Toshiba E205 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Toshiba E205, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Toshiba E205 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Toshiba E205. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Toshiba E205 should contain:
- informations concerning technical data of Toshiba E205
- name of the manufacturer and a year of construction of the Toshiba E205 item
- rules of operation, control and maintenance of the Toshiba E205 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Toshiba E205 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Toshiba E205, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Toshiba service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Toshiba E205.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Toshiba E205 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Satellite/E200/E205 Maintenance Manual Toshiba Personal Computer Satellite E200/E205 (PSE20) (PSE25) Maintenance Manual TOSHIBA CORPORATION S/ No[...]

  • Page 2

    ii Satellite/E200/E205 Maintenance Manual Copyright © 2009 by Toshiba Corporation. All rights reserv ed. Under the copyright laws, this manual cannot be reproduced in any form without the pr ior written perm ission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained herein. Toshiba Satellite E200/E205 M[...]

  • Page 3

    Satellite/E200/E205 Maintenance Manual iii Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite E200/E205, referred to as Satellite E200/E205 in this manual. The procedures described in this manual are intended to help service technicians isolate faulty Field Replaceable U[...]

  • Page 4

    iv Satellite/E200/E205 Maintenance Manual The manual is divided into the following parts: Chapter 1 Hardware Overview describe s the Satellite E200/E205 system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Chapter 3 Test and Diagnostics describe s how to perform test and diagnostic operat[...]

  • Page 5

    Satellite/E200/E205 Maintenance Manual v Conventions This manual uses the following form ats to describe, identify, and highlight terms and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition. For example: Read Only Memory (ROM) Keys Keys are[...]

  • Page 6

    vi Satellite/E200/E205 Maintenance Manual Table of Contents Chapter 1 Hardware Overview 1.1 Features .............................................................................. Error! Bookmark not defined. 1.2 System Unit Components .................................................. Error! Bookmark not defined. 1.3 2.5-inch HDD .................[...]

  • Page 7

    Satellite/E200/E205 Maintenance Manual vii Procedure 5 Connector Check and Replacement Check..... Error! Bookmark not defined. 2.6 Keyboard .................................................................. Error! Bookmark not defined. Procedure 1 Test Program Check ......................... Error! Bookmark not defined. Procedure 2 Connector Check [...]

  • Page 8

    viii Satellite/E200/E205 Maintenance Manual Chapter 3 Diagnostic Programs 3.1 General ..................................................................... Error! Bookmark not defined. 3.2 Quick Start ................................................................ Error! Bookmark not defined. 3.2.1 Quick Test ......................................[...]

  • Page 9

    Satellite/E200/E205 Maintenance Manual ix 3.6 Memory Test ............................................................ Error! Bookmark not defined. 3.7 Storage ...................................................................... Error! Bookmark not defined. 3.8 Video ........................................................................ Error! [...]

  • Page 10

    x Satellite/E200/E205 Maintenance Manual Installing the Bottom Cover ................................... Error! Bookmark not defined. 4.5 Display Assembly .................................................... Error! Bookmark not defined. Removing the Display Assembly........................... Error! Bookmark not defined. Installing the Display Asse[...]

  • Page 11

    Satellite/E200/E205 Maintenance Manual xi Installing the Speakers ........................................... Error! Bookmark not defined. 4.15 Switch Board and Finger Print Board ...................... Error! Bookmark not defined. Removing Switch Board and Finger Print Board .. Error! Bookmark not defined. Installing Switch Board and Finger Print [...]

  • Page 12

    xii Satellite/E200/E205 Maintenance Manual Appendices Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout .................................................................................................B-1 Appendix C Pin Assignments..............................[...]

  • Page 13

    Chapter 1 Hardware Overview[...]

  • Page 14

    1 Hardware Overview ii Satellite/E200/E205 Maintenance Manual[...]

  • Page 15

    1 Hardware Overview Satellite/E200/E205 Maintenance Manual iii Chapter 1 Contents 1.1 Features ................................................................................................................... ............ 5 1.2 System Unit Components .................................................................................................[...]

  • Page 16

    1 Hardware Overview iv Satellite/E200/E205 Maintenance Manual Figures Figure 1-1 ID Parts Description Placement ............................................................................... 9 Figure 1-2 Computer Block Diagram ...................................................................................... 10 Figure 1-3 System Board Configur[...]

  • Page 17

    1.1 Features 1 Hardware Overview Satellite/E200/E205 Maintenance Manual 5 1.1 Features Toshiba Satellite E200/E205 is a full size note book PC based on the mobile Intel Arrandale Processor, providing high-speed processing capab ilities and advanced features. The computer employs a Lithium Ion battery that allows it to be battery-operated for a long[...]

  • Page 18

    1 Hardware Overview 1.1 Features 6 Satellite/E200/E205 Maintenance Manual  4096 MB (512M  64) / DDR3-1066MHz  Hard Disk Drive (HDD) The computer accomm odates 2.5-inch 9.5mm height Serial ATA HDD with following storage capacities:  160 GB (9.5mm thick) SATA (5,400rpm )  250 GB (9.5mm thick) SATA (5,400rpm )  320 GB (9.5mm thick) S[...]

  • Page 19

    1.1 Features 1 Hardware Overview Satellite/E200/E205 Maintenance Manual 7 Realtek ALC272 integrated audio controller supports multimedia. The sound system contains the following:  Stereo speakers  Headphone / SPDIF combo jack  Internal microphone  External microphone jack  Keyboard 30 kinds’ countries keyboard, which is Toshiba B5 [...]

  • Page 20

    1 Hardware Overview 1.1 Features 8 Satellite/E200/E205 Maintenance Manual  Bridge Media Slot This slot is for your memory card require m ents like SD, Mini-SD, SD-IO, MS, MS Pro, MMC and XD Cards to provide memory card read on your com puter.  Webcam (BTO) The computer has an internal camera. It supports VGA (640x480) without Macro module. ?[...]

  • Page 21

    1.1 Features 1 Hardware Overview  Figures 1-1/1-2/1-3 and 1-4 show the com puter and its system unit configuration, respectively. Figure 1-1 ID Parts Description Placement Satellite/E200/E205 Maintenance Manual 9[...]

  • Page 22

    1 Hardware Overview 1.1 Features Figure 1-2 Computer Block Diagram 10 Satellite/E200/E205 Maintenance Manual[...]

  • Page 23

    1.1 Features 1 Hardware Overview Figure 1-3 System Board Configurations Satellite/E200/E205 Maintenance Manual 11[...]

  • Page 24

    1 Hardware Overview 1.2 System Unit Components 1.2 System Unit Components Figure 1-4 is Block Diagram of the System Unit. Figure 1-4 System Unit Block Diagram 12 Satellite/E200/E205 Maintenance Manual[...]

  • Page 25

    1.2 System Unit Components 1 Hardware Overview Satellite/E200/E205 Maintenance Manual 13 The system unit of the computer consists of the following com ponents:  Processor: Mobile Intel Arrandale Processor.  Intel Core I5 Processor (FSB, 1066MHz)  Core Speed: 2.40 GHz  System Bus: 1066 MHz  On-Die Level 2 Cache: 3 MB   Intel Cor[...]

  • Page 26

    1 Hardware Overview 1.2 System Unit Components 14 Satellite/E200/E205 Maintenance Manual  Integrated Serial ATA (SATA) Host Controller  Intel High Definition Audio Controller  Simple Serial Transport (SST) 1.0 Bus  Platform Environmental Control Interface (PECI)  Universal Serial Bus (USB) Controller  Integrated Gigabit LAN Contro[...]

  • Page 27

    1.2 System Unit Components 1 Hardware Overview Satellite/E200/E205 Maintenance Manual 15  KBC/EC (Keyboard Controller/Embedded Controller) A KBC WINBOND WPCE781L chip is used to serve as KBC/EC and Super IO:  KBC  Scan controller function  Interface controller function  EC  Power supply sequence control  Overheat shutdown suppo[...]

  • Page 28

    1 Hardware Overview 1.2 System Unit Components 16 Satellite/E200/E205 Maintenance Manual  Wireless LAN Controller  Support following 3 kinds of mini PCI wireless LAN cards  IEEE 802.11bg  IEEE 802.11ag  IEEE 802.11agn  Data Rate  IEEE 802.11bg: Standard 54M bps  IEEE 802.11ag: Standard 54M bps  IEEE 802.11agn: Standard 13[...]

  • Page 29

    1.3 2.5-inch HDD 1 Hardware Overview 1.3 2.5-inch HDD The computer contains an extremely low-pr ofile, lightweight and high-perform ance HDD. The HDD incorporates 9.5 mm height m agnetic disk and mini-W inchester type magnetic heads. The HDD interface conforms to Seri al ATA. Storage capacities supported are 160, 250, 320, 400 & 500GB. The HDD [...]

  • Page 30

    1 Hardware Overview 1.4 DVD Super Multi (+-R Double Layer) 1.4 DVD Super Multi (+-R Double Layer) The DVD Super Multi drive accepts 12-cm (4.72-in ch) and 8-cm (3.15-inch) discs. At maximum , the drive can play back a DVD at 8x speed, read CD-ROM at 24x speed, and write CD-R at 24x speed, CD-RW at 4x spee d, US CD-RW at 24x speed, High Speed CD- RW[...]

  • Page 31

    1.5 Power Supply 1 Hardware Overview Satellite/E200/E205 Maintenance Manual 19 1.5 Power Supply The power supply unit provides many different volta ges for the system board and perform s the following functions: 1. Power input monitor  Checks whether the DC power supply (AC adapter) is connected to the computer.  Checks whether the battery pa[...]

  • Page 32

    1 Hardware Overview 1.6 Batteries 20 Satellite/E200/E205 Maintenance Manual 1.6 Batteries The computer has the following 3 types of batteries:  Main Battery Pack  Real Time Clock (RTC) Battery Table 1-3 lists the specifications of these batteries. Table 1-3 Battery Specifications Battery Type Material Output voltage Capacity Main Battery Pack[...]

  • Page 33

    1.6 Batteries 1 Hardware Overview Satellite/E200/E205 Maintenance Manual 21 Table 1-4 Quick/Normal Charging Time State Charge Time Off-State Charge 6 Cell About 4 hours max On-State Charge 6 Cell About 4~10 hours max NOTE: The time required for normal charge depends on the power consumption by the system. Using the fluorescent lamp and frequently a[...]

