uter , taking ca re to save the box and packaging materials for future use. Hardware Check to make sure you have al l the following items[...]

  • Page 18

    User ’s Manual 1-2 ■ WinDVD BD for TOSHIBA ■ TOSHIBA Resolution+ Plug-in For Windows Media Player ■ Corel Digital S tudio ■ Corel Label@Once ■ TOSHIBA eco Utility ■ TOSHIBA Bulletin Board ■ TOSHIBA ReelT ime ■ TOSHIBA HW Setup Utility ■ TOSHIBA V alue Added Package ■ TOSHIBA Intelligent D isplay Management ■ TOSHIBA Web Came[...]

  • Page 19

    User ’s Manual 1-3 Connecting the A C adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power . The AC adaptor can automa tically adjust to any voltage ranging fro[...]

  • Page 20

    User ’s Manual 1-4 1. Connect the powe r cord to the AC adaptor . Figure 1-1 Connecting the power cord to the AC adap tor (2-pin plug) Figure 1-2 Connecting the power cord to the AC adap tor (3-pin plug) 2. Connect the AC adaptor ’s DC output plug to the DC IN 19V jack on the left of the computer . ■ Never place your computer or AC adaptor on[...]

  • Page 21

    User ’s Manual 1-5 Figure 1-3 Connecting the DC output plug to the computer 3. Plug the power cord into a live wall outle t - the Battery and DC IN indicators on the front of the computer should glow . Opening the disp lay The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand[...]

  • Page 22

    User ’s Manual 1-6 T urning on the power This section describes how to turn on the power - the Power indicator wil l then indicate the status. Please refer to the Monitoring of power condition section in Chapter 5, Power and Powe r-Up Modes fo r more information. 1. Open the display panel. 2. Press and hold the computer's power button for tw[...]

  • Page 23

    User ’s Manual 1-7 St arting up for the first time The Windows 7 S tartup Screen will be the first screen displayed when you turn on the power . Fo llow the on-screen instructions on each screen in order to properly inst all the operating system. T urning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibe[...]

  • Page 24

    User ’s Manual 1-8 Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous workin g environment more ra pidly than does the Hibernation Mode feature. ■ Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Sleep Mode [...]

  • Page 25

    User ’s Manual 1-9 Y ou can enter Sleep Mode in one of th ree ways: ■ Click Start , po int to the arrow icon ( ) and then select Sleep from the menu. ■ Close the display panel. Please note that this feature must be enabl ed within the Power Options (to access it, click St art -> Control Panel -> System and Security -> Powe r Options [...]

  • Page 26

    User ’s Manual 1-10 ■ Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Hibernate feature. ■ Allows the use of the panel power off feature. S tarting Hibernation Mode T o enter Hibernation Mode, follow the steps below . 1. Click Start . 2. Point to the arrow ic[...]

  • Page 27

    User ’s Manual 1-1 1 achieved: ■ Click Start , po int to the arrow icon ( ) and then select Restart from the menu. ■ Press CTRL , AL T and DEL simultaneously (once) to display the menu window , th en select Restart from the Shut down optio ns . ■ Press the power button and hold it do wn for five seconds. Once the computer has turned itself [...]

  • Page 28

    User ’s Manual 2-1 Chapter 2 C h a p t e r 2 The Grand T our This chapter identifies the vari ous components of the computer - it is recommended that you become familiar with each before you operate th e computer . Front with the display closed The following figure shows the computer ’s front with it s display panel in the closed position. Figu[...]

  • Page 29

    User ’s Manual 2-2 Lef t side The following figure shows the comp uter ’s left side. Figure 2-2 The left side of the computer DC IN indicator The DC IN indicator normally glows white when power is being correctly supplied from the AC power adaptor . However , if the output voltage from the adaptor is abnormal, or if the computer's power su[...]

  • Page 30

    User ’s Manual 2-3 Right side The following figure shows the comp uter ’s right side. Figure 2-3 The right side of the computer *Provided with some models. Product appearance depends on the model yo u purchased. DC IN 19V j ack The AC adaptor connects to this jack in order to power the computer and charge its internal batteries. Please note tha[...]

  • Page 31

    User ’s Manual 2-4 The integrated sound system provides support for the comp uter 's internal speakers and microphone, as well as allowin g an external microphone and headphones to be connected via the appropriate jacks. Universal Serial Bus (USB 2.0 or 3.0) port One Universal Serial Bus port, which complies to the USB 2.0 or 3.0 standard, i[...]

  • Page 32

    User ’s Manual 2-5 Back The following figure shows the comp uter ’s back. Figure 2-4 The back of the computer Do not block the cooling vents. Keep fo reign metal objects, such as screws, staples and paper clips, out of the co oli ng vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in s[...]

  • Page 33

    User ’s Manual 2-6 Underside The following figure shows the undersi de of the computer . Y ou shou ld ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage. Figure 2-5 The underside of the computer For more information regarding Batter y Life, please refer to the Legal Footnotes section in Appendix C. [...]

  • Page 34

    User ’s Manual 2-7 Product appearance depends on the model yo u purchased. Front with the display op en This section shows the computer with the display panel open. In order to open the display , lift the display panel up and position it at a comfortable viewing angle for you. Battery lock Slide the battery lock to release the battery pack ready [...]

  • Page 35

    User ’s Manual 2-8 Figure 2-6 The front of the computer with th e display panel open * Provided with some models. Product appearance depends on the model yo u purchased. 1. Wireless LAN and Wireless W AN/WiMAX antennas (not shown)* 8. S tereo speakers 2. Microphone* 9. Keyboard 3. Web Camera LED* 10. T ouch Pad ON/OFF button 4. Web Camera* 1 1. T[...]

  • Page 36

    User ’s Manual 2-9 Wireless W AN/WiMAX antennas Some computers i n this series are e quipped with the Wireless WAN/WiMAX antennas. Microphone A built-in microphone allows you to import and record sounds for your app lication - please refer to the Sound System section in Ch apt er 3, Operating Basics for more information. Web Camera LED The Web Ca[...]

  • Page 37

    User ’s Manual 2-10 Internal Hardware Component s This section describes the internal hardw are components of your computer . The actual specifications ma y vary depending on the model you purchased. Power button Press this button to turn the computer's power on and off. Display hing es The display hinges allow the displ ay panel to be posit[...]

