Toshiba L655S5112RDDUP manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Toshiba L655S5112RDDUP, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Toshiba L655S5112RDDUP one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Toshiba L655S5112RDDUP. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Toshiba L655S5112RDDUP should contain:
- informations concerning technical data of Toshiba L655S5112RDDUP
- name of the manufacturer and a year of construction of the Toshiba L655S5112RDDUP item
- rules of operation, control and maintenance of the Toshiba L655S5112RDDUP item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Toshiba L655S5112RDDUP alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Toshiba L655S5112RDDUP, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Toshiba service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Toshiba L655S5112RDDUP.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Toshiba L655S5112RDDUP item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    computers.tosh iba-europe.com User ’ s Manual Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series[...]

  • Page 2

    User ’s Manual ii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series T able of Content s Chapter 1 Getting St arted Equipment ch ecklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Getting S t arted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 System[...]

  • Page 3

    User ’s Manual iii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Chapter 4 Operating Basics Using the T ouch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Web Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Using the TOSHIBA Face Recogni[...]

  • Page 4

    User ’s Manual iv Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Appendix A S pecifications Appendix B Display Controller and Vi deo mode Appendix C Wireless LAN Appendix D Bluetooth wireless technology Interoperability Appendix E AC Power Cord and Connectors Appendix F T OSHIBA PC Health Monitor Appendix G Legal Footnotes Appe[...]

  • Page 5

    User ’s Manual vi Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Copyright © 2010 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No p at ent liability is assumed, with respect to the use of the information cont[...]

  • Page 6

    User ’s Manual vii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Memory S tick and Memory S tick PRO are trademarks or registered trademarks of Sony Corporatio n. ConfigFree is a trademark of T oshiba Corporation. Wi-Fi is a registered trade ma rk of the Wi-Fi Alliance. Secure Digital and SD are trademarks of SD Card Associati[...]

  • Page 7

    User ’s Manual viii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series W orking environm ent This product was designed to fulfil the EMC (Electromag netic Compatibility) requirements to be observed for so-called "Residential, commercial and light industry environments". TOSHIBA do not approve the use of this product in wo[...]

  • Page 8

    User ’s Manual ix Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Following information is only valid for EU-mem ber S t ates: Disposal of product s Disposal of batteries a nd/or accumu lators The crossed out wheeled dust bin symbol indicates tha t products must be collected and disposed of separately from household waste. Integ[...]

  • Page 9

    User ’s Manual x Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Disposing of the computer and the computer's batteries ■ Discard this compu ter in acco rdance with appli cable laws and regulations. For further information, cont act y our local government. ■ This computer contains rechargeable batteries. After repeated [...]

  • Page 10

    User ’s Manual xi Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series ENERGY ST AR ® Program GOST Y our computer model may be Energy S t ar ® qualified. If the model you purchased is quali fied, it is labeled with the ENERGY ST AR logo on the computer and the following in formation applies. TOSHIBA is a p artner in the ENERGY ST A[...]

  • Page 11

    User ’s Manual xii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Optical disc drive safety instructions TEAC DVD Super Multi with Double Layer Recording DV -W28S Be sure to check the precautions at the end of this section. ■ The DVD Super Multi/BD-Combo/BD-Writer drive model employs a laser system. T o ensure prope r use of [...]

  • Page 12

    User ’s Manual xiii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Panasonic System Netw orks DVD Super Multi UJ890 BD-Combo UJ141 BD-Writer UJ240 HIT ACHI-LG Data S torage, Inc. DVD Super Multi GT30N/GT30F Panasonic System Networks Co., Ltd. Hitachi-LG Data Storage, Inc. 22-23,KAIGAN 3-CHOME, MINA TO-KU,TOKYO,108-0022 JAP AN[...]

  • Page 13

    User ’s Manual xiv Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series TOSHIBA SAMSUNG ST ORAGE TECHNOLOGY DVD Super Multi TS-L633C/TS-L633Y Precautions TOSHIBA SAMSUNG STORAGE TECHNOLOGY KOREA CORPORATION 416, MEATAN-3 DONG, YEONGTONG-GU, SUWON CITY, GYEONGGI, 443-742, KOREA CAUTION: This appliance contains a laser system and is cl[...]

  • Page 14

    User ’s Manual xxii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Preface Congratulations on your purchase of the Satellite L650/L655/L650D /L655D / Satellite Pro L650 /L650D Series compute r . This powerful notebook computer provides excellent expans ion capability , includes mul timedia functionality , and is designed to pro[...]

  • Page 15

    User ’s Manual xxiii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Icons Icons identify ports, dials, and other parts of your computer . The indicator pane l also uses ic ons to identify th e component s it is pro viding info rmation on. Keys The keyboard keys are used in th e te xt to describe many computer operations. A dist[...]

  • Page 16

    User ’s Manual xxiv Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series T erminology This term is defined in this document as follows: Start The word " Sta rt " refers to the " " button in Windows 7. HDD or Hard disk drive Some models are equip ped with a "So lid S tate Drive (SSD)" instead of a hard di[...]

  • Page 17

    User ’s Manual xxv Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho wever , cert ain precautions should be observed to further reduce the risk of personal injury or damag e to the computer . Be cert[...]

  • Page 18

    User ’s Manual xxvi Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series T o keep your computer in prime operati ng condition, protect your work area from: ■ Dust, moisture, and direct sunlig ht. ■ Equipment that generate s a strong electromagnetic field, such as stereo speakers (other tha n speak ers that are connected to the co[...]

  • Page 19

    User ’s Manual xxvii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Mobile phones Please be aware that the use of mob ile phones can inte rfere with the aud io system. The operation of the computer wil l not be impa ired in any way , but it is recommended that a minimum distance of 30cm is maintained between the computer and a [...]

  • Page 20

    User ’s Manual 1-1 Getting S tarted Chapter 1 Getting S t arted This chapter provides an equ ipment checklist, and basic informa tion to start using your computer . Equipment checklist Carefully unpack your comp uter , t aking care to save the box and packaging materials for future use. Hardware Check to make sure you have al l the following item[...]

  • Page 21

    User ’s Manual 1-2 Getting S tarted Sof tware The following Wi ndows ® operating system and uti lity sof tware are pre- installed. ■ Windows 7 ■ TOSHIBA V alue Added Package ■ TOSHIBA Recovery Media Creator ■ WinDVD BD for TOSHIBA (Is preinstalled with some models) ■ Corel DVD MovieFactory for TOSHIBA (Is preinstalled with some models)[...]

  • Page 22

    User ’s Manual 1-3 Getting S tarted Connecting the A C adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power . The AC adaptor can be connected to any po wer sour[...]

  • Page 23

    User ’s Manual 1-4 Getting S tarted 1. Connect the power cord to the AC adaptor . Connecting the power cord to the AC adaptor (2-pin plug) ■ Always use the TOSHIBA AC adaptor that was included with your computer , or use AC adaptors specifie d by TOSHIBA to avoid any risk of fire or other damage to the co mputer . Use of an incompatible AC adap[...]