  • Page 34

    2 Troubleshooting 2-i Satellite/E200/E205 Maint enance Manual 2 概要 Chapter 2 Troubleshooting[...]

  • Page 35

    2 Troubleshooting 2-ii Satellite/E200/E205 Maint enance Manual Chapter 2 Contents 2.1 Outline .................................................................................................................... 2-1 2.2 Basic Flowchart ...................................................................................................... 2-2 2.3 Powe[...]

  • Page 36

    2 Troubleshooting Satellite/E200/E205 Maint enance Manual 2-iii 2.10 Finger Print (Optional) ......................................................................................... 2-21 Procedure 1 Test Program Check ................................................................. 2-21 Procedure 2 Connector Check ................................[...]

  • Page 37

    2 Troubleshooting 2-iv Satellite/E200/E205 Maint enance Manual Figures Figure 2-1 Basic Flowchart ............................................................................................. 2-3 Tables Table 2-1 HDD Error Code and Status ........................................................................ 2-13[...]

  • Page 38

    2.1 Outline 2 Troubleshooting Satellite/E200/E205 Maint enance Manual 2-1 2.1 Outline This chapter describes the fault diagn osis proced ures for field replaceable units (FRUs) in the computer. The FRUs covered here are as follows: 1. System board 2. HDD 3. Keyboard 4. Display 5. ODD drive 6. LAN 7. Finger Print 8. Speaker 9. IEEE 1394 10. Cooling [...]

  • Page 39

    2 Troubleshooting 2.2 Basic Flowchart 2-2 Satellite/E200/E205 Maintenance Manual 2.2 Basic Flowchart The basic flowchart in Figure 2-1 serves as a guide for identifying a possibly faulty FRU. Before going through the diagnostic flow chart steps, verify the following:  Ask the user if a password has been register ed and, if so, ask him or her to [...]

  • Page 40

    2.2 Basic Flowchart 2 Troubleshooting Satellite/E200/E205 Maint enance Manual 2-3 Star t Connect the AC Adapter DC IN LED on ?? BATTERY LED on ?? Turn the power on. Any error message displayed ?? Message "In Touch with Tomorrow Toshiba" displayed Follow the power supply diagnostic p rocedure in Section 2.3 N o Follow the power supply diag[...]

  • Page 41

    2 Troubleshooting 2.2 Basic Flowchart 2-4 Satellite/E200/E205 Maintenance Manual Figure 2-1 Basic Flowchart (2/2) Keyboard works well ?? Follow the keyboard diagnostic procedure in Section 2.6 1 N o Insert Bootable CD into ODD Diagnostic Program Loaded ?? Perform each test with the diagnostic program. Any error detected by the diagnostic program ??[...]

  • Page 42

    2.2 Basic Flowchart 2 Troubleshooting Satellite/E200/E205 Maint enance Manual 2-5 If the diagnostic program cannot detect an er ror, the error may be interm ittent. Run the continuous test program repeatedly to isolate th e problem. Check the log utilities function to confirm which diagnostic test detected th e error, then perform the appropriate t[...]

  • Page 43

    2 Troubleshooting 2.3 Power Supply 2-6 Satellite/E200/E205 Maintenance Manual 2.3 Power Supply The power supply in the computer controls ma ny functions and com ponents. To check if the power supply is defective or malfunctioning, foll ow the troubleshooting procedures below as instructed. Procedure 1 Power Icon Check Procedure 2 Connection Check P[...]

  • Page 44

    2.3 Power Supply 2 Troubleshooting Satellite/E200/E205 Maint enance Manual 2-7  DC IN LED DC IN LED Power supply status On in White DC power being su pplie d (from the AC adapter) Off Battery damage and can’t charg e duri ng DC-in. Off Else If the DC IN LED off, follow the steps below: 1. Remove the battery pack and the AC ad apter to shut off[...]

  • Page 45

    2 Troubleshooting 2.3 Power Supply Procedure 2 Connection Check Power is supplied to the system board as illustrated below: AC adaptor System board AC power cord AC adaptor cord Battery pack Follow the steps below to check whether each connector has been connected correctly: Check 1 Make sure the AC adaptor and AC power cord have been firmly plugg [...]

  • Page 46

    2.4 System Board 2 Troubleshooting Satellite/E200/E205 Maint enance Manual 2-9 2.4 System Board To check if the system board is defectiv e or malfunctioning, f ollow the troubleshooting procedures below as instructed. Procedure 1 Message Check Procedure 2 Test Program Check Procedure 3 Replacement Check Procedure 1 Message Check When the power is t[...]

  • Page 47

    2 Troubleshooting 2.4 System Board 2-10 Satellite/E200/E205 Maint enance Manual Procedure 2 Test Program Check The maintenance test program contains seve ral program s for diagnosing the system board and CPU. Execute the following test programs using the procedures described in Chapter 3. 1. System test 2. Memory test 3. Keyboard test 4. Display te[...]

  • Page 48

    2.5 HDD 2 Troubleshooting Satellite/E200/E205 Ma inte nance Manual 2-11 2.5 HDD To check if the 9.5mm or 12.5mm HDD is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Message Check Procedure 2 Partition Check Procedure 3 Format Check Procedure 4 Test Program Check Procedure 5 Connector Ch eck and [...]

  • Page 49

    2 Troubleshooting 2.5 HDD 2-12 Satellite/E200/E205 Maint enance Manual create a DOS partition on drive C. Then restart the computer.. If the problem persists, go to Procedure 3. Check 3 If drive C is listed as active in the FDISK menu, perform Check 4. If drive C is not listed as active, return to the FDISK menu and choose the option to set the act[...]

  • Page 50

    2.5 HDD 2 Troubleshooting Procedure 4 Test Program Check Run the HDD test program stored on the maintena nce test program disk for all test items. See Chapter 3 for details on how to use the test program. If an error is detected during the HDD test, an error code and status will be displayed. The error codes and their status names are listed in Tab[...]

  • Page 51

    2 Troubleshooting 2.5 HDD Procedure 5 Connector Check and Replacement Check The HDD or system board may be faulty. Di sassemble the computer following the steps described in Chapter 4 and perform the following checks: Check 1 Make sure the following connect ors have been firmly connected to the HDD, system board and CPU. HDD System board CPU If any[...]

  • Page 52

    2.6 Keyboard 2 Troubleshooting 2.6 Keyboard To check if the computer’s keyboard is defective or malf unctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Ch eck and Replacement Check Procedure 1 Test Program Check Execute the Keyboard test availa ble as part of the maintenan c[...]

  • Page 53

    2 Troubleshooting 2.8 Display 2.7 Display To check if the computer’s display is def ective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 External Monitor Check Procedure 2 Test Program Check Procedure 3 Connector Ch eck and Replacement Check Procedure 1 External Monitor Check Connect an external monitor[...]

  • Page 54

    2.8 Display 2 Troubleshooting Check 3 The FL may be fault y. Replace it w ith a new one and return to Procedure 3. If there is still an error, perform Check 4. Check 4 The FL inverter board may be fa ulty. Replace it with a new one and return to Procedure 3. If there is still an error, perform Check 5. Check 5 Make sure the LCD/FL cable has been fi[...]

  • Page 55

    2 Troubleshooting 2.9 ODD (O ptical Disk Drive) 2.8 ODD (Optical Disk Drive) To check if the internal ODD drive is defec tive or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 ODD Cleaning Check Procedure 2 Test Program Check Procedure 3 Connector Check and Replacement Check Procedure 1 ODD Cleaning Check 1. [...]

  • Page 56

    2.10 LAN 2 Troubleshooting Satellite/E200/E205 Ma inte nance Manual 2-19 Check 3 The ODD drive may be faulty. Replace the ODD drive with a new one following the steps in Chapter 4. If the ODD drive is still not functio n ing properly, perform Check 4. Check 4 The system board m ay be faulty. Replace it w ith new one following the instructions in Ch[...]

  • Page 57

    2 Troubleshooting 2.9 ODD (O ptical Disk Drive) 2-20 Satellite/E200/E205 Maint enance Manual 2.9 LAN To check if the computer’s LAN is defec tive or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Ch eck and Replacement Check Procedure 1 Test Program Check Execute the[...]

  • Page 58

    Finger Print (Optional) 2.10 Audio Test 2 Troubleshooting Satellite/E200/E205 Ma inte nance Manual 2-21 2.10 Finger Print (Optional) To check if the computer’s Finger Print is defective or m alfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check Procedure 1 Test Program[...]

  • Page 59

    2 Troubleshooting 2.10 Finger Print 2.11 Audio Test To check if the computer’s Speaker is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Ch eck and Replacement Check Procedure 1 Test Program Check Execute the Audio test available as part of th e maintena[...]

  • Page 60

    2.12 IEEE 1394 Test 2 Troubleshooting Satellite/E200/E205 Ma inte nance Manual 2-23 2.12 IEEE 1394 Test To check if the computer’s IEEE 1394 is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check Procedure 1 Test Program Check Execute the IEEE 1394 test[...]

  • Page 61

    2 Troubleshooting 2.13 Cooling Module 2.13 Cooling Module To check if the computer’s cooling module is defective or malfunctioning, f ollow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check and Replacement Check Procedure 1 Test Program Check Execute the Fan On/off test program availabl[...]

  • Page 62

    2.13 Cooling Module 2 Troubleshooting Satellite/E200/E205 Ma inte nance Manual 2-25[...]

  • Page 63

    Chapter 3 Diagnostic Programs[...]

  • Page 64

    3 Diagnostic Programs ii Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual Chapter 3 Contents 3.1 .......................................................................................................................... 1 General 3.2 ......................................................................................[...]

  • Page 65

    3 Diagnostic Programs Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual iii 3.7 ........................................................................................................................ 47 Storage 3.8 .........................................................................................................[...]

  • Page 66

    [...]

  • Page 67

    3.1 General 3 Diagnostic Programs Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 1 3.1 General This chapter explains the dia gnostic programs which tests and di agnoses the functions of the hardware components of this computer. The di agnostic programs can be classified into two types: OPTION and DIAGNOSTIC TEST. NOT[...]

  • Page 68

    3 Diagnostic Programs 3.1 General 2 Satellite E200,Satellite Pro E200 , EQUIUM E200,SATEGO E200 Main tenance Manual Before running the diagnostic programs, get the following tools prepared:  A Service Diagnostic BOOT CD or USB Flash Memory  A Formatted FLOPPY DISK  A Test Media CD (A-BEX TEST CD-R OM TCDR-702)(for CD-ROM test)  A Test M[...]