  • Page 38

    User ’s Manual 2-1 1 CPU The processor type varies d epending on model . T o check which type of pro cessor is included in your model, open the TOSHIBA PC Diag nostic T ool Utility by clicking St art -> All Programs -> TOSHIBA -> Utilities -> PC Diagno stic T ool . Legal Footnote (CPU) For more information regardi ng CPU, please refer[...]

  • Page 39

    User ’s Manual 2-12 Intel ® Display Power S aving T echnology Intel GPU model may include the Displa y Power Saving T echnology feature that can save the computer's power co nsumption by opti mizing picture contrast on the internal L CD. This feature can be used if the computer is: RTC battery The internal R TC battery backs up the Real Tim[...]

  • Page 40

    User ’s Manual 2-13 ■ running under battery mo de ■ using the internal LCD display only The Display Power Saving T echnology feature can be en abled in the Intel ® Graphics and Media Control Panel. Y ou can a ccess this control panel in o ne of the following ways: ■ Click St art -> Control P anel . Select Larg e icons or Small icons in [...]

  • Page 41

    User ’s Manual 3-1 Chapter 3 C h a p t e r 3 Operating Basics This chapter describes the basic operations of your computer , highlights the precautions that should be taken when using it. Using the T ouch Pad T o use the T ouch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go. Figure 3-1 T [...]

  • Page 42

    User ’s Manual 3-2 T ouch pad gesture Please refer to the touch pad settings in mouse properties. The Keyboard The computer ’s keyboard layouts ar e compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhance d keyboard functions can be performed on the computer . The number of keys ava[...]

  • Page 43

    User ’s Manual 3-3 Figure 3-2 CAPS LOCK indicator Function keys: F1 … F12 The function keys (not to be confused with the special FN key) are the twelve keys at the top of your key board - these keys function differentl y from other keys. F1 through F12 are called functi on keys because they execute programmed functions when pressed and, when us[...]

  • Page 44

    User ’s Manual 3-4 ■ Press FN + F10 or FN + F1 1 to access the com puter's integrated keypad. When activated, the keys with grey marki ngs on their bottom edge become either numeric keypad keys ( FN + F1 1 ) or cursor control keys ( FN + F10 ). ■ Press FN + F12 ( ScrLock ) to lock the curso r on a specific line . The power on default is [...]

  • Page 45

    User ’s Manual 3-5 ■ Mute Pressing FN + ESC turns the sound on and off. ■ Lock Pressing FN + F1 enters ''Lock computer mode' '. T o restore your desktop, you need to log on again . ■ Power Plan Pressing FN + F2 changes the power settings. ■ Sleep Pressing FN + F3 switches the system to Sleep Mode. ■ Hibernate Pressin[...]

  • Page 46

    User ’s Manual 3-6 Pressing FN + 4 increases the volu me in increment. FN S ticky key Y ou can use the TOSHIBA Accessibility Ut ility to make the FN key sticky , that is, you can press it once, release it, and then press an "F Number" key . T o start the T OSHIBA Accessibility utility , click St art -> All Programs -> TOSHIBA ->[...]

  • Page 47

    User ’s Manual 3-7 functions without having to turn the overlay off: 1. Hold down FN key and press any other key - this key will operate as if the overlay were off. 2. T ype upper-case characters by holding down FN + SHIFT and pressing a character ke y . 3. Release FN key to continue using the selected overlay function. T emporarily using overlay[...]

  • Page 48

    User ’s Manual 3-8 Mode 1/Mode 2, CD-ROM XA Mode 2 (Form1 , Form2), Enhanced CD (CD- EXTRA), Addressing Method 2, DVD-R, DVD-RW , DVD+R, DVD+RW , DVD-RAM, DVD-R DL (Format1), DVD+R D L. BD-Combo drive In addition to the above forma ts, BD-Combo drive supports BD-ROM and BD DL. BD-Writer drive In addition to the ab ove formats, BD-Writer drive sup[...]

  • Page 49

    User ’s Manual 3-9 Figure 3-4 Inserting a disc 4. Press gently at the cente r of the disc until you feel it click into place. The disc should li e below the top of the spindle, flu sh with the spindl e base. 5. Push the center of the disc tray to close it. P ress gently until it locks into place. Removing discs T o remove the disc, follow the ste[...]

  • Page 50

    User ’s Manual 3-10 1. T o pop the d isc tray partially open, press the eject button. Gently pull the disc tray out until it is fully opened. 2. The disc extends sli ghtly over the sides of the disc tray so you can grasp it. Gent ly lift out the disc. 3. Push the center of the disc tray to close it. P ress gently until it locks into place. How to[...]

  • Page 51

    User ’s Manual 3-1 1 CDs ■ CD-R discs can be written only once. The recorded data cannot be erased or changed. ■ CD-RW discs including multi speed CD-RW discs, high-speed CD-RW discs and ultra-speed CD-RW discs can be recorded more than once. DVDs ■ DVD-R, DVD+R, DVD-R DL and DVD+R DL discs can be written only once. The recorded data cannot[...]

  • Page 52

    User ’s Manual 3-12 ■ Damage to a ny disc that may be caused by writing or rewriting with this product. ■ Any change or loss of the recorded contents of media that may be caused by writing or rewriting with this product, or for any business profit loss or business interruption t hat may be cause d by the change or loss of the recorded content[...]

  • Page 53

    User ’s Manual 3-13 When writing or rewriting Please observe the fo llowing points while you w rite or rewrite da ta to a media: ■ Always copy data from the hard disk drive to the optical media - do not use the cut-and-paste function as the or iginal data will be lost if there is a write error . ■ Do not perform any of the following actions: [...]

  • Page 54

    User ’s Manual 3-14 ■ Install, remove or connect external devices, including such items as a memory media card, USB device, external moni tor or an optical digital device. ■ Use the audio/video control button to reproduce music or voice. ■ Open the optica l disc drive. ■ Do not use shut down, log off, Sleep Mode or Hibernation Mode functi[...]