  • Page 24

    User ’s Manual 1-5 Getting S tarted Connecting the power cord to the AC adaptor (3-pin plug) 2. Connect the AC adaptor ’s DC output plug to the DC IN 19V jack on the right side of the computer . Connecting the DC output plug to the computer 3. Plug the power cord into a live wall outlet - the Battery and DC IN indicators on the front of the com[...]

  • Page 25

    User ’s Manual 1-6 Getting S tarted Opening the disp lay The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main b ody of the computer is not raised, slowly lift the display panel - this will allow the angle of the d isplay panel to be adjusted to provide opti [...]

  • Page 26

    User ’s Manual 1-7 Getting S tarted T urning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Power-Up Modes for more information. 1. Open the display panel. 2. Press and hold the computer's power[...]

  • Page 27

    User ’s Manual 1-8 Getting S tarted T urning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode. Shut Down Mode When you turn off the power in Shut Do wn Mode no data will be saved and the computer will boot to the opera ting system's main screen the next time it is turned o[...]

  • Page 28

    User ’s Manual 1-9 Getting S tarted Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous workin g environment more ra pidly than does the Hibernation Mode feature. ■ Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the S[...]

  • Page 29

    User ’s Manual 1-10 Getting S tarted When you turn the power back on, you can continue where you left when you shut down the computer . Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned back on immediately after shutting down. ■ Memory circuits are exposed to st atic electricity or electrica[...]

  • Page 30

    User ’s Manual 1-1 1 Getting S tarted S tarting Hibernation Mode T o enter Hibernation Mode, follow the steps below . 1. Click Start . 2. Point to the arro w icon ( ) and then select Hibernate from the menu. Automatic Hibernation Mode The computer can be configured to ent er Hibernation Mode auto matically when you press the power button or clos [...]

  • Page 31

    User ’s Manual 1-12 Getting S tarted System Recovery Options an d Restoring the preinst alled sof twa re About 1.5GB hidden partition is allocat ed on the hard drive for the Syste m Recovery Options. System Recovery O ptions The System Recovery Options feature is installed on the hard di sk when shipped from the factory . The System Recovery Opti[...]

  • Page 32

    User ’s Manual 1-13 Getting S tarted Creating Optical Reco very Discs This section describes how to create Recovery Discs. A recovery image of the software on your computer i s stored on the hard disk drive, and can be copied to DVD media by using the following steps: 1. Have a blank DVD media ready . 2. The application will allow you to choos e [...]

  • Page 33

    User ’s Manual 1-14 Getting S tarted Restoring the pre-inst alled softw are from your crea ted Recovery Discs If the pre-installed files are damaged , you are able to either use the Recovery Discs you have create d to re store the computer to the state it was in when you originally recei ved it. T o perform this restoration, follow the steps belo[...]

  • Page 34

    User ’s Manual 1-15 Getting S tarted 1. T urn of f your computer . 2. While holding down 0 (zero) key on the keyb oard, turn on your computer . A menu will be displayed from which you should fo llow the on-screen instructions. Ordering Recovery Discs from T OSHIBA* You can order Product Recovery discs for your notebook from the TOSHIBA Europe Bac[...]

  • Page 35

    User ’s Manual 2-1 The Grand T our Chapter 2 The Grand T our This chapter identifies the vari ous components of the computer - it is recommended that you become familiar with each before you operate th e computer . Front with the display closed The following figure shows the computer ’s front with it s display panel in the closed position. Fron[...]

  • Page 36

    User ’s Manual 2-2 The Grand T our Lef t side The following figure shows the comp uter ’s left side. The left side of the computer * Provided with some models. 1. Security lock slot 6. LAN jack 2. Modem jack* 7. eSA T A/USB combo port 3. Cooling vents 8. Microphone jack 4. External mon itor port 9. Headphon e jack 5. HDMI port* 1 2 3 4 5 6 7 8 [...]

  • Page 37

    User ’s Manual 2-3 The Grand T our External monitor port This port provides 15-pin, analo g VGA port. This port allows you to connect a n external monitor to the computer . HDMI out port HDMI out port can connect with T ype A connector HDMI cable . HDMI cable can send video a nd audio signals. In addition to this, it can send and re ceive control[...]

  • Page 38

    User ’s Manual 2-4 The Grand T our Right side The following figure shows the comp uter ’s right side. The right side of the computer * Provided with some models. 1. Bridge media slot 3. Optical di sc drive 2. Universal Serial Bus (USB 2.0) port s 4. DC IN 19V jack 1 3 4 2 Bridge me dia slot This slot lets you insert an SD™/SDHC™/SDXC™ mem[...]

  • Page 39

    User ’s Manual 2-5 The Grand T our Back The following figure shows the comp uter ’s back. The back of the computer DC IN 19V jack The AC adaptor connects to this jack in order to power the computer a nd charge its internal batteries. Please note that you should only use the model of AC adaptor supplied with the computer at the time of purchase [...]

  • Page 40

    User ’s Manual 2-6 The Grand T our Underside The following figure shows the undersi de of the computer . Y ou shou ld ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage. The underside of the computer 1. Battery lock 3. Memory module slot 2. Battery release latch 1 2 3 Battery lock Slide the batt ery[...]

  • Page 41

    User ’s Manual 2-7 The Grand T our Front with the display op en This section shows the computer with the display panel open. In order to open the display , lift the display panel up and position it at a comfortable viewing angle for you. The front of the computer with the display panel open * Provided with some models. Product appearance depends [...]

  • Page 42

    User ’s Manual 2-8 The Grand T our Web Ca me r a Web Ca me ra is a device that allows you to record video or take photographs with your computer . Y o u can use it for video chatting or video conferences using a communicatio n tool such as Windows Live Messeng er . T OSHIBA Web Camera Applicatio n will help you to add various video effects to you[...]

  • Page 43

    User ’s Manual 2-9 The Grand T our Indicators This section explains ind icator functions. System indica tors LED system indicators next to their resp ective icons, glow when specific computer operations are in progress. System indicators T ouch Pad The T ouch Pad l ocated in the palm rest is used to control the movement of the on-screen pointer .[...]

  • Page 44

    User ’s Manual 2-10 The Grand T our Keyboard indicators The following figures show the position s of the CAPS LOCK indicator and the NUM LOCK indicator which show the following conditi ons: ■ When the CAPS LOCK indicator glows, the keyboard will produce capitals when any letter is typed. ■ When the NUM LOCK indicator glows, the ten key allows[...]

  • Page 45

    User ’s Manual 2-1 1 The Grand T our Optical disc drives The computer may b e installed with a DVD Super Multi, BD-Combo or BD- Writer drive. A Serial A T A interface controller is used for optical disc operation. When the computer is accessi ng a optical disc, an indicator on the drive glows. For information on loadin g and unloading discs refer[...]