  • Page 69

    3.2 Quick Start 3 Diagnostic Programs 3.2 Quick Start When the system is booting from Service Diagnostic CD or USB Flash Mem ory, the following screen will be displayed: Please select a test item or select 0 to exit to Free -DOS: 3.2.1 Quick Test When this item is selected, the syste m will run the configured test item s and generate a test report [...]

  • Page 70

    3 Diagnostic Programs 3.2 Quick Start Select ‘Test Mouse’ or press F8 to run the test. The prompt inform ation would be displayed in the screen as below. This test item needs user to verify whether th e mouse works normally. The test result will be displayed in the f ollowing screen: 4 Satellite E200,Satellite Pro E200 , EQUIUM E200,SATEGO E200[...]

  • Page 71

    3.2 Quick Start 3 Diagnostic Programs Here is another method to run the test: Highl ight a test item by us ing arrow keys, then, press Enter to start. If there are parameters pr ovided, user should set para meters in the parameter dialog window. CPU Speed Test (Step by Step): 1. Select test item: Select System — CPU — CPU Speed , then, press th[...]

  • Page 72

    3 Diagnostic Programs 3.2 Quick Start 3. Test Result System will automatically run and display the tes t result as follows: Following is the comparison report of the two testing methods m entioned above: 1) Configuration and Running As to the method used in Mouse test, the user is required to select test items by pressing Space key and set the para[...]

  • Page 73

    3.2 Quick Start 3 Diagnostic Programs As to the method adopted in CPU Speed test , user should highlight the test item and press Enter to start testing. And the user has to setup the parameters every time before running the test. Using this method, only one test item would be tested at one time. 3.2.3 Keyboard Layout test The test purpose is to che[...]

  • Page 74

    3 Diagnostic Programs 3.2 Quick Start It requires user to press the key and ch eck whether the key in the screen changes color or not. User can terminate test by typing ‘ END ’. When testing the ‘ Fn ’ key, it must press the ‘ Enter ’ key at the same time. When the user has checked all the keys and all the keys in the screen have change[...]

  • Page 75

    3.2 Quick Start 3 Diagnostic Programs 3.2.5 Audio Play Test Check whether the system could playback a udio normally. When the test is completed, a file named Audio_P.log will be save d in the defined location. 3.2.6 Audio Record Test Check whether the system could record the sound normally. If there is no error during the whole test, Pass; otherwis[...]

  • Page 76

    3 Diagnostic Programs 3.2 Quick Start User can press any key to exit the program. 3.2.8 DMI Write In addition to reading the DMI information, DMI Write also permits a ttributes editing and updating: Manufacture, Product Name, Ve rsion, Serial Number, and OEM Part Number, etc. The following screen will be d isplayed: In this screen, there are two li[...]

  • Page 77

    3.2 Quick Start 3 Diagnostic Programs attribute’s value in the 2 nd line and press Enter to confirm the current edition and continue editing the next attribute. During the editing, user could press F2 to confirm the DMI attribute update or press F4 to ignore the modification. Press ESC to exit the program of DMI W rite. The confirmation screen is[...]

  • Page 78

    3 Diagnostic Programs 3.2 Quick Start The display of a test program and the set method of PC are shown below. Display of a Test Program The portion which PC and Test -Fixture contact is green. Set method of PC 3 Test1 Judgment If all data is less than ranges, it will b e OK. Z Upper X 12 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 M[...]

  • Page 79

    3.2 Quick Start 3 Diagnostic Programs The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC 4 Test2 Judgment If all data is less than ranges, it will b e OK. Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 13 Rear Uppe r[...]

  • Page 80

    3 Diagnostic Programs 3.2 Quick Start The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC 5 Test3 Judgment If all data is less than ranges, it will b e OK. 14 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Main tenance Manual Right Uppe r[...]

  • Page 81

    3.2 Quick Start 3 Diagnostic Programs The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC 6 Test4 Judgment If all data is less than ranges, it will b e OK. Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 15 Front Uppe r[...]

  • Page 82

    3 Diagnostic Programs 3.2 Quick Start The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC 7 Test5 Judgment If all data is less than ranges, it will b e OK. 8 Inspection Judgment If all data is less than ranges, it will b e OK. 9 Setting Calibration data When an inspection result is O.K.[...]

  • Page 83

    3.2 Quick Start 3 Diagnostic Programs 3.2.10 System Information This function is used to read the system in form ation. When the test is completed, a file named System.log will be saved in the define d lo cation. During the reading process, the following screen will be disp layed to indicate that the progress is in detection: On the left column of [...]

  • Page 84

    3 Diagnostic Programs 3.2 Quick Start User can use function keys listed on the bottom of the screen to display the configuration of the component or exit the current pr ogram. On the left column, the components information is listed and us er can use arrow keys or PgUp/PgDn to view the list and highlight the chosen component. On the right column, t[...]

  • Page 85

    3.2 Quick Start 3 Diagnostic Programs 3.2.12 Exit to Free DOS Select this item to exit to Free DOS. 3.2.13 The Diagn ostics Screen Explanation Below is an example of running a test item. It includes the following parts: Diagnostics Windows, Test Status Area, Progress Bar, Erro r L ist, Test Item’s Title, Status Bar and Message Box. 1. Diagnostics[...]

  • Page 86

    3 Diagnostic Programs 3.2 Quick Start  The error list of each test m odule is displayed at the lower rig ht corner of the screen. It would display the total error quantity found in the test, the most recent five error co des and description would be shown here. Deta iled error report coul d be viewed with Logview.exe.  W hen pressing ESC key [...]

  • Page 87

    3.2 Quick Start 3 Diagnostic Programs Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 21  Script File Name : Script file nam e, e.g. ‘ Custom .INI’ in the above screen;  Current Time(C. TIME) : Current system time, e.g. ‘C.TIME:2008-0 2 -16 00 :42:40’ in the above screen;  Test Time Remaining (LEFT) :[...]

  • Page 88

    3 Diagnostic Programs 3.3Option 3.3 Options 3.3.1 Overview In Service Diagnostics, with the Options menu user can configure the batch parameters, test item’s param eters and t hose parameters created by the L OG file. Options Menu Notes:  Select All/None Items Switch between selecting a ll test items and selecting none. T he hot key is F6 . ?[...]

  • Page 89

    3.3 Option 3 Diagnostic Programs Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 23 Configure batch parameters and a ll the test item’s param eters .  Load Batch Parameters Upload all the test items and the param eters to the *.ini file.  Save Batch Parameters Save all the parameters and the test item s that a[...]

  • Page 90

    3 Diagnostic Programs 3.3Option  Test Order Specify the order of the test items. C hoose 'Sequence' to adopt the sequential mode; choose 'Random' to run the test items in random sequence.  Test Options Choose one of the following options:  Wait On Error Wait for further confirmation while an error occurs.  Break On E[...]

  • Page 91

    3.3 Option 3 Diagnostic Programs Monitor the remaining ba ttery capacity (percent).  Monitor CPU Thermal Monitor the CPU temperature.  Test Mode  LOOPBOUND The chosen test items will run repeated ly accord ing to the times specified in the 'Number of Loops'.  TIMEBOUND The chosen test items will run for an exte nt tim e specif[...]

  • Page 92

    3 Diagnostic Programs 3.3Option Repeat times of the test item.  Interactive If the item is enabled during the test, the te s t items that need user to response can run normally, such as PS2 Mouse te st; If it is disabled, thos e test item s will report FAIL. Whether the option here is enabled, it only affects the current test item.  Parameter[...]

  • Page 93

    3.3 Option 3 Diagnostic Programs In this window, you can specify the .INI files that you wanted to be edited or modified. 3.3.5 Save Batch Parameters Here you can save the edited or modified content to the batch parameters files. Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 27[...]

  • Page 94

    3 Diagnostic Programs 3.3Option 3.3.6 LOG Parameters Setting You can access the Log Parameters screen through Service DiagnosticsOptions - Generate Report.  Report Destination If selecting 'NONE', no log file will be generated ; if selecting 'F ILE', a log file with the name specified in 'Log File Name' will be gen[...]

  • Page 95

    3.3 Option 3 Diagnostic Programs If selecting this parameter, erro rs and time will be recorded only when the test fails.  Append to Old Log File If selecting this parameter, the new lo g will be added to the old one.  Log Device Info on Fail If selecting this parameter, deta ils of the failed test will be reco rded.  Log file Name Specify[...]

  • Page 96

    3 Diagnostic Programs 3.3Option In this screen, you can specify a Log file and view it with the viewer designated in Specify LOG Viewer. 3.3.9 LOG Viewer Service Diagnostic Log viewer:  ↑ , ↓ Scroll a line backward or forward on the screen.  Page Up, Page Down 30 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Main tenance Man[...]

  • Page 97

    3.3 Option 3 Diagnostic Programs Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 31 Scroll a page backward or forward on the screen.  Esc Exit the Log viewer.  F1 Display the Help information about the Log viewer operations and the functional keys.  Ctrl+Home Go to the start of the log file.  Ctrl+End Go t[...]

  • Page 98

    3 Diagnostic Programs 3.3Option 32 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Main tenance Manual Base Memory Test : PASS Extended Memory Test : PASS End Time: Wed Jul 05 10:47:51 2006 <Module Name>: Service Diagnostic Ver 1.00 ... Mouse Test Build Date 2006.01.10 [MSTPad] Begin Time: Wed Jul 05 10:48:54 2006 Touch Pad Test :[...]

  • Page 99

    3.4 Subtests 3 Diagnostic Programs Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 33 3.4 Subtests Test Group Sub Item ID Subtest Test ID Test items Internal Name System 01 CPU 01 Basic Functionality Test [CPUBasicFun] 02 CPU Speed [CPUSpeed] 03 Coprocessor NPU Basic Functions Coprocessor [NPUFun ] 04 CPU Information [...]

  • Page 100

    3 Diagnostic Programs 3.4 Subtests 34 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Main tenance Manual 02 Random Increment Read/Write [RandIncr] 11 Data Bus Test [DataBus] 12 Memory Speed Test [MemSpeed] Storage 01 HDD 01 Sequential/Random R/W [SeqRdRW1] 02 Sequential/Random Seek [Seek1] 03 Performance [Perform1] 04 Controller Check [...]