  • Page 55

    User ’s Manual 3-15 ■ If you add data to a DVD-R, DVD-R DL, DVD+R or DVD+R DL d isc that you have already recorded to, you might not be able to read the ad ded data under some circumstances. Fo r example, it cannot be read under 16-bit operating systems, such as Windows 98SE and Windows Me, while in Windows NT4 you will need Se rvice Pack 6 or [...]

  • Page 56

    User ’s Manual 3-16 How to make a Labelflash DVD Simplified steps for making a Labelflash DVD: 1. Insert a Labelflash disc in optica l disc drive. 2. Click St art -> All Programs -> Corel Digital S tudio for T OSHIBA -> Corel Digit al Studio for T OSHIBA -> Create 3. Click Create Disc Labe l . How to make a DVD-V ideo or a Blu-ray Dis[...]

  • Page 57

    User ’s Manual 3-17 ■ Do not operate Corel Digital S tudio immediately after turning on the computer . Pl ease wait until all Disc Drive activity has stopped. ■ CD recorder , DVD-Audio, Video CD f unctions a re not supported in this version. ■ Do not run software like a screen saver because it can put a heavy lo ad on the CPU. ■ Do not su[...]

  • Page 58

    User ’s Manual 3-18 Notes on use ■ This software can only be used on Windows 7. ■ TOSHIBA VIDEO PLA YER software is supported for playback of DVD- Video and DVD-VR. ■ Frame dropping, audio skipping or out of sync aud io and video may occur during playback of some DVD-Video titles. ■ Close all other applica tions when using th e TOSHIBA VI[...]

  • Page 59

    User ’s Manual 3-19 ■ Do not change Windows Users while TOSHIBA VIDEO PLA YER is running. ■ For some DVD-Video discs, using the control window to change the audio track will al so change the subti tle track. ■ If you see the screen blinking while playing DVD with subtitle on at Media Player , please use TOSHIBA VIDEO PLA YER or Media Center[...]

  • Page 60

    User ’s Manual 3-20 section as regard to potential copy right infringement and confirm you have any necessary authorization . ■ The “TOSHIBA VIDEO PLA YER” is intended for pl aying DVD-Video, DVD-VR and video files and for vie wing 2D home video content in 3D. The 3D playback of any video content not created by the user may require the perm[...]

  • Page 61

    User ’s Manual 3-21 St arting TOSHIBA VIDEO PLA YER Use the following procedure to start T OSHIBA VIDEO PLA YER. 1. Insert an DVD-Video in the DVD/BD d rive while Windows ® 7 is running. When a DVD-Video disc is set in the BD drive (for models with BD- Writer drive or BD-Combo drive) , TOSHIBA VIDEO PLA YER starts automati cally . When an DVD-Vi[...]

  • Page 62

    User ’s Manual 3-22 ■ Because Blu-ray Disc playback operates according to programs built into the content, operati on methods, operation scre ens, sound effects, icons and other features may vary from disc to disc. For more information on these items refer to in structions in cluded with content or contact the content manufacturers directly . ?[...]

  • Page 63

    User ’s Manual 3-23 Before playback Blu-ray 3D di scs, configure the 3D Playback. 1. Click To o l s . 2. Select 3D Playb ack . 3. Check Pr efer to play in 3D mode to enable 3D playba ck. 4. S pecify display device informatio n. Monitor T ype: Choose the correct monitor type in the drop-down menu. T o play on external 3D enabled di splay/TV with H[...]

  • Page 64

    User ’s Manual 3-24 St arti ng WinDVD BD for TO SHIBA Use the following procedure to start “WinDVD BD for TOSHIBA”. 1. When a Blu-ray disc is set in the BD drive, WinDVD BD for TOSHIBA starts automatically . 2. Select St art -> All Programs -> Corel -> Corel WinDVD BD to start "WinDVD BD for TOSHIBA". Operating W inDVD B D [...]

  • Page 65

    User ’s Manual 3-25 Wireless LAN The Wireless LAN is compatible wit h other LAN systems based on Direct Sequence S pread S pectru m / Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE802.1 1 Wireless LAN standard. ■ Frequency Channel Sele ction of 5GHz for IEEE 8 02.1 1a or/and IEEE802.1 1n ■ Frequency Ch[...]

  • Page 66

    User ’s Manual 3-26 Radio Characteristics Radio Charact eristics of Wireless LAN modu le may vary according to: ■ Country/region where the product was purcha sed ■ T ype of pro duct Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been design ed for operation in the li[...]

  • Page 67

    User ’s Manual 3-27 which is license-free and compatible with radio systems in most countries in the world. Radio links Y ou can e asily establish links between two or more devices, wi th these links being maintained even if the devi ces are not within a line-of-sight of each othe r . Security T wo advanced security mechan isms ensure a high le v[...]

  • Page 68

    User ’s Manual 3-28 second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LA N (1000 megabits per second, 1000BASE-T). This section describes how to connect/disconn ect to a LAN. LAN cable types If you are using Gigabit Etherne t LAN (1000 megabits per second, 1000BASE-T), be sure to connect wi th a CA T5[...]

  • Page 69

    User ’s Manual 3-29 Figure 3-6 Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector or router . Check with your LAN administrator and hardware or software vendor before using or configuring a netw ork connection. Optional devices Optional devices can expand the computer's capabilities and its versatility . Thi[...]

  • Page 70

    User ’s Manual 3-30 Memory medi a slot The computer is equipped with a memory media slot that can accommodate some kinds of memo ry media wi th various memory capacities so that you can easily tran sfer data from devices, such as digital cameras and Personal Digital Assist ants. Figure 3-7 Examples of memory media Memory medi a This section provi[...]

  • Page 71

    User ’s Manual 3-31 playback of digital music. For this reason, you cannot copy or playback protected material on another computer or other device, and you may not reproduce any copyrighted material ex cept for your personal enjoyment. Below is a simple explanation for distinguishing SD memo ry cards from SDHC and SDXC memory cards. ■ SD, SDHC [...]

  • Page 72

    User ’s Manual 3-32 ■ Do not expose cards to liquids or store in humi d areas or lay media close to containers of liquid. ■ Do not touch the metal part of a card or expose it to liquids or l et it get dirty . ■ After using card, retu rn it to its case. ■ The card is designed so that it can be inserte d only one way . Do not try to force t[...]