  • Page 46

    User ’s Manual 2-12 The Grand T our W rit able discs This section describes the types of writ able CD/DVD/BD discs. Check the specifications of your d rive to see the types of discs it can write. Use TOSH IBA Disc Creator and Corel DVD Movi eFactory to writ e comp act discs. Refer to Chapter 4, Operating Basics . CDs ■ CD-R discs can be written[...]

  • Page 47

    User ’s Manual 2-13 The Grand T our BD-W riter drive The full-size BD-Writer drive mo dule lets you record data to rewritable CD/DVD/BDs as well as run either 12 cm (4.72") or 8cm (3.15" ) CD/DVD/BDs without using an adaptor . CD read 24 speed (maximum) CD-R write 24 speed (maximum) CD-RW write 16 speed (maximum, Ultra-speed media) The [...]

  • Page 48

    User ’s Manual 2-14 The Grand T our DVD Supe r Multi drive The full-size DVD Super Multi drive module lets you record data to rewritable CD/DVDs as well as run ei ther 12 cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor . AC adaptor The AC adaptor can automa tically adjust to any voltage ranging from 100 to 240 volts and to a [...]

  • Page 49

    User ’s Manual 2-15 The Grand T our The AC adaptor (3-pin plug) ■ Depending on the mo del in question, either a 2-pin or 3-pin adaptor/power lead will be bundled with the computer. ■ Do not use a 3-pin to 2-pin conversion plug. ■ The supplied powe r cord conforms to sa fety rules and re gulations in the region the produ ct is bought and sho[...]

  • Page 50

    User ’s Manual 3-1 Hardware, Utilities and Options Chapter 3 Hardware, Utilities and Options Hardware This section describes the hardware of your computer . The actual specifications may vary depending on the model you purchased. Processor Memory CPU Processor type varies depen ding on the model. T o check which type of processor is included in y[...]

  • Page 51

    User ’s Manual 3-2 Hardware, Utilities and Options Power Video RAM The memory in a computer's graphics adaptor , used to store the image displayed on a bitmap display . The amount of Vide o RAM avail able is dependent on the computer's system me mory . Star t  Control Panel  Appearance and Personalization  Display  Adjust re[...]

  • Page 52

    User ’s Manual 3-3 Hardware, Utilities and Options Disks Optical disc drive AC adaptor The AC adaptor provides power to the system and recharges th e batteries when they are low . It comes with a detachable power cord which will either have a 2-pin or 3-pin plug encl osure. As the AC adaptor is universal, it can receive a range of AC voltages fro[...]

  • Page 53

    User ’s Manual 3-4 Hardware, Utilities and Options Display The computer's internal disp lay panel supports high-resolution video graphics and can b e set to a wide range of viewing angl es for maximum comfort and readability . Display Power Saving T echno logy Y our model may include the Display Po wer Saving T echnology feature that can sav[...]

  • Page 54

    User ’s Manual 3-5 Hardware, Utilities and Options T o access this center , go to: Star t  All Programs  Catalyst Control Center  CCC - Advanced In this control center: 1. Click Graphics at the upper left, and then select PowerPlay™ . from the drop-down menu. 2. Select the Enable PowerPlay™ . check box, and then select the Enable V a[...]

  • Page 55

    User ’s Manual 3-6 Hardware, Utilities and Options Communications Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features which ma ke the computer more con venient to use. Access each function using the following proce dures. *1 T o access the Power Options, click Start  Control Panel  Syst[...]

  • Page 56

    User ’s Manual 3-7 Hardware, Utilities and Options HDD automatic power off *1 This feat ure automa tically cut s of f power to the hard disk drive when it is not acce ssed for a specified time, with pow er being restored when the hard disk drive is next accessed. This ca n be specified in the Power Opti ons. System automatic Sleep/Hibernation Mod[...]

  • Page 57

    User ’s Manual 3-8 Hardware, Utilities and Options Heat dispersal *1 T o protect against overhea ting, the processor has an internal temperature sensor so that, if the computer's internal temperature rises to a certain level, the cooling fan is turned on o r the processing speed is lowered. This can be specified in the Power Opti ons. Maximu[...]

  • Page 58

    User ’s Manual 3-9 Hardware, Utilities and Options Utilities and Applications This section describes the pre-installed uti lities that come with the computer and details how to start them. For further information on their operation, you may refer to each utili ty's online manua l, help files or README.TXT file (if applicable). Y ou may not h[...]

  • Page 59

    User ’s Manual 3-10 Hardware, Utilities and Options Bluetooth S t ack for Window s by T oshiba This software enables communication betwee n the computer and external Bluetooth devices such as printers and mobile phones. Bluetooth functions cannot be used in models that do not h ave a Bluetooth module installed. TOSHIBA Assist TOSHIBA Assist is a [...]

  • Page 60

    User ’s Manual 3-1 1 Hardware, Utilities and Options TOSHIBA Service Statio n This application allows yo ur computer to automatically search for TOSHIBA sof tware updates or other alerts from TOSHIBA that are specific to your computer system and it s programs. When enabl ed, this appli cation periodically transmits to our servers a limited amount[...]

  • Page 61

    User ’s Manual 3-12 Hardware, Utilities and Options Optional devices Optional devi ces can exp and the com puter's ca pabiliti es and its versati lity . This sec tion descr ibes the connect ion or ins tallation of the foll owing devi ces: Cards/memory ■ Bridge medi a slot ■ Secure Digital™ (SD) Card (SD me mory card, SDHC memory card, [...]

  • Page 62

    User ’s Manual 3-13 Hardware, Utilities and Options Examples of memory media Memory media This section provides the important safety precautions in order to handle your memory media. Points to note about the SD/SDHC/SDXC memory card SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prev[...]

  • Page 63

    User ’s Manual 3-14 Hardware, Utilities and Options ■ SD, SDHC and SDXC memory cards appear the same externally . However , the logo on SD, SDHC and SDXC memory cards is different, so pay careful attention to the logo when purchasing. ■ The maximum capacity of SD memo ry cards is 2GB. The maximum capacity of SDHC memory cards is 32GB. The max[...]

  • Page 64

    User ’s Manual 3-15 Hardware, Utilities and Options ■ The card is designed so that it can be inserte d only one way . Do not try to force the card int o the slot. ■ Do not leave a card partially inserted in the slot. Press the card until you hear it click into place. Memory card care ■ Set the write-protect switch to the lock position, if y[...]

  • Page 65

    User ’s Manual 3-16 Hardware, Utilities and Options Inserting a memory media Remo vin g a me mor y med ia The following instru ctions apply to all types of supported media device s. T o remove a memory media, follow the steps as detailed below: 1. Open the Safely Remove Hard ware and Eject Media icon on the Windows T askb ar . 2. Point to memory [...]

  • Page 66

    User ’s Manual 3-17 Hardware, Utilities and Options Removing memory media Additional mem ory modu le Y ou can install additional memory into the computer in order to increase the amount of system memory that is avai lable. This section describes how to install and remove optional memory modules. 1. Bridge media slot 2. Memory media 1 2 ■ Make s[...]