  • Page 101

    3.4 Subtests 3 Diagnostic Programs Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 35 VESA 1024x768x32 K Mode VESA 1024 x 768 x 16 K Mode VESA 1024 x 768 x32bit Mode [V1024768_32] 04 VESA Video Memory [VESAMEM] 05 AGP Test [AGP] 06 LCD Panel Test [LCDPanel] 07 Register Test [Register] 08 Color Purity Test [ColPurity] [...]

  • Page 102

    3 Diagnostic Programs 3.5 System Test 3.5 System Test Move arrow keys and press the Space key to select CPU test item from Service Diagnostic menu, then highlight CPU and press the Enter to run this test item. Subtest 01 CPU 1. Basic Functionality Test This test item is to check whether the CPU works normally through math and logic calculation, whi[...]

  • Page 103

    3.5 System Test 3 Diagnostic Programs CPU Speed Comparison --Whether you want to make a comparison of the CPU speed with the value set in ‘E xpected CPU Speed’, you should choose ‘Yes’; otherwise, ‘No’. Expected CPU Speed --Specify the expected CPU Speed value you want for further comparison. Allowable Error Rate -- Specify the Allowabl[...]

  • Page 104

    3 Diagnostic Programs 3.5 System Test 5. CPU Protected Mode Test This test item is to check whether CPU protected m ode instruction works normally. 6. MMX The test item is to confirm whether the CPU supports MMX instru ctions. Subtest 02 Boards 1. DMA Controller This test item is to check whethe r the DMA controller works norm ally. 2. Interval Tim[...]

  • Page 105

    3.5 System Test 3 Diagnostic Programs This test item is to check: 1. Whether the current system supports Plug-n-Play; 2. Whether there is an ESCD (Extended System Configuration D ata) in the BIOS; 3. Whether there is PCI-to-ISA bridge in the system; 4. Whether there is PCI bus in the sy stem. 6. ACPI Test ACPI test includes two sub-items as below: [...]

  • Page 106

    3 Diagnostic Programs 3.5 System Test 40 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Main tenance Manual[...]

  • Page 107

    3.6 Memory Test 3 Diagnostic Programs 3.6 Memory Test This test module is to check whet her the m em ory chip works normally. Subtest 01 BIOS ROM This test item is to check the validity of BIOS ROM that in cludes two sub-items -- ROM Read and ROM Write Protection. RO M Read is to check whether BIOS ROM could be correctly read out, ROM Wr ite Protec[...]

  • Page 108

    3 Diagnostic Programs 3.6 Memory Test Pattern Size: Choose the pattern size – BY TE, WORD, DWORD or ALL. Percent (%): Choose the percentage of the defined range of the m emory to be tested. Time Limit(h): Choose or Input the time (hour) of the defined range of the memory to be tested. Time Limit(m): Choose or Input the time (minut e) of the defin[...]

  • Page 109

    3.6 Memory Test 3 Diagnostic Programs Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 43 test coverage would be based on the setting and the value in ‘Percent (%) mentioned at below. Pattern Size: Choose the pattern size – BY TE, WORD, DWORD or ALL. Percent (%): Choose the percentage of the defined range of the m [...]

  • Page 110

    3 Diagnostic Programs 3.6 Memory Test In addition to the above pattern test of th e memory, there is Read/Write Cycle test and Read Cycle Test for the extended memory. Below is the parameter dialog window of the extended pattern test. Test Range: Specify the test coverage range of Extended Memory. If user chooses Total Size, it means that the whole[...]

  • Page 111

    3.6 Memory Test 3 Diagnostic Programs Test by using read instructions. Subtest 05 Walking 1’s Test The test item is to ensure that there is no short circuitry issue in mem ory chip. The parameter dialog window is the same as that in ‘Subtest 02 P attern’. Subtest 06 Walking 0’s Test The test item is to ensure that there is no open circuitry[...]

  • Page 112

    3 Diagnostic Programs 3.6 Memory Test 46 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Main tenance Manual This test item is to check whether the memory could be correctly accessed with randomized memory address an d a series of increm ental data. Subtest 11 Data Bus Test This test item is to check whether the data bus works normally.[...]

  • Page 113

    3.7 Storage 3 Diagnostic Programs 3.7 Storage Subtest 01 HDD This test item runs on IDE hard disks. It checks the functions and performance of IDE hard disk. In order to protect user’s HDD data, the password must be verified before the HDD test. The screen is as follows: Password : hard disk 1. Sequential/Random R/W This test item is to check t[...]

  • Page 114

    3 Diagnostic Programs 3.7 Storage LBA Start, LBA End --Specify the start and end byte in LBA (Large Block Address). Percent —Specify the coverage rate in percentage of the total disk. Time Limit(h): Choose or Input the time (hour) of the defined range of the total disk to be tested. Time Limit(m): Choose or Input the time (minute) of the defined [...]

  • Page 115

    3.7 Storage 3 Diagnostic Programs Percent-- Specify the coverage rate in percentage of the total disk. Time Limit(h): Choose or Input the time (hour) of the defined range of the total disk to be tested; Time Limit(m): Choose or Input the time (minute) of the defined range of the total disk to be tested. 3. Performance Check the HDD’s seeking spee[...]

  • Page 116

    3 Diagnostic Programs 3.7 Storage 50 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Main tenance Manual Subtest 02 ODD The ODD test runs on ID E CDROM/DVD-ROM & CD-RW. It will check the ODD driver’s functionality and perf ormance. 1. Controller Test Check the CDROM controller’s status. 2. Data Transfer Rate Check the data trans[...]

  • Page 117

    3.8 Video 3 Diagnostic Programs 3.8 Video This test item tests the video by: 1. displaying the figures in different graphic modes. 2. displaying the property and color of the characters in different text modes. User will confirm whether each video m ode works normally by judging whether the display is correct. It checks whether the video m emory wo[...]

  • Page 118

    3 Diagnostic Programs 3.8 Video It would display the below texts of th e different attributes in the screen: 1. Text in normal attribute; 2. Text in blinking normal attribute; 3. Text in inverse attribute; 4. Text in blinking inverse attribute; 5. Text in hi-intensity attribute; 6. Text in blinking hi-intensity attribute; Users need to check whethe[...]

  • Page 119

    3.8 Video 3 Diagnostic Programs 4. Text Color This test item is to check whether all 16 colors foreground and all 8 colors background works normally in VGA text mode. The bit4-6 of the attribute byte of a ch aracter defines 8 background colors (black, blue, green, cyan, red, brown, magenta, and light gray), and the bit0-3 defines 16 foreground colo[...]

  • Page 120

    3 Diagnostic Programs 3.8 Video This test item is to check whether 80*25 Text Mode works normally. In the test, user is required to respond according to the instru ction in the screen. Subtest 02 640 * 480 VGA Mode This test item is to check whethe r 680*480 VGA Text mode works normally. In the test, user is required to respond according to the ins[...]

  • Page 121

    3.8 Video 3 Diagnostic Programs Subtest 03 VESA Video Modes This test item is to check whether all the video modes supported by the video card works normally. In the test, user is required to respon d following the instruction in the screen. 1. 640X480 Video Modes Test 2. 800X600 Video Modes Test 3. 1024X768 Video Modes Test Subtest 04 VESA Video M[...]

  • Page 122

    3 Diagnostic Programs 3.8 Video If press Ctrl+Break to force the test to term inate during execution of VESA Video Memory, the test program will not operate and display properly in f urther tests. Subtest 05 AGP Test This test item is to report the system’s Accelerated Graphics Port status and check whether AGP registers works normally. Subtest 0[...]

  • Page 123

    3.8 Video 3 Diagnostic Programs Subtest 07 Register Test This test item is to check whether th e registers of the video adapter works normally. Subtest 08 Color Purity Test This test item is to check whether th e sy stem (the video adapter and the display) could display the purity color of re d, green, blue, black and white. In the test, user is re[...]

  • Page 124

    3 Diagnostic Programs 3.8 Video Subtest 10 DAC/Palette Address This test item is to check the f unction of DAC registers and Palette registers. In the test, user is required to respond according to the instru ction in the screen. 58 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Main tenance Manual[...]

  • Page 125

    3.8 Video 3 Diagnostic Programs Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 59 3.9 Communication (COMM) Subtest 01 LAN Card This test item is to check whether the m odule can detect the exis tence of the network card and display its related information. 1. Device ID Detection Detect the device ID of the network ca[...]

  • Page 126

    3 Diagnostic Programs 3.10 Peripheral 3.10 Peripher al Subtest 01 Keyboard This test item is to check wh ether the keyboard works normally. 1. Keyboard Data Line Test Check whether the keyboard data line works normally. 2. Keyboard Clock Line Test Check whether the keyboard clock line works normally. Subtest 02 Mouse Test Check whether the point de[...]

  • Page 127

    3.10 Peripheral 3 Diagnostic Programs Subtest 03 Led Test 1. Led Test Check whether the green led works normally. Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 61[...]

  • Page 128

    3 Diagnostic Programs 3.10 Peripheral Check whether the orange led works normally. Check whether the HDD led works normally. 62 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Main tenance Manual[...]

  • Page 129

    3.10 Peripheral 3 Diagnostic Programs Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 63[...]

  • Page 130

    3 Diagnostic Programs 3.11Error Codes and Description 64 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Main tenance Manual 3.11 Error Codes and description The format of ‘Error Code’ is ‘ddxxee ’, and ‘dd’ is the device ID (1 ~2 chars), ‘xx’ is test function ID of device (2 chars), ‘ee’ is th e error code of device[...]

  • Page 131

    3.11 Error Codes and Description 3 Diagnostic Programs Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 65 06 Address Test Error Interference between different address channels. Test this memory chip on multiple machines. 07 Toggle Bit Error Errors with the timer chip. As above. 08 Interval Error The acquired refreshin[...]

  • Page 132

    3 Diagnostic Programs 3.11Error Codes and Description 66 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Main tenance Manual 34xx FAN 01 Fan Slow Speed Test Fail The fan slow sp eed test fails. Check the FAN connection. 02 Fan Stop Test Fail The fan stop test fails. As above. 03 Fan Fast Speed Test Fail The fan fast speed test fails. As[...]

  • Page 133

    3.11 Error Codes and Description 3 Diagnostic Programs Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Main tenance Manual 67 19 Register Test Error Physical problems with the video card. Check and see whether the video card has any physical problem. 20 Adapter not support DDC The video card doesn't support DDC. 21 Monitor not suppo[...]

  • Page 134

    3 Diagnostic Programs 3.11Error Codes and Description 68 Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Main tenance Manual 28xx 1394 01 Can not find IEEE1394 controller Don’t support 139 4. 20xx IDE-HDD 01 Get Parameter Fail ! Wrong test parameters are input by user. Reinput the correct parameters. 02 Write Pattern Error HD is damag[...]