  • Page 73

    User ’s Manual 3-33 Figure 3-8 Inserting a memory media Removing a memor y media The following instru ctions apply to all types of supported media device s. T o remove a memory media, follow the steps as detailed below: 1. Open the Safely Remove Hardware and Eject Media icon on the Windows T askbar. 2. Point to memory media and click the left T o[...]

  • Page 74

    User ’s Manual 3-34 install and remove optional memory modules. Inst alling a mem ory modu le T o install a memory module, follow the steps as detailed below: 1. Shut down the computer - make sure the Power indicator is off (refer to the T urning off the power section in Chapter 1, Getting S tarted if required). 2. Remove the AC adaptor and al l [...]

  • Page 75

    User ’s Manual 3-35 5. Loosen the screw(s) securing the memory module cover in place - please note that the screw(s) are at tached to the cover in order to prevent them from being lost . 6. Slide yo ur fingernail or a thin object under the cover and lift it off. Figure 3-9 Removing the memory module cover 7. Align the no tch of the memo ry modul [...]

  • Page 76

    User ’s Manual 3-36 Figure 3-10 Seating the memory module 8. Seat the memory module cove r in place and secure i t with the screw(s). 1. Notch 3. Slot A 2. Slot B 1 2 3 ■ Never allow metal objects, such as screws, staples and p aper clips, to enter the computer. Foreign met al objects can create a short circuit, which can cause computer damage [...]

  • Page 77

    User ’s Manual 3-37 Figure 3-1 1 Seating the memory module cover 9. Install the battery pack - refer to Replacing the batte ry pack section in Chapter 5, Power and Powe r-Up Modes, if required. 10. Turn your co mputer over . 1 1. Turn the computer on and make su re the added memory is recognized - to confirmed it, St art -> Control Panel ->[...]

  • Page 78

    User ’s Manual 3-38 7. Push the latches away from the mo dule in order to release it - a spring will force one end of the modul e up at an angle. 8. Grasp the module by its edges and remove it from the compu ter . Figure 3-12 Removing the memory module 9. Seat the memory module cove r in place and secure i t with the screw(s). 10. Install the bat[...]

  • Page 79

    User ’s Manual 3-39 External monitor An external analog monitor can be con nected to the External RGB monitor port on the computer . T o connect a m onitor , follow the steps as detailed below: Connecting the mo nitor cable 1. Turn the computer's power of f. 2. Connect the mo nitor cable to the External RGB monito r port. Figure 3-13 Connect[...]

  • Page 80

    User ’s Manual 3-40 When displaying desktop a t external anal og monitor , desktop is sometime s displayed on the center of the moni tor with black bars aroun d desktop (with small size). At that time, please read the manual of the monitor and set the display mode which is supporting at the monitor . The n it will be displayed with suitable size [...]

  • Page 81

    User ’s Manual 3-41 Settings for display video o n HDMI T o view video on the HDMI device, be sure to configure th e following settings otherwise you may find that nothing is displayed. Select HD Form at T o select the display mode, follow the steps as detailed below: 1. Click Start and click Control Panel . 2. Click Appeara nce and Personalizati[...]

  • Page 82

    User ’s Manual 3-42 6. Click List All Modes . 7. Select the one of the below sele ction at List All Modes . HDMI 1.4 3D Video Only some models are supported wit h NVDIA HDMI 1.4 3D Video feature. When a television is conne cted to HDMI port and the television is supporting 3D feature, the NVDIA HDMI 1.4 3D Video feature may be enabled through the[...]

  • Page 83

    User ’s Manual 3-43 9. When "V erify your ability to view stereoscopic 3D Content" screen appears, put on your glasses and select the image you see. 10. Click Health and Safe ty Information , and Internet Explorer will be launched and displays "Health and Safety Information". Please read it carefully . 1 1. Select "GeForc[...]

  • Page 84

    User ’s Manual 3-44 Figure 3-15 Security lock Optional T OSHIBA Accessories Y ou are able to add a numb er of options and accessories in orde r to make your computer even more powerful and convenient to use . For reference, the following list details some of the items that are avai labl e from your reseller or TOSHIBA dealer: Sound System This se[...]

  • Page 85

    User ’s Manual 3-45 ■ T o adjust the volume level of an applica tion that you are u sing, move the slider for the corresponding application. Microphone Leve l Follow the steps below to change the microphone recording level. 1. Right click o n the speaker icon on the T askbar , and select Recor ding devices from the su b menu. 2. Select Micropho[...]

  • Page 86

    User ’s Manual 3-46 Dolby Advanced Audio Dolby Advanced Audio provides a stunning listening experience from any pair of speakers or headphones. Adding a new level of realism to movies, music, and games, this is the quality audio customers have been missing from your computers . Dolby Advanc ed Audio includes: ■ High-Frequency Enhan cer: Analyze[...]

  • Page 87

    User ’s Manual 3-47 Cleaning the compu ter T o help ensure long, trouble-free o per ation, keep the computer free of dust and dirt, and u se care with a ll liquids arou nd it. ■ Be careful not to spill liquids into the comp uter . If the compu ter does get wet, turn the power o ff immediately and let the co mputer dry comp letely - in these cir[...]

  • Page 88

    User ’s Manual 3-48 ■ When carrying your computer , be sure to hold it securely so tha t it does not fall or hit anything. ■ Do not carry your computer by ho lding an y of its protruding elements. Heat dispersal T o protect against overheating, the processor is equipped with an internal temperature sensor which activates a co oling fan or low[...]

  • Page 89

    User ’s Manual 4-1 Chapter 4 C h a p t e r 4 Utilities & Advanced Usage This chapter describes the utilities and special features of this computer , and the advanced usage of some utilities. Utilities and Applications This section describes the pre-installed uti lities that come with the computer and details how to start them. For further inf[...]

  • Page 90

    User ’s Manual 4-2 TOSHIBA Face Recognition TOSHIB A Face Recognition us es a face verification library to verify the face data of users when they log in to Windows. If the verification is successful, the user will be logg ed into Windows automatically . The user can thus avoid ha ving to enter a password or the like, which makes the login proces[...]