  • Page 67

    User ’s Manual 3-18 Hardware, Utilities and Options Installing a memory module T o install a memory module, follow the steps as detailed below: 1. Shut down the compu ter - make su re the Power indicator is off (refer to the T urning off the pow er section in Chapter 1, Getting Started if required). 2. Remove the AC ad aptor and all cable s and p[...]

  • Page 68

    User ’s Manual 3-19 Hardware, Utilities and Options 6. Slide your fingernail or a thin object under the cover and lift it off. Removing the memory module cover 7. Align the notch of the memory modul e with that of the memory slo t and gently insert the module in to the slot at about a 45 d egree angle before holding it down until the latches on e[...]

  • Page 69

    User ’s Manual 3-20 Hardware, Utilities and Options 8. Seat the memory module cover in place and secure it with the screws. Seating the memory module cover 9. Install the battery pa ck - refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes , if requ ired. 10. Turn your co mputer over . 1 1. T urn the computer on and [...]

  • Page 70

    User ’s Manual 3-21 Hardware, Utilities and Options 7. Push the latches away from the module in order to release it - a spring will force one end of the modul e up at an angle. 8. Grasp the module by its edges and remove it from the computer . Removing the memory module 9. Seat the memory module cover in place and secure it with the screw . 10. I[...]

  • Page 71

    User ’s Manual 3-22 Hardware, Utilities and Options External monitor An external analog monitor can be connected to the external mo nitor port on the computer . T o connect a monitor , follow the steps as detailed below: Connecting the monitor cable 1. T urn the computer's power off. 2. Connect the monitor cable to the external monitor port.[...]

  • Page 72

    User ’s Manual 3-23 Hardware, Utilities and Options eSA T A (External Serial A T A) An device corresponding to eSA T A function can be connected to the eSA T A/USB combo port on th e computer . Connecting the eSA T A device T o connect an eSA T A device, fol low the steps as detailed below: 1. Connect an eSA T A cable to the eSA T A/USB combo por[...]

  • Page 73

    User ’s Manual 3-24 Hardware, Utilities and Options 2. Click the Safely Remove Hardwa re and Eject Media icon on the Windows T askb ar . 3. Click an eSA T A device that yo u want to remove. 4. Carefully pull an eSA T A device's eSA T A/USB combo conne ctor out from within the computer's eSA T A/USB combo po rt. HDMI A HDMI monitor can b[...]

  • Page 74

    User ’s Manual 3-25 Hardware, Utilities and Options Settings for disp lay video on HDMI T o view video on the HDMI device, be sure to config ure the following settings otherwise you may find that nothing is displayed. Select HD Format T o select the display mode, follow the steps as detailed below: 1. Click Start and click Control Panel . 2. Clic[...]

  • Page 75

    User ’s Manual 3-26 Hardware, Utilities and Options Security lock A security locks enable you to ancho r your computer a desk or other heavy object in order to help prevent unautho rized removal or theft. The computer has a security lock slot on its left side into which you can attach one end of the security cable, while the other end attaches to[...]

  • Page 76

    User ’s Manual 3-27 Hardware, Utilities and Options Optional accessories Y ou are able to add a number of options and accessor ies in order to make your computer even more powerful and convenient to use . For reference, the following list details some of the items that are avai labl e from your reseller or TOSHIBA dealer: DDR3-1066/1333/1600 Memo[...]

  • Page 77

    User ’s Manual 4-1 Operating Basics Chapter 4 Operating Basics This chapter describes the basic operations of your computer , highlights the precautions that should be taken when using it. Using the T ouch Pad T o use the T ouch Pa d, simply touch and move your fingerti p across it in the direction you want the on-screen pointer to go. T ouch Pad[...]

  • Page 78

    User ’s Manual 4-2 Operating Basics T ouch Pad Gestu re There are four convenient gestures th at make u sers operate the system easier and faster . In the Mouse Prop erties you can enable/disable these functions. ChiralMotion Y ou can scroll vertica lly and horizontal ly . T o enable these features, se lect the Enable vertical scrolling and En ab[...]

  • Page 79

    User ’s Manual 4-3 Operating Basics Momentum The Momentum feature del ivers smooth, fa st, trackball-l ike mouse movement. One quick flick of the finge r on the T ouchPad surface can mo ve the cursor across the entire comput er scree n. Momentum reduces the repetitive motion and fatigue associated with moving the cursor long distances, while prov[...]

  • Page 80

    User ’s Manual 4-4 Operating Basics Using the T OSHIBA Face Recognition TOSHIBA Face Recognition uses a face verificati on library to verify the face data of users when they log in to Windows. The user can thus avoid having to enter a password or the like, which makes the login process easier . ■ Do not point the web camera directl y at the sun[...]

  • Page 81

    User ’s Manual 4-5 Operating Basics Disclaimer T oshiba does not guarantee that the face recogni tion utility technology will be completely secure or error-free. T oshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. T oshiba is not liable for any failure or damage th at might ari[...]

  • Page 82

    User ’s Manual 4-6 Operating Basics 7. Perform the verifica tion test. Face the screen as you do w hen you register . ■ If verification fails, click the Back button and re-register . Please refer to step 6 from step 4. 8. If verification is successful, click the Next button and register an account. 9. Register the account. Fill in all the field[...]

  • Page 83

    User ’s Manual 4-7 Operating Basics 1:N Mode Login screen 1. T u rn on the comput er . 2. The Select Tiles screen will be displaye d. 3. Select St art face recognition () . 4. " Please face the camera " will be displayed. 5. V erification will be performed. If the authentication is successful, the image data taken in step 4 will be fade[...]

  • Page 84

    User ’s Manual 4-8 Operating Basics Loading discs T o load a disc, follow the steps as detailed below: 1. When the computer ’s power is on, press the eject button to open the disc tray slightly . 2. Grasp the disc tray gently and pull until it is fully op ened. Pressing the eject button and pulling the disc tray open 3. Lay the disc, label side[...]

  • Page 85

    User ’s Manual 4-9 Operating Basics 4. Press gently at the center of the disc until you feel it click into place. T he disc should li e below the top of the spindle, flu sh with the spindl e base. 5. Push the center of the disc tray to close it. Press gently until it locks into place. Closing the disc tray Removing discs T o remove the disc, foll[...]

  • Page 86

    User ’s Manual 4-10 Operating Basics Removing a disc 3. Push the center of the disc tray to close it. Press gently until it locks into place. How to rem ove discs w hen the disc tray will not op en Pressing the eject button will not open the disc tray when the computer power is off. If the power is off, you can open the disc tray by inserting a s[...]

  • Page 87

    User ’s Manual 4-1 1 Operating Basics W riti ng CD/DVD/BDs Y ou can use the BD-Combo/BD-W riter dr ive to write dat a to either CD-R, CD-RW , DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DVD+R (Doub le Layer), DVD+RW , DVD-RAM, BD-R, BD -R (Dual Layer), BD-RE or BD-RE (Dual Layer) discs. Y ou can use the DVD Super Multi drive to write data to eithe[...]