  • Page 135

    3.12 Quick Test Item List 3 Diagnostic Programs Satellite E200,Satellite Pro E 200, EQUIUM E200,SATEGO E200 Mai ntenance Manual i 3.12 Quick Test Item List Device Test Items Comment CPU Basic Functionality N PU Basic Functions CPU Information Memory BIOS ROM Cache Memory Bit Stuck High Test 10% or 3 minutes Bit Stuck Low Test 10% or 3 minutes Addre[...]

  • Page 136

    Chapter 4 Replacement Procedures 4 1[...]

  • Page 137

    4 Replacement Procedures 4-ii Satellite/E200/E205 Maintenance Manual[...]

  • Page 138

    4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-iii Chapter 4 Contents 4.1 General ......................................................................... Error! Bookmark not defined. Safety Precautions .................................................. Error! Bookmark not defined. Before You Begin ..............................[...]

  • Page 139

    4 Replacement Procedures 4-iv Satellite/E200/E205 Maintenance Manual Removing the Memory Module ............................. Error! Bookmark not defined. Installing the Memory Module .............................. Error! Bookmark not defined. 4.7 Wireless LAN Card...................................................... Error! Bookmark not defined. R[...]

  • Page 140

    4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-v Removing the Light Sensor Board and Audio Board .......... Error! Bookmark not defined. Installing the Power Board, Switch Board and Logo LED Board ................. Error! Bookmark not defined. 4.17 DC-IN cable, RGB Board and RJ45 cable................... Error! Bookmark not defin[...]

  • Page 141

    4 Replacement Procedures 4-vi Satellite/E200/E205 Maintenance Manual Figures Figure 4-1 Removing the battery pack .................................... Error! Bookmark not defined. Figure 4-2 Removing the Bridge Media .................................. Error! Bookmark not defined. Figure 4-3 Removing the keyboard ....................................[...]

  • Page 142

    4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-vii Figure 4-29 Removing the display mask ................................. Error! Bookmark not defined. Figure 4-30 Removing the LCD module and screws............... Error! Bookmark not defined. Figure 4-31 Removing the LCD module ................................. Error! Bookmark no[...]

  • Page 143

    4.1 General 4 Replacement Procedures 4 1 4.1 General This chapter explains how to disassemble the computer and replace Field Replaceable Units (FRUs). Some replacement procedures m ay not require you to remove all the surrounding FRUs to replace only one FRU. The chart below shows the FRUs in the order in which they should be removed in a top-down [...]

  • Page 144

    4 Replacement Procedures 4.1 General 4-2 Satellite/E200/E205 Maintenance Manual Safety Precautions Before you begin to disassembly read the following safety precautions carefully. Be sure to follow them while you are working. DANGER: 1. Always use the genuine batteries or replacement batteries authorized by Toshiba. Batteries other than those diffe[...]

  • Page 145

    4.1 General 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-3 CAUTION: 1. Before replacing a component, make su re that the replacement component meets the required specifications. To avoid computer failures, never use components that do not meet the specifications. 2. To avoid internal damage such as short circuits and fire, neve[...]

  • Page 146

    4 Replacement Procedures 4.1 General 4-4 Satellite/E200/E205 Maintenance Manual Before You Begin Before you begin to disassembly the computer, keep in m ind the precautions and advice in this section. Always begin disassembly by removing the AC adapter and battery pack. Remove the optional parts and accessories as well. The procedures for removing [...]

  • Page 147

    4.1 General 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-5 Disassembly Procedures The cable connectors come in these two basic types: Pressure plate connectors Normal pin connectors To remove a pressure plate connector, pull up the tabs on either side of the connector's plastic pressure plate and gently pull the cable out [...]

  • Page 148

    4 Replacement Procedures 4.1 General 4-6 Satellite/E200/E205 Maintenance Manual Tools and Equipment For your safety and that of other people in the working environment, it is strongly recommended that you use electrostatic discharge (ESD) equipm ent. The proper use of this equipment will ensure successful repair work and reduce the costs for repair[...]

  • Page 149

    4.1 General 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-7 Colors of Screw Shanks For easy identification of the correct screws, the screw shanks are colored according to their lengths, as follows:  Screws of an even-numbered length Brown  Screws of an odd-numbered length White  Screws of a special length Black Screws [...]

  • Page 150

    4 Replacement Procedures 4.2 Battery Pack/Bridge Media 4.2 Battery Pack/Bridge Media 4.2.1 Battery Pack Removing the Battery Pack Remove the battery pack according to the following procedures and Figure 4-1. CAUTION: When handling the battery packs, use care not to short circuit the terminals. Do not drop, hit, twist, or bend the battery packs. Do [...]

  • Page 151

    4.2 Battery Pack/Bridge Media 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-9 Installing the Battery Pack Install the battery pack according to the following procedures and Figure 4-1. CAUTION: The battery packs contain a lithium ion battery, which can explode due to improper replacement, use, handling, or disposal. Always dispo[...]

  • Page 152

    4 Replacement Procedures 4.2 Battery Pack/Bridge Media 4.2.2 Bridge Media (SD Card / Memory Stick / xDPicture Card) Removing the Bridge Media Remove the Bridge Media according to the following procedures and Figure 4-2, after checking that the computer is turned off in boot mode. 1. Push a Bridge media. It will pop out partly when you release, so p[...]

  • Page 153

    4.2 Battery Pack/Bridge Media 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-11 Installing the Bridge Media Install the Bridge Media according to the following procedures and Figure 4-2, after checking that the computer is turned off in boot mode. 1. Insert a Bridge media and press it until it is securely connected. After the Bri[...]

  • Page 154

    4 Replacement Procedures 4.3 Keyboard 4.3 Key board Removing Keyboard Remove the Keyboard according to the following procedures and Figure 4-3. 1. Release the following 10 latches on the keyboard cover, in that order: - Five bottom latches. - Five front latches. 2. Remove the keyboard cover. 3. Remove two M2.5x2.5 black flat head screws. 4. Disconn[...]

  • Page 155

    4.3 Keyboard 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-13 Installing the Keyboard Install the keyboard according to the following procedures and Figure 4-3. 1. Connect the keyboard cable to CN250 and CN251 on the system board. 2. Secure the keyboard with two M2.5x2.5 black flat head screws. 3. Place the keyboard cover in the[...]

  • Page 156

    4 Replacement Procedures 4.4 Bottom Cover 4-14 Satellite/E200/E205 Maintenance Manual 4.4 Bottom Cover Removing the Bottom Cover Remove the Bottom cover according to the following procedures and Figures 4-5 and 4-6. 1. Release the following 15 latches on the bottom cover, in that order: - Four bottom latches on right sides. - Two latches on right s[...]

  • Page 157

    4.4 Bottom Cover 4 Replacement Procedures Latch Bottom cover Figure 4-4 Removing the bottom cover M2x5 white flat head screw M2x6 black flat head screw Figure 4-5 Removing the screws from the top of the computer M2x5 white flat head screw M2x6 black flat head screw Seal Seal Right side hinge cover M2 5x4 black flat head screw . M2 5x6 black flat he[...]

  • Page 158

    4 Replacement Procedures 4.4 Bottom Cover 4-16 Satellite/E200/E205 Maintenance Manual Installing the Bottom Cover Install the Bottom cover with the display assembly according to the following procedures and Figures 4-5, 4-6. 1. Hold up the bottom cover. 2. Connect the LED board cable from CN205. 3. Connect the RGB board cable from CN204. 4. Seat th[...]

  • Page 159

    4.5 Display Assembly 4 Replacement Procedures 4.5 Display Assembly Removing the Display Assembly Remove the display assembly according to the following procedures and Figures 4-7. 1. Open the display panel at an angle of 90 degrees. 2. Turn the computer upside down. 3. Disconnect the CCD cable from CN2250 on the system board. 4. Disconnect the MIC [...]

  • Page 160

    4 Replacement Procedures 4.5 Display Assembly 4-18 Satellite/E200/E205 Maintenance Manual Installing the Display Assembly Install the display assembly according to the following procedures and Figures 4-7. 1. Place the display panel in the correct position. 2. Connect the CCD cable to CN2250 on the system board. 3. Connect the MIC cable to CN208 on[...]

  • Page 161

    4.6 Memory Module 4 Replacement Procedures 4.6 Memory Module Removing the Memory Module Remove the mem ory module according to the following procedures and Figures 4-8, after checking that the computer is turned off in boot mode. CAUTION: Do not touch the connectors on the memory modules or in the computer. Contaminated connectors can cause memory [...]

  • Page 162

    4 Replacement Procedures 4.6 Memory Module 4-20 Satellite/E200/E205 Maintenance Manual Installing the Memory Module Install the memory m odule according to the following procedures and Figures 4-8, after checking that the computer is turned off in boot mode. Note: The slot A is reserved for main memory . Use the slot B for expanded memory. If only [...]

  • Page 163

    4.7 Wireless LAN Card 4 Replacement Procedures 4.7 Wireless LAN Card Removing the Wireless LAN Card Remove the wireless LAN card according to the following procedures and Figure 4-9. CAUTION : Do not touch the connectors on the wireless LAN card and in the computer with your bare hands. Wireless LAN cards can fail if they are contaminated with swea[...]

  • Page 164

    4 Replacement Procedures 4.7 Wireless LAN Card 4-22 Satellite/E200/E205 Maintenance Manual Installing the Wireless LAN Card Install the wireless LAN card according to the following procedures and Figure 4-9. 1. Insert the wireless LAN card into the CN1300 an angle of 45 degrees. 2. Press down on the wireless LAN card to secure it with one M2x3 blac[...]

  • Page 165

    4.8 HDD 4 Replacement Procedures 4 1 4.8 HDD Removing the HDD Satellite/E200/E205 Maintenance Manual 4-23 CAUTION: Do not press on the top or bottom of the drive. Applying such pressure can either corrupt the data in the drive or damage the drive. Remove the HDD (hard disk drive) according to the following procedures and Figures 4- 10, 4-11. 1. Rem[...]

  • Page 166

    4 Replacement Procedures 4.8 HDD 2. Remove the HDD pack by pulling on the tab attached to the pack. NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails. 3. Place the HDD pack on a flat surface (such as a desk), and remove the four M3x4 black flat head screws. 4. Place the HDD pack [...]