  • Page 91

    User ’s Manual 4-3 TOSHIBA eco Utility This computer is equipped with "eco mode". This mode slightly lowers performance of some devi ces to reduce electric power consumption. Y ou can realize measura ble power savings by us ing it continuously . TOSHIBA eco Utility helps you monitor your power savings by showing approximate real time po[...]

  • Page 92

    User ’s Manual 4-4 Corel Label@Once Label@Once allows users to design and print labels for discs. The Labelflash™ fea ture also allows texts and images to be printed on the label surface of Labelflash compatible media without using a printer . This feature of Corel Digital S tudio is onl y available in some models. For more information, please [...]

  • Page 93

    User ’s Manual 4-5 Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features which ma ke the computer more con venient to use. TOSHIBA ReelT ime T his application is a grap hical history/indexing tool that enables you to view recen tly accessed files in a fun and easy-to-use fo rmat. View and scr o[...]

  • Page 94

    User ’s Manual 4-6 Access each function using the following proce dures. *1 T o access the Power Options, click S t art -> Control Panel -> System and Security -> Power Options . Hot keys Hot keys are specific key combinati ons that let you quickly change the system configuration dire ctly from the keyboard wi thout running a system prog[...]

  • Page 95

    User ’s Manual 4-7 Low battery automatic Hibernatio n Mode *1 When battery power is exhausted to the point that computer operation c annot be continued , the system automatically e nters Hibernation Mode and shuts itself down. This can be specified in the Power Options. Heat disper sal *1 T o protect against ov erheating, the processor has an int[...]

  • Page 96

    User ’s Manual 4-8 Using the T OSHIBA Sleep Utility This utility displays wheth er the Sleep and Charge function is enabled or disabled and shows the posi tions of USB ports that support the Sleep and Charge function. It also displays the remaini ng battery capacity . Sleep and Charge Y our computer can supply USB bus p ower (DC5V ) to the USB p [...]

  • Page 97

    User ’s Manual 4-9 function (hereinafter called "compatible ports"). Compatible ports are USB port s that have the ( ) symbol icon. Y ou can use the Sleep and Charge function to charge certain USB- compatible external devices such as mobile phones or portable digital music players. However , the Sleep and Charge function may not work wi[...]

  • Page 98

    User ’s Manual 4-10 Enabling Sleep and Charge This utility can be used to enable and disab le the Sleep and Charge function. Select the Enable Sleep and Charge check box to enable this function for the compatible USB ports. The default state is disabled. Power supply mod e settings Y our PC has multiple charging modes so th at many different USB [...]

  • Page 99

    User ’s Manual 4-1 1 Disclaimer TOSHIBA does not guarantee that the fa ce recognition utility technology will be completely secu re or error- free. TOSHIBA does not guarantee that the face recognition utili ty will accura tely screen out unau th orized users at all times. TOSHIBA is not liable for an y failure or damage that might arise out of th[...]

  • Page 100

    User ’s Manual 4-12 steps as de scribed below: 1. T o launch this utility , click St art -> All Progra ms -> T OSHIBA -> Utilities -> Face Recognition . The Registration screen is displayed for a logged-in user whos e face has not been registered. The Management screen is displayed for a logged -in user whose face has already been reg[...]

  • Page 101

    User ’s Manual 4-13 as described below: 1. T o launch this utility , click St art -> All Progra ms -> T OSHIBA -> Utilities -> Face Recognition . The Management screen is displayed. 2. Select a user which is displa yed in the Management screen. 3. Click the De lete button. " Y ou are about to delete the user data. W ould you like[...]

  • Page 102

    User ’s Manual 4-14 5. Select the account, and click the arrow button. 6. " Please face the camera " will be displ ayed. 7. V erification will be performed. If the authentication is successful, the image data taken in step 6 will be faded in and placed ove r one another . If an error occurs during authentication, you wil l be returned t[...]

  • Page 103

    User ’s Manual 4-15 St arti ng the c omput er by password T o start up the computer with the user p assword, follow these steps: 1. T urn on th e power as described in Chapter 1, Getting Started . The following message wil l appear in the screen: S Enter Password [ ] 2. Enter the Password. 3. Press ENTER . HW Setup This section explains how to us[...]

  • Page 104

    User ’s Manual 4-16 Setup This field displays the installed BIO S version , date and EC version . Password This option allows you to set or reset the user password for power on. User Password Lets you register a new password or change/remove an existing password. T o enter a user password: 1. Select Registere d to display the followin g prompt: E[...]

  • Page 105

    User ’s Manual 4-17 be shown. Display This tab lets you customize your computer’s display settings for either the internal display or an external monitor . Power On Display This tab allows you to select the display to be used when the computer is started. Please note that this setting is only available on standard VGA mode and is not available [...]

  • Page 106

    User ’s Manual 4-18 Panel Open - Power On This feature a llows you to change the Panel Open - Power On setting. Keyboard Wa ke-up on Key board When this feature is enabl ed, and the co mputer is in Sleep Mode, you can turn on the system by pressing any key . However , please be aware that this option will only work with the internal keyboard and [...]

  • Page 107

    User ’s Manual 4-19 The following settings can be changed when the Built-in LAN is Enabled . Connect the AC adaptor when using the Wake-up on LAN function. The battery retention time will be shorter than the times listed in this manual when this function i s enabled. Refer to the Batteries exhausted ti me section in chapter 5, Power and Power-Up [...]

  • Page 108

    User ’s Manual 4-20 actuations or status changes (i .e.: number of power button and FN key combination uses, AC adaptor , battery , LCD, fan, HDD, sound volume, TOSHIBA Expr ess Port Replicator a nd USB information), date of initial system use, and also computer and de vice usage (i.e.: power settings, battery temperature and rechargin g, CPU, me[...]

  • Page 109

    User ’s Manual 4-21 If a TO SHIBA PC Health Monitor m essage is displayed . A message will be displayed if any changes which may interfere with the operation of the program are detected. Fo llow th e instructions displayed on screen in the message. Using the Hard Disk Drive (HDD) Protecti on This computer has a function fo r reduci ng the risk of[...]

  • Page 110

    User ’s Manual 4-22 Detection Level This function can be set to four leve ls. The sensitivity level s in which vibrations, impacts and their similar signs are detected can be set to OFF , 1, 2 and 3 in ascending order . Level 3 is recommended for better pro tection of the computer . However , when the computer i s used in a mo bile environment or[...]