  • Page 88

    User ’s Manual 4-12 Operating Basics Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R, CD -RW , DVD-R, DVD-R (D ual Layer), DVD-RW , DVD+R, DVD+R (Double Layer), DVD+RW , DVD-RAM, BD-R , BD-R (Dual Layer), BD-RE or BD-RE (Dual Layer) disc that may be caused by writing or rewriting with this product. ■ An[...]

  • Page 89

    User ’s Manual 4-13 Operating Basics Before writing or rewriting with the DVD S uper Mu lti drive ■ Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD- R, CD-RW , DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DVD+R (Double Layer), DVD+RW or DVD- RAM media, however , it must be not ed that disc quali[...]

  • Page 90

    User ’s Manual 4-14 Operating Basics ■ If the disc is poor in quality , or is dirty or damaged, wr i ting or rewriting errors may be noted - ensure that you check a ll discs for dirt or damage before you use them. CD-RW : (Ultra-S peed) MITSUBISHI KAGAKU MEDIA CO., L TD. DVD-R: DVD Sp ecificat ions for Reco rdab le Disc for General V ersion 2.0[...]

  • Page 91

    User ’s Manual 4-15 Operating Basics ■ The actual number of rewrites to CD-RW , DVD-RW , DVD+R W , DVD- RAM or BD-RE media will be affected by the quality of the disc itself and the way in which it is used. ■ There are two types of DVD-R media available, au thoring discs and general use discs. Do not attemp t to use authoring discs as only ge[...]

  • Page 92

    User ’s Manual 4-16 Operating Basics ■ CD-RW (Ultra S peed +) media shoul d not be used as data may be lost or damaged. ■ Y o u should always write from the com puter's hard disk drive onto the CD/DVD - do not try to write from sh ared devices such a s a server or any other network device. ■ Writing with software other than T OSHIBA Di[...]

  • Page 93

    User ’s Manual 4-17 Operating Basics TOSHIBA Disc Creator Please be aware o f the follow ing limitations when you use the TOSHIBA Disc Creator: ■ DVD Video cannot be created using TOSHIBA Disc Creator . ■ DVD Audio cannot be created using TOSHIBA Disc Creator . ■ Y o u cannot use TOSHIBA Disc Creator's "Audio CD" functio n to[...]

  • Page 94

    User ’s Manual 4-18 Operating Basics Data V erification T o verify that data has been written or rewritten correctly to a data CD/DVD you should follow the steps below before you begin the write/rewri te process: 1. Display the setting dial og box by one of the following two steps: ■ Click the Recording settings button ( ) for writing on the ma[...]

  • Page 95

    User ’s Manual 4-19 Operating Basics 5. After choosing the menu template, click the Nex t button to go to the Burning Page . 6. Choose the output type and then click the Burn bu tton. How to learn more about Corel DVD MovieFactory Please refer to the Help and Ma nual files for additional Corel DVD MovieFactory information. ■ Opening the Corel D[...]

  • Page 96

    User ’s Manual 4-20 Operating Basics ■ Operate the computer for any other function, including using a mouse or T ouch Pad, or closing/openin g the display panel. ■ Bump or cause vibration to the computer. ■ Use the Mode control button and Audio/Video control button to reproduce music or voice. ■ Open the DV D drive. ■ Install, remove or[...]

  • Page 97

    User ’s Manual 4-21 Operating Basics ■ WinDVD BD for TOSHIBA supports AACS (Advanced Accesss Control System) copy protection technolog y . Renewal of the AACS key integrated into this product is required for uninterrupted enjo yment of Blu-ray Disc. An Internet connection is required for renewal. AACS key renewal is provided free of charge for [...]

  • Page 98

    User ’s Manual 4-22 Operating Basics Operating W inDVD B D for T OS HIBA Notes on Using WinDVD BD for T OSHIBA. 1. Screen display and available features may vary a mongst BD Videos and scenes. 2. If the menu is opened in the Di splay Area usi ng the Control window's T op Menu or Menu buttons, touch pad and mouse menu operations may not be ab[...]

  • Page 99

    User ’s Manual 4-23 Operating Basics Sound System This section describes some of the audio control functions. Adjusting System V olume Y ou can control th e overall level of so und using Windows V olume Mixer . T o launch V olume Mixer , follow the steps below . 1. Right-click the Speakers icon on the T askbar . 2. Select Open V olume Mixer from [...]

  • Page 100

    User ’s Manual 4-24 Operating Basics Opening SmartAudio Help Click " ? " in the top right corner of t he SmartAudio window will ope n the Help file in your sele cted language, or in English i f your selected lan guage is not supported. Dolby Advanced Audio * *Is preinstalled with some models Dolby Advanced Audio provides a stun nin g li[...]

  • Page 101

    User ’s Manual 4-25 Operating Basics Notes on Using the M icrophone Y ou can use the b uilt-in or an external mi crophone that co nnects to the microphone jack to record monaural sounds into your appl ications. It can also be used to issue voice commands to applications that support such functions (built-in microphone is provided with some models[...]

  • Page 102

    User ’s Manual 4-26 Operating Basics Wireless LAN The Wireless LAN is compatible wit h other LAN systems based on Direct Sequence S pread S pectru m/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE802.1 1 Wireless LAN standard. ■ Frequency Channel Sele ction of 5GHz for IEEE 8 02.1 1a or/and IEEE802.1 1n ?[...]

  • Page 103

    User ’s Manual 4-27 Operating Basics Bluetooth wireless te chnology Bluetooth wireless technology el iminates the need for cables, such as desktop computers, between your PC and other electronic devices, example of printers and mobile phones. Y ou cannot use the computer's built-in Bluetooth functions and an external Bluetooth adaptor simul [...]

  • Page 104

    User ’s Manual 4-28 Operating Basics Release Notes related to th e Bluetooth S tack for W indows by TOSHIBA 1. Fax application software: Please be aware that there is some fax application software that you cannot use on this Bluetoo th S t ack. 2. Multi-us er considerat ions: The use of Bluetooth is not supported in a multi-user environment. This[...]

  • Page 105

    User ’s Manual 4-29 Operating Basics LAN The computer has built-in suppo rt for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LA N (1000 megabits per second, 1000BASE-T). This section describes how to connect/disconn ect to a LAN. LAN cable types If you are using Giga[...]

  • Page 106

    User ’s Manual 4-30 Operating Basics Connecting the LAN cable T o connect the LAN cable, foll ow th e steps as detailed below: 1. T urn off the power to the computer and to all external devices connected to the computer . 2. Plug one end of the cable into t he LAN jack. Press gently until yo u hear the latch click into place. Connecting the LAN c[...]

  • Page 107

    User ’s Manual 4-31 Operating Basics Computer Ha ndling This section explains computer han dling and maintenance. Cleaning the compu ter T o help ensure long, troub le-free oper ation, keep the computer free o f dust and dirt, and u se care with a ll liquids arou nd it. ■ Be careful not to spill liquids into the comp uter . If th e computer doe[...]