  • Page 167

    4.8 HDD 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-25 Installing the HDD Install the HDD according to the following procedures and Figures 4-10, 4-11. CAUTION: To avoid damage, always hold the HDD only by its sides. 1. Attach the HDD chassis. 2. Secure the HDD and its chassis with the four M3x4 black head screws. CAUTION: To [...]

  • Page 168

    4 Replacement Procedures 4.9 ODD Bay Module 4.9 ODD Bay Module Removing the ODD Bay Module NOTE: The installation and removal procedures are the same for all the modules that can be installed in the ODD bay. See the appropriate sections for the disassembly procedures of specific modules. Remove the ODD bay module according to the following procedur[...]

  • Page 169

    4.9 ODD Bay Module 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-27 Installing the ODD Bay Module Install the ODD bay module according to the following procedures and Figures 4-12. 1. Place the ODD bay module in the correct position and slide it in. 2. Push it in until it clicks into place. 3. Secure the ODD bay module with thre[...]

  • Page 170

    4 Replacement Procedures 4.9 ODD Bay Module Disassembling the ODD Drive NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it fails. Disassemble the ODD drive according to the following procedures and Figure 4-13. 1. Remove four M2x3 black flat head screws. 2. Remove the two brackets. 3.[...]

  • Page 171

    4.10 Bluetooth Module 4 Replacement Procedures 4.10 Bluetooth module Removing the Bluetooth module NOTICE: Don’t touch the double tape surface for keep double tape surface clean and adhesive while remove the Bluetooth module from the ODD bracket. Remove the Bluetooth module according to th e following procedures and Figures 4-14. 1. Disconnect th[...]

  • Page 172

    4 Replacement Procedures 4.10 Bluetooth Module 4-30 Satellite/E200/E205 Maintenance Manual Installing the Bluetooth Module Install the Bluetooth module according to the following procedures and Figures 4-14. 1. Connect the Bluetooth cable to the Bluetooth module. 2. Place the Bluetooth module in the correct position. 3. Secure the Bluetooth module [...]

  • Page 173

    4.11 CPU Cooling Module and Fan 4 Replacement Procedures 4.11 CPU Cooling Module and Fan CAUTION: When removing the cooling module, keep the following in mind: The cooling module can become very hot during operation. Be sure to let it cool down before starting the repair work. Do not touch or cause damage to the fan in the cooling module. Remove th[...]

  • Page 174

    4 Replacement Procedures 4.11 CPU Cooling Module and Fan Figure 4-16 Applying silicon grease Thermal pad CPU cooling module Figure 4-17 Replace new thermal pad into correct position. T ape Thermal pad Figure 4-18 Tear down the tape. 4-32 Satellite/E200/E205 Maintenance Manual[...]

  • Page 175

    4.11 CPU Cooling Module and Fan 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-33 Installing the CPU Cooling Module and Fan Install the cooling Module according to the following procedures and Figures 4-15, 4-16, 4-17 and 4-18. CAUTION: When installing the cooling module, keep the following in mind: 1. Be sure to confirm the corr[...]

  • Page 176

    4 Replacement Procedures 4.12 CPU 4.12 CPU Removing the CPU Remove the CPU according to the following procedures and Figures 4-19, 4-20, 4-21 and 4-22. CAUTION: When removing the CPU, keep the following in mind: The CPU can become very hot during operation. Be sure to let it cool down before starting repair work. NOTE: FOXCONN CPU socket will be 18[...]

  • Page 177

    4.12 CPU 4 Replacement Procedures Installing the CPU Install the CPU according to the following procedures and Figures 4-20, 4-21 and 4-22. 1. Check that the triangle on the cam is in the unlock position. 2. Stick the CPU Mylar on the CPU. 3. Attach the CPU to the correct position in the CPU socket. Align the CPU with the CPU socket by using the tr[...]

  • Page 178

    4 Replacement Procedures 4.12 CPU 4. Secure the CPU by rotating the cam 120 degrees to the right with a flat-blade screwdriver. NOTE: FOXCONN CPU socket will be 180 degrees to the left. Figure 4-22 Securing the CPU 4-36 Satellite/E200/E205 Maintenance Manual[...]

  • Page 179

    4.13 System Board 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-37 4.13 System Board Removing the System Board Remove the System Board according to the following procedures and Figure 4-23, 4-24. 1. Disconnect the light sensor cable from CN202 on system board. 2. Disconnect the RGB cable from CN3050 on system board. 3. Disconnec[...]

  • Page 180

    4 Replacement Procedures 4.13 System Board RGB cable Light sensor cable RJ45 cable CN470 CN3050 CN202 T ouch pad flat cable Switch board flat cable Finger print board cable CN280 CN281 CN209 Figure 4-23 Disconnect from system board Audio board flat cable M2x3 black flat head screw DC IN cable MMB board flat cable CN200 CN6000 CN201 System board Fig[...]

  • Page 181

    4.13 System Board 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-39 Installing the System Board Note: Be careful of the Kill switch knob position for the kill switch. It can be damaged when installing the system board. Make sure its position is same as kill switch on system board.. Install the System Board according to the follow[...]

  • Page 182

    4 Replacement Procedures 4.14 Speakers 4.14 Speakers Removing the Speakers Remove the Speakers according to the following procedures and Figure 4-25. 1. Remove five M2x3 black flat head screws and two M2x2.5 black flat head screws from shield. 2. Remove the shield. 3. Disconnect the speaker cable from CN9801 on the audio board. 4. Remove two M2x3 b[...]

  • Page 183

    4.14 Speakers 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4-41 Installing the Speakers Install the speakers according to the following procedures and Figure 4-25. 1. Seat the left and right speaker in the correct position. 2. Route the speaker cable in the wire guide. 3. Secure the left speaker with two M2x3 black flat head step[...]

  • Page 184

    4 Replacement Procedures 4.15 Switch Board and Finger Print Board 4.15 Switch Board and Finger Print Board Removing Switch Board and Finger Print Board Remove the Switch Board and Finger Print Board according to the following procedures and Figure 4-26. 1. Remove one M2x3 black flat head screw securing the switch board. 2. Remove the switch board. [...]

  • Page 185

    4.15 Switch Board and Finger Print Board 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4 - 43 Installing Switch Board and Finger Print Board Install Switch Board and Finger Print Board to the following procedures and Figure 4-26. 1. Seat the finger print board in the correct position. 2. Seat the touch pad hold in the correct posi[...]

  • Page 186

    4 Replacement Procedures 4.16 Light Sensor Board and Audio Board 4.16 Light Sensor Board and Audio Board Removing the Light Sensor Board and Audio Board Remove the Light Sensor Board and Audio Bo ard according to the following procedures and Figure 4-27. 1. Remove one M2x3 black flat head screw and remove the light sensor board. 2. Remove one M2x3 [...]

  • Page 187

    4.16 Light Sensor Board and Audio Board 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4 - 45 Installing the Power Board, Switch Board and Logo LED Board Install the Light Sensor Board and Audio Board according to the following procedures and Figure 4-27. 1. Seat the light sensor board in the correct position and secure it with the[...]

  • Page 188

    4 Replacement Procedures 4.17 DC-IN cable, RGB Board and RJ45 cable 4.17 DC-IN cable, RGB Board and RJ45 cable Removing DC-IN cable, RGB Board and RJ45 cable Remove the DC-IN cable, RGB Board and RJ45 cable according to the following procedures and Figure 4-28. 1. Remove the DC-IN cable. 2. Remove two M2x3 black flat head screws securing the RGB bo[...]

  • Page 189

    4.17 DC-IN cable, RGB Board and RJ45 cable 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4 - 47 Installing DC-IN cable, RGB Board and RJ45 cable Install the DC-IN cable, RGB Board and RJ45 cable to the following procedures and Figure 4-28. 1. Seat the RJ45 cable in the correct position. 2. Seat IO bracket cover in the correct posi[...]

  • Page 190

    4 Replacement Procedures 4.18 Display Mask 4.18 Display Mask Open Display Mask Removing the Display Mask Disassemble the display mask according to the following procedures and Figure 4-29. 1. Peel off four seal tapes and remove four M2.5x4 white flat head screws securing the display mask. 2. Insert your finger between the edge of display mask and t[...]

  • Page 191

    4.18 Display Mask 4 Replacement Procedures Satellite/E200/E205 Maintenance Manual 4 - 49 Installing the Display Mask Install the display mask according to the following procedures and Figure 4-29. 1. Install the display mask and lock the latches. NOTE: When installing the display mask, ensure there is no gap between the display mask and the display[...]

  • Page 192

    4 Replacement Procedures 4.19 LCD Module 4 - 50 Satellite/E200/E205 Ma intenance Manual 4.19 LCD Module NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LCD module . NOTE: Dispose of used LCD panels as required by local ordinances or regulations . NOTE: The LCD cable must be carefully peeled away befor[...]

  • Page 193

    4.19 LCD Module 4 Replacement Procedures M2x3 black flat head screw M2x3 black flat head screw Left LCD bracket Right LCD bracket LCD module Right LCD bracket cover Left LCD bracket cover M2 5x4 white flat head screw . Figure 4-30 Removing the LCD module and screws 7. Disconnect the LCD cable from LCD module. LCD module LCD cable Figure 4-31 Removi[...]

  • Page 194

    4 Replacement Procedures 4.19 LCD Module Installing the LCD Module NOTE: LCD cable must be carefully peeled away before connecting it from the module. Install the LCD module according to the following procedures and Figures 4-30, 4-31. 1. Turn the LCD upside down. 2. Connect the LCD cable to the LCD module connector. 3. Turn the LCD right side up. [...]

  • Page 195

    4.19 LCD Module 4.20 CCD Board and MIC 4.20 CCD Board and MIC Removing the CCD Board and MIC Remove the FL inverter board according to the following procedures and Figure 4-32. 1. Remove the CCD module with CCD cable from display rear cover. 2. Disconnect the CCD cable from the CCD module connector. CCD module CCD cable MIC cable Display rear cover[...]

  • Page 196

    4 Replacement Procedures 4.20 CCD Board and MIC 4 - 54 Satellite/E200/E205 Ma intenance Manual Installing the CCD Board and MIC Install the FL inverter board according to the following procedures and Figure 4-32. 1. Connect the CCD module cable to CCD module connector. 2. Seat the CCD module, MIC in the correct position.[...]