  • Page 111

    User ’s Manual 4-23 System Recovery There is a hidden partition allocated on the hard disk drive for the System Recovery Options in the event of a problem. Y ou can also create recovery media and restore the system. The following items will be described in this section: ■ System Recovery Options ■ Creating Recovery Medi a ■ Restoring the pr[...]

  • Page 112

    User ’s Manual 4-24 A recovery image of the software on your computer i s stored on the hard disk drive, and can be copied to eit her DVD or USB Flash Memory by using the following steps: 1. Select either blank DVD or USB Flash Memory . The application will allow you to choose from a variety of di fferent media onto which the recovery imag e can [...]

  • Page 113

    User ’s Manual 4-25 1. Load the Recovery Medi a into the ex ternal ODD or insert the recovery USB Flash Memory into one availabl e USB port. 2. Turn of f the computer's power . 3. While h olding down F12 key on the keyboard, tu rn on your computer - when the TOSHIBA Leading Inno vation >>> logo scree n appears, release the F12 ke y [...]

  • Page 114

    User ’s Manual 4-26 Restoring the pre-in sta lled sof tware from the Recovery hard disk drive A portion of the total hard disk dr ive space is configured as a hidden recovery partition. This p artition stores files which can be used to restore pre-installed software in the event of a problem. If you subsequently set up your hard disk drive again,[...]

  • Page 115

    User ’s Manual 5-1 Chapter 5 C h a p t e r 5 Power and Power-Up Modes The computer's powe r resources include the AC adaptor , battery pack and any internal batteries. This chapter provides details on making the most effective use of these resources, and includes informatio n on charging and changing batteries, tips for saving battery power [...]

  • Page 116

    User ’s Manual 5-2 Monitoring of power condition As shown in the below table, the Battery , DC IN and Power indicators on the system indicator panel alert you to the computer ’s operating capability and battery charge status. Battery indicator Check the Battery indicator to determine the status of the battery pack. The following indicator lig h[...]

  • Page 117

    User ’s Manual 5-3 DC IN indicator Check the DC IN indicator to determine t he power status with the AC adaptor connected - the follow ing indi cator conditions shou ld be noted: Power i ndica tor Check the Power indicator to determine the pow er status of the computer - the following indicator conditions shou ld be noted: Battery This section ex[...]

  • Page 118

    User ’s Manual 5-4 Real Time Clock (RTC) battery The Real Time Clock (RTC) battery provides power fo r the internal real time clock and calendar function and also main tains the system configuration while the computer is turned off. If the R TC battery becomes completely discharged, th e system will lose this in formation and the real time clock [...]

  • Page 119

    User ’s Manual 5-5 Charging the batteries When the power in the battery pack becomes low , the Battery indicator will flash amber to indicate that only a fe w minutes of battery power remain. If you continue to u se the computer w hile the Ba ttery indicator flashes, the computer will enable Hibernation Mode so that you do not lose any data, and [...]

  • Page 120

    User ’s Manual 5-6 In such cases you should follow the steps as det ailed below: 1. Fully disch arge the battery by leavin g it in the computer with the power on until the system automat ically turns itself off. 2. Connect the AC adaptor to the DC IN 19V jack of the computer , and to a wall outlet that is supplying power . 3. Charge the battery u[...]

  • Page 121

    User ’s Manual 5-7 ■ Whether you close the display pa nel when you are not using the keyboard - closing the display saves power . ■ The environmental temperature - operating time decreases at low temperatur es. ■ The condition of the battery terminals - you should always ensure the terminals stay clean by wiping them with a clean dry cloth [...]

  • Page 122

    User ’s Manual 5-8 period of time. This section explains how to remove and install the battery pack, and begins with the removal process which is detailed through the following steps. Removing the battery pa ck T o remove a discharged battery , follow the steps as detailed below: 1. Save your work. 2. Turn the computer's power of f - ensure [...]

  • Page 123

    User ’s Manual 5-9 1. Insert the battery pack as far as it will go into the computer . 2. Ensure that the battery pack is securely in place and the battery lock is in its lock position. 3. T urn your comput er over . Power-up modes The computer has three differ ent power-up modes as follows: ■ Shut Down Mode: T he computer will s hut d own with[...]

  • Page 124

    User ’s Manual 6-1 Chapter 6 C h a p t e r 6 T r oubleshooting TOSHIBA have designed this computer for durability , however, should problems occur you are able to use the procedures detailed in this chapter to help determi ne the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems fr [...]

  • Page 125

    User ’s Manual 6-2 optional accessories fo r further information on its inst allation and configuration). ■ Check all cables to ensure they are corre ctly and firmly attached to the computer - loose cables can cause signal e rrors. ■ Inspect all connecting cables for loose wires and all connectors for loose pins. ■ Check that your CD/DVD/BD[...]

  • Page 126

    User ’s Manual 6-3 If something goes w rong Y our program stops responding If you are working with a program that suddenly freezes all ope rations, chances are the program has stopped respond ing. Y ou can exit the faile d program without sh utting down the operating system or closing other programs. T o close a program that has stopped respondin[...]

  • Page 127

    User ’s Manual 6-4 The computer will not start Make sure you attached the AC adaptor and power cord/cable properly or installed a charged battery . If you are using the AC adaptor , check that the wall outlet is working by plugging in another device, such as a lamp. V erify that the computer is on by looking at the ON/OFF indicator . If the indic[...]

  • Page 128

    User ’s Manual 6-5 AC power If you have trouble turning on the comp u ter with the AC adaptor connected you should check the status of the DC IN indicator . Please refer to Chapter 5, Power and Power-Up Modes for further information. Battery If you suspect a problem with the battery , you should check the status of the DC IN indicator as well as [...]

  • Page 129

    User ’s Manual 6-6 Battery doesn’t charge when the AC adaptor is attached ( Battery indicator does not glow amber). If the battery is complete ly discharged, it will not begin charging immediately , in th ese instances you should wait a few minutes before trying again. If the battery still does not charg e, you should check that the power outle[...]