  • Page 108

    User ’s Manual 4-32 Operating Basics Heat dispersal T o protect against overheating, the processor is equipped with an internal temperature sensor which activates a co oling fan or lowers the processin g speed if the computer's internal temper ature rises t o a cert ain le vel. Y ou are able to select wh ether to control this temperature by [...]

  • Page 109

    User ’s Manual 5-1 The Keyboard Chapter 5 The Keyboard The computer ’s keyboard layouts ar e compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhance d keyboard functions can be performed on the computer . The number of keys available on your keyboard will depend on which country/reg[...]

  • Page 110

    User ’s Manual 5-2 The Keyboard Function keys: F1 … F9 The function keys (not to be confused with the special FN key) are the twelve keys at the top of your key board - these keys function differentl y from other keys. F1 through F9 are called function keys because they execute programmed functions when pressed and, wh en used in combination wi[...]

  • Page 111

    User ’s Manual 5-3 The Keyboard Hot keys Hot keys (pressing FN + a functi on or ESC key) let you enable or disable certain features of the computer . Mute: Pressing FN + ESC turns the volume on and off. Lock: Pressing FN + F1 enters ''Lock computer mo de''. T o restore you r desktop, you need to log on again. Power Plan: Press[...]

  • Page 112

    User ’s Manual 5-4 The Keyboard Brightness Up: Pressing FN + F7 increases the computer's display panel brightness in individual steps. Wireless: Pressing FN + F8 switches the active wireless devices. T ouch Pad: Pre ssing FN + F9 enables o r disables the T ouch Pad function. Zoom: Pressing FN + Sp ace changes the display resolution. TOSHIBA [...]

  • Page 113

    User ’s Manual 5-5 The Keyboard FN S ticky key Y ou can use the TOSHIBA Accessi bility Utility to make the FN key sticky , that is, you can press it once, release it, and then pres s an " F Number " key . T o start the TOSHIBA Accessibility utility , click Star t  All Programs  TOSHIBA  Utilities  Accessibility . Windows spe[...]

  • Page 114

    User ’s Manual 6-1 Power and Power-Up Modes Chapter 6 Power and Power-Up Modes The computer's powe r resources include the AC adaptor , battery pack and any internal batteries. This chapter provides details on making the most effective use of these resources, and includes informatio n on charging and changing batteries, tips for saving batte[...]

  • Page 115

    User ’s Manual 6-2 Power and Power-Up Modes T able 6-1 Power conditions Monitoring of power condition As shown in the below table, the Battery , DC IN and Power indicators on the system indicator alert you to the computer ’s operating capability and battery charge status. Battery indicator Check the Battery indicator to determine the status of [...]

  • Page 116

    User ’s Manual 6-3 Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine t he power status with the AC adaptor connected - the follow ing indi cator conditions shou ld be noted: Power i ndica tor Check the Power indicator to determine the pow er status of the computer - the following indicator conditions shou ld be noted[...]

  • Page 117

    User ’s Manual 6-4 Power and Power-Up Modes Real Time Clock (RTC) battery The Real Time Clock (RTC) battery provides power fo r the internal real time clock and calendar function and also main tains the system configuration while the computer is turned off. If the R TC battery becomes completely discharged, th e system will lose this in formation[...]

  • Page 118

    User ’s Manual 6-5 Power and Power-Up Modes Charging the batteries When the power in the battery pack becomes low , the Battery indicator will flash amber to indicate that only a fe w minutes of battery power remain. If you continue to u se the computer w hile the Ba ttery indicator flashes, the computer will enable Hibernation Mode so that you d[...]

  • Page 119

    User ’s Manual 6-6 Power and Power-Up Modes Tim e Refer to User Information Guide about Char ging time. Battery charging notice The battery may not begin charging immediately under the following conditions: ■ The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at all). T o ensure the battery charges to its[...]

  • Page 120

    User ’s Manual 6-7 Power and Power-Up Modes Maximizing battery op erating time A battery's usefulness depends on how long it can su pply power on a single charge, while how long the c harg e lasts in a battery depends on: ■ Processor speed ■ Screen bright ness ■ System Sleep Mode ■ System Hibernation Mode ■ Display power off period[...]

  • Page 121

    User ’s Manual 6-8 Power and Power-Up Modes ■ If you have extra battery p acks, rotate their use. ■ If you will not be using the system for an extended period, for example for more than one month, remove th e battery pack from the computer . ■ S tore spare battery pa cks in a cool dry place out of direct sunlight. Replacing the b attery p a[...]

  • Page 122

    User ’s Manual 6-9 Power and Power-Up Modes Releasing the battery pack Installing the battery pack T o install a battery pack, follow the steps as det ailed below: 1. Insert the battery pack as far as it will go into the computer . 2. Ensure that the battery pack is securely in place and the battery lock is in its lock ( ) position. Securing the [...]

  • Page 123

    User ’s Manual 6-10 Power and Power-Up Modes Password Utility The password utility allows you to mainta in an addi tional level of security and provides two levels of password security: User and Supervisor . User Password T o start the utility , point to or click the following items: Star t  All Programs  TO S H IB A  Utilities  T OSH[...]

  • Page 124

    User ’s Manual 6-1 1 Power and Power-Up Modes 3. Press ENTER . Power-up modes The computer has three differ ent power-up modes as follows: ■ Shut Down Mode: T he computer will s hut d own without saving data - in view of this you must always save your work before you turn the computer of f. ■ Hibernation Mode: Data in memory will be saved to [...]

  • Page 125

    User ’s Manual 7-1 HW Setu p Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup program to configure your computer , and provides information on settings for various functions. Accessing HW Set up T o run the HW Setup progra m, click Star t  All Program s  TOSH IB A  Utilities  HWSetup . HW Setup window The HW Se[...]

  • Page 126

    User ’s Manual 7-2 HW Setu p Password This option allows you to set or reset the user password for power on. User Password Lets you register a new password or change/remove an existing password. T o enter a user password: 1. Select Registered to displa y the following prompt: Enter Password: Enter a password of up to 10 characters. The character [...]

  • Page 127

    User ’s Manual 7-3 HW Setu p Display This tab lets you customize your computer’s display settings for either the internal display or an external monitor . Power On Display This tab allows you to select the display to be used when the computer is started. Please note that this setting is only available on standard VGA mode and is not available a[...]

  • Page 128

    User ’s Manual 7-4 HW Setu p Y ou can override the setti ngs and manually sel ect a boot device by pressing one of the following keys while the compute r is booting: * In this computer , CD-ROM refers to the DVD Super Multi driver , BD-Combo drive or BD-Writer drive. T o change the boot drive, follow the steps below . 1. Hold down F12 and boot th[...]

  • Page 129

    User ’s Manual 7-5 HW Setu p LAN Wake-up on LAN This feature lets the comp uter's power be turned on from shutdown when it receives a wake-up p acket (Magic p acket) from the LAN. Power will be automatically turn ed on when a signal is received from an administrator's computer whic h is connected via a network. The following settings ca[...]