  • Page 197

    4.21 LED Board and Card Reader Board 4 Replacement Procedure s 4.21 LED Board and Card Reader Board Removing the LED Board and Card Reader Board Remove the LED Board and Card Reader Board according to the following procedures and Figure 4-33. 1. Remove two M2x3 black flat head screws and remove the LED lens. 2. Remove one M2x3 black flat head screw[...]

  • Page 198

    4 Replacement Procedures 4.21 LED Board and Card Reader Board 4 - 56 Satellite/E200/E205 Ma intenance Manual Installing the LED Board and Card Reader Board Install the LED Board and Card Reader Board according to the following procedures and Figure 4-33. 1. Connect the card reader board cable to CN9903 on the card reader board. 2. Seat the card rea[...]

  • Page 199

    6000 1 次 Appendices[...]

  • Page 200

    Appendices App-ii Satellite E200/205 Maintenance Manual Appendix Contents Appendix A Handling the LCD Module .......................................................................... A-1 Appendix B Board Layout ................................................................................................. B-1 B.1 System Board Front View ........[...]

  • Page 201

    Appendices Satellite E200/205 Maintenance Manual App-iii C.22 CN3050 RGB Connector (14-Pin) ................. Error! Bookmark not defined. C.23 CN3150 HDMI Port Connector (19-Pin ) ....... Error! Bookmark not defined. C.24 CN4100 DDR3 So-Dimm0 Connector (204-Pin) ......... Error! Bookmark not defined. C.25 CN4101 DDR3 So-Dimm1 Connector (204-Pin) .[...]

  • Page 202

    Apx. A Handling the LCD Module Appendices Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assem bly or disassembly. Observe the following precautions when handling the LCD module: 1. When installing the LCD module in the LCD cover, be sure to seat it so that it is pro[...]

  • Page 203

    Appendices Apx. A Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recomm end a CRT cleaning agent. Apply the agent to a cloth and then wipe the panel’s surface. Do[...]

  • Page 204

    Apx. A Handling the LCD Module Appendices 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. Satellite E20[...]

  • Page 205

    Appendices Apx. A Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. A-4 Satellite E200/205 Maintenance Manual[...]

  • Page 206

    Apx. A Handling the LCD Module Appendices 9. Do not disassemble the LCD module. Disassem bly can cause malfunctions. 10. If you transport the module, do not use packing m aterial that contains epoxy resin (amine) or silicon glue (alcohol or oxime). These m aterials can release gas that can damage the panel’s polarization. Satellite E200/205 Maint[...]

  • Page 207

    Apx. B Board Layout Appendices Appendix B Appendix B Board Layout B.1 System Board Front View Figure B-1 Board layout (front) Satellite E200/205 Maintenance Manual B-1[...]

  • Page 208

    Appendices Apx. B Board Layout B.2 System Board Back View Figure B-2 Board layout (back) B-2 Satellite E200/205 Maintenance Manual[...]

  • Page 209

    Appendices Apx. C Pin Assignments Appendix C C-3 C.1 CN200 Hot key Connector (6-Pin) .......................................................... C-12 C.2 CN201 Audio Connector (24-Pin) ............................................................. C-5 C.3 CN202 Light sensor BD Connector (4-Pin) .............................................. C-3 C.4 C[...]

  • Page 210

    Appendices Apx. C Pin Assignments C.31 CN9600 RGB BD Connector (14-Pin) .......................................................... C-20 C.32 CN9601 RGB BD to MB Connector (15-Pin) ............................................... C-20 C.33 CN9801 Speaker Connector (4-Pin) .............................................................. C-21 C.34 CN9802[...]

  • Page 211

    Appendices Apx. C Pin Assignments Appendix C Appendix C Pin Assignments System Board C.1 CN200 Hot key Connector (6-Pin) Table C-1 Hot key Connector pin assignments (6-Pin) Pin No Signal Name I/O Pin No. Signal Name I/O 1 +V3LA - 2 +V5A - 3 HOTKEY_INT# O 4 DGND - 5 EC_SMB3_DATA O 6 EC_SMB3_CLK O G1 DGND - G2 DGND - C.2 CN201 Audio Connector (24-Pin[...]

  • Page 212

    Appendices Apx. C Pin Assignments 23 +V5A - 24 +V5A - G1 DGND - G2 DGND - C.3 CN202 Light sensor BD Connector (4-Pin) Table C-3 Light sensor BD Connector pin assignments (4-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 +V3S - 2 EC_SMB3_CLK O 3 EC_SMB3_DATA O 4 DGND - G1 DGND - G2 DGND - C.4 CN204 Card Reader Connector (8-Pin) Table C-4 Car[...]

  • Page 213

    Appendices Apx. C Pin Assignments 11 BAT_OLED# O 12 +V3LA - 13 BAT_BLED1# O 14 DCIN_BLED# O 15 +V5A - 16 +V5LA - 17 DGND - 18 DGND - 19 DGND - 20 DGND - G1 DGND - G2 DGND - C.6 CN208 Internal Micro Phone Connector (2-Pin)) Table C-6 Internal Micro Phone Connector pin assignments (2-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 MIC_IN I 2 D[...]

  • Page 214

    Appendices Apx. C Pin Assignments 13 SCAN_OUT(11) I 14 SCAN_OUT(9) I 15 SCAN_OUT(5) I 16 SCAN_OUT(6) I 17 SCAN_OUT(10) I 18 SCAN_OUT(14) I 19 SCAN_OUT(8) I 20 SCAN_OUT(12) I 21 SCAN_OUT(7) I 22 SCAN_OUT(3) I 23 SCAN_IN(7) O 24 SCAN_IN(2) O 25 SCAN_IN(3) O 26 SCAN_IN(4) O 27 SCAN_IN(0) O 28 SCAN_IN(5) O 29 SCAN_IN(6) O 30 SCAN_IN(1) O 31 +V3S - 32 C[...]

  • Page 215

    Appendices Apx. C Pin Assignments C.11 CN281 Touchpad ON/OFF Connector (4-Pin) Table C-11 Touchpad ON/OFF Connector pin assignments (4-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 +V5S - 2 TP_ON_LED# I 3 TP_ON# I 4 DGND - G1 DGND - G2 DGND - C.12 CN470 RJ45 LAN Port Connector (12-Pin) Table C-12 RJ45 LAN Port Connector pin assignments (12[...]

  • Page 216

    Appendices Apx. C Pin Assignments 19 CLK_R_PCI_DEBUG O 20 WXMIT_OFF# O 21 DGND - 22 PLT_RST# O 23 PCIE_C_RXN_WLAN I 24 +V3S - 25 PCIE_C_RXP_WLAN I 26 DGND - 27 DGND - 28 +V1.5S - 29 DGND - 30 PCH_3A_ALERT_CLK I/O 31 PCIE_C_TXN_WLAN O 32 PCH_3A_ALERT_DAT I/O 33 PCIE_C_TXP_WLAN O 34 DGND - 35 DGND - 36 USB_N_WLAN I/O 37 DGND - 38 USB_P_WLAN I/O 39 +V[...]

  • Page 217

    Appendices Apx. C Pin Assignments 3 SATA_C_TXN_HDD O 4 DGND - 5 SATA_RXN_HDD I 6 SATA_RXP_HDD I 7 DGND - 8 - - 9 - - 10 - - 11 DGND - 12 DGND - 13 DGND - 14 +V5S - 15 +V5S - 16 +V5S - 17 DGND - 18 - - 19 DGND - 20 - - 21 - - 22 - - G1 DGND - G2 DGND - C.16 CN1750 SATA ODD Connector (13-Pin) Table C-16 SATA ODD Connector pin assignments (13-Pin) Pin[...]

  • Page 218

    Appendices Apx. C Pin Assignments A 9 SATA_RXN_ESATA I 10 SATA_RXP_ESATA I 11 DGND - - - - G1 DGND - G2 DGND - G3 DGND - G4 DGND - C.18 CN2000 USB#0 Connector (4-Pin) Table C-18 USB#0 Connector pin assignments (4-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 +USB_VCC0 - 2 USB_L_N_P0 I/O 3 USB_L_P_P0 I/O 4 DGND - P1 DGND - P2 DGND - G1 DGND[...]

  • Page 219

    Appendices Apx. C Pin Assignments 5 DGND - - - - G1 DGND - G2 DGND - C.21 CN3000 LCD Cable Connector (40-Pin) Table C-21 LCD Cable Connector pin assignments (40-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 DGND - 2 LCM_VDDEN O 3 DGND - 4 LCM_VDDEN O 5 DGND - 6 +V3S - 7 LVDS_TXDL0N O 8 LVDS_TXDL1N O 9 LVDS_TXDL0P O 10 LVDS_TXDL1P O 11 LVDS[...]

  • Page 220

    Appendices Apx. C Pin Assignments 1 +VDD_CRT2 - 2 CRTR_R O 3 DGND - 4 CRTG_R O 5 DGND - 6 CRTB_R O 7 DGND - 8 CRT_VSYNC_OUT O 9 DGND - 10 CRT_HSYNC_OUT O 11 - - 12 CRT_DDCDATA_OUT I/O 13 CRT_DDCCLK_OUT I/O 14 - - G1 DGND - G2 DGND - C.23 CN3150 HDMI Port Connector (19-Pin)) Table C-23 HDMI Port Connector pin assignments (19-Pin) Pin No. Signal Name[...]

  • Page 221

    Appendices Apx. C Pin Assignments 7 M_A_DQ(1) I/O 8 DGND - 9 DGND - 10 M_A_DQS#(0) O 11 M_A_DM(0) O 12 M_A_DQS(0) O 13 DGND - 14 DGND - 15 M_A_DQ(2) I/O 16 M_A_DQ(6) I/O 17 M_A_DQ(3) I/O 18 M_A_DQ(7) I/O 19 DGND - 20 DGND - 21 M_A_DQ(8) I/O 22 M_A_DQ(12) I/O 23 M_A_DQ(9) I/O 24 M_A_DQ(13) I/O 25 DGND - 26 DGND - 27 M_A_DQS#(1) O 28 M_A_DM(1) O- 29 [...]

  • Page 222

    Appendices Apx. C Pin Assignments 79 M_A_BS2 O 80 M_A_A(14) I/O 81 +V1.5 - 82 +V1.5 - 83 M_A_A(12) I/O 84 M_A_A(11) I/O 85 M_A_A(9) I/O 86 M_A_A(7) I/O 87 +V1.5 - 88 +V1.5 - 89 M_A_A(8) I/O 90 M_A_A(6) I/O 91 M_A_A(5) I/O 92 M_A_A(4) I/O 93 +V1.5 - 94 +V1.5 - 95 M_A_A(3) I/O 96 M_A_A(2) I/O 97 M_A_A(1) I/O 98 M_A_A(0) I/O 99 +V1.5 - 100 +V1.5 - 101[...]