  • Page 130

    User ’s Manual 6-7 Real Time Clock Keyboard Keyboard problems can be caused by the setup and conf iguratio n of the computer - please refer to the section The Ke yboard in Chapter 3, Operating Basics, for further information. Internal display p anel Apparent computer's display pane l problems may be related to the computer's setup and c[...]

  • Page 131

    User ’s Manual 6-8 Hard disk drive Optical Disc Drive For more inform ation, refer to Chapter 3, Operating Basics . Markings appear on the computer's display panel. These marks may have come from contact with the keyboard and T ouch Pad while the displ ay panel has been closed. Y ou shoul d try to remove the marks by gently wiping the displa[...]

  • Page 132

    User ’s Manual 6-9 Memory Media Card For further information, please refer to Chapter 3, Operating Basics . Pointing device If you are using a USB mouse, you should also refer to both the USB mouse section in thi s chapter , and the documentation supplied with your mouse. Y ou cannot access a CD/DVD/BD in the drive Make sure the drive’s disc tr[...]

  • Page 133

    User ’s Manual 6-10 T ouch Pad USB mouse Problem Procedure The T ouch Pad does not work. Check the Device Select settings. Click St art -> Contro l Panel -> Hardware and Sound -> Mouse . Pressing FN + F9 or T ouch Pad ON/O FF button to enable. On-screen pointer does not respond to pointing device operation In this instance the sys tem mi[...]

  • Page 134

    User ’s Manual 6-1 1 USB device In addition to the information in this section, p lease also refer to the documentation supplied with yo ur USB device. Sleep and Charge function For more informa tion and settings, please refer to the Using the TOSHIBA Sleep Utility section in Chapte r 4, Utilities & Advanced Usage. Double-clicking does not wo[...]

  • Page 135

    User ’s Manual 6-12 Problem Procedure I cannot use the Sleep and Charge function. Sleep and Charge function may be disabl ed. Select the "Enable Sleep and Charge" che ck box in the TOSHIBA Sleep utility to enable this function. When there is a current ov erflow of the external device connected to the compatible port, USB bus power (DC5V[...]

  • Page 136

    User ’s Manual 6-13 Additional mem ory modu le Please also refer to Chapter 3, Operating Basics , for further in formation on installing and removing memory modul es. Sound system In addition to the information in this section, p lease also refer to the documentation supplied with your a udio device. The "USB W akeup function" does not [...]

  • Page 137

    User ’s Manual 6-14 External monitor Please also refer to Chapter 3, Operating Basics , and to the documentation supplied with yo ur monito r for further information. Problem Procedure No sound is heard Adjust the volume. T o increase the volume c lick the volume up button, and to decrease it click the volume down button. Check the software volum[...]

  • Page 138

    User ’s Manual 6-15 LAN Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 3, Operating Basics . No display T ry adjusting the contrast an d brightness controls on the external monitor . Press the FN + F5 hot key in order to change [...]

  • Page 139

    User ’s Manual 6-16 Bluetooth For further information on Bluetooth wire less communication, please refer to Chapter 3, Operating Basics . T OSHIBA support If you require any additional help using your compu ter or if you are having problems operating the computer, you may need to cont act TOSHIBA for additional techni cal assistance. Before you c[...]

  • Page 140

    User ’s Manual 6-17 related, visit TOSHIBA te chnical support website http://www .to shiba.co.jp/worldwide/.[...]

  • Page 141

    User ’s Manual A-1 Appendix A A p p e n d i x A S pecifications This appendix summarizes the computer ’s technical specifications. Physical Dimensions Environmental Requirements Power Requirement s Size 329(w) x 221 (d) x 27.9/36.9 (h) millimeters (not including parts that extend beyond the main body). Conditions Ambient temp erature Relative h[...]

  • Page 142

    User ’s Manual A-2 External RGB monitor port pin assignment I/O (I): Input to computer I/O (O): Output from computer Pin Signal Name Description I/O 1 CRV Red Video Signal O 2 CGV Green Video Signal O 3 CBV Blue Video Si gnal O 4 Reserved Reserved 5 GND Ground 6 GND Ground 7 GND Ground 8 GND Ground 9 +5V Power Supply 10 GND Ground 1 1 Reserved Re[...]

  • Page 143

    User ’s Manual B-1 Appendix B C h a p t e r B AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Certification agencies In Europe, two cond[...]

  • Page 144

    User ’s Manual B-2 15P (250V) or 5-15P (125V) as designat ed in the U.S. National Electrical code handbook and the Canadian Electrical Co de Part II. The following illustra tions show the pl ug shapes for the U.S.A. and Canada, the United Kingdom, Australia, Europe and China. USA UL approved United Kingdom BS approved Australia AS approved Europe[...]

  • Page 145

    User ’s Manual C-1 Appendix C A p p e n d i x C Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. Non-applicable Icons Certain computer chassis are design ed to accommodate all possible configurations for an entire product se ries. Therefore, please b e aware that your selected model may not have[...]

  • Page 146

    User ’s Manual C-2 data or damage to the product when used outside recommended conditions. T o avoid risk of lost data, always make back-up copies of data by periodically storing it on an ex ternal storage med ium. For optimum performance, use your computer product only under recommended conditions. Read additional restricti ons in your product d[...]

  • Page 147

    User ’s Manual C-3 Battery Life Battery life may vary considerably depend ing on product model, configuration, applications, power ma nagement settings and features utilized, as well as the natural perf ormance variations produced by the design of indi vidual compone nts. Pu blished battery life numbers are achieved on select models and config ur[...]

  • Page 148

    User ’s Manual C-4 Wireless LAN The transmission speed over th e wireless LAN and th e distance over which wireless LAN can re ach may vary depen ding on surro unding electromagnetic environment, obstacles, access po int design and configuration, and client design and software/hardware configurati ons. The actual transmission speed will be lowe r[...]

  • Page 149

    User ’s Manual D-1 Appendix D A p p e n d i x D Information for Wireless Devices Wireless LAN Interoperab ility The Wireless LAN is compatible wit h other LAN systems Direct Sequence S pread S pectrum (DSSS) /Orthogonal Frequency Division Multiplexing (OFDM) radio technology , and is compliant to: ■ The IEEE 802.1 1 S tandard on Wireless LANs ([...]