  • Page 130

    User ’s Manual 7-6 HW Setu p SA T A eSA T A This feature a llows you to set conditions for SA T A. SA T A Interface setting This feature allo ws you to set SA T A interface setting. Enabled Enables the eSA T A port. (Default) Disabled Disables th e eSA T A port in order to save power . Performance Let HDD/SSD work with maxi mum perfor mance. (Def[...]

  • Page 131

    User ’s Manual 8-1 T roubleshooting Chapter 8 T roubleshooting TOSHIBA have designed this computer for durability , however , should problems occur you are able to use the procedures detailed in this chapter to help determi ne the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems fr[...]

  • Page 132

    User ’s Manual 8-2 T roubleshooting ■ Make sure all optional accessories are configured properly in the computer's setup program and tha t all required driver software has been loaded (please refer to the documentation included with th e optional accessories fo r further information on its inst allation and configuration). ■ Check all ca[...]

  • Page 133

    User ’s Manual 8-3 T roubleshooting Hardware and system checklist This section discusses problems ca used by your computer ’s hardware or attached peripherals. Basic problems may oc cur in the following areas: Sof tware The problems may be caused by your software or disk. If you cannot load a software package, the media may be damaged or the pr[...]

  • Page 134

    User ’s Manual 8-4 T roubleshooting System start- up When the computer does not start pr operly , check the following items: ■ Self T est ■ Power Sources ■ Power-on Password Self test While booting up the computer , self te st is executed aut omatical ly and the TOSHIBA logo is displayed on the screen. This message remains on the screen for[...]

  • Page 135

    User ’s Manual 8-5 T roubleshooting AC power If you have trouble turning on the comp u ter with the AC adaptor connected you should check the status of the DC IN indicator . Please refer to Chapter 6, Power an d Power-Up Modes for further information. Battery If you suspect a problem with the battery , you should check the status of the DC IN ind[...]

  • Page 136

    User ’s Manual 8-6 T roubleshooting Check whether the battery is hot or cold to the touch - if so, it will not charge properly and should be allowed to reach room temperature before you try again. Unplug the AC adap tor and remove the battery to make sure its connecting terminals are clean - if necessary wipe them with a soft dry cloth lightly di[...]

  • Page 137

    User ’s Manual 8-7 T roubleshooting Real Time Clock Keyboard Keyboard problems can be caused by the setup and conf iguratio n of the computer - please refer to Chapter 5, The Keyboard for further information. Internal display p anel Apparent computer's display pane l problems may be related to the computer's setup and configuration - pl[...]

  • Page 138

    User ’s Manual 8-8 T roubleshooting Hard disk drive Markings appear on the computer's display panel. These marks may have co me from contact with the keyboard and T ouch Pad whi le the display panel has been closed. Y ou should try to remove the marks by gently wiping the display panel with a clean dry cloth or , if this fails, with a good q[...]

  • Page 139

    User ’s Manual 8-9 T roubleshooting DVD Supe r Multi drive For more inform ation, refer to Chapter 4, Operating Basics . BD drive For more inform ation, refer to Chapter 4, Operating Basics . Problem Procedure Y o u cannot access a CD/DVD in the drive Make sure the drive’ s disc tray is securely closed. Press gently unt il it clicks into place.[...]

  • Page 140

    User ’s Manual 8-10 T roubleshooting Open the disc tray and make sure the CD/DVD/BD is properly se ated. It sh ould lie flat with the label facin g up. A foreign object in the disc tray cou ld block laser light from reading the CD/DVD/BD. Make sure there is no obstruction. Remove any foreign object. Check whether the CD/DVD/BD is dirty . If it is[...]

  • Page 141

    User ’s Manual 8-1 1 T roubleshooting Memory Cards: SD/SDHC/SDXC Card , Memory Stick/Memory Stick PRO, MultiM ediaCard For further information, please refer to Chapter 3, Hardware, Utilities and Options . Cannot write correctly If you have trouble in writing, make sure you have taken the following precautions: Use only media recommended b y TOSHI[...]

  • Page 142

    User ’s Manual 8-12 T roubleshooting Pointing device If you are using a USB mouse, you should also refer to both the USB device section in this chapter , and the documentation supplied with your mouse. T ouch Pad Problem Procedure The T ouch Pa d does not wor k. Check the Device Select settings. Click St ar t  Control Pane l .Select Large ic o[...]

  • Page 143

    User ’s Manual 8-13 T roubleshooting USB mouse The reacti on of T ouch pad is either too sensitive or not sensitive enough. Adjust the touch Sensitivity . 1. Click Star t  Control Panel .Se lect Large icons or Small icons in Vie w b y , and then click Mouse . 2. Within the Mouse Properties window , click the Device Settings tab. . 3. Click the[...]

  • Page 144

    User ’s Manual 8-14 T roubleshooting USB device In addition to the information in this section, p lease also refer to the documentation supplied with yo ur USB device. The on-screen pointer moves too fast or too slow In this instance, you should initially try changing the speed setting withi n t he Mouse Control utility . 1. T o access this utili[...]

  • Page 145

    User ’s Manual 8-15 T roubleshooting eSA T A device In addition to the information in this section, p lease also refer to the documentation supplied with your e SA T A device. Sound system In addition to the information in this section, p lease also refer to the documentation supplied with your a udio device. Problem Procedure eSA T A device does[...]

  • Page 146

    User ’s Manual 8-16 T roubleshooting External monitor Please also refer to Chapter 3, Hardware, Utilities and Options , and to the documentation supplied with your monitor for further information. Annoying sound is heard In this instance you may be experiencing feedback from eith er the internal microp hone or an external microphone connected to [...]

  • Page 147

    User ’s Manual 8-17 T roubleshooting LAN Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics . Display error occurs Check th at the cable connecting the external monitor to the computer is firmly attached. If you [...]

  • Page 148

    User ’s Manual 8-18 T roubleshooting Bluetooth For further information on Bluetooth wire less communication, please refer to Chapter 4, Operating Basics . T OSHIBA support If you require any additional help using your compu ter or if you are having problems operating the computer, you may need to cont act T OSHIBA for additional techni cal assist[...]

  • Page 149

    User ’s Manual A-1 S pecifications Appendix A S pecifications This appendix summarizes the computer ’s technical specifications. Environmental Requirements Power Requirements Conditio ns Ambient temperature Relative humidity Operating 5°C (41°F) to 35°C (95°F) 20% to 80% (noncondensing) Non-operating -20°C (-4°F) to 60°C (140°F ) 10% to[...]

  • Page 150

    User ’s Manual B-1 Display Controller and Video mode Appendix B Display Controller and V ideo mode Display controller The display controller in terprets software commands into hardware commands that turn particular parts on the screen on or of f. The display controller al so controls the video mode and uses industry standard rules to govern the s[...]

  • Page 151

    User ’s Manual C-1 Wireless LAN Appendix C Wireless LAN This appendix is intended to hel p you get your Wireless LAN network up and running, with a mi nimum of parameters. Card S pecifications Radio Characteristics Radio Charact eristics of Wireless LAN mo dule may vary accordin g to: ■ Country/region where the product was purcha sed ■ T yp e[...]