  • Page 223

    Appendices Apx. C Pin Assignments 151 DGND I/O 152 M_A_DQS#(5) O 153 M_A_DM(5) O 154 M_A_DQS(5) O 155 DGND - 156 DGND - 157 M_A_DQ(42) I/O 158 M_A_DQ(46) I/O 159 M_A_DQ(43) I/O 160 M_A_DQ(47) I/O 161 DGND - 162 DGND - 163 M_A_DQ(48) I/O 164 M_A_DQ(52) I/O 165 M_A_DQ(49) I/O 166 M_A_DQ(53) I/O 167 DGND - 168 DGND - 169 M_A_DQS#(6) O 170 M_A_DM(6) O [...]

  • Page 224

    Appendices Apx. C Pin Assignments 5 M_B_DQ(0) I/O 6 M_B_DQ(5) I/O 7 M_B_DQ(1) I/O 8 DGND - 9 DGND - 10 M_B_DQS#(0) O 11 M_B_DM(0) O 12 M_B_DQS(0) O 13 DGND - 14 DGND - 15 M_B_DQ(2) I/O 16 M_B_DQ(6) I/O 17 M_B_DQ(3) I/O 18 M_B_DQ(7) I/O 19 DGND - 20 DGND - 21 M_B_DQ(8) I/O 22 M_B_DQ(12) I/O 23 M_B_DQ(9) I/O 24 M_B_DQ(13) I/O 25 DGND - 26 DGND - 27 M[...]

  • Page 225

    Appendices Apx. C Pin Assignments 77 - - 78 M_B_A(15) I/O 79 M_B_BS2 O 80 M_B_A(14) I/O 81 +V1.5 - 82 +V1.5 - 83 M_B_A(12) I/O 84 M_B_A(11) I/O 85 M_B_A(9) I/O 86 M_B_A(7) I/O 87 +V1.5 - 88 +V1.5 - 89 M_B_A(8) I/O 90 M_B_A(6) I/O 91 M_B_A(5) I/O 92 M_B_A(4) I/O 93 +V1.5 - 94 +V1.5 O 95 M_B_A(3) I/O 96 M_B_A(2) I/O 97 M_B_A(1) I/O 98 M_B_A(0) I/O 99[...]

  • Page 226

    Appendices Apx. C Pin Assignments 149 M_B_DQ(41) I/O 150 DGND - 151 DGND - 152 M_B_DQS#(5) O 153 M_B_DM(5) O 154 M_B_DQS(5) O 155 DGND - 156 DGND - 157 M_B_DQ(42) I/O 158 M_B_DQ(46) I/O 159 M_B_DQ(43) I/O 160 M_B_DQ(47) I/O 161 DGND - 162 DGND - 163 M_B_DQ(48) I/O 164 M_B_DQ(52) I/O 165 M_B_DQ(49) I/O 166 M_B_DQ(53) I/O 167 DGND - 168 DGND - 169 M_[...]

  • Page 227

    Appendices Apx. C Pin Assignments 3 FAN_TACH1 - - - - G1 DGND - G2 DGND - C.27 CN6000 DC-IN Cable Connector (4-Pin) Table C-27 DC-IN Cable Connector pin assignments (4-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 +VADPTR - 2 +VADPTR - 3 DGND - 4 DGND - C.28 CN6970 Battery Connector (9-Pin) Table C-28 Battery Connector pin assignments (9-P[...]

  • Page 228

    Appendices Apx. C Pin Assignments C.30 CN9500 LED BD Connector (20-Pin) Table C-30 LED BD Connector pin assignments (20-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 +V5S_LED - 2 KILL_SWCH#_DB O 3 WIRELESS_LED#_DB I 4 WIMAX_3G_LED#_DB I 5 +V3S_LED - 6 LED_CARDREADER_L I 7 IDE_LED#_L I 8 +V3A_LED I 9 EC_PWR_OLED#_L I 10 PWR_BLED#_L I 11 BAT[...]

  • Page 229

    Appendices Apx. C Pin Assignments 1 CRTR_R_DB O 2 CRTG_R_DB O 3 CRTB_R_DB O 4 - - 5 GND_CRT - 6 GND_CRT - 7 GND_CRT - 8 GND_CRT - 9 +VDD_CRT2_DB - 10 GND_CRT - 11 - - 12 CRT_DDCDATA_OUT_DB I/O 13 CRT_HSYNC_OUT_DB O 14 CRT_VSYNC_OUT_DB O 15 CRT_DDCCLK_OUT_DB I/O - - - G1 GND_CRT - G2 GND_CRT - C.33 CN9801 Speaker Connector (4-Pin) Table C-33 Speaker[...]

  • Page 230

    Appendices Apx. C Pin Assignments 3 +V5A_DB - 4 +V5A_DB - 5 +V5A_DB - 6 +V3S_CODEC - 7 +V3S_CODEC - 8 AMP_SHUTDOWN_DB I 9 AC97_3S_SDOUT_DB I 10 AC97_3S_SDIN0_DB O 11 AC97_3S_SYNC_DB I 12 AC97_3S_RST#_DB I 13 AC97_3S_BITCLK_DB I 14 GND_AUDIO - 15 USB_OC#_1_DB O 16 SB_USB_1_DB I 17 GND_AUDIO - 18 USB_P_P2_DB I/O 19 USB_N_P2_DB I/O 20 GND_AUDIO - 21 M[...]

  • Page 231

    Appendices Apx. C Pin Assignments Satellite E200/205 Maintenance Manual C-23 37 GND_CARD - 38 GND_CARD - C.37 CN9903 Ca rd Reader BD to MB Connector (8-Pin) Table C-37 Card Reader BD to MB Connector pin assignments (8-Pin) Pin No. Signal Name I/O Pin No. Signal Name I/O 1 +V3S_CARD - 2 +V3S_CARD - 3 CLK_R_CARDREADER_DB I 4 GND_CARD - 5 LED_CARDREAD[...]

  • Page 232

    Keyboard Scan/Character Codes Appendices Satellite E200/205 Maintenance Manua l D-1 Apx. D Keyboard Scan/Character Codes Appendix D Keyboard Scan/Character Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 01 ‘ ~ 29 A9 0E F0 0E 02 1 ! 02 82 16 F0 16 03 2 @ 03 83 1E F0 1E 04 3 # 04 8[...]

  • Page 233

    Appendices Keyboard Scan/Character Codes D-2 Satellite E200/205 Maintenance Manu al Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 29 | 2B AB 5D F0 5D *5 30 Caps Lock 3A BA 58 F0 58 31 A 1E 9E 1C F0 1C 32 S 1F 9F 1B F0 1B 33 D 20 A0 23 F0 23 34 F 21 A1 2B F0 2B 35 G 22 A2 34 F0 34 36 H[...]

  • Page 234

    Keyboard Scan/Character Codes Appendices Satellite E200/205 Maintenance Manua l D-3 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 58 Ctrl 1D 9D 14 F0 14 *3 60 Alt (L) 38 B8 11 F0 11 *3 61 Space 39 B9 29 F0 29 62 ALT (R) E0 38 E0 B8 E0 11 E0 F0 11 75 Ins E0 52 E0 D2 E0 70 E0 F0 70 *1 76 [...]

  • Page 235

    Appendices Keyboard Scan/Character Codes D-4 Satellite E200/205 Maintenance Manu al Table D-1 Scan codes (set 1 and set 2) (4/4) Cap Code set 1 Code set 2 No. Keytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3 123 F12 58 D8 7 F0 7 *3 124 PrintSc *6 *6 *6 *6 *6 126 Pause *7 *7 *7 *7 *7 202 Fn — — — — *4 203 Win E0 5B E0 DB E0 1F E0 [...]

  • Page 236

    Keyboard Scan/Character Codes Appendices Satellite E200/205 Maintenance Manua l D-5 Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Cap No. Key top Make Break Make Brea k 5 5 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 7 5 I NS E0 AA E0 52 E0 D2 E0 2A E0 F0 12 E0 70 E0 F0 70 E0 12 7 6 D E L E0 AA E0 53 E0 D3 E0 2A E0 F0 1[...]

  • Page 237

    Appendices Keyboard Scan/Character Codes D-6 Satellite E200/205 Maintenance Manu al Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No. Key top Make Break Make Break 7 5 I N S E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 7 6 DE L E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71 E0 F0 71 E0 F0 12 79  E0 2A E0 4B E0 CB E0 AA E0 12 E0[...]

  • Page 238

    Keyboard Scan/Character Codes Appendices Satellite E200/205 Maintenance Manua l D-7 Table D-5 Scan codes in overlay mode Code set 1 Code set 2 Cap No. Keytop Make Break Make Break 08 7 (7) 47 C7 6C F0 6C 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7D F0 7D 11 0 (*) 37 B7 7C F0 7C 23 U (4) 4B CB 6B F0 6B 24 I (5) 4C CC 73 F0 73 25 O (6) 4D CD 74 F0 74 26[...]

  • Page 239

    Appendices Keyboard Scan/Character Codes D-8 Satellite E200/205 Maintenance Manu al Table D-7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause Com mo n * E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.[...]

  • Page 240

    Apx. E Key Layout Appendices Apx. E Key Layout Appendix E Key Layout E.1 United States (US) Keyboard Figure E-1 US keyboard E.2 Japan (JP) Keyboard Figure E-2 JP keyboard Satellite E200/205 Maintenance Manua l E-1[...]

  • Page 241

    Appendices Apx E Key Layout E.3 Korean (KR) Keyboard Figure E-3 KR keyboard E.4 Canadian Bilingual (QB) Keyboard Figure E-4 QB keyboard E-2 Satellite E200/205 Maintenance Manual[...]

  • Page 242

    Apx E Key Layout Appendices E.5 Taiwan (TC) Keyboard Figure E-5 TC keyboard E.6 Thai (TH) Keyboard Figure E-6 TH keyboard Satellite E200/205 Maintenance Manua l E-3[...]

  • Page 243

    Appendices Apx E Key Layout E.7 United Kingdom (EN) Keyboard Figure E-7 EN keyboard E.8 UK ENGLISH (CB) Keyboard Figure E-8 TF keyboard E-4 Satellite E200/205 Maintenance Manual[...]