  • Page 150

    User ’s Manual D-2 Wireless Devices and your health Wireless products, like other radio devices, emit radio frequency electromagnetic energy . The level of energy emitted by Wireless products however is far much less than the electromagnetic ene rgy emitted by wireless devices like for exampl e mobile phones. Because Wireless products operate wit[...]

  • Page 151

    User ’s Manual D-3 frequency and safety standards. Europe Restrictions for Use of 2400. 0-2483.5MHz Frequencies in Europe Restrictions for Use of 5150-5350MHz Frequencies in Europe France: Outdoor use limited to 10 mW e.i.r .p. with in the band 2454- 2483.5MHz Military Radiolocation use.Refa rming of the 2.4GHz band has been ongoing in recent yea[...]

  • Page 152

    User ’s Manual D-4 Restrictions for Use of 5470-5725MHz Frequencies in Europe T o remain in conformance with European spectrum usage laws for Wireless LAN operati on, the above 2. 4GHz and 5GHz chann el limitations apply for outdoor usage. The user should use th e wireless LAN utility to check the current channel of operation. If op eration is oc[...]

  • Page 153

    User ’s Manual D-5 Canada - Industry Canada (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two condi tions: (1) this device may not cause interference, and (2) this device mu st accept any interference, includi ng interference that may cause undes ired operation o f this device. The term “IC” [...]

  • Page 154

    User ’s Manual D-6 Ta i w a n Using this equip ment in J ap an In Japan, the frequency bandwidth of 2,400MHz to 2,483.5MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification syste m s (premises radio station and specified low-powe r radio station). 1. Important notice Th[...]

  • Page 155

    User ’s Manual D-7 2. Indication for Wireless LAN The indication shown below appe ars on this equipment. 1. 2.4 : This equipment uses a frequency of 2.4GHz. 2. DS : This equipment uses DS-SS modulation. 3. OF : This equipment uses OFDM modulation. 4. 4 : The interference range of this equipment is less than 40m. 5. : This equipment uses a frequen[...]

  • Page 156

    User ’s Manual D-8 ■ Atheros AR9285 Wireless Network A dapter b/g/n (b/g) Wireless LAN The Name of the radio equipment: AR5B95 DSP Research, Inc. Approval Number: D081038 003 ■ Realtek® RTL8188CE Wireless LAN 802.1 1n PCI-E N IC b/g/n Wireless LAN The Name of the radio equipment: RTL8188CE Japan Approvals Institute for T elecommunications Eq[...]

  • Page 157

    User ’s Manual D-9 Approved Countries/Regio ns for the Realtek® RTL81 88CE Wireless LAN 802.1 1n PCI- E NIC b/g/n W ireless LAN This equipment is approved to the r adio standard by the countries/regions in the following table. As of Jan. 201 1 Chile China Colombia Costa Rica Croatia Cyprus Czech Republic Denmark Dominican Republic Ecua dor Egypt[...]

  • Page 158

    User ’s Manual D-10 Approved Countries/Regio ns for the Atheros AR9002WB-1 NG Wireless Netw ork Adapter b/g/n (b/g) W ireless LAN a nd Bluetooth This equipment is approved to the r adio standard by the countries/regions in the following table. Argentina Australia Austria Azerbaijan Bahrain Belgium Bolivia Bosnia and Herzegovina Brazil Bulgaria Ca[...]

  • Page 159

    User ’s Manual D-1 1 As of Jan. 201 1 ■ Connection with an access point by the Infrastructure mode is Ch1- Ch13. Albania Algeria Angola Argentina Australia Austria Azerbai jan Bahrain Bangladesh Belarus Belgium Bolivia Bosnia and Herzegovina Botswana Brazil Bulgaria Burkina Faso Burundi Cambodia Cameroon Canada Central African Republic Chile Ch[...]

  • Page 160

    User ’s Manual D-12 Swaziland Sweden Switzerland T aiwan T ajikistan Thailand T ogo T unisia T urkey Turkmenist a UAE UK Ukraine Uruguay USA V enezu ela Vi etnam Y emen Zambia Zimbab we[...]

  • Page 161

    User ’s Manual Glossa ry-1 Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference. Abbreviations AC: Alternating current ANSI: American National S tandards Institute AMT : Intel Active Management T echnology ASCII: American S tandard Code for Information Interchange BIOS: basic input/o[...]

  • Page 162

    User ’s Manual Glossa ry-2 IEEE: Institute of Electrical and Electronics Eng ineers I/O: input/output IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte MMC: multi media card OCR: optical charact er recognitio n (reader) PC: personal computer PCI: peripheral component int[...]

  • Page 163

    User ’s Manual Index-1 Inde x A AC adaptor additional, 3-44 connecting, 1-3 DC IN 19V jack, 2-3 ASCII characters, 3-7 B Battery extending life, 5-7 monitoring capacity, 5-6 real time clock, 2-12, 5-4 save mode, 4-6 types, 5-3 Battery indicator, 5-2 Battery pack, 2-5 additional, 5-1 replacing, 5-7 Bluetooth, 3-26 Bluetooth Stack for Windows by Tos[...]

  • Page 164

    User ’s Manual Index-2 HDMI out port, 2-4 Heat dispersal, 3-48, 4-7 Hibernation Mo de, 4-8 Hot keys, 4-6 Brightness Down, 3-5 Brightness Up, 3-5 Hibernate, 3-5 Lock, 3-5 Mute, 3-5 Output, 3-5 Power Plan, 3-5 Sleep, 3-5 Touch Pad, 3-5 Wireless, 3-5 Zoom, 3-5 HW Setup accessing, 4-15 Boot priority, 4-17 display, 4-17 general, 4-15 keyboard, 4- 18 L[...]

  • Page 165

    User ’s Manual Index-3 Additional memo ry module, 6-13 Analyzing the problem, 6- 2 Battery, 6-5 Bluetooth, 6-16 Dual Pointing device, 6-9 External monitor, 6-14 Hard disk drive, 6-8 Hardware and s ystem checklist, 6-4 Internal displa y panel, 6-7 Keyboard, 6-7 LAN, 6-15 Memory Media Car d, 6-9 Optical Disk Drive, 6-8 Overheating power down, 6- 4 [...]