  • Page 152

    User ’s Manual C-2 Wireless LAN The range of the wireless signal is relate d to the transmit rate of the wireless communication. Communications at lower transmit range may travel large r dist ances. ■ The range of your w ireless devices can be affected when the antennas are placed near metal surfaces and solid h igh-density materials. ■ Range[...]

  • Page 153

    User ’s Manual C-3 Wireless LAN ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN module will automatically start operation at the ch annel identified by the Wireless LAN Ac cess Point. When roamin g between different access points the station can dynamically switch to another channel if requ ired. ■ For W[...]

  • Page 154

    User ’s Manual C-4 Wireless LAN *1 Factory-set default channels *2 The channel which can be used depends on th e installed wireless LAN module. And the approved channels o n using are different at ea ch country or region. When using these channels in any coun try or region, refer to the section Approved Countries/Regio ns for use in the printed m[...]

  • Page 155

    User ’s Manual D-1 Bluetooth wireless technology Interoperability Appendix D Bluetooth wireless technology Interoperability Bluetooth Adaptor from TOSHIBA ar e designed to be interoperable with any product with Bluetooth wireless te chnology that is based on F requency Hopping S pread S pectrum (FHSS) radio technology , a nd is compliant to: ■ [...]

  • Page 156

    User ’s Manual D-2 Bluetooth wireless technology Interoperability Bluetooth w ireless techno lo gy and your Health The products with Bluetooth wireless te chnology , like other radio devices, emit radio frequency electromagnetic energy . The level of energy emitted by devices with Blu etooth wireless technology howeve r is far much less than the [...]

  • Page 157

    User ’s Manual E-1 AC Power Cord and Connectors Appendix E AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Certification agencies In Eur[...]

  • Page 158

    User ’s Manual E-2 AC Power Cord and Connectors For the United S tates and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three p in plug configuration must be 6-15P (250V) or 5-15P (125V) as design ated in the U.S. Nati onal Electrical code handbook and the Canadian Electrical Co de Part II. The following illustra [...]

  • Page 159

    User ’s Manual F-1 TOSHIBA PC Health Monitor Appendix F T OSHIBA PC Health Monitor The TOSHIBA PC Health Monitor application proactively monitors a number of system functions such as power consumption, battery health and the system cooling, in forming you of significant system conditions. This application recognizes the system and individu al com[...]

  • Page 160

    User ’s Manual F-2 TOSHIBA PC Health Monitor St arting the TOSHIBA PC Health Mo nitor The TOSHIBA PC Health Monitor can be started using the following methods: ■ Click Start  All Programs  TO SH IB A  Utilities  PC Health Monitor . ■ Click the icon ( ) in the notif ication area, then cli ck the " Enable PC Health Monitor... &[...]

  • Page 161

    User ’s Manual G-1 Legal Footnotes Appendix G Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. Non-applicable Icons Certain computer chassis are design ed to accommodate all possible configurations for an entire product se ries. Therefore, please b e aware that your selected model may not have a[...]

  • Page 162

    User ’s Manual G-2 Legal Footnotes Under some conditions, your computer product may automatically shut- down. This is a normal protective feat ure designed to reduce the risk of lost data or damage to the product when used outside recommended conditions. T o avoid risk of lost data, always make back-up copies of data by periodically storing it on[...]

  • Page 163

    User ’s Manual G-3 Legal Footnotes Hard Disk Dri ve (HDD) Cap acity One Gigabyte (GB) means 10 9 = 1,000,0 00,000 bytes using powers of 10. The computer operating system, howe ver , reports storage capacity using powers of 2 for the definition of 1 GB = 2 30 = 1,073,741,824 bytes, and therefore shows less storage capacity . Available storage capa[...]

  • Page 164

    User ’s Manual H-1 Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Appendix H If your computer is stolen Should your comput er be stolen , however , we’ll help you try to find it. Before contacting TOSHIBA, please prepare the follo wing informati on which is necessary to uniquely identi fy your computer: ■ In which co untry [...]

  • Page 165

    User ’s Manual H-2 Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH T echnical Servi ce and Support Blumenstrasse 26 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Owner ’s d etai ls Country stolen: Machine type: (e.g. Satellite L650/ L655/L650D/L655D / Satellit[...]

  • Page 166

    User ’s Manual Glossa ry-1 Glossary Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference. Abbreviations AC: Alternating current ACPI: Advanced Configuration and Power Interface AMT : Intel Active Management T echnology ASCII: American S tandard Code for Information Interchange BD-R: [...]

  • Page 167

    User ’s Manual Glossa ry-2 Glossary FDD: floppy d iskette drive FIR: fast infrared GB: gigabyte HDD: hard disk drive HDMI: High-Definition Multimedia Interface IDE: integr ated dri ve elect ronics IEEE: Institute of Electrical and Electronics Engineers I/O: input/ output IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crys[...]

  • Page 168

    User ’s Manual Index-1 Index Index A AC adaptor 3-3 additional 3-27 connecting 1-3 DC IN 19V jack 2-5 ASCII characters 5-5 B Battery charging 6-5 extending life 6-7 indicator 2-9, 6-2 monitoring capaci ty 6-6 real time clock 3-2, 6-4 save mode 3-7 types 6-3 Battery pack 2-5, 3-2 replacing 6-8 BD drive problems 8-9 Bluetooth 3-6, 4-27 Bluetooth St[...]

  • Page 169

    User ’s Manual Index-2 Index F FN + 1 (TOSHIBA Zooming Utility reduce) 5-4 FN + 2 (TOSHIBA Zooming Utility enlarge) 5-4 FN + ESC (Mute) 5-3 FN + F1 (Lock) 5-3 FN + F2 (Power Plan ) 5-3 FN + F3 (Sleep) 5-3 FN + F4 (Hibernate) 5-3 FN + F5 (Ou tput) 5-3 FN + F6 (Brightness Down) 5-3 FN + F7 (Brightness Up) 5-4 FN + F8 (Wireless) 5-4 FN + F9 (Touch P[...]

  • Page 170

    User ’s Manual Index-3 Index Modem jack 2-2 Moving the comput er 4-31 MultiMediaCard 3-13 P Password power on 3-7 Starting the computer by 6- 10 Pointing Device Touch Pad 8-12 Power conditions 6-1 Hibernation Mode 1-10 indicators 6-2 panel on/off 3-7, 6-11 Shut Down mode (Boot Mode) 1-8 Sleep Mode 1-8 System Auto Off 6- 11 turning off 1-8 turning[...]

  • Page 171

    User ’s Manual Index-4 Index W Web Camera 2-8, 3-5, 4-3 Video mode B-1 Video RAM 3-2 Wireless communication 4-25 indicator 2-10, 4-28 Wireless LAN 3-6, 4-26 problems 8-17 USB device problems 8-14 Using WinDVD BD for TOSHIBA 4-20 Utilities and Applications 3-9[...]